Remove FPU types from compat/ia32/ia32_reg.h that are no longer needed.
Create machine/npx.h on amd64 to allow compiling i386 code that uses
this header.
The original npx.h and fpu.h define struct envxmm differently. Both
definitions have been included in the new x86 header as struct __envxmm32
and struct __envxmm64. During compilation either __envxmm32 or __envxmm64
is defined as envxmm depending on machine architecture. On amd64 the i386
struct is also available as struct envxmm32.
Reviewed by: kib
After getting the current irql, if the kthread gets preempted and
subsequently runs on a different CPU, the saved irql could be wrong.
Also, correct the panic string.
PR: kern/165630
Submitted by: Vladislav Movchan <vladislav.movchan at gmail.com>
not be ideal, but is the ABI we've shipped so far. Fix macros which reflect
the results of _ALIGN on 32-bit MIPS to use the right alignment.
This fixes sendmsg under COMPAT_FREEBSD32 on n64 MIPS kernels.
using the o32 ABI. This mostly follows nwhitehorn's lead in implementing
COMPAT_FREEBSD32 on powerpc64.
o) Add a new type to the freebsd32 compat layer, time32_t, which is time_t in the
32-bit ABI being used. Since the MIPS port is relatively-new, even the 32-bit
ABIs use a 64-bit time_t.
o) Because time{spec,val}32 has the same size and layout as time{spec,val} on MIPS
with 32-bit compatibility, then, disable some code which assumes otherwise
wrongly when built for MIPS. A more general macro to check in this case would
seem like a good idea eventually. If someone adds support for using n32
userland with n64 kernels on MIPS, then they will have to add a variety of
flags related to each piece of the ABI that can vary. That's probably the
right time to generalize further.
o) Add MIPS to the list of architectures which use PAD64_REQUIRED in the
freebsd32 compat code. Probably this should be generalized at some point.
Reviewed by: gonzo
Add the sysctl debug.iosize_max_clamp, enabled by default. Setting the
sysctl to zero allows to perform the SSIZE_MAX-sized i/o requests from
the usermode.
Discussed with: bde, das (previous versions)
MFC after: 1 month
Vnode-backed mappings cannot be put into the kernel map, since it is a
system map.
Use exec_map for transient mappings, and remove the mappings with
kmem_free_wakeup() to notify the waiters on available map space.
Do not map the whole executable into KVA at all to copy it out into
usermode. Directly use vn_rdwr() for the case of not page aligned
binary.
There is one place left where the potentially unbounded amount of data
is mapped into exec_map, namely, in the COFF image activator
enumeration of the needed shared libraries.
Reviewed by: alc
MFC after: 2 weeks
Code should just use the devtoname() function to obtain the name of a
character device. Also add const keywords to pieces of code that need it
to build properly.
MFC after: 2 weeks
64bit and 32bit ABIs. As a side-effect, it enables AVX on capable
CPUs.
In particular:
- Query the CPU support for XSAVE, list of the supported extensions
and the required size of FPU save area. The hw.use_xsave tunable is
provided for disabling XSAVE, and hw.xsave_mask may be used to
select the enabled extensions.
- Remove the FPU save area from PCB and dynamically allocate the
(run-time sized) user save area on the top of the kernel stack,
right above the PCB. Reorganize the thread0 PCB initialization to
postpone it after BSP is queried for save area size.
- The dumppcb, stoppcbs and susppcbs now do not carry the FPU state as
well. FPU state is only useful for suspend, where it is saved in
dynamically allocated suspfpusave area.
- Use XSAVE and XRSTOR to save/restore FPU state, if supported and
enabled.
- Define new mcontext_t flag _MC_HASFPXSTATE, indicating that
mcontext_t has a valid pointer to out-of-struct extended FPU
state. Signal handlers are supplied with stack-allocated fpu
state. The sigreturn(2) and setcontext(2) syscall honour the flag,
allowing the signal handlers to inspect and manipilate extended
state in the interrupted context.
- The getcontext(2) never returns extended state, since there is no
place in the fixed-sized mcontext_t to place variable-sized save
area. And, since mcontext_t is embedded into ucontext_t, makes it
impossible to fix in a reasonable way. Instead of extending
getcontext(2) syscall, provide a sysarch(2) facility to query
extended FPU state.
- Add ptrace(2) support for getting and setting extended state; while
there, implement missed PT_I386_{GET,SET}XMMREGS for 32bit binaries.
- Change fpu_kern KPI to not expose struct fpu_kern_ctx layout to
consumers, making it opaque. Internally, struct fpu_kern_ctx now
contains a space for the extended state. Convert in-kernel consumers
of fpu_kern KPI both on i386 and amd64.
