Commit Graph

429 Commits

Author SHA1 Message Date
Matt Jacob
c7abe45ece Because we added 4 bytes to the inquiry data size, we need to
rev the CAM revision too. Tsk.
Submitted by:	ken@freebsd.org
2000-01-25 21:24:52 +00:00
Matt Jacob
c19cf05d0d Redo the SHORT INQUIRY length stuff to be a bit cleaner.
Obtained from:gibbs@freebsd.org
2000-01-25 18:25:22 +00:00
Kenneth D. Merry
56e3e24bfd When autosense fails, make sure we retry the command.
PR:		kern/15975
Submitted by:	Carl Mascott <cmascott@world.std.com>, n_hibma
2000-01-25 17:45:02 +00:00
Matt Jacob
937097d9cc Propagate sense data through from SIM (if there) and mark the CTIO
that there's sense to send with status (if the SIM does it), and
then clear any pending contingent allegiance state for this initiator
if the SIM actually did send the sense data.

Widen MAX_INITITATORS to 256- that's still not quite right, but will
accomodate the widest Fibre Channel support in FreeBSD now.

Obtained from:(partially) gibbs@freebsd.org
2000-01-25 17:42:27 +00:00
Matt Jacob
471da22662 Propagate sense data through from SIM (if there) and mark the CTIO
that there's sense to send with status (if the SIM does it).
Reviewed by:	gibbs@freebsd.org
2000-01-25 17:39:09 +00:00
Matt Jacob
366f55288e Go for the gusto and do the full 256 bytes for inquiry data.
Obtained from:gibbs@freebsd.org
2000-01-25 17:37:02 +00:00
Peter Wemm
75f51904b5 A minimal update to the device wiring code so that it looks at the
dynamic resource tables rather than relying on a duplicated cam-specific
table generated by config(8) in ioconf.c.  This was a major holdup to
getting loader / userconfig driven configuration of scsi wiring.
2000-01-23 18:03:38 +00:00
Matt Jacob
090fbb8802 Clean up some of the SAF-TE matching code. Add
a few missing newlines in printouts.
2000-01-21 21:14:42 +00:00
Matt Jacob
10b6172afb Do the minor changes needed because of change to ccb_getdev structure.
JKH Trading Stamps applied.

Reviewed by:	gibbs@freebsd.org, ken@freebsd.org
2000-01-17 06:27:37 +00:00
Matt Jacob
ab6eec3ad9 Increase size of the scsi_inquiry_data structure to it's nearly
full size. Define a SHORT_INQUIRY_LENGTH for use during initial
probing (covers the size used previously). Define some SPC-2 related
fields (and define the revision code for SPC-2) which includes some
further SPI-3 defines. Don't go all the way (256 bytes) for the structure-
stop 4 bytes short- because we haven't auditted the source base to find
any u_int8_t potential overflow issues. Add RBC (single byte device)
and OCR (Optical Character Reader) device type codes.

Approved by JKH.

Reviewed by:	gibbs@freebsd.org, ken@freebsd.org
2000-01-17 06:24:35 +00:00
Matt Jacob
9ec5d7cd35 Remove garbage collected tags from their usage in the ccb_getdev
structure. Remove usage of the (now gone) pd_type tag of same.

Add an extra probing state such that if we successfully run an
initial inquiry (36 bytes), rerun another one with a longer data
size as informed by the 'additional length' field in the first
returned inquiry data (making sure not to get bigger than the
actual scsi_inquiry_data structure- which has also been modified-
see separate checkin of scsi_all.h). This allows devices such
as SAF-TE devices (which have identifying marks in offsets 48-53
in inquiry data) to be successfully found without special case
inquiry commands. There are also a lot of other things such as
version codes that are coming in in the SPC2 specification that it
would be useful to get our hands on.

Reviewed by:	gibbs@freebsd.org, ken@freebsd.org
2000-01-17 06:20:08 +00:00
Matt Jacob
826eb7c840 Shift bits for CAM flags so that the top bit isn't set in an enum
(at request of Ken Merry). Garbage collect items out of the ccb_getdev
structure and and a length field so that consumes will know how much
of the inq_data tag is valid. Clean up a few misspellings. Add
a CAM_SEND_STATUS target mode flag.

All of this necessitated a CAM_VERSION bump.

JHK approved.

Reviewed by:	gibbs@freebsd.org, ken@freebsd.org
2000-01-17 06:15:35 +00:00
Matt Jacob
5fd6140dfa Add a CAM_SENT_STATUS for use in target mode. JHK approved.
Reviewed by:	gibbs@freebsd.org, ken@freebsd.org
2000-01-17 06:11:33 +00:00
Matt Jacob
8d9e6c80ca Do not propagate the ENCI_SVALID bit for overall enclosure status
to userland apps- they get confused.
2000-01-17 02:02:41 +00:00
Matt Jacob
6da094e967 Add in SAF-TE handling code and do some minor consistency cleanups. 2000-01-17 00:36:28 +00:00
Matt Jacob
982ab0744f buglet fix 2000-01-15 23:05:29 +00:00
Matt Jacob
c8c54c88ae Do a wad of cleanup and put into place at least *one* functional
portion of SES retrieval (native SES itself) and implement all
the appropriate ioctls. Seems to work...
2000-01-15 22:41:27 +00:00
Matt Jacob
92ebdff04b Move the kernel specific stuff into scsi_ses.c. Redo the ioctls
to be more platform independent. Add a ses_hlptxt structure definition
and retrieval ioctl for when we are able to retrieve object help text

SES Objects can have up to 64 KBytes of associated 'help' text- the
Sun A5000 uses this, for example, to give physical location information
(e.g., 'left power supply').
2000-01-15 22:40:04 +00:00
Matt Jacob
121ac7c9a2 add SEND/RECEIVE diagnostic opcodes, SEND is a Mandatory command 2000-01-15 19:05:29 +00:00
Matt Jacob
4092880e7f Remove inclusion of dkbad.h- seems like a bug, but I had a stale
dkbad.h in /usr/include/sys- the local build process shouldn't have
been happy with that, but not finding dkbad.h in ../../sys. Hmm.
2000-01-15 07:39:05 +00:00
Matt Jacob
69ad2fbe7e add functional but stub SES/SAF-TE driver 2000-01-15 07:09:12 +00:00
Justin T. Gibbs
434bbf6e63 Clean up the xpt_sim creation to mirror how HBA drivers perform this task.
Clean up node creation in the EDT so that initialization follows member
declaration.

Sort registered paths by pathid so that we probe busses in order of
ascending pathid.  This makes hardwiring of busses without wiring
individual targets do what the user expects. (submitted by tegge@FreeBSD.org)

Fix an EDT node leak.  Target nodes would never go away.

Implement xpt_bus_deregister().
(prodded by some patches from T. Ichinoseki, but implemented differently.)
2000-01-14 23:08:46 +00:00
Matt Jacob
2759b3c7c4 Widen width of tag && initiator ids to u_int
(from u_int8_t) in ccb_accept_tio structure. This
matches usage elsewhere and also allows me to
overload the tag id with the RX_ID for fibre
channel target mode.
Reviewed by:	gibbs@freebsd.org
2000-01-03 08:54:51 +00:00
Matt Jacob
b6fd7c6188 Change error message make sense and add a missing
periph_release on a failed open so that the periph
dtor for it will get called when we deallocate the
instance from targioctl.
1999-12-30 02:32:13 +00:00
Matt Jacob
72c968cec7 Restore this driver to a working state. The control device has
to be created at init time. The unit devices are created at
ctor when new instances are created and bound and destroyed
when that instance is closed. As such, there is just s single
static control dev_t for this driver (the per-unit dev_t's are
still in the softc).

When we have decommissionable periph drivers, a destroy_device
on the control device will have to called.
1999-12-29 22:55:01 +00:00
Peter Wemm
c447342094 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 05:07:58 +00:00
Peter Wemm
664a31e496 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 04:46:21 +00:00
Matt Jacob
b6a0d1ab0c Make sure we don't look at an edt entry that could go away when we try
and figure out whether to probe higher than logical unit 7.
Obtained from:gibbs@freebsd.org
1999-12-20 16:16:53 +00:00
David E. O'Brien
a5a299e5d7 Add FAST-80 timing to the scsi syncrates table.
Submitted by:	Gerard Roudier <groudier@club-internet.fr>
1999-12-16 16:04:54 +00:00
Matt Jacob
cda9006f07 minor comment update 1999-12-13 19:40:00 +00:00
Kenneth D. Merry
223b7a2363 Quirk all Pioneer changers as changers up front, instead of waiting for the
second LUN to show up.

mjacob's change (which is correct) in rev 1.21 of cam_periph.c to elminiate
infinite retries of the SCSI busy status bit seems to have broken probing
of Pioneer changers that aren't already quirked.

The right way to fix this is probably to change things around so we can
guarantee 100% sequential probing of LUN-based changers even if they aren't
quirked.  This should fix things for now, though.
1999-12-11 23:00:44 +00:00
Kenneth D. Merry
86b2c8466d Revamp the devstat priority system. All disks now have the same priority.
The same goes for CD drivers and tape drivers.  In systems with mixed IDE
and SCSI, devices in the same priority class will be sorted in attach
order.

Also, the 'CCD' priority is now the 'ARRAY' priority, and a number of
drivers have been modified to use that priority.

This includes the necessary changes to all drivers, except the ATA drivers.
Soren will modify those separately.

This does not include and does not require any change in the devstat
version number, since no known userland applications use the priority
enumerations.

Reviewed by:	msmith, sos, phk, jlemon, mjacob, bde
1999-12-08 04:45:23 +00:00
Kenneth D. Merry
aa11587317 Recognize the Pioneer CD-ROM DRM-6324X as a changer.
PR:		kern/15198
Submitted by:	Don Lewis <truckman@FreeBSD.org>
1999-12-07 04:14:56 +00:00
Matt Jacob
6af65c6902 Add back in a prefatory TUR when the tape is *not* mounted. This seems
to help with some older tape drives.
1999-12-04 01:13:59 +00:00
Matt Jacob
160f42cca4 Correct some botched timeout defines. Allocate only 8KB for the test read
in samount. Make things a lot quieter in samount (and other places). Fix
ridiculous and not so ridiculous bugs in compression related code in both
sagetparams and sasetparams.
1999-12-03 23:14:11 +00:00
Matt Jacob
ddc83e8523 Don't clear the SA_FLAG_TAPE_LOCKED prior to calling
saprevent when we're doing an OFFLINE ioctl- saprevent
won't unlock the door, which then causes the unload to
fail on some units.

