On Windows, AUX is the auxiliary device, usually pointing to COM1.
Therefore it is forbidden to create a file named aux.c. To make it a bit
easier for Windows users to check out our source code, rename this file
to auxv.c.
MFC after: 1 month
Discussed with: kib
Suggested by: Eric van Gyzen <eric vangyzen net>
they need to refer to static constants, which C99 does not allow for
extern inline functions.
While here, change a comment in e_rem_pio2f.c to mention the correct
number of bits.
Reviewed by: bde
MFC after: 1 week
Apart from the fact that nothing should have OPEN_MAX as a limit (as opposed
to RLIMIT_NOFILE from getrlimit() or _SC_OPEN_MAX from sysconf()), POSIX
does not require us to check this. POSIX does have a requirement on the
application that maxfds not exceed {OPEN_MAX}, but does not require the
implementation to check it ("may fail").
PR: 95239
Apart from the fact that nothing should have OPEN_MAX as a limit (as opposed
to RLIMIT_NOFILE from getrlimit() or _SC_OPEN_MAX from sysconf()), POSIX
does not require us to check this.
PR: 95239
Submitted by: Todd Miller
private data.
We can set/get private data with the documented el_get() and
el_set() so there's no need for our local extensions, which
never received much use anyway.
While here, also re-arrange the call to term_init_arrow. This
was left over from r89735 but is not required anymore.
This changes reduce differences against NetBSD's libedit.
MFC after: 2 months
compatibility with the INTERVALS macro used in the soon-to-be-commmitted
expm1l() and someday-to-be-committed log*l() functions.
Add a comment into ld128/s_expl.c noting at gcc issue that was
deleted when rewriting ld80/e_expl.c as ld128/s_expl.c.
Requested by: bde
Approved by: das (mentor)
. Remove a few #ifdefs that should have been removed in the initial
commit.
. Sort fpmath.h to its rightful place.
* ld128/s_expl.c:
. Replace EXPMASK with its actual value.
. Sort fpmath.h to its rightful place.
Requested by: bde
Approved by: das (mentor)
It is obvious that its modification time will change with each such file
builded.
This bug cause whole libelf to rebuild itself each second make run
(and relink that files on each first make run) in the loop.
format. These implementations are based on
PTP Tang, "Table-driven implementation of the exponential function
in IEEE floating-point arithmetic," ACM Trans. Math. Soft., 15,
144-157 (1989).
PR: standards/152415
Submitted by: kargl
Reviewed by: bde, das
Approved by: das (mentor)
Append '__' prefix to the tag of struct oflock, and put it under BSD
namespace. Structure is needed both by libc and kernel, thus cannot be
hidden under #ifdef _KERNEL.
Move a set of non-standard F_* and O_* constants into BSD namespace.
SUSv4 explicitely allows implemenation to pollute F_* and O_* names
after fcntl.h is included, but it costs us nothing to adhere
to the specification if exact POSIX compliance level is requested by
user code.
Change some spaces after #define to tabs.
Noted by and discussed with: bde
MFC after: 1 week
makelist:
change tr '[a-z]' '[A-Z]' to tr '[:lower:]' '[:upper:]' so that POSIX
systems work proerly regardsless of environment variable settings.
tokenizer.c:
pass lint on _LP64
Obtained from: NetBSD
MFC after: 2 weeks
bin/sh has been taught about el_gets setting the count to -1
on error, so now we can partially revert r238173 to reduce
differences with NetBSD's implementation.
Unfortunately NetBSD's libedit handling of EINTR (Revision
1.44 in read.c + SIGWINCH fixes) still causes trouble in
bin/sh and other utilities and has to be avoided.
MFC after: 1 month
This partially reverts some changes from r237448 that are causing
breakage when resizing under bin/sh .
Reverted changes from NetBSD are:
Mar 10 20:46:15 2009 - editline.3 read.c
make el_gets set the count to -1 on error to distinguish between EOF and
error.
Feb 19 15:20:22 2009 - read.c sig.c sig.h
reset and redraw on sigcont. From Anon Ymous.
Feb 15 21:24:13 2009
don't restart on EINTR, instead return NULL immediately. From Anon Ymous
PR: 169603
Reported by: Peter Jeremy, David Shao
MFC after: 3 days
This method is more sandbox-friendly and also should be faster as only
one syscall is needed instead of three.
In case of an error fall back to the old method.
Reviewed by: simon, gleb
MFC after: 2 weeks
The function isascii_l() is not in POSIX even though isascii() is,
probably because isascii() is marked as obsolete. The other functions,
like digittoint_l() and ishexnumber_l(), are FreeBSD-specific just like
their non-_l versions.
