Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
This no longer seems useful. Remove it.
This was prompted by a "cast discards volatile qualifier" warning
in libthr when WARNS=6.
Reviewed by: kib
MFC after: 3 days
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10832
_local_initshells did not reset cp to the beginning of the line buffer
for every iteration that it called fgets(3), leading to writing past the
end of line with fairly long /etc/shells or excessively long line
lengths. Correct this by properly resetting cp.
PR: 192528
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem, jilles
Differential Revision: https://reviews.freebsd.org/D10690
Trivial style(9) fix, no functional change. There are also some 81
characters lines below, but I don't see a good way to shorten them.
Sponsored by: Dell EMC Isilon
Adapt glob's match() routine to use a greedy algorithm that avoids
exponential runtime in byzantine inputs.
While here, add a testcase for the byzantine input.
Prompted by: https://research.swtch.com/glob
Authored by: Yves Orton <demerphq at gmail.com>
Obtained from: Perl (33252c318625f3c6c89b816ee88481940e3e6f95)
Sponsored by: Dell EMC Isilon
The mutex is used in sem_open() and sem_close(), which cannot
recurse. The atfork handlers cannot collide with the open and close
code.
Reviewed by: vangyzen
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D10545
Do not retest for the found semaphore after the loop to look it up.
Instead, handle both cases of last and non-last close simultaneously,
which allows to consolidate the list unlock and successful return.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The sysctl(HW_PAGESIZE) call cannot fail on FreeBSD kernels at least.
And even if it failed for some improbable reason, PAGE_SIZE is a safe
value to return.
Discussed with: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The internal array size goes through a loop and is compared with numitems
which at its limits makes can be unreachably higher than arraysz.
Prevent an hypothetical overflow by matching the types.
MFC after: 1 week
When application reads large directory, calling telldir() for each entry,
like Samba does, it creates exponential performance drop as number of
entries reach tenths to hundreds of thousands. It is caused by full search
through the internal list, that never finds matches in that scenario, but
creates O(n^2) delays. This patch optimizes that search, limiting it to
entries of the same buffer, turning time closer to O(n) in case of linear
directory scan.
PR: 218622
Reviewed by: jhb, jilles
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D10408
of the current usermode implementation of the POSIX semaphores.
For NSEMS_MAX, return -1 without changing errno, which indicates that
the variable has no limit. Before, sysconf(3) returned parameters
queried from the ksem(9) legacy implementation, which apparently has
low defaults for NSEMS_MAX.
Reported and tested by: jbeich
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Implement a new init(8) option in /etc/ttys. If this option is present
on the entry in /etc/ttys, the entry will be active if and only if it
exists. If the name starts with a '/', it will be considered an
absolute path. If not, it will be a path relative to /dev.
This allows one to turn off video console getty that aren't present
(while running a getty on them even when they aren't the system
console). Likewise with serial ports.
It differs from onifconsole in only requiring the device exist rather
than it be listed as one of the system consoles.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10037
If opendir succeeds but malloc fails, numitems was used uninitialized in
error handling under the 'fail' label. If it happened to have a non-zero
value, the NULL 'names' was dereferenced.
Reported by: Coverity
CIDs: 1329566, 1372625
Sponsored by: Dell EMC Isilon
reallocarray(3) is a non portable extension that originated in OpenBSD.
Given that it is already in FreeBSD's libc it is useful for the cases
where reallocation involves a multiplication.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9955
Unsign setlen: it is local and will never be negative. Having one more bit
for growth is beneficial and it avoids a cast when it's going to be used
for allocation.
Reviewed by: ngie
MFC after: 3 days
Rename nitems to numitems: it shares the anme with an existing macro in
sys/params.h. Also initialize the value later which avoids asigning the
value if we exit early.
Reviewed by: ngie
MFC after: 3 days
Dan Krejsa reports a potential memory leak in an fts_build error case,
detected by Coverity. (It doesn't seem to show up in Coverity Scan, so I
don't have a CID to point to.)
I don't know whether it is actually possible to arrive in this case with a
non-empty 'head' list. The cost is low, though. One additional branch in a
terminal error case isn't the end of the world.
PR: 217125
Submitted by: Dan Krejsa <dan.krejsa at gmail.com>
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Also mention <time.h> in sem_timedwait(3), because POSIX does,
and because the user will need it for clockid_t, struct timespec,
and TIMER_ABSTIME.
Reported by: bde
MFC after: 9 days
X-MFC with: r314179
Sponsored by: Dell EMC
This function allows the caller to specify the reference clock
and choose between absolute and relative mode. In relative mode,
the remaining time can be returned.
The API is similar to clock_nanosleep(3). Thanks to Ed Schouten
for that suggestion.
While I'm here, reduce the sleep time in the semaphore "child"
test to greatly reduce its runtime. Also add a reasonable timeout.
Reviewed by: ed (userland)
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9656
This reduces build output, need for recalculating paths, and makes it clearer
which paths are relative to what areas in the source tree. The change in
performance over a locally mounted UFS filesystem was negligible in my testing,
but this may more positively impact other filesystems like NFS.
