Commit Graph

485 Commits

Author SHA1 Message Date
Monthadar Al Jaberi
8904a305ae Mark a mesh path to a mesh gate with a 'G'.
Approved by:	adrian (mentor)
2013-02-07 21:23:03 +00:00
Hajimu UMEMOTO
164051cea5 Add no_prefer_iface option.
It stops treating the address on the interface as special by source
address selection rule even when the interface is outgoing interface.
This is desired in some situation.

Requested by:	hrs
Reviewed by:	IHANet folks including hrs
MFC after:	1 week
2013-01-09 18:18:08 +00:00
Kevin Lo
a5752d55e0 Fix socket calls on error post-r243965.
Submitted by:	Garrett Cooper
2012-12-21 15:54:13 +00:00
Hiroki Sato
5c9fa630f6 - Fix LOR in sa6_recoverscope() in rt_msg2()[1].
- Check V_deembed_scopeid before checking if sa_family == AF_INET6.
- Fix scope id handing in route(8)[2] and ifconfig(8).

Reported by:	rpaulo[1], Mateusz Guzik[1], peter[2]
2012-12-04 17:12:23 +00:00
Hiroki Sato
6bbfef9004 Fill sin6_scope_id in sockaddr_in6 before passing it from the kernel to
userland via routing socket or sysctl.  This eliminates the following
KAME-specific sin6_scope_id handling routine from each userland utility:

 sin6.sin6_scope_id = ntohs(*(u_int16_t *)&sin6.sin6_addr.s6_addr[2]);

This behavior can be controlled by net.inet6.ip6.deembed_scopeid.  This is
set to 1 by default (sin6_scope_id will be filled in the kernel).

Reviewed by:	bz
2012-11-17 20:19:00 +00:00
Warren Block
57ce4667a1 Actually change "silent" to "silence" this time (reviewed by adri@).
MFC after:	1 week
2012-11-07 19:32:21 +00:00
Warren Block
818b39ed9e Remove fifteen-year-old notes on media selection (suggested by simon@).
Add commas after "e.g." and "i.e.".  Change "silent" to "silence" in
wireless create section (reviewed by adri@).

MFC after:	1 week
2012-11-07 19:26:32 +00:00
Warren Block
fd9635ef7a Add devd.conf(5) and devd(8) to SEE ALSO xrefs. Give users a pointer to
seemingly mysterious actions that are not done by ifconfig itself, but
by devd triggering on events caused by ifconfig.

PR:		docs/173405
Submitted by:	Mateusz Kwiatkowski <mateusz.kwiatkowski@atlashost.eu>
MFC after:	1 week
2012-11-07 15:59:24 +00:00
Hiroki Sato
f6c336fe66 Remove "prefer_source" address selection option. FreeBSD has had an
implementation of RFC 3484 for this purpose for a long time and "prefer_source"
was never implemented actually.  ND6_IFF_PREFER_SOURCE macro is left intact.
2012-07-09 06:21:46 +00:00
Navdeep Parhar
09fe63205c - Updated TOE support in the kernel.
- Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs.
  These are available as t3_tom and t4_tom modules that augment cxgb(4)
  and cxgbe(4) respectively.  The cxgb/cxgbe drivers continue to work as
  usual with or without these extra features.

- iWARP driver for Terminator 3 ASIC (kernel verbs).  T4 iWARP in the
  works and will follow soon.

Build-tested with make universe.

30s overview
============
What interfaces support TCP offload?  Look for TOE4 and/or TOE6 in the
capabilities of an interface:
# ifconfig -m | grep TOE

Enable/disable TCP offload on an interface (just like any other ifnet
capability):
# ifconfig cxgbe0 toe
# ifconfig cxgbe0 -toe

Which connections are offloaded?  Look for toe4 and/or toe6 in the
output of netstat and sockstat:
# netstat -np tcp | grep toe
# sockstat -46c | grep toe

Reviewed by:	bz, gnn
Sponsored by:	Chelsio communications.
MFC after:	~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
Joel Dahl
a4dec862ed Remove repeated words. 2012-06-05 18:19:52 +00:00
Eygene Ryabinkin
f74d5a7a20 if_lagg: allow to invoke SIOCSLAGGPORT multiple times in a row
Currently, 'ifconfig laggX down' does not remove members from this
lagg(4) interface.  So, 'service netif stop laggX' followed by
'service netif start laggX' will choke, because "stop" will leave
interfaces attached to the laggX and ifconfig from the "start" will
refuse to add already-existing interfaces.