When building libelf in the bootstrap stage this would include the tree
versions of, for example, sys/_types.h. This would work as long as the
tree's version of this file was close enough to the system's version of
the file. If, however, there was a change in the tree such that the location
of a typedef was moved this would cause problems. In this case the version
of sys/_types.h in the tree no longer defines __wchar_t and expects it to
to be defined in machine/_types.h, however we pick up machine/_types.h from
the system and find it is not defined there. The solution is to restrict the
parts of sys er include from the tree to those that are needed.
This fixes the recent Tinderbox failure.
Pointy Hat to: andrew
Our libedit has been diverging from the mainstream version
maintained in NetBSD. As a consequence it has been difficult
to do an appropriate MFV and we have been bringing only
partial updates.
Here we update most of the files to at least match the
version available in NetBSD's snapshot of 20091228. This
version was chosen because it still doesn't include wide
character support (UTF-8), which involves many changes and
new files.
From NetBSD's logs:
Dec 15 22:13:33 2006 - editline.3 el.c el.h histedit.h
add EL_GETFP, and EL_SETFP.
Apr 5 15:53:28 2008 - editline.3 el.c histedit.h readline.c
add EL_REFRESH for the benefit of readline
Sep 10 15:45:37 2008 - common.c el.c read.c refresh.c sig.c term.c term.h tty.c
Allow a single process to control multiple ttys (for pthreads using _REENTRANT)
using multiple EditLine objects.
Jan 18 12:17:24 2009 - el.c read.c readline.c
fix -Wsign-compare issues
Feb 6 14:40:32 2009 - history.c
Plug memory leak, from MySQL.
Feb 5 19:15:44 2009 - histedit.h read.c
match documentation in el_push
Feb 6 13:14:37 2009 - vi.c
Portability fix.
Feb 12 13:39:49 2009 - readline.c term.c
More fixes for existing portability stuff.
Feb 15 21:24:13 2009 - el.h read.c
don't restart on EINTR, instead return NULL immediately. From Anon Ymous
Feb 15 21:25:01 2009 - sig.c sig.h
in order for read() to return EINTR we need to use sigaction, not signal,
otherwise SA_RESTART is set.
Feb 15 21:55:23 2009 - chared.c chared.h common.c emacs.c filecomplete.c
filecomplete.h key.c key.h read.c readline.c refresh.c search.c
term.c tokenizer.c tty.c vi.c
pass lint on _LP64.
Feb 17 21:34:26 2009 - el.c histedit.h prompt.c prompt.h
allow for a prompt argument.
Feb 18 15:04:40 2009 - sig.c
SA_RESTART for all signals but SIGINT. From Anon Ymous.
Feb 19 15:20:22 2009 - read.c sig.c sig.h
reset and redraw on sigcont. From Anon Ymous.
Feb 21 23:31:56 2009 - key.c key.h readline.c vi.c
more size_t stuff.
Mar 10 20:46:15 2009 - editline.3 read.c
make el_gets set the count to -1 on error to distinguish between EOF and
error.
Mar 31 17:38:27 2009 - editline.3 el.c histedit.h prompt.c prompt.h
refresh.c term.c term.h
Implement literal prompt sequences. Now someone can implement
RL_PROMPT_START_LITERAL/RL_PROMPT_END_LITERAL :-)
Mar 31 21:33:17 2009 - term.c
cast to size_t to avoid sign / unsigned comparison warning.
Apr 23 02:03 2009 - term.c
Apply patch (requested by msaitoh in ticket #2007):
Coverity CID 1668: Plug memory leak when malloc() failed.:55 2009
May 11 18:33:30 2009 - editline.3 el.c histedit.h
restore binary compatibility by providing new prompt functions that take
an extra literal character.
May 19 21:45:14 2009 - refresh.c
always scroll when we advance past bottom. From Caleb Welton
cwelton at greenplum dot com.
Jul 17 12:27:57 2009 - term.c
- off by one in the term.h case.
- make code more similar to tcsh (if we want to handle wide chars, this is
needed; for now it is a no-op)
Jul 22 15:56:29 2009 - el.c
Move filename to the scope it is being used.
From Michael Cook mcook at bbn dot com
Jul 22 15:57:00 2009 - read.c
Always initialize nread since it is an out param.
From Michael Cook mcook at bbn dot com
Jul 22 18:25:26 2009 - el.c
Only need path if we have issetugid... From Anon Ymous
Jul 25 21:19:23 2009 - el.c
Ignore comment lines in .editrc from Jess Thrysoee
Sep 7 21:24:33 2009
histedit.h history.c readline.c
apply apple patches from:
http://opensource.apple.com/source/libedit/libedit-11/patches/
Dec 28 21:52:43 2009 - refresh.c
Fix bug where tab completion on the second or > line that caused listing
ended up corrupting the display by an extra space in the beginning. Reported
by Mac Chan.
Dec 28 22:15:36 2009 - refresh.c term.c
reduce diff with tcsh
Obtained from: NetBSD
Tested by: bapt, jilles and current@
MFC after: 1 week
clock_gettime(2) functions if supported. The speedup seen in
microbenchmarks is in range 4x-7x depending on the hardware.
