Previously, we used all info (including -1 or "not present") which would
keep the system from reaching 100% when charging.
Reported by: Eric Anderson
MFC after: 2 days
- Add locked versions of the init() and start() methods.
- Use callout_*() rather than timeout().
- Make the driver lock non-recursive.
- Push down locking in detach() and ioctl().
- Fix the tick routine to bail if the interface has been stopped and use
callout_drain() in detach() after the call to stop().
- Lock the driver lock in the ifmedia handlers.
Tested by: Ketrien I. Saihr-Kesenchedra ketrien at error404.nls.net
MFC after: 1 week
0. This means that we 'succeed' the attach, even after we've freed
the internal data bits. This leads to a panic when you eject the card
with this problem.
Set error = ENXIO in the mac read zeros case.
if_attach(). This allows ethernet drivers to use it in their routines
to program their MAC filters before ether_ifattach() is called (de(4) is
one such driver). Also, the if_addr mutex is destroyed in if_free()
rather than if_detach(), so there was another potential bug in that a
driver that failed during attach and called if_free() without having
called ether_ifattach() would have tried to destroy an uninitialized mutex.
Reported by: Holm Tiffe holm at freibergnet dot de
Discussed with: rwatson
as opt_vmpage.h will not be available to user space library builds. A
similar existing check is present for KLD_MODULE for similar reasons.
MFC after: 3 days
when using mice containing a tilt movement: there was a missing
usb_callout_init() for the UMS_SPUR_BUT_UP quirk code, and UMS_T
was defined to the same flag value as UMS_SPUR_BUT_UP.
Reported by: flz
MFC after: 3 days
lists, as well as accessor macros. For now, this is a recursive mutex
due code sequences where IPv4 multicast calls into IGMP calls into
ip_output(), which then tests for a multicast forwarding case.
For support macros in in_var.h to check multicast address lists, assert
that in_multi_mtx is held.
Acquire in_multi_mtx around iteration over the IPv4 multicast address
lists, such as in ip_input() and ip_output().
Acquire in_multi_mtx when manipulating the IPv4 layer multicast addresses,
as well as over the manipulation of ifnet multicast address lists in order
to keep the two layers in sync.
Lock down accesses to IPv4 multicast addresses in IGMP, or assert the
lock when performing IGMP join/leave events.
Eliminate spl's associated with IPv4 multicast addresses, portions of
IGMP that weren't previously expunged by IGMP locking.
Add in_multi_mtx, igmp_mtx, and if_addr_mtx lock order to hard-coded
lock order in WITNESS, in that order.
Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca>
MFC after: 10 days
holders. The license that was approved for my changes to this driver
originally came from LSI, but the changes to the driver core are not
owned by LSI.
MFC: 1 day
caller by saving the stack of the last locker/unlocker in lockmgr. We
also put the stack in KTR at the moment.
Contributed by: Antoine Brodin <antoine.brodin@laposte.net>
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.
Problem reported by: Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week
using ifp->if_addr_mtx:
- Initialize if_addr_mtx when ifnet is initialized.
- Destroy if_addr_mtx when ifnet is torn down.
- Rename ifmaof_ifpforaddr() to if_findmulti(); assert if_addr_mtx.
Staticize.
- Extract ifmultiaddr allocation and initialization into if_allocmulti();
accept a 'mflags' argument to indicate whether or not sleeping is
permitted. This centralizes error handling and address duplication.
- Extract ifmultiaddr tear-down and deallocation in if_freemulti().
- Re-structure if_addmulti() to hold if_addr_mtx around manipulation of
the ifnet multicast address list and reference count manipulation.
Make use of non-sleeping allocations. Annotate the fact that we only
generate routing socket events for explicit address addition, not
implicit link layer address addition.
- Re-structure if_delmulti() to hold if_addr_mtx around manipulation of
the ifnet multicast address list and reference count manipulation.
