When building the arm64 kernel for use with dtrace or hwpmc we need
to include a stack frame so they can extract a stack trace.
As with amd64 also build a stack frame in modules.
Sponsored by: Innovate UK
Stop trying to manually calculate RID, which cannot be done correctly
by PCI_DEVFN(). Use PCI_GET_RID() method instead.
Do not use pci_find_dbsf() to go from the linux pci_dev to freebsd
device_t. First, device is readily available as dev.bsddev. Second,
using pci_find_dbsf() fails for ARI-enabled functions with large
function numbers, because PCI_SLOT()/PCI_FUNC() are for non-ARI.
Reviewed by: bz, hselasky, manu
Tested by: manu (drm)
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27960
- Suppress -Wredundant-decls. Ultimately this warning is harmless in
any case, and it does not look like there is a simple way to avoid
redundant declarations in this case without a lot of header pollution
(e.g. having openzfs's shim param.h pulling in sys/kernel.h for hz).
- Suppress -Wnested-externs, which is useless anyway.
Unfortunately it was not sufficient just to modify OPENZFS_CFLAGS,
because the warning suppressions need to appear on the command line
after they are explicitly enabled by CWARNFLAGS from sys/conf/kern.mk,
but OPENZFS_CFLAGS get added before due to use of -I for the shims.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27685
Similar to r366897, this uses the .incbin directive to pull in a
firmware file's contents into a .fwo file. The same scheme for
computing symbol names from the filename is used as before to maximize
compatiblity and not require rebuilding existing .fwo files for
NO_CLEAN builds. Using ld -o binary requires extra hacks in linkers
to either specify ABI options (e.g. soft- vs hard-float) or to ignore
ABI incompatiblities when linking certain objects (e.g. object files
with only data). Using the compiler driver avoids the need for these
hacks as the compiler driver is able to set all the appropriate ABI
options.
Reviewed by: imp, markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27579
This directory doesn't exist and causes gcc-6.4 to complain about
a non-existent include directory
Approved by: kevans, imp
Differential Revision: https://reviews.freebsd.org/D26846
Add backlight function to linuxkpi.
Graphics drivers expose the backlight of the panel directly so allow them to use the backlight subsystem so
user can use backlight(8) to configure them.
Reviewed by: hselasky
Relnotes: yes
Differential Revision: The FreeBSD Foundation
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
Ports bsd.kmod.mk explicitly sets MK_KERNEL_SYMBOLS=no to prevent auto-
splitting of debuginfo from kernel modules. If that knob is set, don't
split out a .ko.debug and .ko from .ko.full; just generate a .ko with
debuginfo and leave it be.
Otherwise, with DEBUG_FLAGS set and MK_KERNEL_SYMBOLS=no, we would helpfully
strip out the debuginfo from the .ko.full and then not install it. That is
not the desired result a WITH_DEBUG port kmod build.
Reviewed by: emaste, jhb
Differential Revision: https://reviews.freebsd.org/D24835
-development is long and awkward, and is also inconsistent with prior art
from the Linux world, which uses -dev (Debian) or -devel (Red Hat). Follow
the Debian convention, and similarly for debug info packages.
Also remove redundant pkgbase development tag from includes. We already tag
include files with package=runtime,dev; there is no need to separately tag
them as dev.
Discussed with: bapt
Reviewed by: manu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24139
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
-fno-common will become the default in GCC10/LLVM11. Plenty of work has been
put in to make sure our world builds are no -fno-common clean, so let's slap
the build with this until it becomes the compiler default to ensure we don't
regress.
At this time, we will not be enforcing -fno-common on ports builds. I
suspect most ports will be or quickly become -fno-common clean as they're
naturally built against compilers that default to it, so this will hopefully
become a non-issue in due time. The exception to this, which is actually the
status quo, is that kmods built from ports will continue to build with
-fno-common.
As of the time of writing, I intend to also make stable/12 -fno-common
clean. What's been done will be MFC'd to stable/11 if it's easily applicable
and/or not much work to massage it into being functional, but I anticipate
adding -fcommon to stable/11 builds to maintain its ability to be built with
newer compilers for the rest of its lifetime instead of putting in a third
branch's worth of effort.
