directly from g7, the pcpu pointer. This guarantees correct behavior
when the thread migrates to a different CPU.
Commit message stolen from r205431. Additional testing by Peter Jeremy.
MFC after: 3 days
but also of different types, f.e. Sun Fire V890 can be equipped with a
mix of UltraSPARC IV and IV+ CPUs, requiring different MMU initialization
and different workarounds for model specific errata. Therefore move the
CPU implementation number from a global variable to the per-CPU data.
Functions which are called before the latter is available are passed the
implementation number as a parameter now.
- Modules and kernel code alike may use DPCPU_DEFINE(),
DPCPU_GET(), DPCPU_SET(), etc. akin to the statically defined
PCPU_*. Requires only one extra instruction more than PCPU_* and is
virtually the same as __thread for builtin and much faster for shared
objects. DPCPU variables can be initialized when defined.
- Modules are supported by relocating the module's per-cpu linker set
over space reserved in the kernel. Modules may fail to load if there
is insufficient space available.
- Track space available for modules with a one-off extent allocator.
Free may block for memory to allocate space for an extent.
Reviewed by: jhb, rwatson, kan, sam, grehan, marius, marcel, stas
frequencies (and having different cache sizes) so use the STICK
(System TICK) timer, which was introduced due to this and is
driven by the same frequency across all CPUs, instead of the
TICK timer, whose frequency varies with the CPU clock, to drive
hardclock. We try to use the STICK counter with all CPUs that are
USIII or beyond, even when not necessary due to identical CPUs,
as we can can also avoid the workaround for the BlackBird erratum
#1 there. Unfortunately, using the STICK counter currently causes
a hang with USIIIi MP machines for reasons unknown, so we still
use the TICK timer there (which is okay as they can only consist
of identical CPUs).
- Given that we only (try to) synchronize the (S)TICK timers of APs
with the BSP during startup, we could end up spinning forever in
DELAY(9) if that function is migrated to another CPU while we're
spinning due to clock drift afterwards, so pin to the CPU in order
to avoid migration. Unfortunately, pinning doesn't work at the
point DELAY(9) is required by the low-level console drivers, yet,
so switch to a function pointer, which is updated accordingly, for
implementing DELAY(9). For USIII and beyond, this would also allow
to easily use the STICK counter instead of the TICK one here,
there's no benefit in doing so however.
While at it, use cpu_spinwait(9) for spinning in the delay-
functions. This currently is a NOP though.
- Don't set the TICK timer of the BSP to 0 during at startup as
there's no need to do so.
- Implement cpu_est_clockrate().
- Unfortunately, USIIIi-based machines don't provide a timecounter
device besides the STICK and TICK counters (well, in theory the
Tomatillo bridges have a performance counter that can be (ab)used
as timecounter by configuring it to count bus cycles, though unlike
the performance counter of Schizo bridges, the Tomatillo one is
broken and counts Sun knows what in this mode). This means that
we've to use a (S)TICK counter for timecounting, which has the old
problem of not being in sync across CPUs, so provide an additional
timecounter function which binds itself to the BSP but has an
adequate low priority.
sizes (and running at different frequencies) so move the cacheinfo
to the PCPU data. While at it, remove some redundant and/or unused
members from struct cacheinfo.
- In sparc64_init don't assume the first CPU node we find in the OFW
device tree is the BSP.
- Rename PCPU_LAZY_INC into PCPU_INC
- Add the PCPU_ADD interface which just does an add on the pcpu member
given a specific value.
Note that for most architectures PCPU_INC and PCPU_ADD are not safe.
This is a point that needs some discussions/work in the next days.
Reviewed by: alc, bde
Approved by: jeff (mentor)
SpitFire erratum #54) which can cause writes to the TICK_CMPR register
to fail. This seems to fix the dying clocks problem reported by jhb@
and kris@. [1]
- In tick_start() don't reset the tick counter of the boot processor to
zero. It's initially reset in _start() and afterwards but _before_
tick_start() is called on the BSP the APs synchronise with the tick
counter of the BSP in mp_startup(). Resetting the tick counter of the
BSP in tick_start() probably also was the cause of problems seen when
using the CPU tick counter as timecounter on SMP machines.
Not resetting the tick counter of the BSP in mp_startup() makes the
tick counters and tick interrupts between the BSP and APs be pretty
much in sync as it's supposed to be. This also means there's no longer
a real reason to have separate tick_start() and tick_start_ap() so
merge them and zap tick_start_ap(). This is also a first step in
simplifying the interface to the tick counters in preparation to use
alternate clock hardware where available.