Annotate the lack of a routing socket event for implicit link layer
address removal.
- De-spl all and sundry.
Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week
ifp->if_resolvemulti(), do so with M_NOWAIT rather than M_WAITOK, so
that a mutex can be held over the call. In the FDDI code, add a
missing M_ZERO. Consumers are already aware that if_resolvemulti()
can fail.
MFC after: 1 week
lists. Add accessor macros.
This changes the size of struct ifnet, but ideally, all ifnet consumers
are now using if_alloc() to allocate these structures rather than
embedding them into device driver softc's, so this won't modify the
network device driver ABI.
MFC after: 1 week
- Conforming to the latest ether_ifattach() change;
- Moving PCCARD_API_LEVEL to the right place.
Reported and Tested by: Vladimir Grebenschikov <vova at fbsd dot ru>
MFC after: 3 days
FreeBSD specific ip_newid() changes NetBSD does not have.
Correct handling of non AF_INET packets passed to bpf [2].
PR: kern/80340[1], NetBSD PRs 29150[1], 30844[2]
Obtained from: NetBSD ip_gre.c rev. 1.34,1.35, if_gre.c rev. 1.56
Submitted by: Gert Doering <gert at greenie.muc.de>[2]
MFC after: 4 days
primary vendor id for this device. The location is empty because ISA
doesn't give one a way to generally locate a card. PNP BIOS entries
do provide a way to locate cards, as do isa pnp cards. These
locations will be added as soon as the code to remember them is
written.
1. Support wide range sampling rate, as low as 1hz up to int32 max
(which is, insane) through new feeder_rate, multiple precisions
choice (32/64 bit converter). This is indeed, quite insane, but it
does give us more room and flexibility. Plenty sysctl options to
adjust resampling characteristics.
2. Support 24/32 bit pcm format conversion through new, much improved,
simplified and optimized feeder_fmt.
Changes:
1. buffer.c / dsp.c / sound.h
* Support for 24/32 AFMT.
2. feeder_rate.c
* New implementation of sampling rate conversion with 32/64 bit
precision, 1 - int32max hz (which is, ridiculous, yet very
addictive). Much improved / smarter buffer management to not
cause any missing samples at the end of conversion process
* Tunable sysctls for various aspect:
hw.snd.feeder_rate_ratemin - minimum allowable sampling rate
(default to 4000)
hw.snd.feeder_rate_ratemax - maximum allowable sampling rate
(default to 1102500)
hw.snd.feeder_rate_buffersize - conversion buffer size
(default to 8192)
hw.snd.feeder_rate_scaling - scaling / conversion method
(please refer to the source for explaination). Default to
previous implementation type.
3. feeder_fmt.c / sound.h
* New implementation, support for 24/32bit conversion, optimized,
and simplified. Few routines has been removed (8 to xlaw, 16 to
8). It just doesn't make sense.
4. channel.c
* Support for 24/32 AFMT
* Fix wrong xruns increment, causing incorrect underruns statistic
while using vchans.
5. vchan.c
* Support for 24/32 AFMT
* Proper speed / rate detection especially for fixed rate ac97.
User can override it using kernel hint:
hint.pcm.<unit>.vchanrate="xxxx".
Notes / Issues:
* Virtual Channels (vchans)
Enabling vchans can really, really help to solve overrun
issues. This is quite understandable, because it operates
entirely within its own buffering system without relying on
hardware interrupt / state. Even if you don't need vchan,
just enable single channel can help much. Few soundcards
(notably via8233x, sblive, possibly others) have their own
hardware multi channel, and this is unfortunately beyond
vchan reachability.
* The arrival of 24/32 also come with a price. Applications
that can do 24/32bit playback need to be recompiled (notably
mplayer). Use (recompiled) mplayer to experiment / test /
debug this various format using -af format=fmt. Note that
24bit seeking in mplayer is a little bit broken, sometimes
can cause silence or loud static noise. Pausing / seeking
few times can solve this problem.