The real-world case is when I am bundling together my Ethernet and
WiFi interfaces and using multiple profiles for accessing network in
different places: system being booted up with one profile, but later
this profile being exchanged to another one, followed by 'service
netif restart' will not add WiFi interface back to the lagg: the
"stop" action from 'service netif restart' will shut down my main WiFi
interface, so wlan0 that exists in the lagg0 will be destroyed and
purged from lagg0; the "start" action will try to re-add both
interfaces, but since Ethernet one is already in lagg0, ifconfig will
refuse to add the wlan0 from WiFi interface.

Since adding the interface to the lagg(4) when it is already here
should be an idempotent action: we're really not changing anything,
so this fix doesn't change the semantics of interface addition.

Approved by: thompsa
Reviewed by: emaste
MFC after: 1 week
2012-05-28 12:13:04 +00:00
Bjoern A. Zeeb
cf7aca24f7 Removed the IFCAP_ prefix when printing the IPv6 checksum capabilities.
Submitted by:	dim
MFC after:	3 days
2012-05-28 10:45:51 +00:00
Bjoern A. Zeeb
356ab07e2d It turns out that too many drivers are not only parsing the L2/3/4
headers for TSO but also for generic checksum offloading.  Ideally we
would only have one common function shared amongst all drivers, and
perhaps when updating them for IPv6 we should introduce that.
Eventually we should provide the meta information along with mbufs to
avoid (re-)parsing entirely.

To not break IPv6 (checksums and offload) and to be able to MFC the
changes without risking to hurt 3rd party drivers, duplicate the v4
framework, as other OSes have done as well.

Introduce interface capability flags for TX/RX checksum offload with
IPv6, to allow independent toggling (where possible).  Add CSUM_*_IPV6
flags for UDP/TCP over IPv6, and reserve further for SCTP, and IPv6
fragmentation.  Define CSUM_DELAY_DATA_IPV6 as we do for legacy IP and
add an alias for CSUM_DATA_VALID_IPV6.

This pretty much brings IPv6 handling in line with IPv4.
TSO is still handled in a different way and not via if_hwassist.

Update ifconfig to allow (un)setting of the new capability flags.
Update loopback to announce the new capabilities and if_hwassist flags.

Individual driver updates will have to follow, as will SCTP.

Reported by:	gallatin, dim, ..
Reviewed by:	gallatin (glanced at?)
MFC after:	3 days
X-MFC with:	r235961,235959,235958
2012-05-28 09:30:13 +00:00
Bjoern A. Zeeb
1623284fab MFp4 bz_ipv6_fast:
Allow tso4 and tso6 be set individually given we have the bits.
  This will help with drivers not working as expected during the
  transition time and later.

  Sponsored by:	The FreeBSD Foundation
  Sponsored by:	iXsystems

Reviewed by:	gnn
MFC After:	1 week
2012-05-19 23:25:57 +00:00
Hiroki Sato
8a3beec66e Skip nd6 line with no warning message when the system does not support
INET6.

Spotted by:	flo
2012-05-11 20:01:45 +00:00
Monthadar Al Jaberi
0c50c8eea5 Update man page date to the date of the last commit.
Approved by: adrian
2012-05-02 20:01:28 +00:00
Monthadar Al Jaberi
35fc27d27e * Modified ifconfig to show the IEEE80211_MESHRT_FLAGS_DISCOVER flag with a 'D';
Approved by: adrian
2012-05-01 16:17:17 +00:00
Monthadar Al Jaberi
e6e06eb824 * Added new command to ifconfig to activate Mesh Gate Announcement called
meshgate with corresponding explanation;

Approved by: adrian
2012-05-01 16:15:34 +00:00
Joel Dahl
e346e89c45 Remove end of line whitespace introduced in previous commit. 2012-04-07 09:11:07 +00:00
Gleb Smirnoff
79f6687df0 Document syncdev, syncpeer and defer keywords for
pfsync(4) interfaces.
2012-04-03 18:11:30 +00:00
Gleb Smirnoff
74e9ff6519 Make it possible to switch pfsync(4) deferral mechanism on/off.
Obtained from:	OpenBSD
2012-04-03 18:10:48 +00:00
Eitan Adler
50d675f7a9 Remove trailing whitespace per mdoc lint warning
Disussed with:	gavin
No objection from:	doc
Approved by:	joel
MFC after:	3 days
2012-03-29 05:02:12 +00:00
Bernhard Schmidt
4b25863e5c Also fix the parameter usage in set80211meshpeering().
Submitted by:	Monthadar Al Jaberi
MFC after:	1 week
X-MFC after:	r233328
2012-03-23 18:12:25 +00:00
Adrian Chadd
bde65615f6 Fix an incorrect parameter usage here.
Submitted by:	monthadar@gmail.com
2012-03-22 21:22:58 +00:00
Andrew Thompson
a0778b71ad Fix typo and bump the document date which I also forgot.
Spotted by:	Andrey Zonov
2012-03-07 06:25:17 +00:00
Andrew Thompson
86f67641a9 Add the ability to set which packet layers are used for the load balance hash
calculation.
2012-03-06 22:58:13 +00:00
Christian Brueffer
5640c37256 Update bridge(4) default values.
PR:		164564
Submitted by:	"Rudy (bulk)" <crapsh@monkeybrains.net>
MFC after:	2 weeks
2012-02-29 21:11:02 +00:00
Gavin Atkinson
1748d1e513 Correct capitalization of "Hz" in user-visible text (manpages, printf(),
etc).

