When building out-of-tree modules, it appears that the system share/mk
is used, but sys/conf/kern.mk is used. That results in MK_INIT_ALL_ZERO
being undefined. In the interest of maximum compatability, check
that MK_INIT_ALL_* and COMPILER_FEATURES are defined before comparing
their values.
Reported by: mmacy
Sponsored by: DARPA
Otherwise, a socket can have a non-NULL tp->tod while TF_TOE is clear.
In particular, if a newly accepted socket falls back to non-TOE due to
an active open failure, the non-TOE socket will still have tp->tod set
even though TF_TOE is clear.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27028
There are two options:
- WITH_INIT_ALL_ZERO: Zero all variables on the stack.
- WITH_INIT_ALL_PATTERN: Initialize variables with well-defined patterns.
The exact pattern are a compiler implementation detail and vary by type.
They are somewhat documented in the LLVM commit message:
https://reviews.llvm.org/rL349442
I've used WITH_INIT_ALL_* to match Microsoft's InitAll feature rather
than naming them after the LLVM specific compiler flags.
In a range of consumer products, options like these are used in
both debug and production builds with debugs builds using patterns
(intended to provoke crashes on use of uninitialized values) and
production using zeros (deemed more likely to lead to harmless
misbehavior or NULL-pointer dereferences).
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27131
uma_zone_reserve()), messages like the following appear on the console:
"Freed UMA keg (Test zone) was not empty (0 items). Lost 528 pages of
memory."
When keg_drain_domain() is draining the zone, it tries to keep the number
of items specified in the reservation. However, when we are destroying the
UMA zone, we do not need to keep those items. Therefore, when destroying a
non-secondary and non-cache zone, we should reset the keg reservation to 0
prior to draining the zone.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27129
This in particular unbreaks rtkit.
The limitation was a leftover of previous state, to quote a
comment:
/*
* Though lwpid is unique, only current process is supported
* since there is no efficient way to look up a LWP yet.
*/
Long since then a global tid hash was introduced to remedy
the problem.
Permission checks still apply.
Submitted by: greg_unrelenting.technology (Greg V)
Differential Revision: https://reviews.freebsd.org/D27158
This deduplicates 2 sets of caches using the same sizes.
Memory savings fluctuate a lot, one sample result is buildworld on zfs
saving ~180MB RAM in reduced page count associated with zio caches.
Refer to the Linux commit mentioned below for a more detailed description.
Linux commit:
a18177925c252da7801149abe217c05b80884798
Requested by: Isilon
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
The revision r342168 broke ABI of ng_nat needlessly and
the change was merged to stable branches breaking ABI there, too.
Unbreak it.
PR: 250722
MFC after: 1 week
In r367327 generic_bs_sr_<n> were derived from mips. Given we are calling
generic_bs_w_<n> and no write directly, we do not have to do the address
calculations ourselves as eneric_bs_w_<n> will do a str val [bsh, offset].
All we actually have to do is increment offset.
MFC after: 3 days
There are workloads with very bursty tid allocation and since unr tries very
hard to have small-sized bitmaps it keeps reallocating memory. Just doing
buildkernel gives almost 150k calls to free coming from unr.
This also gets rid of the hack which tried to postpone TID reuse.
Reviewed by: kib, markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D27101
The intent is to replace the current id allocation method and a known upper
bound will be useful.
Reviewed by: kib (previous version), markj (previous version)
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D27100
* TCP segments without timestamps should be dropped when support for
the timestamp option has been negotiated.
* TCP segments with timestamps should be processed normally if support
for the timestamp option has not been negotiated.
This patch enforces the above.
PR: 250499
Reviewed by: gnn, rrs
MFC after: 1 week
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D27148
It includes:
ACPI_HANDLE() implementation.
AC and VIDEO ACPI events notification support.
Replacement of hand-rolled GPLed _DSM method evaluation helpers
with in-base ones.
Submitted by: wulf
Differential Revision: https://reviews.freebsd.org/D26603
from a Linux binary. Should come handy for AppImages.