Centralize the list of generated files required by linuxkpi consumers,
into the common variable. This way, consumers that use the variable
are insulated from possible changes in the list.
Reviewed by: hselasky, imp
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24137
For untied module builds, we'll generate opt_foo headers if they're included
in SRCS. However, options that would normally be represented in opt_global.h
aren't properly represented.
Start generating opt_global.h with #define VIMAGE for !mips since it's
almost universally a project default and right now kmods must hack it in
themselves in order to be properly compiled for the default kernel. For
example, ^/sys/modules/pf/Makefile
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D23345
To improve reliability of kernel modules after the clang switch, switch to
-fPIC when building for now.
This bypasses some limitations to the way clang and LLD handle relocations,
and is a more robustly tested compilation regime than the
"static shared object" mode that we were previously attempting to convince
the compiler stack to use.
The kernel linker was recently augmented to be able to handle this mode.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22798
This Makefile sets KERN_OPTS. This permits kernel module Makefiles to
use KERN_OPTS to control the value of variables such as SRCS that are
used by bsd.kmod.mk for KERN_OPTS values that honor WITH/WITHOUT
options for standalone builds.
In the past, we would add symbolic links for MACHINE_CPUARCH when it differed
from MACHINE. This was for pc98 only, however. All other architectures didn't
need this and it was really due to pc98 pulling from i386 rather than something
more intrinsic. At the time, we had the split we did to mimic what NetBSD did
for its 68k ports where many different kernels were possible for the same
architecture. Since then, both projects have moved away from this convention to
having a more generic MACHINE for each architecture. FreeBSD's new arm64/aarch64
breaks this old notion and so was an exception to the rule. So, we no longer
need to create this link for any old machine or any new machine, delete it
entirely.
Differential Revision: https://reviews.freebsd.org/D22246
Use a separate make variable to specify the linker script so that it is
only applied at link time and not during intermediate generation of .fwo
files.
This ensures that the .text padding inserted by the amd64 linker script
is applied to the stub module load handlers embedded in firmware
modules.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22125
Automatically apply ldscript.kmod.${MACHINE_ARCH} if it exists.
We already have an i386-specific linker script; rename it accordingly.
Note that the linker script is applied when the object files are
partially linked. (For amd64 this is also the final link.)
Reviewed by: imp, kib
Discussed with: jhb
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21887
binaries (e.g. on any arch except amd64 and mips).
Otherwise, with lld 9, after https://reviews.llvm.org/rLLD356117, the
modules will get an additional PT_LOAD segment, which blows up kldxref,
since that has a hardcoded limit of 3 segments.
I could have alternatively bumped up that limit, but since kernel
modules do not use relro, the simplest workaround is to explicitly
disable it.
As part of marching gcc 4.2.1 out of the tree, turn off -Werror on gcc 4.2.1
compiles by default. It generates too many false positives and breaks CI
for no benefit.
Discussed on: arch@
Reviewed by: jhb@, emaste@, pfg@
Differential Revision: https://reviews.freebsd.org/D21378
with an eventual goal to convert all legacl zlib callers to the new zlib
version:
* Move generic zlib shims that are not specific to zlib 1.0.4 to
sys/dev/zlib.
* Connect new zlib (1.2.11) to the zlib kernel module, currently built
with Z_SOLO.
* Prefix the legacy zlib (1.0.4) with 'zlib104_' namespace.
* Convert sys/opencrypto/cryptodeflate.c to use new zlib.
* Remove bundled zlib 1.2.3 from ZFS and adapt it to new zlib and make
it depend on the zlib module.
* Fix Z_SOLO build of new zlib.
PR: 229763
Submitted by: Yoshihiro Ota <ota j email ne jp>
Reviewed by: markm (sys/dev/zlib/zlib_kmod.c)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19706
This was lost in r335910 for some reason.
This also fixes a META_MODE rebuild issue in some modules [1].
MFC after: 2 weeks
Reported by: npn [1]
Sponsored by: DellEMC
Apply a linker script when linking i386 kernel modules to apply padding
to a set_pcpu or set_vnet section. The padding value is kind-of random
and is used to catch modules not compiled with the linker-script, so
possibly still having problems leading to kernel panics.