You don't have to rebuild world entirely for this. Simply
copy /usr/src/sys/sys/soundcard.h to
/usr/include/sys/soundcard.h would suffice. Few drivers also
need recompilation, and this can be done via
/usr/src/sys/modules/sound/.
Support for 24bit hardware playback is beyond the scope of
this changes. That would require spessific hardware driver
changes.
* Don't expect playing 9999999999hz is a wise decision. Be
reasonable. The new feeder_rate implemention provide
flexibility, not insanity. You can easily chew up your CPU
with this kind of mind instability. Please use proper
mosquito repellent device for this obvious cracked brain
attempt. As for testing purposes, you can use (again)
mplayer to generate / play with different sampling rate. Use
something like "mplayer -af resample=192000:0:0 <files>".
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
1) 32bit data, packed within 32bit (4bytes) boundary.
2) 24bit data, packed within 32bit (4bytes) boundary where the data
is stored in the 24 most significant bits and least significant 8
bits are not used and should be set to 0.
While this might hold true in few cases, lots of applications (notably
mplayer, sweep) really deal / produce 24bit as what they should meant
to be: 24bit data / 3bytes per sample.
To handle this "true" 24bit pcm format add AFMT_x24_xE, so the in-kernel
conversion space did not confuse itself with 32bit variant.
You need to rebuild mplayer after installing this change (this header and
the upcomming kernel changes), if you want to use this new feature.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
This mostly to help CT4730, but apparently it does help other
cards too (especially via8233x). This probably need further test
and confirmation from other people with ac97 cards other than via
/ es137x.
* Aggresive dac power wake up call, again, to help CT4730 (and
probably others).
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
- Don't mark MPSAFE (yet).
- DSP_CMD_DMAEXIT_8 doesn't work on old cards, use sb_reset_dsp() instead.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
* Add kernel hint option to disable DXS channels entirely. Report
from several skype users / Pav Lucistnik indicate that disabling
DXS may fix lots of pop / crackling noise. To disable DXS add
hint.pcm.<unit>.via_dxs_disabled="1" to /boot/device.hints.
Further investigation of the issues regarding DXS showed, that
the problem is in another (more generic) place, but until the
right fix is tested/reviewed this may help a little bit.
Added sysctl's to aid testing/debugging:
hint.pcm.<unit>.via_dxs_disabled=X - Disable / Enable DXS channels entirely
hint.pcm.<unit>.via_dxs_channels=X - Limit DXS channels up to X
hint.pcm.<unit>.via_sgd_channels=X - Limit SGD channels up to X
hint.pcm.<unit>.via_dxs_src=X - Enable / Disable DXS sample rate
converter.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
especially for CT4730 / EV1938 chip, causing misconfigured mixer
(David Xu), crippled after power cycle (Kevin Oberman). Fixed.
* Incorporate locking/spdif patches from Jon Noack / matk. Not all
es137x can really do spdif, clean it up a bit to only let few capable
chip. This adds a "hw.snd.pcm<unit>.spdif_enabled" sysctl until
a more generic way of handling this from userland (by an ordinary
user) is designed/implemented.
* Convert all bus_space_(read|write) to use es_rd/es_wr, simmilar
with other drivers.
* Add tunable hw.snd.pcm<unit>.latency_timer sysctl to toggle pci
latency timer value on the fly. Much noise / pop / crackling
issues can be solved by increasing its value. Other people have
pointed out to use pciconf instead, but this is just an added
value specific for CT4730/EV1938.
* Remove es137x specific debug sysctl/code.
Several PRs can now be closed.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Submitted by: Jon Noack <noackjr@alumni.rice.edu> (implicit)
Submitted by: matk (implicit)
PR: 59349, 68594, 73498
Tested by: multimedia@
kenv environment in kern_environment.c switches to dynamic kenv. The prior
call sets the static variable hintp to the static hints in subr_hints.c
(hintmode==0).
