the right SIM in case the HBA is RAID-capable but the target in question is
not a hot spare or member of a RAID volume.
- Report the loss and addition of SAS and SATA targets detected via PHY link
status changes and signalled by MPI_EVENT_SAS_DEVICE_STATUS_CHANGE to cam(4)
as lost devices and trigger rescans as appropriate. Without this it can take
quite some time until a lost device actually is no longer tried to be used,
if it ever stops. [1]
- Handle MPI_EVENT_IR2, MPI_EVENT_LOG_ENTRY_ADDED, MPI_EVENT_SAS_DISCOVERY
and MPI_EVENT_SAS_PHY_LINK_STATUS silently as these serve no additional
purpose beyond adding cryptic entries to logs.
Thanks to Hans-Joerg Sirtl for providing one of the HBAs these changes were
developed with and RIP to the mainboard that didn't survive testing them.
PR: 157534 [1]
Approved by: re (kib)
MFC after: 2 weeks
- Sprinkle some const where appropriate.
- Consistently use target_id_t for the target parameter of mpt_map_physdisk()
and mpt_is_raid_volume().
- Fix some whitespace bugs.
Approved by: re (kib)
The mpt driver previously didn't report a 'maxio' size to CAM, and so the
da(4) driver limited I/O sizes to DFLTPHYS (64K) by default. The number
of scatter gather segments allowed, as reported to busdma, was
(128K / PAGE_SIZE) + 1, or 33 on architectures with 4K pages.
Change things around so that we wait until we've determined how many
segments the adapter can support before creating the busdma tag used for
buffers, so we can potentially support more S/G segments and therefore
larger I/O sizes.
Also, fix some things that were broken about the module unload path. It
still gets hung up inside CAM, though.
mpt.c: Move some busdma initialization calls in here, and call
them just after we've gotten the IOCFacts, and know how
many S/G segments this adapter can support.
mpt.h: Get rid of MPT_MAXPHYS, it is no longer used.
Add max_cam_seg_cnt, which is used to report our maximum
I/O size up to CAM.
mpt_cam.c: Use max_cam_seg_cnt to report our maximum I/O size to CAM.
Fix the locking in mpt_cam_detach().
mpt_pci.c: Pull some busdma initialization and teardown out and put
it in mpt.c. We now delay it until we know many scatter
gather segments the adapter can support, and therefore
how to setup our busdma tags.
mpt_raid.c: Make sure we wake up the right wait channel to get the
raid thread to wake up when we're trying to shut it down.
Reviewed by: gibbs, mjacob
MFC after: 2 weeks
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
the race where interrupt thread can complete the request for which
timeout has fired and while mpt_timeout has blocked on mpt_lock.
Do a best effort to keep 4.x ang Giant-locked configurartions
compiling still.
Reported by: ups
Reviewed by: scottl
thread. Multiple RAID events in quick succession can cause an additional
bus rescan to be scheduled before an earlier scan has completed. In this
case the driver was attempting to use the same CCB storage for two requests.
PR: kern/130330
Reviewed by: Riccardo Torrini riccardo.torrini | esaote com
MFC after: 1 week
specifically SPI controllers now also work in big-endian
machines and some conversions relevant for FC and SAS
controllers as well as support for ILP32 machines which all
were omitted in previous attempts are now also implemented.
The IOCTL-interface is intentionally left (and where needed
actually changed) to be completely little-endian as otherwise
we would have to add conversion code for every possible
configuration page to mpt(4), which didn't seem the right
thing to do, neither did converting only half of the user-
interface to the native byte order.
This change was tested on amd64 (SAS+SPI), i386 (SAS) and
sparc64 (SAS+SPI). Due to lack of the necessary hardware
the target mode code is still left to be made endian-clean.
Reviewed by: scottl
MFC after: 1 month
kthread of the mpt(4) driver that hangs around for the entire lifetime of
the thread. Previously the driver would allocate a new CCB using M_WAITOK
with a lock held each time it updated its state. While here, use the
CAM API for allocating a CCB rather than raw malloc(9).
Reviewed by: scottl
MFC after: 1 week
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
Fix things to use the LSI-Logic Fusion Library mask and shift names for
offset and sync, no matter how awkward they are, in preference to just
plain numbers.
the passed target id is one of the RAID VolumeID. This result
is used to decide whether to try and do actual SPI negotiations
on the real side of the raid/passthru bus pair. The reason we
check this is that we can have both RAID volumes and real devices
on the same bus.
lost one set to a peninsula power failure last night. After
this, I can see both submembers and the raid volumes again,
but speed negotiation is still broken.
Add a mpt_raid_free_mem function to centralize the resource
reclaim and fixed a small memory leak.
Remove restriction on number of targets for systems with IM enabled-
you can have setups that have both IM volumes as well as other devices.
Fix target id selection for passthru and nonpastrhu cases.
Move complete command dumpt to MPT_PRT_DEBUG1 level so that just
setting debug level gets mostly informative albeit less verbose
dumping.