- Switch to the algorithm used on FreeBSD/ia64 for updating the tick
interrupt register and which compensates the clock drift caused by
varying delays between when the tick interrupts actually trigger and
when they are serviced. Not compensating the clock drift mainly hurts
interactive performance especially when using WITNESS. [2]
For further information about the algorithm also see the commit log
of sys/ia64/ia64/interrupt.c rev. 1.38.
On sparc64 the sysctls for monitoring the behaviour of the tick
interrupts are machdep.tick.adjust_edges, machdep.tick.adjust_excess,
machdep.tick.adjust_missed and machdep.tick.adjust_ticks.
- In tick_init() just use tick_stop() for stopping the tick interrupts
until a proper handler is set up later. This also stops the system
tick interrupt on USIII systems earlier.
- In tick_start() check for a rough upper limit of HZ.
- Some minor changes, e.g. use FBSDID, remove unused headers, etc.
Info obtained from: Linux [1]
Ok'ed by: marcel [2]
Additional testing by: kris (earlier version of the workaround), jhb
X-MFC after: 3 days [1]
struct vmspace is freed from cpu_sched_exit() to pmap_release().
This has the advantage of being able to rely on MI code to decide
when a free should occur, instead of having to inspect the reference
count ourselves.
At the same time, turn the per-CPU vmspace pointer into a pmap pointer,
so that pmap_release() can deal with pmaps exclusively.
Reviewed (and embrassing bug spotted) by: jake
on the loader to do it. Improve smp startup code to be less racy and to
defer certain things until the right time. This almost boots single user
on my dual ultra 60, it is still very fragile:
SMP: AP CPU #1 Launched!
Enter full pathname of shell or RETURN for /bin/sh:
# ls
Debugger("trapsig")
Stopped at Debugger+0x1c: ta %xcc, 1
db> heh
No such command
db>
with pmaps. When the context numbers wrap around we flush all user mappings
from the tlb. This makes use of the array indexed by cpuid to allow a pmap
to have a different context number on a different cpu. If the context numbers
are then divided evenly among cpus such that none are shared, we can avoid
sending tlb shootdown ipis in an smp system for non-shared pmaps. This also
removes a limit of 8192 processes (pmaps) that could be active at any given
time due to running out of tlb contexts.
Inspired by: the brown book
Crucial bugfix from: tmm
- The MI portions of struct globaldata have been consolidated into a MI
struct pcpu. The MD per-CPU data are specified via a macro defined in
machine/pcpu.h. A macro was chosen over a struct mdpcpu so that the
interface would be cleaner (PCPU_GET(my_md_field) vs.
PCPU_GET(md.md_my_md_field)).
- All references to globaldata are changed to pcpu instead. In a UP kernel,
this data was stored as global variables which is where the original name
came from. In an SMP world this data is per-CPU and ideally private to each
CPU outside of the context of debuggers. This also included combining
machine/globaldata.h and machine/globals.h into machine/pcpu.h.
- The pointer to the thread using the FPU on i386 was renamed from
npxthread to fpcurthread to be identical with other architectures.
- Make the show pcpu ddb command MI with a MD callout to display MD
fields.
- The globaldata_register() function was renamed to pcpu_init() and now
init's MI fields of a struct pcpu in addition to registering it with
the internal array and list.
- A pcpu_destroy() function was added to remove a struct pcpu from the
internal array and list.
Tested on: alpha, i386
Reviewed by: peter, jake
will be private to each CPU.
- Re-style(9) the globaldata structures. There really needs to be a MI
struct pcpu that has a MD struct mdpcpu member at some point.
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
- mostly complete kernel pmap support, and tested but currently turned
off userland pmap support
- low level assembly language trap, context switching and support code
- fully implemented atomic.h and supporting cpufunc.h
- some support for kernel debugging with ddb
- various header tweaks and filling out of machine dependent structures
to a new architecture. This is the base of the sparc64 port, but contains
limited machine dependent code, and can be used a base for ports. Included
are:
- standard machine dependent headers, tweaked for a 64 bit, big endian
architecture, including empty versions of all the machine dependent
structures
- a machine independent atomic.h, which can be used until a port has
support for interrupts and the operations really need to be atomic
- stub versions of all the machine dependent functions, which panic
when called and print out the name of the function that needs to
be implemented. functions which are normally in assembly files are
not included, but this should reduce the number of different undefined
references on the first few compiles from hundreds to 5 or 6
Given minimal startup code and console support it should be trivial to
make this compile and run the first few sysinits on almost any architecture.
Requested by: alfred, imp, jhb