Reviewed by: asomers
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26959
The MAC address can be set with the optional mac-addr property in the VF
section of the iovctl.conf(5) used to instantiate the VFs.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Query the firmware for the MAC address set by the PF for the VF and use
it instead of the firmware generated MAC if it's available.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
The HPT is always stored in big-endian, as it is accessed directly by the
hardware as well as the kernel. As such, it is necessary to convert values
to and from native endian when running on LE.
Some unconverted accesses snuck in accidentally with r367417.
Apply the appropriate conversions to fix boot hanging on powerpc64le.
Sponsored by: Tag1 Consulting, Inc.
Add the missing static keyword present in the declaration.
Reviewed by: melifaro
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27024
Currently there is no locking done to protect this structure. It is
likely okay due to the low-volume nature of IGMP, but allows for
the possibility of underflow. This appears to be one of the only
holdouts of the conversion to counter(9) which was done for most
protocol stat structures around 2013.
This also updates the visibility of this stats structure so that it can
be consumed from elsewhere in the kernel, consistent with the vast
majority of VNET_PCPUSTAT structures.
Reviewed by: kp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27023
Under specific conditions, a window update can be sent with
outdated SACK information. Some clients react to this by
subsequently delaying loss recovery, making TCP perform very
poorly.
Reported by: chengc_netapp.com
Reviewed by: rrs, jtl
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D24237
The goal of the fib support is to provide multiple independent
routing tables, isolated from each other.
net.add_addr_allfibs default tries to shift gears in the opposite
direction, unconditionally inserting all addresses to all of the fibs.
There are use cases when this is necessary, however this is not a
default expected behaviour, especially compared to other implementations.
Provide WARNING message for the setups with multiple fibs to notify
potential users of the feature.
Differential Revision: https://reviews.freebsd.org/D26076
The ZIL will be opened on the first write, not earlier.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <oshogbo@vexillium.org>
OpenZFS Pull Request: https://github.com/openzfs/zfs/pull/11152
PR: 250934
- map those IPv4 / IPv6 socket options which exist in FreeBSD
+ most of them visually verified to have the same type/layout of arguments
+ not tested with linux programs to behave as intended
- be more human readable for known options which are not handled
- be more verbose for unhandled socket message flags we know about
- print the jail ID in linux_msg if run in a jail
- add possibility to print debug message about known missing parts only once
- add multiple levels of sysctl linux.debug:
1: print debug messages, tell about unimplemented stuff (only once)
2: like 1, but also print messages about implemented but not tested
stuff (only once)
3+: like 2, but no rate limiting of messages
- increase default linux debug level from 1 to 3
We are a lot more verbose in as we need to be (e.g. some of the IP socket
options which are the same, and share the same memory layout, and are
believed to work). The reason is that we have no good testsuite to test those
linux-bits. The LTP or other test suites like the python one, are not fully
up to the task we need. As such the excessive messages about emulated but not
tested socket options.
IMO any MFC (possible, but most probably not by me) should set the default
debug level to 1.
Discussed with: trasz
imgact_binmisc matches magic/mask from imgp->image_header, which is only a
single page in size mapped from the first page of an image. One can specify
an interpreter that matches on, e.g., --offset 4096 --size 256 to read up to
256 bytes past the mapped first page.
The limitation is that we cannot specify a magic string that exceeds a
single page, and we can't allow offset + size to exceed a single page
either. A static assert has been added in case someone finds it useful to
try and expand the size, but it does seem a little unlikely.
While this looks kind of exploitable at a sideways squinty-glance, there are
a couple of mitigating factors:
1.) imgact_binmisc is not enabled by default,
2.) entries may only be added by the superuser,
3.) trying to exploit this information to read what's mapped past the end
would be worse than a root canal or some other relatably painful
experience, and
4.) there's no way one could pull this off without it being completely
obvious.
The first page is mapped out of an sf_buf, the implementation of which (or
lack thereof) depends on your platform.
MFC after: 1 week
access the socket send or receive buffer. This is not possible for
listening sockets since r319722.
Because send()/recv() calls fail on listening sockets, fail also ioctl()
indicating EINVAL.
