o Lock ed
o Fix extra newline in probe messages
o Eliminate gone.
o Make detach less-racy.
o Eliminate spl*
o Switch from timeout/untimeout to callout interface.
o Read/write card memory using bus_space calls.
o generalize readmem so that we don't need ifs in the code.
o Fix memory stuff to be consistant.
o Remove OLDCARD compat stuff.
o Mark interrupt as MPSAFE.
# sic, hpp not tested at all
# ISA and PCI attachments lightly tested
- On resume all registers have to be initialized again like after
power-on so reset sc_inited in gem_suspend() in order get all of
the registers set next time gem_init_regs() is called.
- On at least some ERI and GEM revisions GEM_MAC_RX_OVERFLOW happen
often due to a silicon bug and re-initializing is all we can do
about these errors so make handling them non-verbose.
- Remove a superfluous memset(3) call in gem_meminit(), all elements
are initialized to 0 anyway.
MFC after: 1 week
tulip_mbuf_compress(). If we fail to allocate a new mbuf to copy the
data into, put the mbuf back in the driver's send queue so that we can
retry it later rather than throwing the packet away.
- Use m_devget() instead of doing it inline ourselves in the
TULIP_COPY_RXDATA case. If we fail to allocate an mbuf to copy the data
into, don't forget about the original mbuf cluster. The old code would
lose the pointer and leak the cluster in that case. Now it doesn't lose
it but always sticks the original rx buffer back into the receive ring
after trying to copy the data out and send it up the stack. Also, if we
fail to allocate a new mbuf to copy the data into, log an input error.
Also, don't combine the priming case with the received-a-packet case to
make the code flow a bit clearer and easier to follow.
not exsist, do not have ioctl return an error, but instead set -1
in the data returned to the user. This allows the HP bios flash
utilities to work without requiring changes to their code.
Reviewed by: jhb
- Remove form feed characters.
- Fixup style of function declarations.
- Assume that an mbuf cluster is big enough to hold an ethernet frame.
(This should really be using m_defrag(), but this diff is just simple
changes for now.)
- Allocate arrays of metadata for the descriptors in the rx and tx rings
and change the ring pointers to walk the metadata array rather than the
actual descriptor rings. Each metadata object contains a pointer to its
descriptor, a pointer to any associated mbuf, and a pointer to the
associated bus_dmamap_t in the bus_dma case. The mbuf pointers replace
the tulip_txq and tulip_rxq local ifqueue's in the softc.
- Add lots of KTR trace entries using a local KTR_TULIP level which
defaults to 0, but can be changed to KTR_DEV at the top of the file
when debugging.
- Rename tulip_init(), tulip_start(), tulip_ifinit(), and tulip_ifstart()
to tulip_init_locked(), tulip_start_locked(), tulip_init(), and
tulip_start(), respectively, to match the convention in other drivers.
- Add a TULIP_SP_MAC() macro to encode two bytes of the MAC address into
the setup buffer and use that in place of lots of BYTE_ORDER #ifdef's.
Also, remove an incorrect XXX comment I added earlier, the driver was
correct (at least it does the same thing dc(4) does). TULIP_SP_MAC
was shamelessly copied from DC_SP_MAC() in dc(4).
- Remove the #ifdef'd NetBSD bus-dma code and replace it with FreeBSD
bus-dma code that not only compiles but even works at runtime.
- Use callout_init_mtx() instead of just callout_init().
- Correct the various wrapper macros for bus_dmamap_sync() for the rx
and tx buffers to only ask for the sync ops that they actually need.
- Tidy the #ifdef TULIP_COPY_RXDATA code by expanding an #ifdef a bit
so it becomes easier to read at the expense of a couple of duplicated
lines of code. Also, use m_getcl() to get an mbuf cluster rather than
MGETHDR() followed by MCLGET().
- Maintain the ring free (ri_free) count for the rx ring metadata since
we no longer have tulip_rxq.ifq_len around to indicate how many mbuf's
are currently in the rx ring.
- Add code to teardown bus_dma resources when attach fails and generally
fixup attach to do a better job of cleaning up when it fails. This
gets us a good bit closer to possibly having a detach method someday
and making this driver an unloadable module.
- Add some functions that can be called from ddb to dump the state of
a descriptor ring and to dump the state of an individual descriptor.
- Various comment grammer and spelling fixes.
I have bus-dma turned on by default, but I've left the non-bus-dma code
around so that it can be turned off to aid in debugging should any problems
turn up later on. I'll be removing the non-bus-dma code in a subsequent
commit.
cooling thread which refers psv, tc1, tc2 and tsp. The previous
code made the period where sc->tz_zone.tsp was zero, and it caused
panic at msleep().
Reported by: keramida
Tested by: keramida
and detach() since mtx_lock() will assert that already since the driver
lock is not recursive.
- Move the call to callout_init_mtx() before hme_stop() so that the
callout_stop() in hme_stop() doesn't operate on an uninitialized callout
structure during attach.