However, changes to the environment are not detected by the resource_xxx
lookups after the change to dynamic kernel environment, so the lookup
routines only report the old stuff of hintmode==0, even after the change to
the dynamic kenv. This causes kenv users to see a different environment than
the kernel routines.
This is a problem in the mixer.c code that looks up initial mixer volume
settings from the hints: If the hints are dynamic and not from the
device.hints file, mixer.c doesn't see them, but kenv does.
The patch from the PR (modified to comply to the style of the function)
solves this.
PR: 83686
Submitted by: Harry Coin <harrycoin@qconline.com>
This has no security implications since only root is allowed to use
kenv(1) (and corrupt the kernel memory after adding too much variables
previous to this commit).
This is based upon the PR [1] mentioned below, but extended to check both
bounds (in case of an overflow of the counting variable) and to comply
to the style of the function. An overflow of the counting variable
shouldn't happen after adding the check for the upper bound, but better
safe than sorry (in case some other function in the kernel overwrites
random memory).
An interested soul may want to add a printf to notify root in case the
bounds are hit.
Also allocate KENV_SIZE+1 entries (the array is NULL-terminated), since
the comment for KENV_SIZE says it's the maximum number of environment
strings. [2]
PR: 83687 [1]
Submitted by: Harry Coin <harrycoin@qconline.com> [1]
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my> [2]
in the resource error in ep_alloc case. This results in a panic.
Zero resources to make it safe to call twice pending resolution of
layering questions.
MFC After: 3 days
mlx devices. This fixes an issue where mlx device drives fail to be
detected at system boot.
This is a RELENG_6 candidate.
Submitted by: oliver
PR: kern/84163
trap_subr.S: declare a stub for the a-unavailable trap
that does an absolute jump to the vector-assist trap.
This is due to the fact that the vec-unavail trap
doesn't start at a 256-byte boundary, so the trick of
masking the bottom 8 bits of the link register to identify
the interrupt doesn't work, so let the vec-assist
case handle Altivec-disabled for the time being.
Note that this will be fixed in the future with a much
smaller vector code-stub (< 16 bytes) that will allow
use of strange vector offsets that are also present in
4xx processors, and also allow smaller differences in
vector codepaths on the G5.
trap.c: Treat altivec-unavailable/assist process traps as SIGILL.
Not quite correct, since altivec-assist should really be a panic,
but it is fine for the moment due to the above measure.
machdep.c Install the stub code for the altivec-unavailable trap, and
the standard trap code at the altivec-assist.
Reported by: Andreas Tobler <toa at pop agri ch>
MFC after: 3 days
was not compiled with 'options HWPMC_HOOKS' or if the compiled-in
version numbers of the kernel and module are out of sync.
Reported by: cracauer
MFC after: 3 days
the vm_page_t associated with a pte using only the lower 32-bits of the pte
instead of the full 64-bits.
Submitted by: Greg Taleck greg at isilon dot com
Reviewed by: jeffr, alc
MFC after: 3 days
not mask the ExtINT pin on the first I/O APIC as at least one PIII chipset
seems to need this even though all of the pins in the 8259A's are masked.
The default is still to mask the ExtINT pin.
Reported by: Mike Tancsa mike at sentex.net
MFC after: 3 days
later sum capacities for all batteries, even those that weren't actually
present. We only need to do this for _BST but do it for all of them.
Reported by: Eric Anderson
MFC after: 1 day
too much even though we actually validate the parameters. This code
also is more compatible with other *BSDs, which do copyin within
setsockopt().
Submitted by: Keiichi SHIMA <keiichi__at__iijlab.net>
Reviewed by: security-officer (nectar)
Obtained from: KAME
Make sure that there actually is a next packet before setting
nextrecord to that field.
PR: 83885
Submitted by: hirose@comm.yamaha.co.jp
Obtained from: Patch suggested in the PR
MFC after: 1 week
