Commit Graph

31 Commits

Author SHA1 Message Date
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
Kip Macy
279aa3d419 Change if_output to take a struct route as its fourth argument in order
to allow passing a cached struct llentry * down to L2

Reviewed by:	rwatson
2009-04-16 20:30:28 +00:00
Warner Losh
b23193a559 Fix iicbus_intr, iicbus_write and device_read_ivar prototypes... 2009-02-10 22:50:23 +00:00
Nathan Whitehorn
789c4b9d08 Change the way I2C bus attachment works to allow firmware-assisted bus
subclasses as are available with PCI. Changes I2C device drivers without
real probe logic to return BUS_PROBE_NOWILDWARD to avoid interference with
firmware bus enumeration, and reduces the probe priority of the iicbus
base driver to allow subclass attachment at higher priority.

Discussed on:	freebsd-arch
2009-01-06 17:23:37 +00:00
John Baldwin
225f9723dc Lock the consumers of the iicbus(4) infrastructure:
- ad7418(4) uses an sx lock instead of a mtx since the iicbus(4) stuff it
  calls can sleep (request_bus()).  Also, I expanded the locking slightly
  to serialize writes to data stored in the softc.
- Similarly, the icee(4) driver now uses an sx lock instead of a mutex.
  I also removed the pointless OPENED flag and flags field from the softc.
- The locking for the ic(4) driver was a bit trickier:
  - Add a mutex to the softc to protect softc data.
  - The driver uses malloc'd buffers that are the size of the interface
    MTU to send and receive packets.  Previously, these were allocated
    every time the interface was brought up and anytime the MTU was
    changed, with various races that could result in memory leaks.  I
    changed this to be a bit simpler and more like other NIC drivers in
    that we allocate buffers during attach for the default MTU size and
    only reallocate them on MTU changes.  The reallocation procedure
    goes to some lengths with various flags to not replace either the
    the receive or transmit buffers while the driver is busy receiving
    or transmitting a packet.
  - Store the device_t of the driver in the softc instead of detours into
    new-bus using if_dunit from the ifnet and an even more bizarre detour
    to get the softc instead of using if_softc.
  - Drop the driver mutex when invoking netisr_dispatch() to pass the
    packet up to IP.
  - Use if_printf().
2008-08-04 21:14:24 +00:00
Warner Losh
2c3538b83a Minor style(9) treatment to make things a little more consistant
within iicbus code.
2006-08-21 17:32:50 +00:00
Warner Losh
522bc71e0a Turn a file that was mostly style(9) compliant to a file that's really close
to being completely style(9).  The odd-ball indentation in a few places was
really distracting.
2006-04-04 19:30:47 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
David Malone
01399f34a5 Fix some long standing bugs in writing to the BPF device attached to
a DLT_NULL interface. In particular:

        1) Consistently use type u_int32_t for the header of a
           DLT_NULL device - it continues to represent the address
           family as always.
        2) In the DLT_NULL case get bpf_movein to store the u_int32_t
           in a sockaddr rather than in the mbuf, to be consistent
           with all the DLT types.
        3) Consequently fix a bug in bpf_movein/bpfwrite which
           only permitted packets up to 4 bytes less than the MTU
           to be written.
        4) Fix all DLT_NULL devices to have the code required to
           allow writing to their bpf devices.
        5) Move the code to allow writing to if_lo from if_simloop
           to looutput, because it only applies to DLT_NULL devices
           but was being applied to other devices that use if_simloop
           possibly incorrectly.

PR:		82157
Submitted by:	Matthew Luckie <mjl@luckie.org.nz>
Approved by:	re (scottl)
2005-06-26 18:11:11 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Robert Watson
9c7d53aa85 Since if_ic doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
2004-08-13 23:16:44 +00:00
Sam Leffler
437ffe1823 o eliminate widespread on-stack mbuf use for bpf by introducing
a new bpf_mtap2 routine that does the right thing for an mbuf
  and a variable-length chunk of data that should be prepended.
o while we're sweeping the drivers, use u_int32_t uniformly when
  when prepending the address family (several places were assuming
  sizeof(int) was 4)
o return M_ASSERTVALID to BPF_MTAP* now that all stack-allocated
  mbufs have been eliminated; this may better be moved to the bpf
  routines

Reviewed by:	arch@ and several others
2003-12-28 03:56:00 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Poul-Henning Kamp
4d8d520f17 Fix misindentation.
Spotted by:	FlexeLint
2002-10-16 08:45:34 +00:00
Nicolas Souchu
c17d43407f Major rework of the iicbus/smbus framework:
- VIA chipset SMBus controllers added
	- alpm driver updated
	- Support for dynamic modules added
	- bktr FreeBSD smbus updated but not tested
	- cleanup
2002-03-23 15:49:15 +00:00
David E. O'Brien
6e551fb628 Update to C99, s/__FUNCTION__/__func__/,
also don't use ANSI string concatenation.
2001-12-10 08:09:49 +00:00
Jonathan Lemon
df5e198723 Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00
Poul-Henning Kamp
53ce36d17a Remove unneeded #include <sys/proc.h> lines. 2000-10-29 13:57:19 +00:00
Peter Wemm
664a31e496 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 04:46:21 +00:00
Poul-Henning Kamp
46783fb897 Remove NBPF conditionality of bpf calls in most of our network drivers.
This means that we will not have to have a bpf and a non-bpf version
of our driver modules.

This does not open any security hole, because the bpf core isn't loadable

The drivers left unchanged are the "cross platform" drivers where the respective
maintainers are urged to DTRT, whatever that may be.

Add a couple of missing FreeBSD tags.
1999-09-25 12:06:01 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Dag-Erling Smørgrav
6b5ca0d83e Rename bpfilter to bpf. 1999-07-06 19:23:32 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Archie Cobbs
f1d19042b0 The "easy" fixes for compiling the kernel -Wunused: remove unreferenced static
and local variables, goto labels, and functions declared but not defined.
1998-12-07 21:58:50 +00:00
Nicolas Souchu
04f89a63cb iicbb is generic support for I2C bit-banging.
Other files: timeout management added to the I2C framework.
1998-10-31 11:31:07 +00:00
Nicolas Souchu
c3e2dc6b48 Submitted by: nsouch
Philips I2C bus generic support other new bus architecture.
1998-09-03 20:51:50 +00:00