Reported by: yongari (2)
MFC after: 3 days
so that devd can match on it. This field was already available to
usbd and is used by a number of usbd.conf entries, so now it is
possible to transfer those entries to devd.conf.
Submitted by: Anish Mistry
specifies a PMC capability (e.g., sampling) that is not supported
by hardware. Return EINVAL early if the PMC class passed in is
not recognized.
MFC after: 3 days
depends, like all other pccard drivers, indirectly through kobj on
pccard. Therefore, it is not appropriate to force pccard to be loaded
when if_ral.ko is loaded. This makes it possible to load if_ral w/o
loading pccard.ko on, eg, pci only systems.
o management of multiple tx rings (up to 4)
o setting of WME IE in association requests
Some features are still missing though, like the possibility to override
the default cwmin/cwmax/asfn values of each tx queues.
- Add locked versions of start and init. The SRM_MEDIA code in dc_init()
stayed in dc_init() instead of moving to dc_init_locked() to make the
locking saner.
- Use callout_init_mtx().
- Fixup locking in detach and ioctl.
- Lock the driver in the ifmedia callouts.
- Don't recurse on the driver lock.
- De-spl.
MFC after: 3 days
- Add locked variants of start, init, and ifmedia_upd.
- Use callout_* instead of timeout/untimeout.
- Don't recurse on the driver lock.
- Fixup locking in ioctl.
- Lock the driver lock in the ifmedia handlers rather than across
ifmedia_ioctl().
Tested by: brueffer
MFC after: 3 days
interrupt comes in later on, which can happen in some uncommon cases.
Another possible fix is to call re_detach() instead of re_stop(), like
ve(4) does, but I am not sure if the latter is really RTTD, so that stick
with this one-liner for now.
PR: kern/80005
Approved by: silence on -arch, no reply from selected network gurus
- Don't set IFF_ALLMULTI in our ifnet's if_flags if we end up allowing
all multicast due to limits in the MAC receive filters in hardware.
Requested by: rwatson (2)
that if softclock is running on another CPU and is blocked on our driver
lock, we will wait until it has acquired the lock, seen that it was
cancelled, dropped the lock, and awakened us so that we can safely destroy
the mutex.
MFC after: 3 days
effect. since CPU speed is restored by degrees, we cannot use
the facility of saving cpu speed by CPUFREQ_set() effectively.
so, we need to save the value when passive cooling is in effect.
Repoeted by: Kevin Oberman <oberman__at__es.net>
by md(4). Before this change, it was possible to by-pass these flags
by creating memory disks which used a file as a backing store and
writing to the device.
This was discussed by the security team, and although this is problematic,
it was decided that it was not critical as we never guarantee that root will
be restricted.
This change implements the following behavior changes:
-If the user specifies the readonly flag, unset write operations before
opening the file. If the FWRITE mask is unset, the device will be
created with the MD_READONLY mask set. (readonly)
-Add a check in g_md_access which checks to see if the MD_READONLY mask
is set, if so return EROFS
-Do not gracefully downgrade access modes without telling the user. Instead
make the user specify their intentions for the device (assuming the file is
read only). This seems like the more correct way to handle things.
This is a RELENG_6 candidate.
PR: kern/84635
Reviewed by: phk
- Add locked variants of my_start() and my_init().
- Assert that the lock is held in several places rather than recursing.
- Overhaul failure case handling in my_attach() so that it will actually
clean up completely in each of the failure cases.
- Setup the interrupt after ether_ifattach() in my_attach().
- Remove unused callout handle from softc.
- Free the metadata for the descriptors my_in detach() (we leaked it
before).
- Fix locking in my_ioctl().
- Remove spls.
Tested by: brueffer
MFC after: 3 days
which serial device to use in that case respectively to not rely on
the OFW names of the input/output and stdin/stdout devices. Instead
check whether input and output refers to the same device and is of
type serial (uart(4) was already doing this) and for the fallback
to a serial console in case a keyboard is the selected input device
but unplugged do the same for stdin and stdout in case the input
device is nonexistent (PS/2 and USB keyboards) or has a 'keyboard'
property (RS232 keyboards). Additionally also check whether the OFW
did a fallback to a serial console in the same way in case the
output device is nonexistent. While at it save on some variables
and for sys/boot/sparc64/loader/metadata.c move the code in question
to a new function md_bootserial() so it can be kept in sync with
uart_cpu_getdev_console() more easily.
This fixes selecting a serial console and the appropriate device
when using a device path for the 'input-device' and 'output-device'
OFW environment variables instead of an alias for the serial device
to use or when using a screen alias that additionally denotes a
video mode (like e.g. 'screen:r1024x768x60') but no keyboard is
plugged in (amongst others). It also makes the code select a serial
console in case the OFW did the same due to a misconfiguration like
both 'input-device' and 'output-device' set to 'keyboard' or to a
nonexisting device (whether the OFW does a fallback to a serial
console in case of a misconfiguration or one ends up with just no
console at all highly depends on the OBP version however).