If we've already unloaded the tape, don't try and rewind and
unload in saclose. This is a slightly riskier change because
we're now going to depend on SA_FLAG_TAPE_MOUNTED to say whether
we've really unloaded the tape. This involved changing the
setting in sadone for tape errors to SA_FLAG_TAPE_FROZEN (which
is more accurate anyway-if you get an EIO you've probably lost
tape position anyway) where it used to just clear the mounted
flag.
1999-11-21 20:23:58 +00:00
Matt Jacob
2728bfbd9e Add make_dev functions. Tested with only one changer (sigh- all my others
are broken).
Submitted by:	ken@freebsd.org
1999-11-21 19:17:47 +00:00
Matt Jacob
44198f294c Fix a couple of boo-boos in the last delta. 1999-11-17 17:11:21 +00:00
Matt Jacob
387c08f0e8 Fix for 11815 (at mount time do a throwaway read of the front of the
tape to force the drive to do a media access so it knows what media
may be inserted).

Also Ken's make_dev patches- relatively untested.
1999-11-17 06:05:09 +00:00
Kenneth D. Merry
273a1a3da7 Get rid of some trailing commas in enumerated types that cause gcc to
complain when some warnings are turned on.

Requested by:	Bertrand Petit <elrond@phoe.frmug.org>
1999-11-17 05:06:52 +00:00
Kenneth D. Merry
73d2691976 Convert the xpt, pass, pt and target drivers to use the new
make_dev()/destroy_dev() interface.
1999-11-17 04:59:09 +00:00
Kenneth D. Merry
10e1cf639d Fix Bus Device Resets from userland, and specifically from camcontrol.
camcontrol was setup to use the old scheme of going through the xpt(4)
device, which never worked properly (and has been disabled for a while).

camcontrol now sends BDRs through the pass(4) device, and XPT_RESET_DEV
CCBs are put on the device queue in the transport layer, as they should be.

Submitted by:	luoqi
Reviewed by:	ken
1999-10-31 02:39:44 +00:00
Poul-Henning Kamp
02c58685a4 Change useracc() and kernacc() to use VM_PROT_{READ|WRITE|EXECUTE} for the
"rw" argument, rather than hijacking B_{READ|WRITE}.

Fix two bugs (physio & cam) resulting by the confusion caused by this.

Submitted by:   Tor.Egge@fast.no
Reviewed by:    alc, ken (partly)
1999-10-30 06:32:05 +00:00
Poul-Henning Kamp
923502ff91 useracc() the prequel:
Merge the contents (less some trivial bordering the silly comments)
of <vm/vm_prot.h> and <vm/vm_inherit.h> into <vm/vm.h>.  This puts
the #defines for the vm_inherit_t and vm_prot_t types next to their
typedefs.

This paves the road for the commit to follow shortly: change
useracc() to use VM_PROT_{READ|WRITE} rather than B_{READ|WRITE}
as argument.
1999-10-29 18:09:36 +00:00
Matt Jacob
66a9bb81f6 Mark path for deallocation only *after* you've successfully allocated it. 1999-10-27 21:49:36 +00:00
Matt Jacob
af51b059b5 Put an upper bound on the number of BUSY status retries we'll do (use the
retry count for the ccb). This is probably not quite the right thing, but it
is better than silently hanging on (possibly broken) h/w which is what we
do now.

Reviewed by:Justin/Ken: they weren't entirely happy about it but didn't say no.
1999-10-16 23:53:09 +00:00
Matt Jacob
0642b69a16 Protect xpt_run_dev_sendq in xpt_release_devq_device with splsoftcam. This
seems to handle the case of timeouts firing during probe but after a device
has gone away. It really does help.
Obtained from:gibbs@freebsd.org
1999-10-16 23:31:34 +00:00
Nick Hibma
3e2c6ca3b9 Removal of sys/device.h
- Move intrhook stuff into kernel.h
- Remove all occurrences of #device <device.h>
- Add kernel.h were necessary (nowhere)
- delete device.h

This file contained the structures for cfdata (old style config) and is no
longer used. It was included by most drivers.

It confuses the remote debugger as the definition of 'struct device' in
device.h is found before the one in bus_private.h.
1999-10-05 21:19:41 +00:00
Matt Jacob
f219e08f02 Another 1FM@EOD quirk (from mike@sentex.net for a Seagate STT20000),
and add a config option that allows one to default to 1FM@EOD for tapes
otherwise unquirked or unknown as to which to prefer. Note that tcopy
will be broken for these tapes until tcopy is fixed.
1999-10-02 20:17:16 +00:00
Poul-Henning Kamp
779b1b3d5b Introduce the disk mini-layer and devstat_end_transaction_buf() in cam/scsi.
Somewhat reviewed by:   ken
1999-10-01 09:34:10 +00:00
Matt Jacob
a8dafb4d99 Ooops- forgot to commit this.
PR:		14009
Submitted by:	jreynold@primenet.com
1999-09-28 05:14:52 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Poul-Henning Kamp
c4da3dcc64 Remove unneeded disk-related includes. 1999-09-12 08:23:21 +00:00
Poul-Henning Kamp
a35de5c8a7 Don't register a block major for tapes.
Reviewed by:	mjacob
1999-09-08 17:01:41 +00:00
Poul-Henning Kamp
10af1a2b5f We don't need to pass the diskname argument all over the diskslice/label
code, we can find the name from any convenient dev_t
1999-08-28 14:33:44 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Bruce Evans
1195ae1843 Cast pointers to uintptr_t instead of casting them to u_long. Don't
depend on gcc's feature of casting lvalues.  Cosmetic.
1999-08-24 00:04:45 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Bruce Evans
d918320517 Use devtoname() to print dev_t's instead of casting them to long or u_long
for misprinting in %lx format.
1999-08-23 20:35:21 +00:00
Mike Smith
fcb893a801 Implement a new generic mechanism for attaching handler functions to
events, in order to pave the way for removing a number of the ad-hoc
implementations currently in use.

Retire the at_shutdown family of functions and replace them with
new event handler lists.

Rework kern_shutdown.c to take greater advantage of the use of event
handlers.

Reviewed by:	green
1999-08-21 06:24:40 +00:00
Kenneth D. Merry
3ece1bd296 Fix short timeout problems with the pt(4) driver:
- increase the default timeout from 10 seconds to 60 seconds
- add a new kernel option, SCSI_PT_DEFAULT_TIMEOUT, that lets users specify
  the default timeout for the pt driver to use
- add two new ioctls, one to get the timeout for a given pt device, the
  other to set the timeout for a given pt device.  The idea is that
  userland applications using the device can set the timeout to suit their
  purposes.  The ioctls are defined in a new header file, sys/ptio.h

PR:		10266
Reviewed by:	gibbs, joerg
1999-08-20 03:48:11 +00:00
Bill Fumerola
b8e49f681b Welcome devtoname(), to most likely be used when printing information
about a dev_t.

printf("%x", dev) now becomes printf("%s", devtoname(dev)) because
printing actual information about the device is much more useful then
printing a pointer to an address that would never help the developer debug.

Submitted by:	phk, bde
1999-08-17 20:25:50 +00:00
Justin T. Gibbs
e414ac576f Bump CAM version number. 1999-08-16 23:18:24 +00:00
Justin T. Gibbs
0e5f60747c Checkpoint work on handling error conditions.
Handle errors reported through immediate notify ccbs.  This includes
bus resets, BDR messages, and abort messages.

Properly setup CA conditions for errors such as uncorectable parity
in data phases, reselection failure, and IDE message received.

Add a mechanism for stalling the queue of transactions to a particular
initiator while a CA is in progress.  Since we don't yet support
tagged I/O, this is largely just for show right now.

Properly bzero our softc at init time (oops).

Add more documentation on what all of the queues in our softc do.
1999-08-16 22:39:25 +00:00
Justin T. Gibbs
e5f5a0d8b1 xpt_release_devq now takes a count. 1999-08-16 22:23:01 +00:00
Justin T. Gibbs
2cefde5ff3 Implement the guts of the XPT_ABORT function code.
Clear residuals for XPT_TARGET_IO/XPT_CONT_TARGET_IO calls just
as we do for XPT_SCSI_IO calls.

Make xpt_release_devq a proper reciprocal of xpt_freeze_devq by
allowing the caller to decrement the count more than once per call.

Change the semantics of xpt_path_cmp to return 1 for a match
with a wildcard from path1 and 2 for a match with wildcards
from path2.  This change doesn't affect most callers as they
only check for >=0 (exact match or one containing a wildcard).

When cleaning up a device node, ensure that there are no timeouts
outstanding that reference it.
1999-08-16 22:22:41 +00:00
Justin T. Gibbs
b8b98bc375 Add another flag for debugging just peripheral drivers. The whole debugging
mechanism should be completely  revamped, but this will serve for the time
being.

Take advantage of some new behavior in xpt_path_comp which allows the
caller to determine which path, if any, had wildcards in it that allowed
for a match to succeed.  We can now use this to filter out wildcard
nodes in the EDT.

Make the amount of time we pause after writing a debug message
configurable.
1999-08-16 22:18:14 +00:00
Justin T. Gibbs
bf8bb7acc0 Add another command characteristic flag for commands that are queued
on physical devices as oposed to just in the XPT.  This is used to
mark XPT_SCSI_IO, XPT_RESET_DEV, XPT_ENG_EXEC, XPT_TARGET_IO, and
XPT_CONT_TARGET_IO function codes.

Change tag_id and init_id to be u_int from u_int8_t.  Some topologies
supported by CAM support much larger ID and tag ID address spaces
than parallel SCSI.

Kill some unused fields in the IMMED_NOTIFY ccb type.
1999-08-16 22:14:47 +00:00
Matt Jacob
48f6456d82 Put in a limit (8) for lun width- do not exceed probing this unless a device
is quirked for allowing it. This will allow SCSI cards to specify their true
correct lun width (32 for Qlogic SCSI, 16 or 65536 for Qlogic Fibre Channel)
without crippling the system because of f/w breakage of a lot of drives.
Reviewed by:	gibbs@freebsd.org
1999-08-16 17:47:39 +00:00
Justin T. Gibbs
f22adc7f6d Fix a long standing bug in the camq teardown code. 1999-08-16 02:23:42 +00:00
Matt Jacob
6ba823115e Move initialization of announce_buf up to make
sure it is initialized in all cases.
1999-08-15 23:34:40 +00:00
Poul-Henning Kamp
49ff4debd3 Spring cleaning around strategy and disklabels/slices:
Introduce BUF_STRATEGY(struct buf *, int flag) macro, and use it throughout.
please see comment in sys/conf.h about the flag argument.

Remove strategy argument from all the diskslice/label/bad144
implementations, it should be found from the dev_t.

Remove bogus and unused strategy1 routines.

Remove open/close arguments from dssize().  Pick them up from dev_t.