LIBC_SRCTOP was left alone so Juniper (and other users) can continue to
manipulate lib/libc/Makefile (and other Makefile.inc's under lib/libc) as
include Makefiles with custom options.
Discussed with: marcel, sjg
MFC after: 1 week
Reviewed by: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9207
drain timeout handling to historical freebsd behavior.
The primary reason for these changes is the need to have tty_drain() call
ttydevsw_busy() at some reasonable sub-second rate, to poll hardware that
doesn't signal an interrupt when the transmit shift register becomes empty
(which includes virtually all USB serial hardware). Such hardware hangs
in a ttyout wait, because it never gets an opportunity to trigger a wakeup
from the sleep in tty_drain() by calling ttydisc_getc() again, after
handing the last of the buffered data to the hardware.
While researching the history of changes to tty_drain() I stumbled across
some email describing the historical BSD behavior of tcdrain() and close()
on serial ports, and the ability of comcontrol(1) to control timeout
behavior. Using that and some advice from Bruce Evans as a guide, I've
put together these changes to implement the hardware polling and restore
the historical timeout behaviors...
- tty_drain() now calls ttydevsw_busy() in a loop at 10 Hz to accomodate
hardware that requires polling for busy state.
- The "new historical" behavior for draining during close(2) is retained:
the drain timeout is "1 second without making any progress". When the
1-second timeout expires, if the count of bytes remaining in the tty
layer buffer is smaller than last time, the timeout is extended for
another second. Unfortunately, the same logic cannot be extended all
the way down to the hardware, because the interface to that layer is a
simple busy/not-busy indication.
- Due to the previous point, an application that needs a guarantee that
all data has been transmitted must use TIOCDRAIN/tcdrain(3) before
calling close(2).
- The historical behavior of honoring the drainwait setting for TIOCDRAIN
(used by tcdrain(3)) is restored.
- The historical kern.drainwait sysctl to control the global default
drainwait time is restored, but is now named kern.tty_drainwait.
- The historical default drainwait timeout of 300 seconds is restored.
- Handling of TIOCGDRAINWAIT and TIOCSDRAINWAIT ioctls is restored
(this also makes the comcontrol(1) drainwait verb work again).
- Manpages are updated to document these behaviors.
Reviewed by: bde (prior version)
This argument is not a bitmask of flags, but only accepts a single value.
Fail with EINVAL if an invalid value is passed to 'flag'. Rename the
'flags' argument to getmntinfo(3) to 'mode' as well to match.
This is a followup to r308088.
Reviewed by: kib
MFC after: 1 month
These functions are supposed to return a value between [_2^31, 2^31).
This doesn't seem to work on 64-bit systems, where we return a value
between [0, 3^32). Patch up the function to use proper casts to int32_t.
While there, fix some other style bugs.
MFC after: 2 weeks
Now that the changes to the dirname(3) function had some time to settle,
let's go ahead and use the same approach for replacing basename(3) by a
simple implementation that modifies the input string, thereby making it
thread-safe and guaranteed to succeed.
Unlike dirname(3), this function already had a thread-safe variant
basename_r(3). This function had its own set of problems, like having an
upper bound on the pathname length. Keep this function around for
compatibility, but remove most references from the man page. Make the
man page more similar to that of dirname(3).
As the basename_r(3) function is only provided by FreeBSD (and Bionic),
depending on its use is even more implementation defined than assuming
that basename(3) is thread-safe.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D8382
Specifically, use .Ta instead of tabs to separate column entries. While
here fix a few other things:
- Use .Sy for all column headers (previously only the first column header
was bold)
- Use .Dv to markup constants used for MIB names.
- Use "1234" and "4321" for the byte order descriptions without
thousands separators.
- Mark up header files in the first table with .In.
MFC after: 2 weeks
The setkey() and encrypt() functions are part of XSI, not the POSIX base
definitions. There is no strict requirement for us to provide these,
especially if we're only going to keep these around as undocumented
stubs. The same holds for des_setkey() and des_cipher().
Instead of providing functions that only generate warnings when linking,
simply disallow linking against them. The impact of this is relatively
low. It only causes two leaf ports to break. I'll see what I can do to
help out to get those fixed.
PR: 211626
The sysctl cannot fail. If it does fail on some FreeBSD derivative or
after some future change, just abort() so that the problem will be found
and fixed.
It's preferable to provide an arc4random() function that cannot fail and
cannot return poor quality random data. While abort() is not normally
suitable for a library, it makes sense here.
Reviewed by: ed, jonathan, markm
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8077
It turns out that the path normalization that our brand new copy of
dirname(3) does is actually not allowed by the draft version of the
upcoming version of POSIX. It has to behave identically to the
dirname(1) utility.
This change replaces our new dirname(3) implementation by yet another
version that doesn't implement the path normalization logic; it merely
looks for the end of the directory name and overwrites that with a null
byte.
More details: See note #3370 at http://austingroupbugs.net/view.php?id=1073
PR: 212193
Reviewed by: emaste, jilles
Differential Revision: https://reviews.freebsd.org/D7790