- Reduce the size of buffers that only ever need to hold the string
'serial' accordingly. Double the size of buffers that may need to
hold a device path as e.g. '/pci@8,700000/ebus@5/serial@1,400000:a'
exceeds 32 chars.
- Remove the package handle of the '/options' node from the argument
list of uart_cpu_getdev_dbgport() as it's unused there and future
use is also unlikely.
MFC after: 1 week
#if 0.
- Use pci_enable_busmaster() to enable busmastering instead of frobbing
the command register directly.
- Don't check to see if memory or I/O can be enabled by writing to the
command register. The PCI bus driver's bus_alloc_resource() method
already checks this and will fail if it can't enable the bit.
everywhere. This means that my_unit is no longer used as well. The
watchdog routine now also prints 'my0: ...' rather than 'm0x0: ...'.
- Don't bzero the softc and don't try to free it in detach or if attach
fails.
- A whitespace fix.
- Use the driver lock instead of Giant in a bus dma callback.
- Clear IFF_DRV_(RUNNING|OACTIVE) in hme_stop() instead of just clearing
RUNNING in hme_ioctl() to be more like other ethernet drivers.
- Lock the driver lock around mii operations.
- Remove spls.
- Cleanup locking in hme_ioctl().
MFC after: 1 week
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
the timeout routine.
- Fix locking in detach.
- Add locking in shutdown.
- Don't mess with the PCI command register in resume, the PCI bus driver
already does this for us.
- Add locking to the non-serial ifmedia routines.
- Fix locking in ioctl.
- Remove spls and support for 4.x.
MFC after: 1 week
event handler, dev_clone, which accepts a credential argument.
Implementors of the event can ignore it if they're not interested,
and most do. This avoids having multiple event handler types and
fall-back/precedence logic in devfs.
This changes the kernel API for /dev cloning, and may affect third
party packages containg cloning kernel modules.
Requested by: phk
MFC after: 3 days
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
Previously, we used all info (including -1 or "not present") which would
keep the system from reaching 100% when charging.
Reported by: Eric Anderson
MFC after: 2 days
0. This means that we 'succeed' the attach, even after we've freed
the internal data bits. This leads to a panic when you eject the card
with this problem.
Set error = ENXIO in the mac read zeros case.
when using mice containing a tilt movement: there was a missing
usb_callout_init() for the UMS_SPUR_BUT_UP quirk code, and UMS_T
was defined to the same flag value as UMS_SPUR_BUT_UP.
Reported by: flz
MFC after: 3 days
holders. The license that was approved for my changes to this driver
originally came from LSI, but the changes to the driver core are not
owned by LSI.
MFC: 1 day
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.
Problem reported by: Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week
- Conforming to the latest ether_ifattach() change;
- Moving PCCARD_API_LEVEL to the right place.
Reported and Tested by: Vladimir Grebenschikov <vova at fbsd dot ru>
MFC after: 3 days
1. Support wide range sampling rate, as low as 1hz up to int32 max
(which is, insane) through new feeder_rate, multiple precisions
choice (32/64 bit converter). This is indeed, quite insane, but it
does give us more room and flexibility. Plenty sysctl options to
adjust resampling characteristics.
2. Support 24/32 bit pcm format conversion through new, much improved,
simplified and optimized feeder_fmt.
Changes:
1. buffer.c / dsp.c / sound.h
* Support for 24/32 AFMT.
2. feeder_rate.c
* New implementation of sampling rate conversion with 32/64 bit
precision, 1 - int32max hz (which is, ridiculous, yet very
addictive). Much improved / smarter buffer management to not
cause any missing samples at the end of conversion process
* Tunable sysctls for various aspect:
hw.snd.feeder_rate_ratemin - minimum allowable sampling rate
(default to 4000)
hw.snd.feeder_rate_ratemax - maximum allowable sampling rate
(default to 1102500)
hw.snd.feeder_rate_buffersize - conversion buffer size
(default to 8192)
hw.snd.feeder_rate_scaling - scaling / conversion method
(please refer to the source for explaination). Default to
previous implementation type.
3. feeder_fmt.c / sound.h
* New implementation, support for 24/32bit conversion, optimized,
and simplified. Few routines has been removed (8 to xlaw, 16 to
8). It just doesn't make sense.
4. channel.c
* Support for 24/32 AFMT
* Fix wrong xruns increment, causing incorrect underruns statistic
while using vchans.
5. vchan.c
* Support for 24/32 AFMT
* Proper speed / rate detection especially for fixed rate ac97.
User can override it using kernel hint:
hint.pcm.<unit>.vchanrate="xxxx".
Notes / Issues:
* Virtual Channels (vchans)
Enabling vchans can really, really help to solve overrun
issues. This is quite understandable, because it operates
entirely within its own buffering system without relying on
hardware interrupt / state. Even if you don't need vchan,
just enable single channel can help much. Few soundcards
(notably via8233x, sblive, possibly others) have their own
hardware multi channel, and this is unfortunately beyond
vchan reachability.
