installation.
As part of the 'pkg-stage' target, copy the configuration file
to the 'packages/repos/' directory on the DVD filesystem.
MFC after: 3 days
X-MFC-Before: -RC3
Sponsored by: The FreeBSD Foundation
containing the trap instruction encoding (0x7c810808), and restoring it back
with the frame on return. This caused it to panic on my ppc32 machine, but
somehow my ppc64 machine overlooked it, because I was using such a simple
dtrace probe.
X-MFC-with: r259245
MFC after: 2 weeks
We need to do this because the Linux compat layer uses sx(9) for
mutex, however the lagg code uses rmlocks and calls into the mellanox
driver. This causes deadlock due to sleeping while holding a rmlock.
Submitted by: Shahar Klein (shahark mellanox.com)
MFC After: 3 days.
support all valid SAM-5 LUN IDs. CAM_VERSION is bumped, as the CAM ABI
(though not API) is changed. No behavior is changed relative to r257345
except that LUNs with non-zero high 32 bits will no longer be ignored
during device enumeration for SIMs that have set PIM_EXTLUNS.
Reviewed by: scottl
o Assign sc->an_dev in an_probe() (which isn't really a probe function in
the standard newbus sense) as we may need it for printing errors.
o Use device_printf() rather than if_printf() in an_reset() - this is
called from an_probe() long before the ifp structure is initialised
in an_attach().
o Initialize the ifp structure early in an_attach() as we use if_printf()
in cases where allocation of descriptors etc fails.
MFC after: 3 days
them up as part of firmware initialization (which the driver gets to do
only if it's the master driver).
Read the range of tids available for the ETHOFLD functionality if it's
enabled.
New is_ftid() and is_etid() functions to test whether a tid falls within
the range of filter tids or ETHOFLD tids respectively.
MFC after: 2 weeks
Promoting the SIGINFO handler's log message from LOG_INFO to
LOG_NOTICE, and promoting the "Processing event ..." message from
LOG_DEBUG to LOG_INFO. Setting the logfile to LOG_NOTICE with this
change will have the same result as setting it to LOG_INFO without
this change. Setting it to LOG_INFO with this change will include
the useful "Processing event ..." messages that were previously at
LOG_DEBUG, without including useless messages like "Pushing table".
The intent of this change is that one can log "Processing event ..."
without logging "Pushing table" and related messages that are sent
for every event. The number of lines actually logged is reduced by
about 75% by making this change and setting syslog to LOG_INFO vs
setting syslog to LOG_DEBUG.
etc/syslog.conf
Changing the recommended loglevel to notice instead of info.
Sponsored by: Spectra Logic Corp
MFC after: 4 weeks
Increase the size of devd's client socket's send buffer from the
default (8k) to 128k. This prevents clients from getting
POLLHUPped during event storms. For example, during zpool creation,
the kernel emits a resource.fs.zfs.statechange event for every vdev
in the pool. A 128k buffer is large enough to hold the statechange
events for a pool with nearly 800 drives.
Reviewed by: ian, imp
Approved by: ken (mentor)
Sponsored by: Spectra Logic Corp
MFC after: 4 weeks
RFC 4402 specifies the implementation of the gss_pseudo_random()
function for the krb5 mechanism (and the C bindings therein).
The implementation uses a PRF+ function that concatenates the output
of individual krb5 pseudo-random operations produced with a counter
and seed. The original implementation of this function in Heimdal
incorrectly encoded the counter as a little-endian integer, but the
RFC specifies the counter encoding as big-endian. The implementation
initializes the counter to zero, so the first block of output (16 octets,
for the modern AES enctypes 17 and 18) is unchanged. (RFC 4402 specifies
that the counter should begin at 1, but both existing implementations
begin with zero and it looks like the standard will be re-issued, with
test vectors, to begin at zero.)
This is upstream's commit f85652af868e64811f2b32b815d4198e7f9017f6,
from 13 October, 2013:
% Fix krb5's gss_pseudo_random() (n is big-endian)
%
% The first enctype RFC3961 prf output length's bytes are correct because
% the little- and big-endian representations of unsigned zero are the
% same. The second block of output was wrong because the counter was not
% being encoded as big-endian.
%
% This change could break applications. But those applications would not
% have been interoperating with other implementations anyways (in
% particular: MIT's).
Approved by: hrs (mentor, src committer)
MFC after: 3 days
===
DEBUG: Running installation step: services
local: Not in a function
/usr/libexec/bsdinstall/services: cannot create : Read-only file system
/usr/libexec/bsdinstall/services: /tmp/bsdinstall/etc/rc.conf.services: \
Permission denied
===
The `local: Not in a function' is obvious, and was introduced by myself in
SVN revision 256348.
The latter two are caused by the attempt to use "\" to continue the line
after using the ">>" redirect. This appears to attempt to write a file with
the name " " in the current directory and subsequently attempts to execute
the file that was originally intended for writing (which is not executable;
hence the `Permission denied'). That was introduced in SVN r228192 about
2 years ago, apparently unnoticed until I started going over the debug
outputs very carefully.
MFC after: 3 days
This will read the REPOS_DIR env/config setting (default is /etc/pkg
and /usr/local/etc/pkg/repos) and use the last enabled repository.
This can be changed in the environment using a comma-separated list,
or in /usr/local/etc/pkg.conf with JSON array syntax of:
REPOS_DIR: ["/etc/pkg", "/usr/local/etc/pkg/repos"]
Approved by: bapt
MFC after: 1 week
Historically creation of device aliases created symbolic links using only
name of target device as a link target, not considering current directory.
Fix that by adding number of "../" chunks to the terget device name,
required to get out of the current directory to devfs root first.
MFC after: 1 month
receiving Zero Length Packets, ZLPs. See comment in code for more
information.
MFC after: 1 week
Reported by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
When a da or ada device dissappears, outstanding IOs fail with
ENXIO, not EIO. The check for EIO was probably copied from Illumos,
where that is indeed the correct errno.
Without this change, pulling a busy drive from a zpool would usually
turn it into UNAVAIL, even though pulling an idle drive would turn
it into REMOVED. With this change, it is REMOVED every time.
Also, vdev_geom_io_intr shouldn't do zfs_post_remove, because that
results in devd getting two resource.fs.zfs.removed events. The
comment said that the event had to be sent directly instead of
through the async removal thread because "the DE engine is using
this information to discard prevoius I/O errors". However, the fact
that vdev_geom_io_intr was never actually sending the events until
now, and that vdev_geom_orphan never sent them at all, and that
vdev_geom_orphan usually gets called about 2 seconds after the
actual removal, means that FreeBSD's userland can cope with a late
event just fine.
Approved by: ken (mentor)
Sponsored by: Spectra Logic Corporation
MFC after: 4 weeks
In case of 4K allocation quantum that means for allocations up to 128K.
With growth of memory fragmentation these lists may grow to quite a large
sizes (tenths and hundreds of thousands items). Having in one list items
of different sizes in worst case may require full linear list traversal,
that may be very expensive. Having lists for items of single size means
that unless user specify some alignment or border requirements (that are
very rare cases) first item found on the list should satisfy the request.
While running SPEC NFS benchmark on top of ZFS on 24-core machine with
84GB RAM this change reduces CPU time spent in vmem_xalloc() from 8%
and lock congestion spinning around it from 20% to invisible levels.
And that all is by the cost of just 26 more pointers per vmem instance.
If at some point our kernel will start to actively use KVA allocations
with odd sizes above 128K, something may need to be done to bigger lists
also.
all the structures. While here, move a helper struct only used in
the kernel parser out of this header since it is not part of the MP
specification itself.