Remove unused and unfinished setgeom support from diskslice/label/bad144 code.
1999-08-14 11:40:51 +00:00
Poul-Henning Kamp
ce9edcf5b5 Merge the cons.c and cons.h to the best of my ability. alpha may or
may not compile, I can't test it.
1999-08-09 10:35:05 +00:00
John-Mark Gurney
5acba6ec2a disable tag queing for the MICROP 4421-07 drive. It's an old 2gig drive.
convert MICROP to a static string
1999-07-11 06:10:47 +00:00
Matt Jacob
be74589b43 Fix my complete botch. I hope. Tested this time 1999-07-07 18:14:01 +00:00
Matt Jacob
473ac4479f suggestions from bde to clean up last checkin slighty 1999-07-06 01:40:03 +00:00
Matt Jacob
a7454a8878 Make the change similar to that suggested by Nick Hibma to avoid divide by
zero traps. I actually can't believe that this compiler is *sooooo* stupid
that it did a divide when there was 1024L*1024L instead of a right shift by
20. When we get quad type modifiers in kernel printf we can change to this
too (to avoid overflow on > terabyte disk sizes).
1999-07-03 21:14:45 +00:00
Peter Wemm
c9e7f49d11 A minor tweak to shut up gcc (on the Alpha) for two (false) warnings.
How it can think that something that is initialized at declaration can
be used while uninitialized is beyond me.
1999-07-03 16:29:32 +00:00
Peter Wemm
6d7b539a6e int/long printf format problems on the Alpha. 1999-07-01 19:56:50 +00:00
Kirk McKusick
67812eacd7 Convert buffer locking from using the B_BUSY and B_WANTED flags to using
lockmgr locks. This commit should be functionally equivalent to the old
semantics. That is, all buffer locking is done with LK_EXCLUSIVE
requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will
be done in future commits.
1999-06-26 02:47:16 +00:00
Matt Jacob
f0bbbb88da Quirk Tandberg 4100 like Tandberg 4200.
PR:		11675
Reviewed by:	msmith@FreeBSD.ORG
Submitted by:	blank@uni-trier.de
1999-06-24 15:21:10 +00:00
Matt Jacob
4b4c702b0b Quirk NOLUNS cabletron device.
PR:		11677
Submitted by:	"Matthew N. Dodd" <winter@jurai.net>
1999-06-20 18:19:44 +00:00
Poul-Henning Kamp
2447bec829 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Matt Jacob
b9c8458b9d Add TDC 3800 to quirk list for fixed mode device.
PR:11866
Submitted by:	Helge Oldach hmo@sep.hamburg.com
1999-05-25 23:10:54 +00:00
Justin T. Gibbs
9911ecf957 Run xpt_action at splsoftcam() so that it cannot be re-entered by our SWI.
The XPT doesn't have a problem with this itself, but some controllers
drivers may have been caught off guard by the old behavior.

XPT_CONT_TARGET_IO is also a valid ccb type for cam_periph_unmapmem.
1999-05-25 20:17:29 +00:00
Kenneth D. Merry
edd24ab742 Fix the read/write permission checks in cam_periph_mapmem(). If we're
writing, we want to be able to read the buffer.  If we're reading, we want
to be able to write to the buffer.

PR:		kern/11870
Submitted by:	Andrew Mobbs <amobbs@allstor-sw.co.uk>
1999-05-25 17:10:04 +00:00
Justin T. Gibbs
8281556234 Rely on the statistics in XPT_GDEV_STATS instead of the versions still
retained in XPT_GDEV_TYPE for binary compatibility.  Mark the legacy
structure values for removal when we bump the major CAM revision.
1999-05-23 18:57:29 +00:00
Justin T. Gibbs
516871c613 Add a default async handler funstion to cam_periph.c to remove duplicated
code in all initiator type peripheral drivers.

scsi_target.c:
	Release ATIO structures that wind up in the 'unkown command queue'
	for consumption by our userland counterpart, back to the controller
	when the exception for that command is cleared.
1999-05-22 22:00:24 +00:00
Justin T. Gibbs
87cfaf0e1f Add the XPT_PATH_STATS and XPT_GDEV_STATS function codes. These ccb
types allow the reporting of error counts and other statistics.  Currently
we provide information on the last BDR or bus reset as well as active
transaction inforamtion, but this will be expanded as more information is
added to aid in error recovery.

Use the 'last reset' information to better handle bus settle delays.
Peripheral drivers now control whether a bus settle delay occurs and
for how long.  This allows target mode peripheral drivers to avoid
having their device queue frozen by the XPT for what shoudl only be
initiator type behavior.

Don't perform a bus reset if the target device is incapable of performing
transfer negotiation (e.g. Fiber Channel).

If we don't perform a bus reset but the controller is capable of transfer
negotiations, force negotiations on the first transaction to go to the
device.  This ensures that we aren't tripped up by a left over negotiation
from the prom, BIOS, loader, etc.

Add a default async handler funstion to cam_periph.c to remove duplicated
code in all initiator type peripheral drivers.

Allow mapping of XPT_CONT_TARGET_IO ccbs from userland.  They are
itentical to XPT_SCSI_IO ccbs as far as data mapping is concerned.
1999-05-22 21:58:47 +00:00
Justin T. Gibbs
804540113f Make xpt_path_comp work on wildcarded paths again. 1999-05-18 00:41:05 +00:00
Matt Jacob
040816ec58 Quirk this drive- all luns show up the same.
Submitted by:	Stephen McKay <syssgm@detir.qld.gov.au>
1999-05-11 15:44:39 +00:00
Matt Jacob
bd1b9cb70f Add a SA_FLAG_COMP_SUPP flag (to quirk compression as
SUPPORTED). Add a SA_FLAG_TAPE_FROZEN for (see below).
Add a queue_count field to softc.

Add HP T20* Travan-5 like tape device as a FIXED/512 type device.
Works for me. Add TANDBERG SLR5 as a variable SA_QUIRK_1FM device.
Change VIPER 2525 to 1024 byte blocksize. It's possible other
drives should change too, but see below..

Change argument to sagetparams to be pointer to a sa_comp_t union-
this can be either a DATA COMPRESSION or a DEVICE CONFIGURATION
page. In general compression now tries to use the DATA COMPRESSION
page and if that fails tries the DEVICE CONFIGURATION page.

Change close routine to not rewind tape if there's a failure in either
writing filemarks or in backing over one of two filemarks for a 2FM
at EOT tape- instead mark the tape as 'frozen' and print a message
saying that either an OFFLINE or REWIND or an MTEOM command is needed
to clear this state (all bring certainty back to tape position). Fix
sastrategy to not allow I/O to a frozen tape.

Add MTIOCGETEOTMODEL/MTIOCSETEOTMODEL ioctls that get and set the EOT
model for a tape drive (you can now dynamically change whether it's
a 2 FM @ EOT or 1FM at EOT tape device). This ought to give folks
something to handle the QIC drives we don't know about. Correctly propagate
record of compression algorithm back. Clear FROZEN flag for EOM, REWIND
and OFFLINE (and RETENSION and ERASE) cases.

Fix an egregious bug in sadone that had left the device queue frozen
for deferred (for fixed mode case) errors.

Add comment in samount about how useless the test unit ready is for
invalidating a mount (this has to be fixed later).

Fix residual calculation (per Eivind) in saerror so that negative values
for tape records being too large for the supplied buffer get caught. Do
some other saerrro cleanup.

Per Ken && Justin, add my name to copyright comment.
1999-05-11 04:01:35 +00:00
Matt Jacob
2c3cca96df Quirk NOLUNS CALIPER CP150. 1999-05-11 02:41:00 +00:00
Matt Jacob
00bb66d73c Make clear that the DATA COMPRESSION page is a SCSI-3 entity- not a SCSI-2
entity. Add the Device Configuration page data structure- this structure
should be used if you fail to fetch the DATA COMPRESSION page. Make a union
type of a mode header, a device configuration page and the data compression
page.

Add a couple of QIC density defines (QIC 2G/QIC 4GB).
1999-05-11 02:23:37 +00:00
Kenneth D. Merry
50711c71c9 Add a facility in the CAM error handling code to retry selection timeouts.
If the client requests that the error recovery code retry a selection
timeout, it will be retried after half a second.  The delay is to give the
device time to recover.

For most of these drivers, I only added selection timeout retries where
they were also retrying unit attention type errors.  The sa(4) driver calls
saerror() in a number of places, but most of them don't request retrying
unit attentions.

Also, bump the default minimum CD changer timeout from 2 to 5 seconds and
the maximum timeout from 10 to 15 seconds.  Some Pioneer changers seem to
have trouble with the shorter timeout.

Reviewed by:	gibbs
1999-05-09 01:25:34 +00:00
Poul-Henning Kamp
c48d17750f Introduce two functions: physread() and physwrite() and use these directly
in *devsw[] rather than the 46 local copies of the same functions.

(grog will do the same for vinum when he has time)
1999-05-07 07:03:47 +00:00
Kenneth D. Merry
9deea8574e Add a number of interrelated CAM feature enhancements and bug fixes.
NOTE:  These changes will require recompilation of any userland
applications, like cdrecord, xmcd, etc., that use the CAM passthrough
interface.  A make world is recommended.

camcontrol.[c8]:
 - We now support two new commands, "tags" and "negotiate".

	- The tags commands allows users to view the number of tagged
	  openings for a device as well as a number of other related
	  parameters, and it allows users to set tagged openings for
	  a device.

	- The negotiate command allows users to enable and disable
	  disconnection and tagged queueing, set sync rates, offsets
	  and bus width.  Note that not all of those features are
	  available for all controllers.  Only the adv, ahc, and ncr
	  drivers fully support all of the features at this point.
	  Some cards do not allow the setting of sync rates, offsets and
	  the like, and some of the drivers don't have any facilities to
	  do so.  Some drivers, like the adw driver, only support enabling
	  or disabling sync negotiation, but do not support setting sync
	  rates.

 - new description in the camcontrol man page of how to format a disk
 - cleanup of the camcontrol inquiry command
 - add support in the 'devlist' command for skipping unconfigured devices if
   -v was not specified on the command line.
 - make use of the new base_transfer_speed in the path inquiry CCB.
 - fix CCB bzero cases

cam_xpt.c, cam_sim.[ch], cam_ccb.h:

 - new flags on many CCB function codes to designate whether they're
   non-immediate, use a user-supplied CCB, and can only be passed from
   userland programs via the xpt device.  Use these flags in the transport
   layer and pass driver to categorize CCBs.

 - new flag in the transport layer device matching code for device nodes
   that indicates whether a device is unconfigured

 - bump the CAM version from 0x10 to 0x11

 - Change the CAM ioctls to use the version as their group code, so we can
   force users to recompile code even when the CCB size doesn't change.

 - add + fill in a new value in the path inquiry CCB, base_transfer_speed.
   Remove a corresponding field from the cam_sim structure, and add code to
   every SIM to set this field to the proper value.