* The arrival of 24/32 also come with a price. Applications
that can do 24/32bit playback need to be recompiled (notably
mplayer). Use (recompiled) mplayer to experiment / test /
debug this various format using -af format=fmt. Note that
24bit seeking in mplayer is a little bit broken, sometimes
can cause silence or loud static noise. Pausing / seeking
few times can solve this problem.
You don't have to rebuild world entirely for this. Simply
copy /usr/src/sys/sys/soundcard.h to
/usr/include/sys/soundcard.h would suffice. Few drivers also
need recompilation, and this can be done via
/usr/src/sys/modules/sound/.
Support for 24bit hardware playback is beyond the scope of
this changes. That would require spessific hardware driver
changes.
* Don't expect playing 9999999999hz is a wise decision. Be
reasonable. The new feeder_rate implemention provide
flexibility, not insanity. You can easily chew up your CPU
with this kind of mind instability. Please use proper
mosquito repellent device for this obvious cracked brain
attempt. As for testing purposes, you can use (again)
mplayer to generate / play with different sampling rate. Use
something like "mplayer -af resample=192000:0:0 <files>".
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
This mostly to help CT4730, but apparently it does help other
cards too (especially via8233x). This probably need further test
and confirmation from other people with ac97 cards other than via
/ es137x.
* Aggresive dac power wake up call, again, to help CT4730 (and
probably others).
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
- Don't mark MPSAFE (yet).
- DSP_CMD_DMAEXIT_8 doesn't work on old cards, use sb_reset_dsp() instead.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
* Add kernel hint option to disable DXS channels entirely. Report
from several skype users / Pav Lucistnik indicate that disabling
DXS may fix lots of pop / crackling noise. To disable DXS add
hint.pcm.<unit>.via_dxs_disabled="1" to /boot/device.hints.
Further investigation of the issues regarding DXS showed, that
the problem is in another (more generic) place, but until the
right fix is tested/reviewed this may help a little bit.
Added sysctl's to aid testing/debugging:
hint.pcm.<unit>.via_dxs_disabled=X - Disable / Enable DXS channels entirely
hint.pcm.<unit>.via_dxs_channels=X - Limit DXS channels up to X
hint.pcm.<unit>.via_sgd_channels=X - Limit SGD channels up to X
hint.pcm.<unit>.via_dxs_src=X - Enable / Disable DXS sample rate
converter.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
especially for CT4730 / EV1938 chip, causing misconfigured mixer
(David Xu), crippled after power cycle (Kevin Oberman). Fixed.
* Incorporate locking/spdif patches from Jon Noack / matk. Not all
es137x can really do spdif, clean it up a bit to only let few capable
chip. This adds a "hw.snd.pcm<unit>.spdif_enabled" sysctl until
a more generic way of handling this from userland (by an ordinary
user) is designed/implemented.
* Convert all bus_space_(read|write) to use es_rd/es_wr, simmilar
with other drivers.
* Add tunable hw.snd.pcm<unit>.latency_timer sysctl to toggle pci
latency timer value on the fly. Much noise / pop / crackling
issues can be solved by increasing its value. Other people have
pointed out to use pciconf instead, but this is just an added
value specific for CT4730/EV1938.
* Remove es137x specific debug sysctl/code.
Several PRs can now be closed.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Submitted by: Jon Noack <noackjr@alumni.rice.edu> (implicit)
Submitted by: matk (implicit)
PR: 59349, 68594, 73498
Tested by: multimedia@
in the resource error in ep_alloc case. This results in a panic.
Zero resources to make it safe to call twice pending resolution of
layering questions.
MFC After: 3 days
mlx devices. This fixes an issue where mlx device drives fail to be
detected at system boot.
This is a RELENG_6 candidate.
Submitted by: oliver
PR: kern/84163
was not compiled with 'options HWPMC_HOOKS' or if the compiled-in
version numbers of the kernel and module are out of sync.
Reported by: cracauer
MFC after: 3 days
later sum capacities for all batteries, even those that weren't actually
present. We only need to do this for _BST but do it for all of them.
Reported by: Eric Anderson
MFC after: 1 day
are called outside of AN_LOCK()/AN_UNLOCK. This fixes the following
WITNESS warning (produced when an(4) PCMCIA card is detached).
taskqueue_drain with the following non-sleepable locks held:
exclusive sleep mutex an0 (network driver) r = 0 (0xc59af168) locked @ /usr/src/sys/dev/an/if_an.c:2836
MFC after: 3 days
Silence from: current@
- Add locking to protect the softc and mark this driver as MP safe. There
are still some edge cases with multiport cards that need more locking
work.
MFC after: 1 week
Tested on: alpha
descriptors that are still marked owned in #ifdef GEM_RINT_TIMEOUT
instead of #if 0 for convenience.
- Remove stale code and comment about relying on the preset XIF config.
- In case of a watchdog timeout call the init function instead of just
the start function so the chip is properly reset.
Merge from hme(4):
- Convert to use bus_dmamap_load_mbuf_sg() for loading RX buffers.