First version of the support for AVX was submitted by Tim Bird
<tim.bird am sony com> on behalf of Sony. This version was written
from scratch.
Tested by: pho (previous version), Yamagi Burmeister <lists yamagi org>
MFC after: 1 month
to read strings completely to know the actual size.
As a side effect it fixes the issue with kern.proc.args and kern.proc.env
sysctls, which didn't return the size of available data when calling
sysctl(3) with the NULL argument for oldp.
Note, in get_ps_strings(), which does actual work for proc_getargv() and
proc_getenvv(), we still have a safety limit on the size of data read in
case of a corrupted procces stack.
Suggested by: kib
MFC after: 3 days
is compared to an integer, by casting the pointer to l_uintptr_t. No
functional difference on both i386 and amd64.
Reviewed by: ed, jhb
MFC after: 1 week
definition from K&R to ANSI, to avoid a clang warning about the uint8_t
parameter being promoted to int, which is not compatible with the type
declared in the earlier prototype.
MFC after: 1 week
and proc_getenvv(), which were implemented using linprocfs_doargv() as
a reference.
Suggested by: kib
Reviewed by: kib
Approved by: des (linprocfs maintainer)
MFC after: 2 weeks
system calls to provide feed-forward clock management capabilities to
userspace processes. ffclock_getcounter() returns the current value of the
kernel's feed-forward clock counter. ffclock_getestimate() returns the current
feed-forward clock parameter estimates and ffclock_setestimate() updates the
feed-forward clock parameter estimates.
- Document the syscalls in the ffclock.2 man page.
- Regenerate the script-derived syscall related files.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
The current code mixes the use of `flags' and `mode'. This is a bit
confusing, since the faccessat() function as a `flag' parameter to store
the AT_ flag.
Make this less confusing by using the same name as used in the POSIX
specification -- `amode'.
it can be used by in-kernel consumers.
- Make kern_posix_fallocate() public.
- Use kern_posix_fadvise() and kern_posix_fallocate() to implement the
freebsd32 wrappers for the two system calls.
to match native struct timespec ABI on __LP32__.
This change is a prerequisite for upcoming futimens()/utimensat() in whose
implementations it is assumed that timespec32 can take a negative value.
MFC after: 1 week
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
madvise(2) except that it operates on a file descriptor instead of a
memory region. It is currently only supported on regular files.
Just as with madvise(2), the advice given to posix_fadvise(2) can be
divided into two types. The first type provide hints about data access
patterns and are used in the file read and write routines to modify the
I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are
thus filesystem independent. Note that to ease implementation (and
since this API is only advisory anyway), only a single non-normal
range is allowed per file descriptor.
The second type of hints are used to hint to the OS that data will or
will not be used. These hints are implemented via a new VOP_ADVISE().
A default implementation is provided which does nothing for the WILLNEED
request and attempts to move any clean pages to the cache page queue for
the DONTNEED request. This latter case required two other changes.
First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests
vinvalbuf() to only flush clean buffers for the vnode from the buffer
cache and to not remove any backing pages from the vnode. This is
used to ensure clean pages are not wired into the buffer cache before
attempting to move them to the cache page queue. The second change adds
a new vm_object_page_cache() method. This method is somewhat similar to
vm_object_page_remove() except that instead of freeing each page in the
specified range, it attempts to move clean pages to the cache queue if
possible.
To preserve the ABI of struct file, the f_cdevpriv pointer is now reused
in a union to point to the currently active advice region if one is
present for regular files.
Reviewed by: jilles, kib, arch@
Approved by: re (kib)
MFC after: 1 month
exposed by the security fix in FreeBSD-SA-11:05.unix.
Approved by: so (cperciva)
Approved by: re (kib)
Security: Related to FreeBSD-SA-11:05.unix, but not actually
a security fix.
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
A "process descriptor" file descriptor is used to manage processes
without using the PID namespace. This is required for Capsicum's
Capability Mode, where the PID namespace is unavailable.
New system calls pdfork(2) and pdkill(2) offer the functional equivalents
of fork(2) and kill(2). pdgetpid(2) allows querying the PID of the remote
process for debugging purposes. The currently-unimplemented pdwait(2) will,
in the future, allow querying rusage/exit status. In the interim, poll(2)
may be used to check (and wait for) process termination.
When a process is referenced by a process descriptor, it does not issue
SIGCHLD to the parent, making it suitable for use in libraries---a common
scenario when using library compartmentalisation from within large
applications (such as web browsers). Some observers may note a similarity
to Mach task ports; process descriptors provide a subset of this behaviour,
but in a UNIX style.
This feature is enabled by "options PROCDESC", but as with several other
Capsicum kernel features, is not enabled by default in GENERIC 9.0.
Reviewed by: jhb, kib
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
