This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations
As DragonflyBSD, a load balance group is limited to 256 pcbs
(256 programs or threads sharing the same socket).
Submitted by: Johannes Lundberg <johanlun0@gmail.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
It is the forerunner/foundational work of bringing in both Rack and BBR
which use hpts for pacing out packets. The feature is optional and requires
the TCPHPTS option to be enabled before the feature will be active. TCP
modules that use it must assure that the base component is compile in
the kernel in which they are loaded.
MFC after: Never
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D15020
Export additional information which may be helpful to userspace
consumers and rename the sysctl to net.inet.tcp.function_info.
Sponsored by: Netflix, Inc.
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
controlled by the TCP_BLACKBOX option.
Enable this as part of amd64 GENERIC. For now, leave it disabled on
other platforms.
Sponsored by: Netflix, Inc.
summits at BSDCan and BSDCam in 2017.
The TCP Blackbox Recorder allows you to capture events on a TCP connection
in a ring buffer. It stores metadata with the event. It optionally stores
the TCP header associated with an event (if the event is associated with a
packet) and also optionally stores information on the sockets.
It supports setting a log ID on a TCP connection and using this to correlate
multiple connections that share a common log ID.
You can log connections in different modes. If you are doing a coordinated
test with a particular connection, you may tell the system to put it in
mode 4 (continuous dump). Or, if you just want to monitor for errors, you
can put it in mode 1 (ring buffer) and dump all the ring buffers associated
with the connection ID when we receive an error signal for that connection
ID. You can set a default mode that will be applied to a particular ratio
of incoming connections. You can also manually set a mode using a socket
option.
This commit includes only basic probes. rrs@ has added quite an abundance
of probes in his TCP development work. He plans to commit those soon.
There are user-space programs which we plan to commit as ports. These read
the data from the log device and output pcapng files, and then let you
analyze the data (and metadata) in the pcapng files.
Reviewed by: gnn (previous version)
Obtained from: Netflix, Inc.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D11085
The conditional compilation support is now centralized in
tcp_fastopen.h and tcp_var.h. This doesn't provide the minimum
theoretical code/data footprint when TCP_RFC7413 is disabled, but
nearly all the TFO code should wind up being removed by the optimizer,
the additional footprint in the syncache entries is a single pointer,
and the additional overhead in the tcpcb is at the end of the
structure.
This enables the TCP_RFC7413 kernel option by default in amd64 and
arm64 GENERIC.
Reviewed by: hiren
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14048
[RFC7413]. It also includes a pre-shared key mode of operation in
which the server requires the client to be in possession of a shared
secret in order to successfully open TFO connections with that server.
The names of some existing fastopen sysctls have changed (e.g.,
net.inet.tcp.fastopen.enabled -> net.inet.tcp.fastopen.server_enable).
Reviewed by: tuexen
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14047
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
o Separate fields of struct socket that belong to listening from
fields that belong to normal dataflow, and unionize them. This
shrinks the structure a bit.
- Take out selinfo's from the socket buffers into the socket. The
first reason is to support braindamaged scenario when a socket is
added to kevent(2) and then listen(2) is cast on it. The second
reason is that there is future plan to make socket buffers pluggable,
so that for a dataflow socket a socket buffer can be changed, and
in this case we also want to keep same selinfos through the lifetime
of a socket.
- Remove struct struct so_accf. Since now listening stuff no longer
affects struct socket size, just move its fields into listening part
of the union.
- Provide sol_upcall field and enforce that so_upcall_set() may be called
only on a dataflow socket, which has buffers, and for listening sockets
provide solisten_upcall_set().
o Remove ACCEPT_LOCK() global.
- Add a mutex to socket, to be used instead of socket buffer lock to lock
fields of struct socket that don't belong to a socket buffer.
- Allow to acquire two socket locks, but the first one must belong to a
listening socket.
- Make soref()/sorele() to use atomic(9). This allows in some situations
to do soref() without owning socket lock. There is place for improvement
here, it is possible to make sorele() also to lock optionally.
- Most protocols aren't touched by this change, except UNIX local sockets.
See below for more information.
o Reduce copy-and-paste in kernel modules that accept connections from
listening sockets: provide function solisten_dequeue(), and use it in
the following modules: ctl(4), iscsi(4), ng_btsocket(4), ng_ksocket(4),
infiniband, rpc.
o UNIX local sockets.
- Removal of ACCEPT_LOCK() global uncovered several races in the UNIX
local sockets. Most races exist around spawning a new socket, when we
are connecting to a local listening socket. To cover them, we need to
hold locks on both PCBs when spawning a third one. This means holding
them across sonewconn(). This creates a LOR between pcb locks and
unp_list_lock.
- To fix the new LOR, abandon the global unp_list_lock in favor of global
unp_link_lock. Indeed, separating these two locks didn't provide us any
extra parralelism in the UNIX sockets.
- Now call into uipc_attach() may happen with unp_link_lock hold if, we
are accepting, or without unp_link_lock in case if we are just creating
a socket.