PR: 250366
Reported by: Yong-Hao Zou
Reviewed by: glebius, rscheff
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D26897
The offset we need to account for in the interpreter string comes in two
variants:
1. Fixed - macros other than #a that will not vary from invocation to
invocation
2. Variable - #a, which is substitued with the argv0 that we're replacing
Note that we don't have a mechanism to modify an existing entry. By
recording both of these offset requirements when the interpreter is added,
we can avoid some unnecessary calculations in the exec path.
Most importantly, we can know up-front whether we need to grab
calculate/grab the the filename for this interpreter. We also get to avoid
walking the string a first time looking for macros. For most invocations,
it's a swift exit as they won't have any, but there's no point entering a
loop and searching for the macro indicator if we already know there will not
be one.
While we're here, go ahead and only calculate the argv0 name length once per
invocation. While it's unlikely that we'll have more than one #a, there's no
reason to recalculate it every time we encounter an #a when it will not
change.
I have not bothered trying to benchmark this at all, because it's arguably a
minor and straightforward/obvious improvement.
MFC after: 1 week
This adds a dedicated counter updated with atomics when INVARIANTS
is used. As a side effect one can reliably determine the lock is held
for reading by at least one thread, but it's still not possible to
find out whether curthread has the lock in said mode.
This should be good enough in practice.
Problem spotted by avg.
This doesn't change anything at the moment since the out-of-order elements
were a pair of uint32_t, but future additions may have caused unnecessary
padding by following the existing precedent.
MFC after: 1 week
When using the ALT+CTRL+ESC sequence to break into kdb, the keyboard is
completely borked when you return. watch(8) shows that it's working, but
it's inserting escape sequences.
Further investigation revealed that VT_ALT_TO_ESC_HACK is the default and
directly conflicts with this sequence, so upon return from the debugger
ALKED is set.
If they triggered the break to debugger, it's safe to assume they didn't
mean to use VT_ALT_TO_ESC_HACK, so just unset it to reduce the surprise when
the keyboard seems non-functional upon return.
Reviewed by: tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27109
If we hadn't been traced in the first place when syscallenter()
started executing, we can ignore TDB_USERWR. TDB_USERWR can get set,
sure, but if it does, it's because the debugger raced with the syscall,
and it cannot depend on winning that race.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: EPSRC
Differential Revision: https://reviews.freebsd.org/D26585
This module handles relatively few execs (initial qemu-user-static, then
qemu-user-static handles exec'ing itself for binaries it's already running),
but all execs pay the price of at least taking the relatively expensive
sx/slock to check for a match when this module is loaded. Future work will
almost certainly swap this out for another lock, perhaps an rmslock.
The RLOCK/WLOCK phrasing was chosen based on what the callers are really
wanting, rather than using the verbiage typically appropriate for an sx.
MFC after: 1 week
We may want to reserve bits in the future for kernel-only use, so start
rejecting any that aren't the two that we're currently expecting from
userland.
MFC after: 1 week
Previously, non-preemptible epochs could not check; in_epoch() would always
fail, usually because non-preemptible epochs don't imply THREAD_NO_SLEEPING.
For default epochs, it's easy enough to verify that we're in the given
epoch: if we're in a critical section and our record for the given epoch
is active, then we're in it.
This patch also adds some additional INVARIANTS bookkeeping. Notably, we set
and check the recorded thread in epoch_enter/epoch_exit to try and catch
some edge-cases for the caller. It also checks upon freeing that none of the
records had a thread in the epoch, which may make it a little easier to
diagnose some improper use if epoch_free() took place while some other
thread was inside.
This version differs slightly from what was just previously reviewed by the
below-listed, in that in_epoch() will assert that no CPU has this thread
recorded even if it *is* currently in a critical section. This is intended
to catch cases where the caller might have somehow messed up critical
section nesting, we can catch both if they exited the critical section or if
they exited, migrated, then re-entered (on the wrong CPU).
Reviewed by: kib, markj (both previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27098
Notably, streamline error paths through the existing 'done' label, making it
easier to quickly verify correct cleanup.