Only amd64 and i386 architectures are supported. Libc uses rdtsc and
kernel data to calculate current time, if enabled by kernel.
Hopefully, this code is going to migrate into vdso in some future.
Discussed with: bde
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
(x86 assembler optimization disabled for now because it
requires the new .cfi_* directives that is not supported
by base system binutils).
MFC after: 1 week
First, extend the changes in r230782 to better handle the common case
of using NOREUSE with sequential reads. A NOREUSE file descriptor
will now track the last implicit DONTNEED request it made as a result
of a NOREUSE read. If a subsequent NOREUSE read is adjacent to the
previous range, it will apply the DONTNEED request to the entire range
of both the previous read and the current read. The effect is that
each read of a file accessed sequentially will apply the DONTNEED
request to the entire range that has been read. This allows NOREUSE
to properly handle misaligned reads by flushing each buffer to cache
once it has been completely read.
Second, apply the same changes made to read(2) by r230782 and this
change to writes. This provides much better performance in the
sequential write case as it allows writes to still be clustered. It
also provides much better performance for misaligned writes. It does
mean that NOREUSE will be generally ineffective for non-sequential
writes as the current implementation relies on a future NOREUSE
write's implicit DONTNEED request to flush the dirty buffer from the
current write.
MFC after: 2 weeks
for example)
get the username information from old_pw structures to still allow renaming of a
user.
Reported by: Claude Buisson <clbuisson@orange.fr>
Approved by: des (mentor)
MFC after: 3 weeks
string buffer for each linelist l_line into one large string. Since
linelists parsed out during the previous passes store the pointers to
previously allocated l_lines, the reallocation caused undefined
behaviour on accessing the buffers, and quite deterministic fault on
freeing them (in mountd(8) startup).
This fixes reading of netgroup(5) file which contains more then one
netgroup.
Discussed with: ghelmer
MFC after: 3 days
which was inadvertently caused by r236185: if SHLIBDIR is set using the
?= operator, it must be done *before* bsd.own.mk is included, otherwise
the default value is still used.
Note, bsd.lib.mk will take care of removing the copy in /usr/lib upon
installation, so no addition to ObsoleteFiles.inc is needed.
X-MFC-With: r236185
thing it was still used for was to set the "global default" password
hash. Since the stock auth.conf contained nothing but comments, the
global default was actually the first algorithm in crypt(3)'s list,
which happens to be DES; I take the fact that nobody noticed as proof
that it was not used outside of crypt(3).
The only other use in our tree was in the Kerberos support code in
in tinyware's passwd(1). I removed that code in an earlier commit;
it would not have compiled anyway, as it only supported Kerberos IV.
The auth_getval() function is now a stub that always returns NULL,
which has the same effect as a functional auth_getval() with an
empty auth.conf.
MFC after: 3 weeks
- Use CLOCK_MONOTONIC instead of CLOCK_REALTIME, because CLOCK_MONOTONIC
does not wrap into negative in near future. This fixes any potential
problems using "pthread_cond_timedwait()".
- Fix a bug where the "libusb_wait_for_event()" function computes an
absolute timeout instead of a relative timeout. USB transfers do
not depend on this timeout value.
- Add dependency towards LibPthread to Makefile, because LibUSB v1.0
needs this library to function correctly.
MFC after: 1 week
http://austingroupbugs.net/view.php?id=385#c713
(Resolved state) recommend this way for the current standard (called
"earlier" in the text)
"However, earlier versions of this standard did not require this, and the
same example had to be written as:
// buf was obtained by malloc(buflen)
ret = write(fd, buf, buflen);
if (ret < 0) {
int save = errno;
free(buf);
errno = save;
return ret;
}
"
from feedback I have for previous commit it seems that many people prefer
to avoid mass code change needed for current standard compliance
and prefer to track unpublished standard instead, which requires now
that free() itself must save errno, not its usage code.
So, I back out "save errno across free()" part of previous commit,
and will fill PR for changing free() isntead.
2) Remove now unused serrno.
MFC after: 1 week
"The setting of errno after a successful call to a function is
unspecified unless the description of that function specifies that
errno shall not be modified."
However, free() in IEEE Std 1003.1-2008 does not mention its interaction
with errno, so MAY modify it after successful call
(it depends on particular free() implementation, OS-specific, etc.).
So, save errno across free() calls to make code portable and
POSIX-conformant.
2) Remove unused serrno assignment.
MFC after: 1 week
The stat structures returned on pipes seems to contain all the
information required by POSIX. Especially the wording "and thus to a
pipe" makes little sense, because it seems to imply a certain
relationship between sockets and pipes that simply isn't there.
MFC after: 2 weeks
(not verified by me to be accurate)
PR: bin/163847
Submitted by: Gabor Fischer <Gabor.Fischer@gmx.net>
Reviewed by: bp
Approved by: cperciva
MFC after: 3 weeks