- Protect from a duplicate mbuf free panic in case the DMA engine hangs.
Reviewed by: yongari
Tested on: powerpc(grehan), sparc64
MFC after: 1 week
status after attach, only after a reset
o when setting diversity via the sysctl don't update sc_diversity
until we know the hal requested worked
o while here eliminate sc_hasdiversity and sc_hastpc; just query
the hal each time since these are the only places we need to know
MFC after: 3 days
(i.e., smart battery) and fix various bugs found during the cleanup.
API changes:
* kernel access:
Access to individual batteries is now via devclass_find("battery").
Introduce new methods ACPI_BATT_GET_STATUS (for _BST-formatted data) and
ACPI_BATT_GET_INFO (for _BIF-formatted data). The helper function
acpi_battery_get_battinfo() now takes a device_t instead of a unit #
argument. If dev is NULL, this signifies all batteries.
* ioctl access:
The ACPIIO_BATT_GET_TYPE and ACPIIO_BATT_GET_BATTDESC ioctls have been
removed. Since there is now no need for a mapping between "virtual" unit
and physical unit, usermode programs can just specify the unit directly and
skip the old translation steps. In fact, acpiconf(8) was actually already
doing this and virtual unit was the same as physical unit in all cases
since there was previously only one battery type (acpi_cmbat). Additionally,
we now map the ACPIIO_BATT_GET_BIF and ACPIIO_BATT_GET_BST ioctls for all
batteries, if they provide the associated methods.
* apm compatibility device/ioctls: no change
* sysctl: no change
Since most third-party applications use the apm(4) compat interface, there
should be very few affected applications (if any).
Reviewed by: bruno
MFC after: 5 days
set in tulip_attach() and its value is never changed, so all the extra sets
are redundant. I'm guessing that at some point in time de(4) had an
alternate start routine, but that hasn't been true in recent history.
default:
- TULIP_NEED_FASTTIMEOUT - tulip_fasttimeout() wasn't called anywhere
- BIG_PACKET - only worked on i386 anyway
- TULIP_USE_SOFTINTR - doesn't compile and was never updated to handle
new netisr registration
- non-FreeBSD code
by Vladimir Dergachev for inclusion in DRM CVS, with minor modifications for
FreeBSD CVS and the appropriate license from Nicolai Haehnle on r300_reg.h.
Fixes hangs when using r300.sf.net userland, tested on a Radeon 9600 on amd64.
through umass(4), in order to make cdcontrol(1) to issue commands to
a USB CD driver.
The command IDs were obtained from the CAM subsystem. This was tested
on half dozen of USB CD drivers from different vendors.
Suggested by: "intron" <intron at intron dot ac>
PR: usb/83439
Reviewed by: sanpei
MFC After: 1 week
o Add Agere Hermes II and II.5 PC Cards (from zipit web page), TDK
GlobalNetworker 3410 (from dmesg for my card) and another alternate
PANASONIC KXLC0005_2 (from pcmcia-cs id lists).
problems we were having properly mapping the CIS attr space on some
cards. Those problems have been solved other ways, so this kludge is
no longer necessary. Remove it and have pccards come up a whole
second faster.
implement the OHCI programming interface. Thus it probes, but fails
to attach because of an invalid OHCI version. Rather than count on
the downstream tests properly failing, print a message that this
chipset isn't supported and fail the probe.
16-bit cards when we're powering them up. Other bridges may have
similar issues, so we do this for all of them by setting the
interrupt in the PCIC register 3 to be 0 (done always anyway)
and turning on the bit in the bridge control register to route these
interrupts via the ISA bus (or via the interrupt configured in the
PCIC register 3). '0' means disable completely. There's a small
chance this may interfere with the o2micro power hacks, but I'll
wait for reports to come in from o2micro users.
o Expand some of the comments about why we do certain things.
# this gets rid of the interrupt storm warnings on my 505TS. I think
# that we may need to do something similar on suspend, but I'm unsure
# since I don't have a laptop that supports suspened/resume with a
# ricoh chipset in it.
card. Mask it while we're doing power things, as the PC Card standard
suggests. Also, poll the POWER_CYCLE bit 10x a second as well as
providing a timeout for power cycle interrupt to happen.
The Ricoh '475 that I have doesn't seem to generate an interrupt for
power at the present time, so the polling is necessary for reasons as
yet unknown. This results in an interrupt storm warning that I'm
still trying to quantify (the o2micro trick doesn't work to mitigate
this storm). At the very least, this should help those users that
lost pccards on boot with the prior rev of this code. My VAIO
PCG-505TS is now happier, but more investigation is necessary.
variables rather than void * variables. This makes it easier and simpler
to get asm constraints and volatile keywords correct.
MFC after: 3 days
Tested on: i386, alpha, sparc64
Compiled on: ia64, powerpc, amd64
Kernel toolchain busted on: arm
succeed. There are many printers that return status over the read
channel, and if we wait for the status to become ready, then we can't
find the status automatically. Linux doesn't wait, nor does it ever
seem to really check the status in any meaningful way... If there
really is a problem, the writes to the bulk out endpoint will still
fail (like they would if the printer was ready and then ran out of
paper or became unready).