Future work might add a kernel-only flag to indicate that a interpreter uses
#a. Currently, all executions via imgact_binmisc pay the penalty of
constructing sname/fname, even if they will not use it. qemu-user-static
doesn't need it, the stock rc script for qemu-user-static certainly doesn't
use it, and I suspect these are the vast majority of (if not the only)
current users.
MFC after: 1 week
Improve the output of the recently often experienced debug message in order
to gather further data.
PR: 237666
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D27108
Move dtrace SDT definitions into linux_common module code. Also, build
linux_dummy.c into the linux_common kld -- we don't need separate
versions of these stubs for 32- and 64-bit emulation.
Reported by: several
PR: 250897
Discussed with: emaste, trasz
Tested by: John Kennedy, Yasuhiro KIMURA, Oleg Sidorkin
X-MFC-With: r367395
Differential Revision: https://reviews.freebsd.org/D27124
According to code comments the original motivation was to allow for
malloc_type_internal changes without ABI breakage. This can be trivially
accomplished by providing spare fields and versioning the struct, as
implemented in the patch below.
The upshots are one less memory indirection on each alloc and disappearance
of mt_zone.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27104
vt_generate_cons_palette() does take max values of RGB component colours, not
mask. Also we need to set info->fb_cmsize, or vt_fb_init() will re-initialize
the info->fb_cmap.
This brings its 'struct syscall_args' in sync with other architectures.
Reviewed by: bdragon, jhibbits
MFC after: 2 weeks
Sponsored by: EPSRC
Differential Revision: https://reviews.freebsd.org/D26605
While here, use MAXARGS. This brings its 'struct syscall_args' in sync
with most other architectures.
Reviewed by: arichardson, brooks
MFC after: 2 weeks
Sponsored by: EPSRC
Differential Revision: https://reviews.freebsd.org/D26619
This fixes a potential crash in firmware 1.25.0.0 on the passive open
side during TOE operation.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
Fix build errors introduced by r367417 and r367390:
- Guard label reached only by powerpc64
- Guard vm_reserv_level_iffullpop call, that is not defined on powerpc
variants that don't support superpages
- Add missing hwpmc file, for when hwpmc is built into kernel
- Rename cse*() to cse_*() to more closely match other local APIs in
this file.
- Merge the old csecreate() into cryptodev_create_session() and rename
the new function to cse_create().
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27070
My script to convert git commits to svn patch does not handle binary
files correctly, and r367387 committed a set of empty files as a result.
MFC with: r367387
Sponsored by: Rubicon Communications, LLC (Netgate)
This change adds support for transparent superpages for PowerPC64
systems using Hashed Page Tables (HPT). All pmap operations are
supported.
The changes were inspired by RISC-V implementation of superpages,
by @markj (r344106), but heavily adapted to fit PPC64 HPT architecture
and existing MMU OEA64 code.
While these changes are not better tested, superpages support is disabled by
default. To enable it, use vm.pmap.superpages_enabled=1.
In this initial implementation, when superpages are disabled, system
performance stays at the same level as without these changes. When
superpages are enabled, buildworld time increases a bit (~2%). However,
for workloads that put a heavy pressure on the TLB the performance boost
is much bigger (see HPC Challenge and pgbench on D25237).
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D25237
Add support for Floating-Point Exception traps on 32 and 64 bit platforms.
Also make sure to clean FPSCR on EXEC and thread exit
Author of initial version: Renato Riolino <renato.riolino@eldorad.org.br>
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23623
This simplifies cryptof_ioctl as it now a wrapper around functions that
contain the bulk of the per-ioctl logic.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27068
This is consistent with cryptodevkey_cb being defined before it is used
and removes a prototype in the middle of the file.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27067
OCF drivers in general should perform as many session parameter checks
as possible during probesession rather than when creating a new
session. I got this wrong for aesni(4) in r359374. In addition,
aesni(4) was performing the check for digest-only requests and failing
to create digest-only sessions as a result.
Reported by: jkim
Tested by: jkim
Sponsored by: Chelsio Communications
This breaks the case where the original pointer was NULL but an
in-line IV was used.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27064
Both the size (128 bytes) and ephemeral nature of allocations make it a great
fit for malloc.