 - Fix the set transfer settings code in the transport layer.

scsi_cd.c:

 - make some variables volatile instead of just casting them in various
   places
 - fix a race condition in the changer code
 - attach unless we get a "logical unit not supported" error.  This should
   fix all of the cases where people have devices that return weird errors
   when they don't have media in the drive.

scsi_da.c:

 - attach unless we get a "logical unit not supported" error

scsi_pass.c:

 - for immediate CCBs, just malloc a CCB to send the user request in.  This
   gets rid of the 'held' count problem in camcontrol tags.

scsi_pass.h:

 - change the CAM ioctls to use the CAM version as their group code.

adv driver:

 - Allow changing the sync rate and offset separately.

adw driver

 - Allow changing the sync rate and offset separately.

aha driver:

 - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

ahc driver:

 - Allow setting offset and sync rate separately

bt driver:

 - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

NCR driver:

 - Fix the ultra/ultra 2 negotiation bug
 - allow setting both the sync rate and offset separately

Other HBA drivers:
 - Put code in to set the base_transfer_speed field for
   XPT_GET_TRAN_SETTINGS CCBs.

Reviewed by:	gibbs, mjacob (isp), imp (aha)
1999-05-06 20:16:39 +00:00
Justin T. Gibbs
5f14bb14e3 Don't touch a path after we've free'd it. 1999-05-04 19:24:21 +00:00
Justin T. Gibbs
9dd03ecf30 Release bus entries in the EDT when a path is released.
Null out path entries when the path is released to catch bugs.
Free our configuration hook when we're done with it.
1999-04-23 23:25:48 +00:00
Peter Wemm
54a8c69347 Stage 1 of a cleanup of the i386 interrupt registration mechanism.
Interrupts under the new scheme are managed by the i386 nexus with the
awareness of the resource manager.  There is further room for optimizing
the interfaces still.  All the users of register_intr()/intr_create()
should be gone, with the exception of pcic and i386/isa/clock.c.
1999-04-21 07:26:30 +00:00
Justin T. Gibbs
d3a5df64ab Use macros for accessing the head of the heap so that code
is isolated from implementation details of the heap.
1999-04-19 21:26:17 +00:00
Justin T. Gibbs
5a526431f8 cam_periph.c:
Move handling of CAM_AUTOSENSE_FAIL into block dealing with
	all other scsi status errors.

cam_queue.c:
cam_queue.h:
	Fix 'off by one' heap bug in a more efficient manner.  Since
	heap algorithms like to deal with indexes started from 1,
	offset our heap array pointer at allocation time to make this
	so for a C environment.  This makes the implementation of the
	algorithm a bit more efficient.

cam_xpt.c:
	Use macros for accessing the head of the heap so that code
	is isolated from implementation details of the heap.
1999-04-19 21:26:08 +00:00
Matt Jacob
0366f90aa6 Make WangTek 51000 a fixed block device.
PR:		kern/11194
Obtained from:naddy@mips.rhein-neckar.de
1999-04-18 01:05:03 +00:00
Peter Wemm
e91896117b Well folks, this is it - The second stage of the removal for build support
for LKM's..
1999-04-17 08:36:07 +00:00
Justin T. Gibbs
cbcf29f8ea Remove camq_regen(). We already perform modular comparisons
for generation counts, so no further steps to deal with generation
count wrap are required.
1999-04-07 22:57:54 +00:00
Justin T. Gibbs
8bad620d54 Remove camq_regen(). We already perform modular comparisons
for generation counts, so no further steps to deal with generation
count wrap are required.

Fix an off by one problem in the camq heap code.
1999-04-07 22:57:48 +00:00
Peter Wemm
0cbbb7bffd Use PHOLD/PRELE rather than P_PHYSIO. 1999-04-06 03:05:36 +00:00
Kenneth D. Merry
ca3b51e9ed Disable tagged queueing for the IBM DCAS drives. These drives have poor
write performance when tagged queueing is enabled.

Although the PR was submitted for the 4 gig version of this drive, the
assumption is that the 2 gig version has the same problem.  Therefore
tagged queueing is disabled for both.

Also, update the comment for the Western Digital Enterprise drives to note
that the best performance for those drives is achieved when tagged queueing
is disabled and write caching is enabled.

PR:		kern/10398
Submitted by:	Hideaki Okada <hokada@isl.melco.co.jp>
1999-03-14 05:15:38 +00:00
Jordan K. Hubbard
79ccc19983 People who wanted the "tagged opening" message can boot -v. The rest
of us, who appear to have complained incessantly about this message since
it appeared, can now stop.
1999-03-11 10:48:02 +00:00
Kenneth D. Merry
c816e0254c The 4 gig version of the Seagate Medalist Pro seems to have the same
trouble with tagged queueing as the 6.5 gig version.

So, I've added a quirk entry for it to limit it to two outstanding
transactions at a time, just like the 6.5G version.  While I'm at it, add a
quirk for the 9G version of the drive, since it most likely has the same
problem.

Submitted by:	Jeremy Lea <reg@shale.csir.co.za>
1999-03-07 22:48:50 +00:00
Justin T. Gibbs
3a59d8c190 Implement the control device for the "targ" target mode processor target
emulator so that instances can be dynamically added and removed from the
system.

Properly reference count peripheral instances so they are cleaned up when
destroyed by the control device.

Set a timeout for test unit ready commands.  Before it was uninitialized
and could cause us to drop off the bus when no real timeout had occurred.
1999-03-05 23:25:11 +00:00
Justin T. Gibbs
e7783a9f45 Silence errors.
Reduce the number of accept target I/O entries we allow to better
exercise the resource shortage handling code in controller drivers.
1999-03-05 23:21:28 +00:00
Justin T. Gibbs
6f79c2d329 Silence complaints about synchronize cache requests that fail with illegal
request.
1999-03-05 23:20:20 +00:00
Justin T. Gibbs
d1dc9ab13a xpt_done has no reason to take a volatile ccb *. 1999-03-05 23:18:56 +00:00
Justin T. Gibbs
a5479bc57a Protect access to the EDT with splcam() to protect against corruption
caused by temporary EDT allocations performed by controller drivers in
their interrupt routiens.

Reference count bus entries in the EDT in preparation for support for
dynamic controller arrival and departure.

Have children of the EDT hold references to their parents.

Correct routing of the XPT_IMMED_NOTIFY ccb type for use in
target mode applications.

Fix a few cases where the generation count for EDT data members was
not being updated when a modification occurred.

splcam() problem Noticed by: Tor Egge <tegge@FreeBSD.org>
1999-03-05 23:18:16 +00:00
Justin T. Gibbs
a89bb8b406 Add constants and macros for dealing with XPT opcode group types. 1999-03-05 23:13:20 +00:00
Matt Jacob
b9a3993d60 +Match against T4000* for HP QIC quirks (not T4000S* where it doesn't then
catch a T4000s)
+ Set *some* kind of error at EOM if we're in fixed mode and have pending errs.
  Do not clear the ERR_PENDING bit if more buffers are queued.
+ Release the start_ccb in this case also, else we hang forever on rewinding.
+ Any kind of error for load to BOT in samount should then cause an attempt
  to use REWIND to come back to BOT. Do the initial load command quietly.
+ In samount, if we succeed, set the relative position markers.
1999-03-01 01:07:47 +00:00
Kenneth D. Merry
560d629f72 Add a quirk entry for the Seagate Medalist Pro 6 gig drive. It seems this
drive has very poor write performance (1.4MB/sec vs. 12MB/sec) with anything
more than two oustanding transactions.

So, this limits the number of tagged commands to two for that drive.
Thanks to Paul van der Zwan for doing a whole lot of testing to confirm
this.

Reported by:	Paul van der Zwan <paulz@trantor.xs4all.nl>
1999-02-26 18:38:06 +00:00
Kenneth D. Merry
588b47e5d2 Fix sync rate and transfer rate printouts in xpt_announce_periph().
Sync rates like 4.032MHz were getting printed as 4.32MHz.

Also, add a quirk entry for the 18G Quantum Atlas III.  Like most other
recent Quantum drives, it bogusly reports queue full.  Thanks to Andre
Albsmeier <andre.albsmeier@mchp.siemens.de> for the Atlas III inquiry
information.

Reviewed by:	gibbs
1999-02-18 18:08:39 +00:00
Justin T. Gibbs
11eaafb1f1 Completely set information in the transaction description before performing
a selwakeup for it.  Cosmetic.
1999-02-11 07:08:58 +00:00
Kenneth D. Merry
2a888f938e Add a prioritization field to the devstat_add_entry() call so that
peripheral drivers can determine where in the devstat(9) list they are
inserted.

This requires recompilation of libdevstat, systat, vmstat, rpc.rstatd, and
any ports that depend on the devstat code, since the size of the devstat
structure has changed.  The devstat version number has been incremented as
well to reflect the change.

This sorts devices in the devstat list in "more interesting" to "less
interesting" order.  So, for instance, da devices are now more important
than floppy drives, and so will appear before floppy drives in the default
output from systat, iostat, vmstat, etc.

The order of devices is, for now, kept in a central table in devicestat.h.
If individual drivers were able to make a meaningful decision on what
priority they should be at attach time, we could consider splitting the
priority information out into the various drivers.  For now, though, they
have no way of knowing that, so it's easier to put them in an easy to find
table.

Also, move the checkversion() call in vmstat(8) to a more logical place.

Thanks to Bruce and David O'Brien for suggestions, for reviewing this, and
for putting up with the long time it has taken me to commit it.  Bruce did
object somewhat to the central priority table (he would rather the
priorities be distributed in each driver), so his objection is duly noted
here.

Reviewed by:	bde, obrien
1999-02-10 00:04:13 +00:00
Matt Jacob
8410876eb9 quiet the alpha compiler 1999-02-05 08:49:34 +00:00
Matt Jacob
499d2a2a5c Extend unit numbers to a full 10 bits (split into sections
of the minor). Establish and use a control mode open. Control
mode opens may open the device without locking, but are prohibited
from all but some ioctls. MTIOCGET always works. MTIOCERRSTAT
works, but the clearing of latched error status is contingent
upon whether another application has the device open, in which
case an interruptible perip acquire is done. MTSETBSIZ, MTSETDNSTY
and MTCOMP also require a periph aquire.

Relative fileno and blkno are tracked. Note that just about any
error will make these undefined, and if you space to EOD or use
hardware block positioning, these are also lost until the next
UNLOAD or REWIND.

Driver state is also tracked and recorded in the unit softc
to be passed back in mt_dsreg for a MTIOCGET call.
Thanks to Dan Strick for suggesting this.

Reintroduce 2 filemarks at EOD for all but QIC devices. I
really think it's wrong, but there is a lot of 3rd party
software that depends upon this (not the least of which is
tcopy). Introduce a SA_QUIRK_1FM to ensure that some devices
can be marked as only being able to do 1 FM at EOD.

