This may not be a generally valid configuration, but neither is relying
on the PCI clock to be stable.
The only currently known and supported hardware is the VPN14x1 from
Soekris, and since it has external clock, we fail safe(r) by using
it.
Unfortunately there is no way to probe this reliably.
Retire g_sanity() and corresponding debugflag (0x8)
Retire g_{stall,release}_events().
Under #ifdef DIAGNOSTIC:
Make g_valid_obj() an official function and have it return an an
non-zero integer which indicates the kind of object when found.
Implement G_VALID_{CLASS,GEOM,CONSUMER,PROVIDER}() macros based
on g_valid_obj().
Sprinkle calls to these macros liberally over the infrastructure.
Always check that we do not free a live object.
that I added recently:
- When a periodic timer fires, it's automatically re-armed. We must
make sure to re-arm the timer _before_ invoking any caller-supplied
defered procedure call: the DPC may choose to call KeCancelTimer(),
and re-arming the timer after the DPC un-does the effect of the
cancel.
- Fix similar issue with periodic timers in subr_ndis.c.
- When calling KeSetTimer() or KeSetTimerEx(), if the timer is
already pending, untimeout() it first before timeout()ing
it again.
- The old Atheros driver for the 5211 seems to use KeSetTimerEx()
incorrectly, or at the very least in a very strange way that
doesn't quite follow the Microsoft documentation. In one case,
it calls KeSetTimerEx() with a duetime of 0 and a period of 5000.
The Microsoft documentation says that negative duetime values
are relative to the current time and positive values are absolute.
But it doesn't say what's supposed to happen with positive values
that less than the current time, i.e. absolute values that are
in the past.
Lacking any further information, I have decided that timers with
positive duetimes that are in the past should fire right away (or
in our case, after only 1 tick). This also takes care of the other
strange usage in the Atheros driver, where the duetime is
specified as 500000 and the period is 50. I think someone may
have meant to use -500000 and misinterpreted the documentation.
- Also modified KeWaitForSingleObject() and KeWaitForMultipleObjects()
to make the same duetime adjustment, since they have the same rules
regarding timeout values.
- Cosmetic: change name of 'timeout' variable in KeWaitForSingleObject()
and KeWaitForMultipleObjects() to 'duetime' to avoid senseless
(though harmless) overlap with timeout() function name.
With these fixes, I can get the 5211 card to associate properly with
my adhoc net using driver AR5211.SYS version 2.4.1.6.
a static const global variable in ah_core.c. This makes it more clear
that this array does not require synchronization, as well as
synchronizing the layout to the ESP algorithm list. This is the
version of my patch that Itojun committed to the KAME tree.
Obtained from: me, via KAME
pmap. For the kernel pmap, Giant is not required. In general, for
other pmaps, Giant is required by i386's pmap_pte() implementation.
Specifically, the use of PMAP2/PADDR2 is synchronized by Giant.
Note: In principle, updates to the kernel pmap's wired count could be
lost without Giant. However, in practice, we never use the kernel
pmap's wired count. This will be resolved when pmap locking appears.
- With the above change, cpu_thread_clean() and uma_large_free() need
not acquire Giant. (The first case is simply the revival of
i386/i386/vm_machdep.c's revision 1.226 by peter.)
- Add encapmtx to protect ip_encap.c global variables (encapsulation
list).
- Unifdef #ifdef 0 pieces of encap_init() which was (and now really
is) basically a no-op.
- Lock encapmtx when walking encaptab, modifying it, comparing
entries, etc.
- Remove spl's.
Note that currently there's no facilite to make sure outstanding
use of encapsulation methods on a table entry have drained bfore
we allow a table entry to be removed. As such, it's currently the
caller's responsibility to make sure that draining takes place.
Reviewed by: mlaier
stf_destroy() to handle the common softc destruction path for the
two destruction sources: interface cloning destroy, and module
unload.
NOTE: sc_ro, the cached route for stf conversion, is not synchronized
against concurrent access in this change, that will follow in a future
change.
Reviewed by: pjd
Push if_faith softc destruction logic into faith_destroy() so that
it can be called after softc list removal in both the clone destroy
and module unload paths.
ndis_probe_pci() doesn't contain an entry for an IRQ resource, try to
force one to be routed to us anyway by adding an extra call to
bus_alloc_resource(). If this fails, then we have to abort the attach.
Patch provided by jhb, tweaked by me.
really sure why we have a softc list for if_loop, given that it
can't be unloaded, but that's an issue to revisit in the future as
corrupting the softc list would still cause panics.
Reviewed by: benno
Since there are two destroy paths for if_disc interfaces --
module unload and cloan interface destroy, create a new utility
function disc_destroy(), which is callded on a softc after it
has been removed from the global softc list; the cloaner and
module unload entry paths will both remove it before calling
disc_destroy().
Reviewed by: pjd
prevented newfs to work on volumes that are larger than 1TB.
PR: 63577
Submitted by: Masaki Takakashi <mtakahashi@se.gtd.cosmo.co.jp>
Approved by: grog (mentor), bde
least common multiple of all disks sector sizes.
This will allow to safely concatenate disks with different sector sizes.
- Mark unused function arguments.
- Other minor cleanups.
in the Memory Mapped Configuration Region (MMCR) to reset the CPU.
If CPU_ELAN is set, try this first to reset the CPU before the
traditional way.
Without this change, my Compulab board powers down on 'reset' instead
of rebooting.
This adds the former ports registered groups: proxy and authpf as well as
the proxy user. Make sure to run mergemaster -p in oder to complete make
installworld without errors.
This also provides the passive OS fingerprints from OpenBSD (pf.os) and an
example pf.conf.
For those who want to go without pf; it provides a NO_PF knob to make.conf.
__FreeBSD_version will be bumped soon to reflect this and to be able to
change ports accordingly.
Approved by: bms(mentor)
- security.bsd.hardlink_check_uid, when set, means, that unprivileged
users are not permitted to create hard links to files not
owned by them,
- security.bsd.hardlink_check_gid, when set, means, that unprivileged
users are not permitted to create hard links to files owned
by group they don't belong to.
OK'ed by: rwatson
ethernet (tested) and FDDI (not tested). The main use for this is on ADSL (or
other ATM) connections where bridged ethernet is used, PPPoE being a prime
example.
There is no manual page as yet, I will write one shortly.
Reviewed by: harti
that we (p1) are currently running, we hold a reference on p_textvp which
means the vnode cannot go away. p2 cannot run yet (and hence cannot exit)
so this should be safe to do at this point. As a bonus, it removes a
block of under-Giant code that was there to support the vref.
ever since alpha/alpha/pmap.c revision 1.81 introduced the list allpmaps,
there has been no reason for having this function on Alpha. Briefly,
when pmap_growkernel() relied upon the list of all processes to find and
update the various pmaps to reflect a growth in the kernel's valid
address space, pmap_init2() served to avoid a race between pmap
initialization and pmap_growkernel(). Specifically, pmap_pinit2() was
responsible for initializing the kernel portions of the pmap and
pmap_pinit2() was called after the process structure contained a pointer
to the new pmap for use by pmap_growkernel(). Thus, an update to the
kernel's address space might be applied to the new pmap unnecessarily,
but an update would never be lost.