+ Add boatloads of KASSERTs and *really* check out more locking
issues (to catch recursions when we actually go to real locking
in CAM soon). The KASSERTs also caught lots of other issues like
using commands that were put back on free lists, etc.
+ Target mode: role setting is derived directly from port capabilities.
There is no need to set a role any more. Some target mode resources
are allocated early on (ELS), but target command buffer allocation
is deferred until the first lun enable.
+ Fix some breakages I introduced with target mode in that some commands
are *repeating* commands. That is, the reply shows up but the command
isn't really done (we don't free it). We still need to take it off the
pending list because when we resubmit it, bad things then happen.
+ Fix more of the way that timed out commands and bus reset is done. The
actual TMF response code was being ignored.
+ For SPI, honor BIOS settings. This doesn't quite fix the problems we've
seen where we can't seem to (re)negotiate U320 on all drives but avoids
it instead by letting us honor the BIOS settings. I'm sure this is not
quite right and will have to change again soon.
A) Fibre Channel Target Mode support mostly works
(SAS/SPI won't be too far behind). I'd say that
this probably works just about as well as isp(4)
does right now. Still, it and isp(4) and the whole
target mode stack need a bit of tightening.
B) The startup sequence has been changed so that
after all attaches are done, a set of enable functions
are called. The idea here is that the attaches do
whatever needs to be done *prior* to a port being
enabled and the enables do what need to be done for
enabling stuff for a port after it's been enabled.
This means that we also have events handled by their
proper handlers as we start up.
C) Conditional code that means that this driver goes
back all the way to RELENG_4 in terms of support.
D) Quite a lot of little nitty bug fixes- some discovered
by doing RELENG_4 support. We've been living under Giant
*waaaayyyyy* too long and it's made some of us (me) sloppy.
E) Some shutdown hook stuff that makes sure we don't blow
up during a reboot (like by the arrival of a new command
from an initiator).
There's been some testing and LINT checking, but not as
complete as would be liked. Regression testing with Fusion
RAID instances has not been possible. Caveat Emptor.
Sponsored by: LSI-Logic.
of volumes that might need administrator attention through device
specific sysctl to simplify device monitoring.
Submitted by: Deomid Ryabkov <myself at rojer dot pp dot ru>
holders. The license that was approved for my changes to this driver
originally came from LSI, but the changes to the driver core are not
owned by LSI.
MFC: 1 day
o Add timeout error recovery (from a thread context to avoid
the deferral of other critical interrupts).
o Properly recover commands across controller reset events.
o Update the driver to handle events and status codes that
have been added to the MPI spec since the driver was
originally written.
o Make the driver more modular to improve maintainability and
support dynamic "personality" registration (e.g. SCSI Initiator,
RAID, SAS, FC, etc).
o Shorten and simplify the common I/O path to improve driver
performance.
o Add RAID volume and RAID member state/settings reporting.
o Add periodic volume resynchronization status reporting.
o Add support for sysctl tunable resync rate, member write cache
enable, and volume transaction queue depth.
Sponsored by
----------------
Avid Technologies Inc:
SCSI error recovery, driver re-organization, update of MPI library
headers, portions of dynamic personality registration, and misc bug
fixes.
Wheel Open Technologies:
RAID event notification, RAID member pass-thru support, firmware
upload/download support, enhanced RAID resync speed, portions
of dynamic personality registration, and misc bug fixes.
Detailed Changes
================
mpt.c mpt_cam.c mpt_raid.c mpt_pci.c:
o Add support for personality modules. Each module exports
load, and unload module scope methods as well as probe, attach,
event, reset, shutdown, and detach per-device instance
methods
mpt.c mpt.h mpt_pci.c:
o The driver now associates a callback function (via an
index) with every transaction submitted to the controller.
This allows the main interrupt handler to absolve itself
of any knowledge of individual transaction/response types
by simply calling the callback function "registered" for
the transaction. We use a callback index instead of a
callback function pointer in each requests so we can
properly handle responses (e.g. event notifications)
that are not associated with a transaction. Personality
modules dynamically register their callbacks with the
driver core to receive the callback index to use for their
handlers.
o Move the interrupt handler into mpt.c. The ISR algorithm
is bus transport and OS independent and thus had no reason
to be in mpt_pci.c.
o Simplify configuration message reply handling by copying
reply frame data for the requester and storing completion
status in the original request structure.
o Add the mpt_complete_request_chain() helper method and use
it to implement reset handlers that must abort transactions.
o Keep track of all pending requests on the new
requests_pending_list in the softc.
o Add default handlers to mpt.c to handle generic event
notifications and controller reset activities. The event
handler code is largely the same as in the original driver.