- Another problem in UNIX sockets is that uipc_close() basicly did nothing
for a listening socket. The vnode remained opened for connections. This
is fixed by removing vnode in uipc_close(). Maybe the right way would be
to do it for all sockets (not only listening), simply move the vnode
teardown from uipc_detach() to uipc_close()?
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D9770
stack modules.
It adds support for mangling symbols exported by a module by prepending
a string to them. (This avoids overlapping symbols in the kernel linker.)
It allows the use of a macro as the module name in the DECLARE_MACRO()
and MACRO_VERSION() macros.
It allows the code to register stack aliases (e.g. both a generic name
["default"] and version-specific name ["default_10_3p1"]).
With these changes, it is trivial to compile TCP stack modules with
the name defined in the Makefile and to load multiple versions of the
same stack simultaneously. This functionality can be used to enable
side-by-side testing of an old and new version of the same TCP stack.
It also could support upgrading the TCP stack without a reboot.
Reviewed by: gnn, sjg (makefiles only)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D11086
The ICMP6 packets might not be contained in a single mbuf. So don't
assume this. Keep the IPv4 and IPv6 code in sync and make explicit
that the syncache code only need the TCP sequence number, not the
complete TCP header.
MFC after: 3 days
Sponsored by: Netflix, Inc.
function (they used to say UMA_ZONE_NOFREE), so flag parameter goes away.
The zone_fini parameter also goes away. Previously no protocols (except
divert) supplied zone_fini function, so inpcb locks were leaked with slabs.
This was okay while zones were allocated with UMA_ZONE_NOFREE flag, but now
this is a leak. Fix that by suppling inpcb_fini() function as fini method
for all inpcb zones.
This is a painful change, but it is needed. On the one hand, we avoid
modifying them, and this slows down some ideas, on the other hand we still
eventually modify them and tools like netstat(1) never work on next version of
FreeBSD. We maintain a ton of spares in them, and we already got some ifdef
hell at the end of tcpcb.
Details:
- Hide struct inpcb, struct tcpcb under _KERNEL || _WANT_FOO.
- Make struct xinpcb, struct xtcpcb pure API structures, not including
kernel structures inpcb and tcpcb inside. Export into these structures
the fields from inpcb and tcpcb that are known to be used, and put there
a ton of spare space.
- Make kernel and userland utilities compilable after these changes.
- Bump __FreeBSD_version.
Reviewed by: rrs, gnn
Differential Revision: D10018
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Small summary
-------------
o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.
Reviewed by: gnn, wblock
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352
not being initialized, and the per-vnet fastopen context was only
being initialized for the default vnet.
PR: 216613
Reported by: Alex Deiter <alex dot deiter at gmail dot com>
MFC after: 1 week
dangerous. Those wanting data from an mbuf should use DTrace itself to get
the data.
PR: 203409
Reviewed by: hiren
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D9035
This does not cover state changes from TIME-WAIT.
Reviewed by: gnn
MFC after: 3 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8443
handling. Ensure that:
* Protocol unreachable errors are handled by indicating ECONNREFUSED
to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Communication prohibited errors are handled by indicating ECONNREFUSED
to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Hop Limited exceeded errors are handled by indicating EHOSTUNREACH
to the TCP user for both IPv4 and IPv6.
For IPv6 the TCP connected was dropped but errno wasn't set.
Reviewed by: gallatin, rrs
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: 7904
compile when that option is configured. In tcp_destroy(), the error
variable is now only used in code enclosed in an '#ifdef TCP_HHOOK' block.
This broke the build for VNET images.
Enclose the error variable itself in an #ifdef block.
Submitted by: Shawn Webb <shawn.webb at hardenedbsd.org>
Reported by: Shawn Webb <shawn.webb at hardenedbsd.org>
PointyHat to: jtl
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.
Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.
This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.
Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.
Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8185
alternate TCP stack in other then the closed state (pre-listen/connect).
The idea is that *if* that is supported by the alternate stack, it
is asked if its ok to switch. If it approves the "handoff" then we
allow the switch to happen. Also the fini() function now gets a flag
to tell if you are switching away *or* the tcb is destroyed. The
init() call into the alternate stack is moved to the end so the
tcb is more fully formed before the init transpires.
Sponsored by: Netflix Inc.
Differential Revision: D6790
- Re-write tcp_ctlinput6() to closely mimic the IPv4 tcp_ctlinput()
- Now that tcp_ctlinput6() updates t_maxseg, we can allow ip6_output()
to send TCP packets without looking at the tcp host cache for every
single transmit.
- Make the icmp6 code mimic the IPv4 code & avoid returning
PRC_HOSTDEAD because it is so expensive.
Without these changes in place, every TCP6 pmtu discovery or host
unreachable ICMP resulted in a call to in6_pcbnotify() which walks the
tcbinfo table with the write lock held. Because the tcbinfo table is
shared between IPv4 and IPv6, this causes huge scalabilty issues on
servers with lots of (~100K) TCP connections, to the point where even
a small percent of IPv6 traffic had a disproportionate impact on
overall throughput.