At samount time force a load to BOT if we aren't mounted. If the
LOAD command fails, use the REWIND command (e.g., for the IBM 3590
which for some gawdawful reason doesn't support the LOAD (to BOT)
command).

Also at samount time, if you don't know fixed or variable, try to
*set* to one of the known fixed (or variable, for special case)
density codes. We only have to do this once per boot, so it's not
that painful. This is another way to try and figure out the wierd
QIC devices without having to quirk everything in the universe.

A substantial amount of cleanup as to what operations can and what
operations cannot be retried. Don't retry space operations if they
fail- it'll just lead to lossage.

Not yet done is invalidating mounts correctly after errors. ENOTIME.
1999-02-05 07:32:52 +00:00
Matt Jacob
d032c79f31 add QIC 525,320,1320,3080 codes 1999-02-05 07:19:23 +00:00
Matthew Dillon
b4e36adf1c Fix warnings preparing for -Wall -Wcast-qual
Also disable one usb module in LINT due to fatal compilation errors,
    temporary.
1999-01-27 20:09:21 +00:00
Matthew Dillon
1c7c3c6a86 This is a rather large commit that encompasses the new swapper,
changes to the VM system to support the new swapper, VM bug
    fixes, several VM optimizations, and some additional revamping of the
    VM code.  The specific bug fixes will be documented with additional
    forced commits.  This commit is somewhat rough in regards to code
    cleanup issues.

Reviewed by:	"John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
Matt Jacob
667d00a796 put it back the way it was 1999-01-20 23:00:31 +00:00
Matt Jacob
7781f5a621 temporary fix so alpha stays working while configure code is fixed 1999-01-20 19:08:45 +00:00
Kenneth D. Merry
6dd76100e4 By popular demand, back out the CONNER CFP* quirk entry, and return it to
its original form.  (Originally, it only applied to the CFP 2107.)

Hopefully we can come to some conclusion about which Conner drives are
broken for tagged queueing.
1999-01-20 01:13:20 +00:00
Kenneth D. Merry
1f04f5abd7 The Samsung WN34324U is broken for tagged queueing.
PR:		kern/9535
Submitted by:	NAKAJI Hiroyuki <nakaji@zeisei.dpri.kyoto-u.ac.jp>
1999-01-19 16:59:36 +00:00
Kenneth D. Merry
59190eaa10 Generalize the quirk entry for the Conner CFP* drives. It did just cover
the CFP2107, but it appears (not surprisingly) that the 1 gig and 4 gig
versions of that drive have the same problem with tagged queueing.

Also, fix the problem reported in PR kern/9482.  The XPT_DEV_MATCH case in
xptioctl() wasn't putting a proper path in the CCB before it called
xpt_action().  When CAMDEBUG is defined, and CAM_DEBUG_TRACE debugging is
turned on, the CAM_DEBUG statement at the beginning of xpt_action would end
up deferencing a NULL path pointer.  That of course caused a panic.

My solution is to just stick the xpt peripheral's path in the CCB.

PR:		kern/9482
Reviewed by:	gibbs
1999-01-19 01:02:47 +00:00
Peter Wemm
6d2a8f1ca0 Call the xpt_init() hook during at the start of the configure() process
via SYSINIT().  This gets a little closer to making cam useable as a
module.
1999-01-19 00:13:05 +00:00
Matt Jacob
15da947cba Sascha Blank <blank@uni-trier.de> convinced me I was an
idiot about testing SA_QUIRK_2FM in samount. Fixed.

Removed the NORRLS quirk (to save quirk space) and left
the behaviour of being quiet about failed reserve/release
(failed due Illegal Request) the same.

Added a SF_QUIET_IR for prevent/allow for the same purposes.
1999-01-16 19:20:30 +00:00
Matt Jacob
54e609ba5c More bandaids. One important one from Sascha Blank
(<blank@fox.uni-trier.de>) about quirks being set as
arithmetic values, not as bitfields. Add HP, Kennedy
and M4 1/2" reel quirk entries.

Do a lot of gratuitous source changing.

Audit all functions that build ccbs for the tape driver
and decide whether each one can be retried or not.

Still to do is some more state management post errors.
1999-01-16 04:02:31 +00:00
John Polstra
0ec81012da Replace includes of <sys/kernel.h> with includes of
<sys/linker_set.h> in those files that use only the linker set
definitions.
1999-01-14 06:22:10 +00:00
Justin T. Gibbs
c8bead2a12 Add support for wildcard device entries in the EDT. The target mode
'Black Hole' device uses this feature to schedule itself against any
target or lun attached to a controller that receives an unwanted request
from an initiator instead of having an instance per potential target/lun
request.

Use the wildcard entries to simplify wildcard async callback storage.

Don't announce devices twice to peripheral drivers.  The devices will
be announced as soon as the AC_PATH_REGISTERED event is registered by
the peripheral driver, so no manaul push of this event is required.

Reviewed by: Kenneth Merry <ken@FreeBSD.org>
1999-01-14 06:03:59 +00:00
Justin T. Gibbs
6fda903f5b The target mode 'Black Hole' device. This peripheral driver provides inquiry
data and sense information for target mode devices for which no other
peripheral driver is attached.  This simplifies the task of dealing with
luns that are not otherwise enabled for target mode if the controller
does not have firmware that automatically deals with this case (e.g.
the aic7xxx driver).
1999-01-14 06:00:29 +00:00
Justin T. Gibbs
443af83864 Properly handle transfers that only consume partial buffers. 1999-01-14 05:57:32 +00:00
Eivind Eklund
fcfc314003 Make dsopen() and dsioctl() use cdstrategy1 instead of cdstrategy.
This silence the warnings and makes it more obvious where the bugs
have to be fixed.
1999-01-12 16:26:19 +00:00
Matt Jacob
26fd36dffa Clean up and fix quirk table (was missing necessary wildcards) and add a couple
from the old driver. Change format of quirk table to have a preferred block
size for devices that need to be QUIRK_FIXED- this is loaded into the
last_media_blocksize tag at saregister time and will be used in the first
samount case.

Change sasetparams to take a sense_flags argument so that probe time testing
can be quieter (e.g. with SF_NO_PRINT).

Fix a couple of silly bugs in the fixed/variable determination in samount- one
was where there was a check against 'guessing' AND the density code being
default density- *SMACK* - you're only guessing if you find the media code
to be *other* than default density. Second bug was a test against current
blocksize being zero- should be a test against whether current blocksize
is not equal to the last blocksize if you had wanted to be fixed (suppose
you came up in fixed, but not the preferred size?). And if you don't
know what the fixed size should be, select 512 as the starting point,
not BLKDEV_IOSIZE (reality wins). Finally, in doing the test set to variable
mode, make sasetparams non-chatty.
1999-01-12 08:15:47 +00:00
Matt Jacob
7439f1066e Make HP T4000S quirk to FIXED mode 1999-01-11 18:26:25 +00:00
Eivind Eklund
cd651e8119 Add 'static' to the declaration, too. 1999-01-11 17:45:22 +00:00
Matt Jacob
f55ca80bcf Like the problems just fixed in scsi_da.c, make sure
to release the probe ccb before taking down the periph.
Also, don't do cdscheduling if you're not going to
attach the device after all.
Reviewed by:	ken@freebsd.org
1999-01-07 20:20:57 +00:00
Matt Jacob
f403e6edea A better fix to avoid race conditions between failed probes
and peripheral removal.
Obtained from:gibbs@freebsd.org
1999-01-07 20:19:09 +00:00
Kenneth D. Merry
4cdd022168 The Quantum Atlas III evidently has an identical problem to the Atlas II.
It keeps returning queue full until we have reduced the number of tagged
openings to the minimum.

So, put in a quirk entry with the same work-around.  This quirk entry is
only for the 9G Atlas III, once someone comes up with inquiry information
for the 18G version of that drive, we can quirk it as well.

Submitted by:	"Johan Granlund" <johan@granlund.nu>
1999-01-07 01:11:24 +00:00
Kenneth D. Merry
bfc0eb0f5a The Conner CFP2107 is a fixed-media drive, not removable media. This fixes
the quirk that disables tagged queueing for those drives.

Also, silence a warning by disabling xpt_for_all_targets() and
xpt_for_all_periphs().  These two functions are not currently used, but
they should not be removed.  They're part of a set of functions that
provide a way to execute a function for every {bus,target,device,periph} in
the system.

If anyone needs to use either function in the future, they can be
un-#ifdefed.
1999-01-05 21:37:07 +00:00
Matt Jacob
2e56e285fd Add a quirk that disables SYNCHRONIZE CACHE
PR:		8882
Obtained from:	Hellmuth Michaelis hm@kts.org
1999-01-05 20:43:41 +00:00
Matt Jacob
918d0cf6b7 Temporary workaround (bandaid) for case where you have READ
CAPACITY fail for a non-removable media device. There's a race
condition where the device entry is removed and then
xpt_release_ccb is called which attempts to give back the ccb
to a device that's now gone. In this bandaid release the ccb
early and then remember to not call xpt_release_ccb later.
1999-01-03 22:57:54 +00:00
Matt Jacob
656d1af535 Force ARCHIVE Vipers to be FIXED 1998-12-28 19:21:12 +00:00
Matt Jacob
5d754af79f a more correct change that should meet the sniff test 1998-12-24 06:01:15 +00:00
Matt Jacob
93f8eaab7d Unstaticize swi_camnet && swi_cambio so Alpha kernels can build again. 1998-12-24 02:43:41 +00:00
Matt Jacob
a1d461b7dd you can retry SYNC CACHE on UA errors 1998-12-23 16:48:17 +00:00
Eivind Eklund
3c68dd1aec Staticize.
Reviewed by:	gibbs
1998-12-22 20:05:23 +00:00
Matt Jacob
5a4f8fa5a4 Add a quirk NORRLS (no reserve/release) which can (and
will) get set for the devices that don't actually support
reserve/release (so we don't keep trying it).

Add softc storage and manage storing last I/O and CTL
commands that had errors (for correlative purposes).

In saclose clear the 'MOUNTED' bit if we either rewind or
unload (yes, this shouldn't be necessary since the next open
should catch whether a tape change occurred, but I'm having
some questions about that actually working so this is
safer for the moment). Oh, forgot to mention in previous
commit messages that some of the failures particularly at
close time cause the tape to be ejected (for the sake
of safety)- all this prior to redoing the state machine
(which is in progress) which will try and handle this better.