A dedicated zone unnecessarily avoids sharing buckets with 128-byte objects.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D27103
This ensures that no writes are pending in memory, either metadata or
user data, but not including dirty pages not yet converted to fs writes.
Only filesystems declared local are suspended.
Note that this does not guarantee absence of the metadata errors or
leaks if resume is not done: for instance, on UFS unlinked but opened
inodes are leaked and require fsck to gc.
Reviewed by: markj
Discussed with: imp
Tested by: imp (previous version), pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D27054
in sync with (most) other architectures. No functional changes.
Reviewed by: manu
Tested by: mmel
MFC after: 2 weeks
Sponsored by: EPSRC
Differential Revision: https://reviews.freebsd.org/D26604
This change adds support for POWER8 and POWER9 PMCs (bare metal and
pseries).
All PowerISA 2.07B non-random events are supported.
Implementation was based on that of PPC970.
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26110
Sample usage: kernel modules can decide whether to stick to malloc or
create their own zone.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27097
This provides an OpenCrypto driver for Intel QuickAssist devices. The
driver was initially ported from NetBSD and comes with a few
improvements:
- support for GMAC/AES-GCM, AES-CTR and AES-XTS, and support for
SHA/HMAC-authenticated encryption
- support for detaching the driver
- various bug fixes
- DH895X support
Discussed with: jhb
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D26963
The 2 provided zones had inconsistent naming between each other
("int" and "64") and other allocator zones (which use bytes).
Follow malloc by naming them "pcpu-" + size in bytes.
This is a step towards replacing ad-hoc per-cpu zones with
general slabs.
And add a _74XX suffix to 74XX SPRs.
This is a preparation for adding support to POWER8/9 PMCs, which have most
SPRs equal to 970 ones.
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26532
On a sample box vmstat -z shows:
ITEM SIZE LIMIT USED FREE REQ
64: 64, 0, 1043784, 4367538,3698187229
selfd: 64, 0, 1520, 13726,182729008
But at the same time:
vm.uma.selfd.keg.domain.1.pages: 121
vm.uma.selfd.keg.domain.0.pages: 121
Thus 242 pages got pulled even though the malloc zone would likely accomodate
the load without using extra memory.
Memory allocated by bus_dmamem_alloc will take into account any alignment
requirements of the CPU it's running on. Stop trying to bounce in this case
as there is no bounce zone allocated.
Reported by: manu, tuexen
Tested by: manu
Sponsored by: Innovate UK
Add a pseudofs node flag 'PFS_AUTODRAIN', which automatically emits sbuf
contents to the caller when the sbuf buffer fills. This is only
permissible if the corresponding PFS node fill function can sleep
whenever it appends to the sbuf.
linprocfs' /proc/self/maps node happens to meet this requirement.
Streaming out the file as it is composed avoids truncating the output
and also avoids preallocating a very large buffer.
Reviewed by: markj; earlier version: emaste, kib, trasz
Differential Revision: https://reviews.freebsd.org/D27047
- Removed a bunch of redundant headers
- Don't explicitly initialize to 0
- The !error check prior to setting imgp->interpreter_name is redundant, all
error paths should and do return or go to 'done'. We have larger problems
otherwise.
lz4 port from illumos to Linux added a 16KB per-CPU cache to accommodate for
the missing 16KB malloc. FreeBSD supports this size, making the extra cache
harmful as it can't share buckets.
In pmap_bootstrap(), we fill kernel_pmap->pm_active since it is
invariably active on all harts. However, this marks it as active even
for harts that don't exist in the system, which can cause issue when the
mask is passed to the SBI firmware via sbi_remote_sfence_vma().
Specifically, the SBI spec allows SBI_ERR_INVALID_PARAM to be returned
when an invalid hart is set in the mask.
The latest version of OpenSBI does not have this issue, but v0.6 does,
and this is triggering a recently added KASSERT in CI. Switch to only
setting bits in pm_active for harts that enter the system.
Reported by: Jenkins
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27080