The reset handler is new and terminates any pending transactions
with a status code indicating the controller needs to be
re-initialized.
o Add some endian support to the driver. A complete audit is
still required for this driver to have any hope of operating
in a big-endian environment.
o Use inttypes.h and __inline. Come closer to being style(9)
compliant.
o Remove extraneous use of typedefs.
o Convert request state from a strict enumeration to a series
of flags. This allows us to, for example, tag transactions
that have timed-out while retaining the state that the
transaction is still in-flight on the controller.
o Add mpt_wait_req() which allows a caller to poll or sleep
for the completion of a request. Use this to simplify
and factor code out from many initialization routines.
We also use this to sleep for task management request
completions in our CAM timeout handler.
mpt.c:
o Correct a bug in the event handler where request structures were
freed even if the request reply was marked as a continuation
reply. Continuation replies indicate that the controller still owns
the request and freeing these replies prematurely corrupted
controller state.
o Implement firmware upload and download. On controllers that do
not have dedicated NVRAM (as in the Sun v20/v40z), the firmware
image is downloaded to the controller by the system BIOS. This
image occupies precious controller RAM space until the host driver
fetches the image, reducing the number of concurrent I/Os the
controller can processes. The uploaded image is used to
re-program the controller during hard reset events since the
controller cannot fetch the firmware on its own. Implementing this
feature allows much higher queue depths when RAID volumes
are configured.
o Changed configuration page accessors to allow threads to sleep
rather than busy wait for completion.
o Removed hard coded data transfer sizes from configuration page
routines so that RAID configuration page processing is possible.
mpt_reg.h:
o Move controller register definitions into a separate file.
mpt.h:
o Re-arrange includes to allow inlined functions to be
defined in mpt.h.
o Add reply, event, and reset handler definitions.
o Add softc fields for handling timeout and controller
reset recovery.
mpt_cam.c:
o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality,
such as event handling, into mpt.c leaving only CAM SCSI
support here.
o Revamp completion handler to provide correct CAM status for
all currently defined SCSI MPI message result codes.
o Register event and reset handlers with the MPT core. Modify
the event handler to notify CAM of bus reset events. The
controller reset handler will abort any transactions that
have timed out. All other pending CAM transactions are
correctly aborted by the core driver's reset handler.
o Allocate a single request up front to perform task management
operations. This guarantees that we can always perform a
TMF operation even when the controller is saturated with other
operations. The single request also serves as a perfect
mechanism of guaranteeing that only a single TMF is in flight
at a time - something that is required according to the MPT
Fusion documentation.
o Add a helper function for issuing task management requests
to the controller. This is used to abort individual requests
or perform a bus reset.
o Modify the CAM XPT_BUS_RESET ccb handler to wait for and
properly handle the status of the bus reset task management
frame used to reset the bus. The previous code assumed that
the reset request would always succeed.
o Add timeout recovery support. When a timeout occurs, the
timed-out request is added to a queue to be processed by
our recovery thread and the thread is woken up. The recovery
thread processes timed-out command serially, attempting first
to abort them and then falling back to a bus reset if an
abort fails.
o Add calls to mpt_reset() to reset the controller if any
handshake command, bus reset attempt or abort attempt
fails due to a timeout.
o Export a secondary "bus" to CAM that exposes all volume drive
members as pass-thru devices, allowing CAM to perform proper
speed negotiation to hidden devices.
o Add a CAM async event handler tracking the AC_FOUND_DEVICE event.
Use this to trigger calls to set the per-volume queue depth once
the volume is fully registered with CAM. This is required to avoid
hitting firmware limits on volume queue depth. Exceeding the
limit causes the firmware to hang.
mpt_cam.h:
o Add several helper functions for interfacing to CAM and
performing timeout recovery.
mpt_pci.c:
o Disable interrupts on the controller before registering and
enabling interrupt delivery to the OS. Otherwise we risk
receiving interrupts before the driver is ready to receive
them.
o Make use of compatibility macros that allow the driver to
be compiled under 4.x and 5.x.
mpt_raid.c:
o Add a per-controller instance RAID thread to perform settings
changes and query status (minimizes CPU busy wait loops).
o Use a shutdown handler to disable "Member Write Cache Enable"
(MWCE) setting for RAID arrays set to enable MWCE During Rebuild.
o Change reply handler function signature to allow handlers to defer
the deletion of reply frames. Use this to allow the event reply
handler to queue up events that need to be acked if no resources
are available to immediately ack an event. Queued events are
processed in mpt_free_request() where resources are freed. This
avoids a panic on resource shortage.
o Parse and print out RAID controller capabilities during driver probe.
o Define, allocate, and maintain RAID data structures for volumes,
hidden member physical disks and spare disks.
o Add dynamic sysctls for per-instance setting of the log level, array
resync rate, array member cache enable, and volume queue depth.
mpt_debug.c:
o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on
a particular log level to aid in tracking down driver issues.
o Add mpt_decode_value() which parses the bits in an integer
value based on a parsing table (mask, value, name string, tuples).
mpilib/*:
o Update mpi library header files to latest distribution from LSI.
Submitted by: gibbs
Approved by: re