Complete the addition of the setmark support
(from Martin.Birgmeier@aon.at).
1998-12-22 17:26:13 +00:00
Matt Jacob
990635d6e8 1) Fix some serious bugs (1 botch on my part which caused a filemark to be
written even it the tape was opened readonly- 2 botches in deferred error
handling for FIXED LENGTH mode which caused panic && hand resp.). Fixed
a memory leak in sa_mount.
2) Fixed an annoying bug when turning of compression to actually reflect
this for future status calls.
3) Implement the MTIOCERRSTAT call where latched control and I/O residuals
and sense data are returned to the application asking for them.
1998-12-19 23:33:21 +00:00
Matt Jacob
b5c6d4c555 Add in block position/block locate functions. 1998-12-18 04:31:43 +00:00
Matt Jacob
d902101e8e Add structures and function definitions pertinent for hardware locate support. 1998-12-18 04:29:16 +00:00
Justin T. Gibbs
2e66665367 Correct the definition of the changer device capabilities page. The
previous definition confused some reserved bytes for exchange capabilities.
1998-12-17 22:26:39 +00:00
Matt Jacob
303826838c Add some tape specific density codes- only enough of them here to recognize
some specific older units so we can choose 2FM@EOD or FIXED blocksize
quirks.
1998-12-17 19:04:18 +00:00
Matt Jacob
888bec0f0c Several changes having to do blocksize- mostly to force variable as the default.
Attempt to determine (at mount time if not done so already) via density code
whether a device should default to fixed mode or not. Attempts to set to
variable that fail will cause fixed to be selected.

Similarly, the '2 filemarks at EOM' quirk is now determined (or attempted to
be determined) via density code. Some as yet not entirely tested code for
coping with 2FM@EOD position is now also in place.
1998-12-17 18:56:23 +00:00
Justin T. Gibbs
e500cd9896 Correctly track allocated accept target I/O ccbs so that they can be
aborted prior to disabling our lun.  This requires a second set of
links since we use the ones in the ccb_hdr during normal operations.

Nuke some unused variables.
1998-12-17 00:03:14 +00:00
Kenneth D. Merry
ff1fe75fab At Justin's request, limit the size of buffers that can be mapped into
and out of kernel address space (via the pass(4) and xpt(4) peripheral
drivers) to 64K (DFLTPHYS).  Some controllers, like the Adaptec 1542,
don't support more than 64K transactions.

We plan on eventually having the capability of limiting this size based
on min(MAXPHYS, controller max), but since that capability isn't here yet,
limit things to the lowest common denominator.
1998-12-16 21:00:06 +00:00
Kenneth D. Merry
79d49a061b Probable fix for the "cdda2wav" panics that various people have been
reporting since this past summer.  (I think Daniel O'Conner was the first.)

The problem appears to have been something like this:

 - cdda2wav by default passes in a buffer that is close to the 128K MAXPHYS
   limit.
 - many times, the buffer is not page aligned
 - vmapbuf() truncates the address, so that it is page aligned
 - that causes the total size of the buffer to be greater than MAXPHYS,
   which of course is a bad thing.

Here's a quote from the PR (kern/9067):

==================
In particular, note bp->b_bufsize = 0x0001f950 and bp->b_data = 0xf2219960
(which does not start on a page boundary).  vunmapbuf() loops through all
the pages without any difficulty until addr reaches 0xf2239000, and then
the panic occurs.  This seems to indicate that we are exceeding MAXPHYS
since we actually started from the middle of a page (the data is being
transfered to a non page aligned location).

To complete the description, note that the system call originates from
ReadCddaMMC12() (in scsi_cmds.c of cdda2wav) with a request to read 55
audio sectors of 2352 bytes (which is calculated to fall under MAXPHYS).
This in turn ends up calling scsi_send() (in scsi-bsd.c) which calls
cam_fill_csio() and cam_send_ccb().  This results in a CAMIOCOMMAND ioctl
with a ccb function code of XPT_SCSI_IO.
==================

The fix is to change the size check in cam_periph_mapmem() so that it is
like the one in minphys().  In particular, it is something like:

if ((buffer_length + (buf_ptr & PAGE_MASK)) > MAXPHYS)
	buffer is too big

My fix is based on the one in the PR, but I cleaned up a fair number of
things in cam_periph_mapmem().  The checks for each buffer to be mapped
are now in a separate loop from the actual mapping operation.  With the new
arrangement, we don't have to bother with unmapping any previously mapped
buffers if one of the checks fails.

Many thanks to James Liu for tracking this down.  I'd appreciate it if some
vm-savvy folks would look this over.  I believe this fix is correct, but I
could be wrong.

PR:		kern/9067 (also, kern/8112)
Reviewed by:	gibbs
Submitted by:	"James T. Liu" <jtliu@phlebas.rockefeller.edu>
1998-12-16 18:00:39 +00:00
Justin T. Gibbs
b6f7b14445 Enable/Disable our lun on open/close. Track resources kept at the controller
level so they can be reclaimed before attempting to disable our lun.
Correctly free descriptors.  Add periph locking and spl protection
around open and close.
1998-12-15 08:15:15 +00:00
Justin T. Gibbs
bb6087e5bb Wire up the XPT_ABORT and XPT_RESET_DEV ccb function codes so they can
be delivered to controller drivers.

Adjust for changes to the ccb_hdr list types in cam_queue.h
1998-12-15 08:13:10 +00:00
Justin T. Gibbs
6fc6a73645 Add definitions for TAILQ, LIST, and SLIST ccb_hdr queues. 1998-12-15 08:12:03 +00:00
Justin T. Gibbs
10fc9d90ce Return ENODEV instead of EINVAL when a particular exchange or move
operation exceeds the capabilities of the changer device.
1998-12-12 23:52:46 +00:00
Matt Jacob
ed744c4e51 Some fixes to handle fixed mode and variable mode more sensibly- and also
incorporate some notion of which revision the device is. If it's < SCSI2, for
example, READ BLOCK LIMITS is not a MANDATORY command.

At any rate, the initial state is to try and read block limits to get a notion
of the smallest and largest record size as well as the granularity. However,
this doesn't mean that the device should actually *in* fixed block mode should
the max && min  be equal... *That* choice is (for now) determined by whether
the device comes up with a blocksize of nonzero. If so, then it's a fixed block
preferred device, otherwise not (this will change again soon).

When actually doing I/O, and you're in fixed length mode, the block count is
*not* the byte count divided by the minimum block size- it's the byte count
divided by the current blocksize (or use shift/mask shortcuts if that worked
out...).

Then when you *change* the blocksize via an ioctl, make sure this actually
propagates to the stored notion of blocksize (and update the shift/mask
shortcuts).

Misc Other:
	When doing a mode select, only use the SCSI_SAME_DENSITY (0x7f) code if
the device is >= SCSI2- otherwise just use the saved density code.

	Recover from the ripple of ILLEGAL REQUEST not being 'retried' in that
RESERVE/RELEASE is not a mandatory command for < SCSI2 (so ignore it if it
fails).
1998-12-11 07:19:36 +00:00
Justin T. Gibbs
57c2edb48f Convert dadump to use reasonable data types so that some casting is unecessary. 1998-12-11 03:54:43 +00:00
Justin T. Gibbs
a0f37f55ee Do not attempt to retry commands that fail with ILLEGAL REQUEST status. 1998-12-11 03:53:05 +00:00
Justin T. Gibbs
4227e01d4d Convert debugging printfs to the CAM_DEBUG macro.
Allow sync transfers if the controller supports it.  Wide will follow
as soon as I get the kinks worked out of wide target transfers in the
aic7xxx driver (currently the only target mode driver in the tree).
1998-12-10 04:07:42 +00:00
Justin T. Gibbs
9819265820 Expand the hba_misc fied in the Path Inquiry ccb to allow a controller driver
to specify that it does not provide initiator services (PIM_NOINITIATOR)
and that the initial bus reset for device probing should be avoided
(PIM_NOBUSRESET).

Modify the XPT layer to honor these flags.
1998-12-10 04:05:49 +00:00
Matt Jacob
aa872be6f3 use CAM_DEBUG_XPT to track XPT; correct a misspelling 1998-12-06 00:06:48 +00:00
Matt Jacob
373524d467 print the appropriate SCSI revision (with CCS as a proper name for the announce message 1998-12-06 00:05:47 +00:00
Matt Jacob
c7f682db21 Add a CAM_DEBUG_XPT define (to debug XPT layer only). Add a CAM_DEBUGGED
macro to be like the CAM_DEBUG macro but to instead provide a predicate
result.
1998-12-05 23:55:48 +00:00
Matt Jacob
c7131a684c Add in named SID field revision names (including CCS).
Add in named defines for DEFAULT and NOCHANGE densities (for sequential
access devices).
1998-12-05 22:10:14 +00:00
Archie Cobbs
2127f26023 Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by:	Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
Kenneth D. Merry
4f1d0ef261 "Fix" a problem with the Quantum Viking. It appears that this drive does
not like the 6-byte read and write commands!  It returns illegal request,
with the field pointer pointing to byte 9 of a 6 byte CDB.

In any case, the work around is to put in a quirk mechanism that makes sure
that we don't send 6-byte reads or writes to this device.  It's rather sad
that this is necessary.  You'd think that they would be able to get
something that basic to work right in their firmware...

Reviewed by:	gibbs
Reported by:	Adam McDougall <bsdx@spawnet.com>
1998-12-02 17:35:28 +00:00
Joerg Wunsch
ae1b283631 ...nor does this old TDC3620 like to be asked for compression.
But well, now it's running again!
1998-11-26 10:47:52 +00:00
Joerg Wunsch
36230d67d0 This old firmware of the TDC3620 hangs the SCSI bus upon serial
number requests.  Don't ask it so.
1998-11-25 13:50:10 +00:00
Kenneth D. Merry
22b9c86cfd Fix a few problems that Bruce noticed about a month ago, and fix oup one
other problem.

- Hold onto splsoftcam() in the peripheral driver open routines until we
  have locked the periph.  This eliminates a race condition.

- Disallow opening the pass driver when securelevel > 1.

- If a user tries to open the pass driver with O_NONBLOCK set, return
  EINVAL instead of ENODEV.  (noticed by gibbs)
1998-11-22 23:44:47 +00:00
Kenneth D. Merry
25e5ca272b Generalize the quirk entry that disables multi-lun probing for Sony CDROM
drives.  It seems that quite a few (possibly all?) of their drives respond
to inquiries on multiple luns.  Hopefully we can detect problems like this
in the probe phase at some point.  For now, this is a pretty functional
solution.
1998-11-04 19:56:24 +00:00
Kenneth D. Merry
ee9c90c75c Fix a problem with the way we handled device invalidation when attaching
to a device failed.

In theory, the same steps that happen when we get an AC_LOST_DEVICE async
notification should have been taken when a driver fails to attach.  In
practice, that wasn't the case.

This only affected the da, cd and ch drivers, but the fix affects all
peripheral drivers.