In addition, there are a number of printers being made that emulate
the 'status' byte by returning '0' always rather than '0x18'. This
fixes the EBUSY on open timeouts on those printer as well.
Reviewed by: the defining silence on usb@
gets the ethernet part of the card working, while putting appropriate
hooks in place for the modem code. Other ed based lan/modem combo
cards should be easy to add. Please send me info on any you'd like to
see support added.
Note: The 650 isn't a strictly conforming multi-function card, so
special support is needed. :-(
o Slightly change KBADDKBD and KBRELKBD ioctl() interface. Instead of passing
keyboard index pass keyboard_info_t structure with populated 'kb_unit' and
'kb_name' fields. Keyboard index is not very user-friendly and is not very
easy to obtain. Keyboard driver name and unit, on the other hand, is much
more user friendly and known almost all the time;
o Move definition of keyboard_info_t structure up;
o Teach kbdcontrol(1) how to attach/detach keyboards to/from the keyboard
multiplexor;
o Update kbdcontrol(1) man page and document new functionality.
To attach/detach keyboard to/from keyboard multiplexor one needs to use
keyboard device name (i.e. ukbd0).
MFC after: 1 week
o Don't busy wait on powerup. Instead, use the power up interrupt to wait
for the card to power up. Don't wait when we're turning the card off,
since no interrupt happens in that case.
o Convert many of the long DELAYs to tsleeps. We do not run before
the timer have stared, so DELAY isn't necessary. More DELAYs can likely
be eliminated in the future.
o When powering up the card, don't do anything if the card is already
powered up (before we'd power cycle it). This means that for most
cards we power them up once and then never change the power.
o On card eject, mask (by clearing) the CD bit. Before we set it, which
was wrong. We don't want to see any CD events past the first one since
they need to be debounced.
With these changes, I can insert/eject 16bit cards without glitching xmms'
sound output. Something very important to the development of better pccard
drivers :-)
o Add sys/dev/kbdmux/kbdmux.c to the source tree
o Add sys/modules/kbdmux/Makefile to the source tree
These are not yet connected to the build. Man page and other changes to follow.
MFC after: 1 week
channel devices. This should fix Dell 2450/2550/2650 systems that have RAID
enabled. This will likely not fix 2400 systems though as I don't have the
appropriate PCI Id info for them.
MFC After: 3 day
o Add two new ioctl's KBADDKBD and KBRELKBD. These are used to add and remove
keyboard to (and from) kbdmux(4) keyboard multiplexer;
o Introduce new kbd_find_keyboard2() function. It does exactly the same job
as kbd_find_keyboard() function except it allows to specify starting index.
This function can be used to iterate over keyboards array;
o Re-implement kbd_find_keyboard() as call to kbd_find_keyboard2() with starting
index of zero;
o Make sure syscons(4) passed KBADDKBD and KBRELKBD ioctl's onto currently
active keyboard.
These changes should not have any visible effect.
MFC after: 1 week
o Use pf more consistantly for pccard_function.
o Make sure we quote the strings properly (maybe this function belongs in
subr_bus.c)
o Tweak a comment to be more accurate after code changed.
and combine the old xe_pccard_{probe,attach} into one routine _attach.
Create a lookup function to lookup items in the table. Eliminate the
check for network cards, since many modems were eliminated by it.
Tweak a few printfs as well.
This gets many of my older cards working again CEM2, CEM28, CEM36,
etc.
support for them can really be added. Eliminate the check for network
card, because many of the cards in the commented out section are combo
cards and report themselves as either multifunction or modem. They
will be added back as I obtain hardware and test them more fully.
few other cards need. This firmware was obtained from the Linux
pcmica-cs project, but Ositech Communications, Inc has been kind
enough to grant permission to change the license to a pure BSDL type.
o Add timeout error recovery (from a thread context to avoid
the deferral of other critical interrupts).
o Properly recover commands across controller reset events.
o Update the driver to handle events and status codes that
have been added to the MPI spec since the driver was
originally written.
o Make the driver more modular to improve maintainability and
support dynamic "personality" registration (e.g. SCSI Initiator,
RAID, SAS, FC, etc).
o Shorten and simplify the common I/O path to improve driver
performance.
o Add RAID volume and RAID member state/settings reporting.
o Add periodic volume resynchronization status reporting.
o Add support for sysctl tunable resync rate, member write cache
enable, and volume transaction queue depth.
Sponsored by
----------------
Avid Technologies Inc:
SCSI error recovery, driver re-organization, update of MPI library
headers, portions of dynamic personality registration, and misc bug
fixes.
Wheel Open Technologies:
RAID event notification, RAID member pass-thru support, firmware
upload/download support, enhanced RAID resync speed, portions
of dynamic personality registration, and misc bug fixes.