Reviewed by: bz, rrs, ae (all earlier versions), lstewart (in Netflix's tree)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D7272
calling in_pcbnotifyall().
This avoids lock contention on tcbinfo due to in_pcbnotifyall()
holding the tcbinfo write lock while walking all connections.
Reviewed by: rrs, karels
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D7251
debugging TCP connections. This commit provides a mechanism to free those
mbufs when the system is under memory pressure.
Because this will result in lost debugging information, the behavior is
controllable by a sysctl. The default setting is to free the mbufs.
Reviewed by: gnn
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D6931
Input from: novice_techie.com
That way timers can finish cleanly and we do not gamble with a DELAY().
Reviewed by: gnn, jtl
Approved by: re (gjb)
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6923
specific order. VNET_SYSUNINITs however are doing exactly that.
Thus remove the VIMAGE conditional field from the domain(9) protosw
structure and replace it with VNET_SYSUNINITs.
This also allows us to change some order and to make the teardown functions
file local static.
Also convert divert(4) as it uses the same mechanism ip(4) and ip6(4) use
internally.
Slightly reshuffle the SI_SUB_* fields in kernel.h and add a new ones, e.g.,
for pfil consumers (firewalls), partially for this commit and for others
to come.
Reviewed by: gnn, tuexen (sctp), jhb (kernel.h)
Obtained from: projects/vnet
MFC after: 2 weeks
X-MFC: do not remove pr_destroy
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6652
Not all mbufs passed up from device drivers are M_WRITABLE(). In
particular, the Chelsio T4/T5 driver uses a feature called "buffer packing"
to receive multiple frames in a single receive buffer. The mbufs for
these frames all share the same external storage so are treated as
read-only by the rest of the stack when multiple frames are in flight.
Previously tcp_respond() would blindly overwrite read-only mbufs when
INVARIANTS was disabled or panic with an assertion failure if INVARIANTS
was enabled. Note that the new case is a bit of a mix of the two other
cases in tcp_respond(). The TCP and IP headers must be copied explicitly
into the new mbuf instead of being inherited (similar to the m == NULL
case), but the addresses and ports must be swapped in the reply (similar
to the m != NULL case).
Reviewed by: glebius
async_drain functionality. This as been tested in NF as well as
by Verisign. Still to do in here is to remove all the old flags. They
are currently left being maintained but probably are no longer needed.
Sponsored by: Netflix Inc.
Differential Revision: http://reviews.freebsd.org/D5924
It looks like as with the safety belt of DELAY() fastened (*) we can
completely tear down and free all memory for TCP (after r281599).
(*) in theory a few ticks should be good enough to make sure the timers
are all really gone. Could we use a better matric here and check a
tcbcb count as an optimization?
PR: 164763
Reviewed by: gnn, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5734
The tcp_inpcb (pcbinfo) zone should be safe to destroy.
PR: 164763
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5732
We attach the "counter" to the tcpcbs. Thus don't free the
TCP Fastopen zone before the tcpcbs are gone, as otherwise
the zone won't be empty.
With that it should be safe to destroy the "tfo" zone without
leaking the memory.
PR: 164763
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5731
- properly V_irtualise variable access unbreaking VIMAGE kernels.
- remove the volatile from the function return type to make architecture
using gcc happy [-Wreturn-type]
"type qualifiers ignored on function return type"
I am not entirely happy with this solution putting the u_int there
but it will do for now.
route caching for TCP, with some improvements. In particular, invalidate
the route cache if a new route is added, which might be a better match.
The cache is automatically invalidated if the old route is deleted.
Submitted by: Mike Karels
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D4306
struct tcpstat, because the structure can be zeroed out by netstat(1) -z,
and of course running connection counts shouldn't be touched.
Place running connection counts into separate array, and provide
separate read-only sysctl oid for it.
stack is not compliant with RFC 7323, which requires that TCP stacks send
a timestamp option on all packets (except, optionally, RSTs) after the
session is established.
This patch adds that support. It also adds a TCP signature option to the
packet, if appropriate.
PR: 206047
Differential Revision: https://reviews.freebsd.org/D4808
Reviewed by: hiren
MFC after: 2 weeks
Sponsored by: Juniper Networks
- Reorder variables by size
- Move initializer closer to where it is used
- Remove unneeded variable
Differential Revision: https://reviews.freebsd.org/D4808
Reviewed by: hiren
MFC after: 2 weeks
Sponsored by: Juniper Networks
for output and drop; connect didn't always fire a user probe
some probes were missing in fastpath
Submitted by: Hannes Mehnert
Sponsored by: REMS, EPSRC
Differential Revision: https://reviews.freebsd.org/D5525
included in loader.conf. It also fixes it so that no matter if some one incorrectly
specifies a load order, the lists and such will be initialized on demand at that
time so no one can make that mistake.
Reviewed by: hiren
Differential Revision: D5189