There were several possible problems:
 - In the da driver, we didn't remove the peripheral's softc from the da
   driver's linked list of softcs.  Once the peripheral and softc got
   removed, we'd get a kernel panic the next time the timeout routine
   called dasendorderedtag().
 - In the da, cd and possibly ch drivers, we didn't remove the
   peripheral's devstat structure from the devstat queue.  Once the
   peripheral and softc were removed, this could cause a panic if anyone
   tried to access device statistics.  (one component of the linked list
   wouldn't exist anymore)
 - In the cd driver, we didn't take the peripheral off the changer run
   queue if it was scheduled to run.  In practice, it's highly unlikely,
   and maybe impossible that the peripheral would have been on the
   changer run queue at that stage of the probe process.

The fix is:
 - Add a new peripheral callback function (the "oninvalidate" function)
   that is called the first time cam_periph_invalidate() is called for a
   peripheral.

 - Create new foooninvalidate() routines for each peripheral driver.  This
   routine is always called at splsoftcam(), and contains all the stuff
   that used to be in the AC_LOST_DEVICE case of the async callback
   handler.

 - Move the devstat cleanup call to the destructor/cleanup routines, since
   some of the drivers do I/O in their close routines.

 - Make sure that when we're flushing the buffer queue, we traverse it at
   splbio().

 - Add a check for the invalid flag in the pt driver's open routine.

Reviewed by:	gibbs
1998-10-22 22:16:56 +00:00
Justin T. Gibbs
bb1f2fe47f Add a mechanism to send a non-tagged transaction even if a device is
currently operating in a tagged mode.  The SIM driver should determine
if a device is in tag mode by looking at the CAM_TAG_ACTION_VALID flag
in the ccb header.  If the flag is set, the tag_action field is either
a SCSI II tag message (simple, ordered, head) or CAM_TAG_ACTION_NONE
to specify that no tagging should be performed.
1998-10-15 23:17:35 +00:00
Kenneth D. Merry
50642f180c Fix several potential buffer overrun conditions. These changes have been
tested both in the kernel and in userland.  Also, fix a couple of printf
warnings that show up when CAMDEBUG is defined.

Reviewed by:		imp
Partially submitted by:	imp
1998-10-15 19:08:58 +00:00
Kenneth D. Merry
11021a1ab5 Clean up some unused variables.
Reviewed by:	ken
Submitted by:	phk
1998-10-15 17:46:26 +00:00
Kenneth D. Merry
1b6833dbb1 Narrow the quirk entry for the Seagate Elite 9 a bit to just cover drives
with 71* firmware revisions.  Scott Mace <smace@intt.ORG> reports that
drives with 00* firmware revisions do tagged queueing just fine.
1998-10-14 22:51:51 +00:00
Kenneth D. Merry
8597eafed0 Disable tagged queueing for the Seagate Elite 9GB drives. They tend to get
hung up when you send tags to them too quickly.  (CAM is able to recover
from the problem, but this just avoids it altogether.)

Reviewed by:	gibbs
Reported by:	Bret Ford <bford@uop.cs.uop.edu>
	and:	Martin Renters <martin@tdc.on.ca>
1998-10-14 21:17:39 +00:00
Kenneth D. Merry
718cd18c53 Disable cache syncs for a broken NEC drive.
Reviewed by:	gibbs
Submitted by:	Blaz Zupan <blaz@gold.amis.net>
1998-10-13 23:34:54 +00:00
Kenneth D. Merry
60a899a075 Fix a bug in the error recovery code. It was possible to have more than
one error recovery action oustanding for a given peripheral.

This is bad for several reasons.  The first problem is that the error
recovery actions would likely be to fix the same problem.  (e.g., we
queue 5 CCBs to a disk, and the first one comes back with 0x04,0x02.  We
start error recovery, and the second one comes back with the same status.
Then the third one comes back, and so on.  Each one causes the drive to get
nailed with a start unit, when we really only need one.)

The other problem is that we only have space to store one CCB while we're
doing error recovery.  The subsequent error recovery actions that got
started were over-writing the CCBs from previous error recovery actions,
but we still tried to call the done routine N times for N error recovery
actions.  Each call to dadone() was done with the same CCB, though.  So on
the second one, we got a "biodone: buffer not busy" panic, since the buffer
in question had already been through biodone().

In any case, this fixes things so that any any given time, there's only one
error recovery action outstanding for any given peripheral driver.

Reviewed by:	gibbs
Reported by:	Philippe Regnauld <regnauld@deepo.prosa.dk>
[ Philippe wins the "bug finder of the week" award ]
1998-10-13 21:41:32 +00:00
Kenneth D. Merry
fce84cb42b Fix a bug in the scan lun code that showed up when we did the following
sequence of things:

- spin up a disk
  - send an async event to refresh the inquiry data
    - run through xpt_scan_lun() to re-probe the device
        - eventually finish the probe, but panic in xpt_done() because the
          periph pointer wasn't set.

Reviewed by:	gibbs
Reported by:	Philippe Regnauld <regnauld@deepo.prosa.dk>
1998-10-13 21:29:04 +00:00
David Greenman
6cde7a165f Fixed two potentially serious classes of bugs:
1) The vnode pager wasn't properly tracking the file size due to
   "size" being page rounded in some cases and not in others.
   This sometimes resulted in corrupted files. First noticed by
   Terry Lambert.
   Fixed by changing the "size" pager_alloc parameter to be a 64bit
   byte value (as opposed to a 32bit page index) and changing the
   pagers and their callers to deal with this properly.
2) Fixed a bogus type cast in round_page() and trunc_page() that
   caused some 64bit offsets and sizes to be scrambled. Removing
   the cast required adding casts at a few dozen callers.
   There may be problems with other bogus casts in close-by
   macros. A quick check seemed to indicate that those were okay,
   however.
1998-10-13 08:24:45 +00:00
Kenneth D. Merry
621a60d46b Add a "dummy light" (actually two dummy lights) to catch people who don't
have the passthrough device configured in their kernel.

This will hopefully reduce the number of people complaining that they can't
get {camcontrol, xmcd, tosha, cdrecord, etc.} to work.

Reviewed by:	gibbs
1998-10-12 21:54:13 +00:00
Kenneth D. Merry
458c85235c Add quirk entries to disable the synchronize cache command for Micropolis
2217's (reported by Matthew Jacob in NetBSD PR kern/6027) and Fujitsu
M2954's (reported by Tom Jackson).

Some of the Fujitsus at least hang when they get a cache sync command.
(Others just return illegal request.)

Also, make error printing in dashutdown() a little more selective.  Don't
print any error when the sense key is illegal request.  Drives that don't
support the synchronize cache command usually return illegal request.
Also, make sure the scsi status is check condition before going into
scsi_sense_print().

Reviewed by:	gibbs
1998-10-12 17:16:47 +00:00
Kenneth D. Merry
d5ef4c961a Bring over a quirk entry from the old SCSI code for a Chinon CDROM drive
that returns track numbers in BCD.

Reviewed by:	gibbs
1998-10-12 17:02:37 +00:00
Justin T. Gibbs
2863f7b147 If the bus delay is >= 2 seconds, notify the user that we are waiting
for devices to settle.  This will hopefully allay any 'first installation'
fears that the machine has hung.
1998-10-10 21:10:36 +00:00
Kenneth D. Merry
8e35ba93ae Add the quirk entry framework to handle disabling the synchronize cache
command on drives that don't like it.  Right now, there's just a bogus
quirk entry in the table that doesn't do anything, but that should be
changed once we get actual inquiry data for drives that don't like the
synchronize cache command.

Also, add a shutdown hook that runs through all direct access peripherals
and runs a synchronize cache on them if they're still open, and if
synchronize cache isn't disabled via a quirk entry.

Add a synchronize cache call at the end of dadump() (again, conditionalized
on the quirk entry), so we can insure that the disk cache contents get
flushed to physical media after a dump.

Check the new quirk entry in daclose() to decide whether or not to
synchronize the cache for a disk at final close.

Reviewed by:	gibbs
1998-10-08 05:46:38 +00:00
Justin T. Gibbs
2ba01e6ff4 Add a quirk entry for the CFP2107, another drive with broken
tagged queuing support.

Ensure that we report that a device supports tagged queuing even if
the system is waiting a "command count delay" before starting to use
them.

If a user disables disconnects on a device ensure that tagged queuing
is also turned off.  We did the right thing during initial configuration,
but could be confused by manual changes.
1998-10-07 03:25:21 +00:00
Warner Losh
6a3722a752 Up the read capacity timeout from 20 seconds to 60 seconds to keep my
JAZ drive happy.  This shouldn't impact fast drives, and will keep cam
from failing on very slow ones (that are spinning up, say).  20
seconds was almost long enough, but not in all cases.

Suggested by: gibbs
1998-10-07 03:09:19 +00:00
Kenneth D. Merry
777cfc2acd Some fixes for the CD and DA drivers from bde. (and some of my own as
well)  Among them:

[ cd driver ]
1. Old labeling code was still there.
2. Error handling for dsopen() was broken (no test for the `error'
   returned by dsopen(); bogus test of an `error' that is known to be 0).
3. cdopen() closed the physical device after certain errors although there
   may still be open partitions on it.
4. cdclose() closed the physical device although there may still be open
   partitions on it.
5. Some printf format fixes was incomplete or missing.
6. cdioctl() truncated unit numbers mod 256.
7. cdioctl() was missing locking.

[ da driver ]
1. daclose() closed the physical device although there may still be open
   partitions on it.  This was fixed many years ago in sd.c rev.1.57.
2. A minor optimization (the dk_slices != NULL test) in sdopen() became
   uglier in daopen().  It is not worth doing.  da only regressed compared
   with od and my version of sd, since I never committed the change to sd.
   daopen() should probably do less if some partition is already open.
   This is not addressed by the diffs.
[ ... ]
5. "opt_hw_wdog.h" was not included, so the HW_WDOG code was unreachable.

- Added a getdev CCB call in the cdopen() and daopen() calls so that the
  vendor name and device name are available for the disklabel.  (suggested
  by bde)

- Removed vestigal devfs support in both drivers, since we can't properly
  work with devfs yet.  (ask bde for details on this)

- Cleaned up the probe code in both drivers in the failure cases.  There
  were a number of things wrong here.  The peripheral driver instances
  weren't getting properly cleaned up.  Sometimes the wrong probe message
  would get printed out (with the failure message appended), so it wasn't
  very clear that we failed to attach.  SCSI sense information was printed,
  even when the error in question wasn't a SCSI error.  I put similar fixes
  into the changer driver in revision 1.2 of scsi_ch.c.