Detailed Changes
================
mpt.c mpt_cam.c mpt_raid.c mpt_pci.c:
o Add support for personality modules. Each module exports
load, and unload module scope methods as well as probe, attach,
event, reset, shutdown, and detach per-device instance
methods
mpt.c mpt.h mpt_pci.c:
o The driver now associates a callback function (via an
index) with every transaction submitted to the controller.
This allows the main interrupt handler to absolve itself
of any knowledge of individual transaction/response types
by simply calling the callback function "registered" for
the transaction. We use a callback index instead of a
callback function pointer in each requests so we can
properly handle responses (e.g. event notifications)
that are not associated with a transaction. Personality
modules dynamically register their callbacks with the
driver core to receive the callback index to use for their
handlers.
o Move the interrupt handler into mpt.c. The ISR algorithm
is bus transport and OS independent and thus had no reason
to be in mpt_pci.c.
o Simplify configuration message reply handling by copying
reply frame data for the requester and storing completion
status in the original request structure.
o Add the mpt_complete_request_chain() helper method and use
it to implement reset handlers that must abort transactions.
o Keep track of all pending requests on the new
requests_pending_list in the softc.
o Add default handlers to mpt.c to handle generic event
notifications and controller reset activities. The event
handler code is largely the same as in the original driver.
The reset handler is new and terminates any pending transactions
with a status code indicating the controller needs to be
re-initialized.
o Add some endian support to the driver. A complete audit is
still required for this driver to have any hope of operating
in a big-endian environment.
o Use inttypes.h and __inline. Come closer to being style(9)
compliant.
o Remove extraneous use of typedefs.
o Convert request state from a strict enumeration to a series
of flags. This allows us to, for example, tag transactions
that have timed-out while retaining the state that the
transaction is still in-flight on the controller.
o Add mpt_wait_req() which allows a caller to poll or sleep
for the completion of a request. Use this to simplify
and factor code out from many initialization routines.
We also use this to sleep for task management request
completions in our CAM timeout handler.
mpt.c:
o Correct a bug in the event handler where request structures were
freed even if the request reply was marked as a continuation
reply. Continuation replies indicate that the controller still owns
the request and freeing these replies prematurely corrupted
controller state.
o Implement firmware upload and download. On controllers that do
not have dedicated NVRAM (as in the Sun v20/v40z), the firmware
image is downloaded to the controller by the system BIOS. This
image occupies precious controller RAM space until the host driver
fetches the image, reducing the number of concurrent I/Os the
controller can processes. The uploaded image is used to
re-program the controller during hard reset events since the
controller cannot fetch the firmware on its own. Implementing this
feature allows much higher queue depths when RAID volumes
are configured.
o Changed configuration page accessors to allow threads to sleep
rather than busy wait for completion.
o Removed hard coded data transfer sizes from configuration page
routines so that RAID configuration page processing is possible.
mpt_reg.h:
o Move controller register definitions into a separate file.
mpt.h:
o Re-arrange includes to allow inlined functions to be
defined in mpt.h.
o Add reply, event, and reset handler definitions.
o Add softc fields for handling timeout and controller
reset recovery.
mpt_cam.c:
o Move mpt_freebsd.c to mpt_cam.c. Move all core functionality,
such as event handling, into mpt.c leaving only CAM SCSI
support here.
o Revamp completion handler to provide correct CAM status for
all currently defined SCSI MPI message result codes.
o Register event and reset handlers with the MPT core. Modify
the event handler to notify CAM of bus reset events. The
controller reset handler will abort any transactions that
have timed out. All other pending CAM transactions are
correctly aborted by the core driver's reset handler.
o Allocate a single request up front to perform task management
operations. This guarantees that we can always perform a
TMF operation even when the controller is saturated with other
operations. The single request also serves as a perfect
mechanism of guaranteeing that only a single TMF is in flight
at a time - something that is required according to the MPT
Fusion documentation.
o Add a helper function for issuing task management requests
to the controller. This is used to abort individual requests
or perform a bus reset.
o Modify the CAM XPT_BUS_RESET ccb handler to wait for and
properly handle the status of the bus reset task management
frame used to reset the bus. The previous code assumed that
the reset request would always succeed.
o Add timeout recovery support. When a timeout occurs, the
timed-out request is added to a queue to be processed by
our recovery thread and the thread is woken up. The recovery
thread processes timed-out command serially, attempting first
to abort them and then falling back to a bus reset if an
abort fails.
o Add calls to mpt_reset() to reset the controller if any
handshake command, bus reset attempt or abort attempt
fails due to a timeout.
o Export a secondary "bus" to CAM that exposes all volume drive
members as pass-thru devices, allowing CAM to perform proper
speed negotiation to hidden devices.
o Add a CAM async event handler tracking the AC_FOUND_DEVICE event.