This is needed as the code generated on certain architectures for
non-simple-types, e.g., an array can generate an absolute relocation
on the edge (just outside) the section and thus will not be properly
relocated. Adding the padding to the end of the section will ensure
that even absolute relocations of complex types will be inside the
section, if they are the last object in there and hence relocation will
work properly and avoid panics such as observed with carp.ko or ipsec.ko.
There is a rather lengthy discussion of various options to apply in
the mentioned PRs and their depends/blocks, and the review.
There seems no best solution working across multiple toolchains and
multiple version of them, so I took the liberty of taking one,
as currently our users (and our CI system) are hitting this on
just i386 and we need some solution. I wish we would have a proper
fix rather than another "hack".
Also backout r340009 which manually, temporarily fixed CARP before 12.0-R
"by chance" after a lead-up of various other link-elf.c and related fixes.
PR: 230857,238012
With suggestions from: arichardson (originally last year)
Tested by: lwhsu
Event: Waterloo Hackathon 2019
Reported by: lwhsu, olivier
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D17512
Add a CAM-Newbus SDIO support module. This works provides a newbus
infrastructure for device drivers wanting to use SDIO. On the lower end
while it is connected by newbus to SDHCI, it talks CAM using the MMCCAM
framework to get to it.
This also duplicates the usbdevs framework to equally create sdiodev
header files with #defines for "vendors" and "products".
Submitted by: kibab (initial work, see https://reviews.freebsd.org/D12467)
Reviewed by: kibab, imp (comments on earlier version)
MFC after: 6 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19749
install -> ${INSTALL}
mtree -> ${MTREE_CMD}
services_mkdb -> ${SERVICES_MKDB_CMD}
cap_mkdb -> ${CAP_MKDB_CMD}
pwd_mkdb -> ${PWD_MKDB_CMD}
kldxref -> ${KLDXREF_CMD}
If you do custom FreeBSD builds you may want to override those
in some cases.
Sponsored by: Sippy Software, Inc.
We were doing so as a workaround for the problem addressed by r345593, so
it's no longer necessary.
Reviewed by: jhb
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19705
The kernel build uses symlinks to make MD #includes like <machine/pcpu.h>
work. Debug info ends up referencing these symlinks in a relative path,
so debuggers generally don't know how to find the corresponding headers.
Address this by using -fdebug-prefix-map to map relative paths through
the symlinks to their absolute paths in the source tree. This is
consistent with how regular source file paths are defined in the
kernel's debug info.
Also map the current directory to an absolute path to the object
directory. This gives debuggers a chance to find auto-generated files
like vnode_if.c if the object directory is available.
Reviewed by: emaste, jhb (previous version)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19633
add gcov support and export results as files in debugfs
Reviewed by: hps@
MFC after: 1 week
Sponsored by: iX Systems
Differential Revision: https://reviews.freebsd.org/D19260
This allows us to build the ubsan code added in r340189 into the kernel
with the KUBSAN option. This will report when undefined behaviour is
detected in the currently running kernel.
As it can be large, the kernel is 65MB on arm64, loader may not be able to
load the kernel on all architectures so is disabled by default for now.
Sponsored by: DARPA, AFRL
- inline atomics in modules on i386 and amd64 (they were always
inline on other arches)
- allow modules to opt in to inlining locks by specifying
MODULE_TIED=1 in the makefile
Reviewed by: kib
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16079
This was inadvertently overriding the first found SYSDIR with the last
of /usr/src which could result in the wrong headers being used if not
building from /usr/src.
SYSDIR?= is not used here to avoid evaluating the exists() when unneeded.
Reported by: rgrimes, sjg, Mark Millard
Pointyhat to: bdrewery
Sponsored by: Dell EMC
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
EXPORT_SYMS can be set to YES, NO, a list of symbols to export from a
module, or to a filename containing such a list. For the case that it
is set to a symbol list, replace spaces in the list with newlines, so
the created file is in the format expected by kmod_syms.awk.
Reviewed by: imp, jhb
MFC after: 1 month
Sponsored by: Turing Robotic Industries Inc.
Differential Revision: https://reviews.freebsd.org/D14284
Both flags do the same thing but -n is more widely supported.
Reviewed By: jhb, emaste
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D13936