Reviewed by:	gibbs
Submitted by:	bde (partially)
1998-10-07 02:57:57 +00:00
Kenneth D. Merry
b1d26455e0 Disable multi-lun probing and serial number inquiries for the Exabyte 8200. 1998-10-06 19:27:19 +00:00
Kenneth D. Merry
6326180fab Fix a printf format warning that shows up when CAMDEBUG is defined. 1998-10-02 21:20:21 +00:00
Kenneth D. Merry
d05caa00c5 Add a new CAM debugging mode, CAM_DEBUG_CDB. This causes the kernel to
print out a one line description/dump of every SCSI CDB sent to a
particular debugging target or targets.

This is a good bit more useful than the other debugging modes, I think.

Change some things in LINT to note the availability of this new option.

Fix an erroneous argument to scsi_cdb_string() in scsi_all.c

Reviewed by:	gibbs
1998-10-02 21:00:58 +00:00
Kenneth D. Merry
696db22238 Modify the changer driver so it can handle (hopefully!) changers that need
block descriptors enabled on mode sense commands.

Basically, we try sending a mode sense with block descriptors disabled (the
previous default), and if it fails, we try sending the mode sense with
block descriptors enabled.  If that works, we note that in a runtime quirk
entry, so we don't bother disabling block descriptors again for the device.

This problem was first reported by Chris Jones <cjones@honors.montana.edu>
on one of the NetBSD lists, but I'd imagine that some FreeBSD users would
have run into it eventually as well, since our changer driver is derived
form the NetBSD changer driver.

Also, change some of the probe logic so that we do the right thing in the
case of a failure to attach.

Fix a memory leak in chgetparams().

Add a couple of inline helper functions to scsi_all.h to correctly return
the start of a mode page.

NetBSD PR:	kern/6214
Reviewed by:	gibbs
1998-10-02 05:25:49 +00:00
Kenneth D. Merry
9dfb44710e Patches from DES to create three new kernel config options to control
timeouts in the SA driver (timeouts for space, rewind and erase).  Folks
can lengthen the timeouts if their hardware is especially slow, or shorten
them if they want to be notified of errors a little sooner.

Also, get rid of two OD driver options.  The od driver has been made
obsolete by the da driver.

Reviewed by:	ken, gibbs
Submitted by:	Dag-Erling Coidan Smørgrav <des@FreeBSD.ORG>
1998-10-02 05:15:51 +00:00
Kenneth D. Merry
e5b118dd3d In the bootverbose case, print out error messages for all errors that will
not be retried again, even if the SF_NO_PRINT flag is set.

Reviewed by:	gibbs
1998-09-29 22:11:30 +00:00
Bruce Evans
2e8bf20912 Fixed printf format errors. u_long is not necessarily suitable for casting
pointers to, and %d is not suitable for printing uint32_t's.
1998-09-29 09:18:08 +00:00
Justin T. Gibbs
03e3511b47 Correct problems with xpt_set_transfer_settings and async transfer
negotiation changes with wildcarded paths.
1998-09-25 22:35:56 +00:00
Justin T. Gibbs
f0adc79010 Fix a few problems with the tag delay code:
- Tagged devices were limited to one transaction (oops)
 - We revert to untagged with a tag delay if the user changed the
   transfer negotiation values (via perhaps camcontrol some day).
 - xpt_async did not use the expanded path in some cases which could
   cause a panic.
1998-09-24 22:43:54 +00:00
Kenneth D. Merry
54cbee5db2 Treat not ready errors (asc 0x04) as non-fatal errors for attach. We
already allowed medium not present type errors (0x3a), but some Philips and
HP WORM drives return 0x04,0x00 when you issue a read capacity without
media in the drive.
1998-09-23 03:17:08 +00:00
Justin T. Gibbs
fd21cc5ee0 Allow 5 untagged commands to go to a device before enabling tags after
enabling transfer negotiations, a BDR, or a bus reset to allow the controller
driver to negotiate without tagged messages getting in the way.  Some
devices are confused by attempts to negotiate and tag at the same time.
Some controllers (e.g. BT MultiMaster with certain firmware revs) will
never negotiate if you don't give them an untagged "window" to perform
negotiation in.

Bump the maximum tag count to 255.  The system reclaims unused tag space
as the tag count is dropped anyway, so we might as well try the max.

We should probably use a larger type than u_int8_t to hold our tag value
as SCSI over certain mediums allows for higher values.

Reviewed by:	 Kenneth Merry <ken@FreeBSD.org>
1998-09-23 03:03:19 +00:00
Kenneth D. Merry
f24c39c7d5 Add several quirks:
Western Digital Enterprise drives have sorry performance (1.5MB/sec versus
8MB/sec) when doing tagged queueing.  Disable tagged queueing for them.

Submitted by:	Andrew Gallatin <gallatin@cs.duke.edu>

Some Sony CDROM drives don't like it when we probe more than one LUN.

Verified by:    Jean-Marc Zucconi <jmz@FreeBSD.ORG>

Some Sony CD-R's don't like multi-LUN probing either.

Submitted by:   Parag Patel <parag@cgt.com>
1998-09-22 20:41:12 +00:00
Justin T. Gibbs
53b062d3cc cam.c:
Clear up trailing NULs in cam_strvis.

cam_xpt.c:
	Nuke an experimental quirk entry for the Toshiba 3401.  The real
	problem with this device turned out to be a bug in the aic7xxx
	driver that was fixed months ago.

	Add a quirk entry to inhibit multiple lun scanning and serial number
	probing of DPT RAID volumes.  My DPT controller hangs up solid when
	I do either of these things to a RAID 1 volume.
1998-09-22 04:53:23 +00:00
Kenneth D. Merry
050279e55a Some fixes to the CD driver that may fix PR kern/7996. The data direction
flags on some of the operations in the driver weren't quite right.  Also,
clean up scsi_cd.h, change u_char to u_int8_t.

I'm surprised this problem didn't show up sooner.  (the code has been in
there almost a year and a half)

PR:		        7996
Reviewed by:	        ken
Submitted (mostly) by:	gibbs
1998-09-20 22:48:15 +00:00
Justin T. Gibbs
0c4930f525 Don't invalidate devices due to unexpected unit attention errors. In
a perfect world, we'd notice the UA and do some device validation to ensure
that the device hasn't changed.  We may get this before the year ends,
but not before 3.0R.  This change gives the adminstrator ample ammunition
to take off a foot or two, but hey this *is* UN*X.
1998-09-20 07:17:11 +00:00
Justin T. Gibbs
e471e974cc cam_xpt.c:
Add quirk entry for a Samsung drive that doesn't like experiencing
	the queue full condition.

	Bump the timeouts for all probe activities to 60s.  We don't know
	what the seletion timeout (or equivelent on other mediums) is
	for controllers, which can make the transactions at the tail
	end of a parallel probe take a while to complete.  The DPT
	seems to be a card that takes a long time to see a selection timeout.

cam_periph.c:
	Don't call a device "gone" after a single selection timeout.  We
	need to come up with a better policy.  Until that time, you'll
	have to manually re-scan a bus via camcontrol for the system to
	decide that a device is really gone.  This should give devices
	experiencing temporary insanity to escape death.
1998-09-20 07:14:36 +00:00
Justin T. Gibbs
ecdf111388 Only deregister out configuration hook manually if there are no SCSI
busses to configure.
1998-09-20 05:03:34 +00:00
Justin T. Gibbs
9eec0f7d5a Don't leave the device queue in a frozen state if the Synchronize Cache
command on close fails.
1998-09-19 04:59:35 +00:00
Kenneth D. Merry
66411419a6 Fix error recovery in scsi_interpret_sense(). It turns out that ERESTART
wasn't getting sent back for most errors, even if there were retries left
on the command.  I'm not sure how I ever let this slip by before...

In any case, we now send back ERESTART if there are retries left for the
command, and send back the default error code when there are no retries
left.

Reviewed by:	gibbs
1998-09-19 01:23:04 +00:00
Kenneth D. Merry
37b9efd37b Fix the CAM code so that people can compile kernels with the CD driver but
without the DA driver.

The problem was that the CD driver depended on scsi_read_write() and
scsi_start_stop(), which were defined in scsi_da.c.

I moved both functions, and their associated data structures and defines
from scsi_da.* to scsi_all.*.  This is technically the "wrong" thing to do
since those commands are really only for direct-access type devices, not
for all SCSI devices.  I think, though, that the advantage (allowing people
to compile kernels without the disk driver) outweighs any architectural
purity arguments.

PR:		kern/7969
Reviewed by:	gibbs
1998-09-18 22:33:59 +00:00
Kenneth D. Merry
6747168dc9 Change the Atlas II quirk entries so they work with differential Atlas
II's.  Also, add a quirk entry for the 2 gig Atlas II.

Partially Submitted by:	Ted Buswell <tbuswell@mediaone.net>
1998-09-18 19:55:34 +00:00
Kenneth D. Merry
a822eb2a8b Fix a formatting error.
Fix a problem reported by bde:  setting SCSI_DELAY to 0 doesn't work.  Now,
when the user sets SCSI_DELAY to 0, we re-set it to the minimum allowable
bus settle delay (100ms).

Fix a potential panic in xptfinishconfigfunc() if the CCB passed in is
NULL.  Reported by, I think, Nicolas Souchu.  Fix a memory leak in the same
function (we created a path, but didn't free it) by allocating the getdev
CCB and path on the stack.

Reviewed by:	gibbs
1998-09-17 23:58:53 +00:00
Kenneth D. Merry
c5e6ca4410 Some Alpha patches for CAM from Doug Rabson.
Reviewed by:	gibbs
Submitted by:	dfr
1998-09-16 23:30:11 +00:00
Justin T. Gibbs
9bc66b835c Properly allocate our, per lun, probe peripheral softc from
the TEMP malloc pool.

Noticed by: Don Lewis <Don.Lewis@tsc.tdk.com>
1998-09-16 13:24:37 +00:00
Kenneth D. Merry
66a0780e8e Check to make sure that this device is opened read-write, not just read
only.  Previously, if the device was chmoded 644, someone could open it
with the O_RDONLY flag and issue any ioctl to the device.

Reviewed by:	imp, gibbs
1998-09-16 00:11:53 +00:00
Justin T. Gibbs
5ee58402df Correct printf format bugs. 1998-09-15 22:05:44 +00:00
Justin T. Gibbs
76babe507b SCSI Peripheral drivers for CAM:
da	- Direct Access Devices (disks, optical devices, SS disks)
	cd	- CDROM (or devices that can act like them, WORM, CD-RW, etc)
	ch	- Medium Changer devices.
	sa	- Sequential Access Devices (tape drives)
	pass	- Application pass-thru driver
	targ	- Target Mode "Processor Target" Emulator
	pt	- Processor Target Devices (scanners, cpus, etc.)

Submitted by:	The CAM Team
1998-09-15 06:36:34 +00:00
Justin T. Gibbs
8b8a9b1d3e CAM Transport Layer (XPT).
Submitted by:	The CAM Team
1998-09-15 06:33:23 +00:00