Use this to trigger calls to set the per-volume queue depth once
the volume is fully registered with CAM. This is required to avoid
hitting firmware limits on volume queue depth. Exceeding the
limit causes the firmware to hang.
mpt_cam.h:
o Add several helper functions for interfacing to CAM and
performing timeout recovery.
mpt_pci.c:
o Disable interrupts on the controller before registering and
enabling interrupt delivery to the OS. Otherwise we risk
receiving interrupts before the driver is ready to receive
them.
o Make use of compatibility macros that allow the driver to
be compiled under 4.x and 5.x.
mpt_raid.c:
o Add a per-controller instance RAID thread to perform settings
changes and query status (minimizes CPU busy wait loops).
o Use a shutdown handler to disable "Member Write Cache Enable"
(MWCE) setting for RAID arrays set to enable MWCE During Rebuild.
o Change reply handler function signature to allow handlers to defer
the deletion of reply frames. Use this to allow the event reply
handler to queue up events that need to be acked if no resources
are available to immediately ack an event. Queued events are
processed in mpt_free_request() where resources are freed. This
avoids a panic on resource shortage.
o Parse and print out RAID controller capabilities during driver probe.
o Define, allocate, and maintain RAID data structures for volumes,
hidden member physical disks and spare disks.
o Add dynamic sysctls for per-instance setting of the log level, array
resync rate, array member cache enable, and volume queue depth.
mpt_debug.c:
o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on
a particular log level to aid in tracking down driver issues.
o Add mpt_decode_value() which parses the bits in an integer
value based on a parsing table (mask, value, name string, tuples).
mpilib/*:
o Update mpi library header files to latest distribution from LSI.
Submitted by: gibbs
Approved by: re
- Add a missing "ATI" in one of the device descriptions.
- In machfb_init_engine() adjust a wait_for_fifo() call to the
actual number of operations.
- As a speed optimization cache setting the foreground and back-
ground colors.
- I got the meaning of V_DISPLAY_BLANK wrong, it's blank like turn
off and not blank like turn on and clear the screen. So move
clearing the screen to machfb_clear() were it hopefully belongs.
- Properly implement V_DISPLAY_BLANK, V_DISPLAY_STAND_BY and
V_DISPLAY_SUSPEND. This makes blank_saver.ko and green_saver.ko
work. [1]
- Implement machfb_load_palette() and machfb_save_palette() and
set the V_ADP_PALETTE flag. This makes fade_saver.ko work. [2]
- Install our 16-color color map only once and with an offset of
16 as the OBP driver expects white to be at index 0 and black at
255. This fixes the inversion of the colors back at the boot
prompt after shutting down FreeBSD. This will also be handy if
we ever want to implement breaking into OFW. Unfortunately there
doesn't seem to be a better way to achieve this as e.g. bypassing
the color map isn't supported by all Mach64 chips.
- Move invalidating the cache variables to machfb_set_mode() and
set the V_ADP_MODECHANGE flag. This causes machfb_set_mode() to
be called when the X server shuts down. This hopefully will fix
the screen corruption happening occasionally when shutting down
the X server and which is present until switching to another VTY.
Inspired by: NetBSD [1]
Based on: Xorg [2]
Approved by: re (scottl)
- Let creator_bitblt() return ENODEV as it's not implemented (missed
in sys/dev/fb/creator.c rev. 1.6).
- As a speed optimization inline the creator_ras_wait() etc. helper
functions and also cache setting the font increment, font width
and plane mask. [1]
- I got the meaning of V_DISPLAY_BLANK wrong, it's blank like turn
off and not blank like turn on and clear the screen. So move
clearing the screen to creator_clear() were it hopefully belongs.
- Properly implement V_DISPLAY_BLANK, V_DISPLAY_STAND_BY and
V_DISPLAY_SUSPEND. This makes blank_saver.ko and green_saver.ko
work. [1]
- Change the order of operations in creator_fill_rect(), i.e. write
y before x and cy before cx. This fixes drawing the top part of
the border with Elite3D cards when switching from Xorg to a VTY.
- Move setting the chip configuration we use and invalidating the
cache variables to creator_set_mode() and set the V_ADP_MODECHANGE
flag. This causes creator_set_mode() to be called when the X server
shuts down which fixes the screen corruption caused most of the
time by Xorg not restoring the original configuration present at
startup.
Inspired by/based on: Xorg [1]
Approved by: re (scottl)
variant to allocating a fixed set of 5 banks that the EBus variant
is documented to have (and also has in reality). Trying to allocate
up to 8 banks is a remnant from experiments during the development
of this driver.
Discussed with: joerg, yongari
Reviewed by: yongari
Approved by: re (scottl)
- Update driver interrupt statistics correctly.
sys/sys/pmc.h, sys/dev/hwpmc/hwpmc_mod.c:
- Fix a bug affecting debug printfs.
- Move the 'stalled' flag from being in a bit in the
'pm_flags' field of a 'struct pmc' to a field of its own in the
same structure. This flag is updated from the NMI handler and
keeping it separate makes it easier to avoid races with other
parts of the code.
sys/dev/hwpmc/hwpmc_logging.c:
- Do arithmetic with 'uintptr_t' types rather that casting
to and from 'char *'.
Approved by: re (scottl)