MFC after:	3 days
2012-02-28 13:19:34 +00:00
Robert Millan
9697f9f801 Disable jail support in ifconfig when either building a rescue
image or MK_JAIL knob has been set to "no".

Reviewed by:	bz
Approved by:	adrian (mentor)
2012-02-14 07:14:42 +00:00
Eitan Adler
83d26a13ba Fix warning when compiling with gcc46:
error: variable 'firstkey' set but not used

Approved by:	dim
MFC after:	3 days
2012-01-10 02:59:18 +00:00
Ulrich Spörlein
4b85a12f71 Spelling fixes for sbin/ 2012-01-07 16:09:33 +00:00
Robert Watson
f3f28e69a7 Adjust the VLAN section of the ifconfig(8) man page to better reflect
reality:

1. Only 12-bit VLAN Identifiers, not full 16-bit VLAN tags can be set using
   ifconfig vlan.

2. When we mean VLAN Identifiers, spell it that way, rather than as VLAN tag.

MFC after:	3 days
Sponsored by:	Adara Networks, Inc.
2012-01-04 21:04:57 +00:00
Bjoern A. Zeeb
9b776960c3 Allow toggling of IFCAP_VLAN_HWCSUM for hardware that supports checksum
offloading on vlans and document the new option.

MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2011-12-17 15:44:34 +00:00
Gleb Smirnoff
5f02482794 Rename ifcarp.c to carp.c 2011-12-16 14:30:58 +00:00
Gleb Smirnoff
92ed4e1a24 Since size of struct in_aliasreq has just been changed in r228571,
and thus ifconfig(8) needs recompile, it is a good chance to make
parameter checks on SIOCAIFADDR arguments more strict.
2011-12-16 13:30:17 +00:00
Gleb Smirnoff
08b68b0e4c A major overhaul of the CARP implementation. The ip_carp.c was started
from scratch, copying needed functionality from the old implemenation
on demand, with a thorough review of all code. The main change is that
interface layer has been removed from the CARP. Now redundant addresses
are configured exactly on the interfaces, they run on.

The CARP configuration itself is, as before, configured and read via
SIOCSVH/SIOCGVH ioctls. A new prefix created with SIOCAIFADDR or
SIOCAIFADDR_IN6 may now be configured to a particular virtual host id,
which makes the prefix redundant.

ifconfig(8) semantics has been changed too: now one doesn't need
to clone carpXX interface, he/she should directly configure a vhid
on a Ethernet interface.

To supply vhid data from the kernel to an application the getifaddrs(8)
function had been changed to pass ifam_data with each address. [1]

The new implementation definitely closes all PRs related to carp(4)
being an interface, and may close several others. It also allows
to run a single redundant IP per interface.

Big thanks to Bjoern Zeeb for his help with inet6 part of patch, for
idea on using ifam_data and for several rounds of reviewing!

PR:		kern/117000, kern/126945, kern/126714, kern/120130, kern/117448
Reviewed by:	bz
Submitted by:	bz [1]
2011-12-16 12:16:56 +00:00
Gleb Smirnoff
8d7813e7e9 For unknown reason, since rev 1.1 of ifconfig.c, sin_family isn't
set properly for the mask argument.

Since I'd like to improve argument sanity checking in kernel
side, in in_control(), fix this.
2011-11-19 19:06:08 +00:00
Adrian Chadd
fab8a49218 Bump date. 2011-11-12 23:30:57 +00:00
Adrian Chadd
6edc611e9d Add documentation for the new quiet time IE options.
Submitted by:	Himali Patel <himali.patel@sibridgetech.com>
Sponsored by:	Sibridge Technologies
2011-11-12 23:17:01 +00:00
Adrian Chadd
dd21aaf873 Add quiet time element configuration support to ifconfig.
This allows a hostap to specify to a set of stations that they
should not transmit for a certain period of time after each
beacon interval has expired. This is used when searching for
radar pulses or general interference.

Submitted by:	Himali Patel <himali.patel@sibridgetech.com>
Sponsored by:	Sibridge Technologies
2011-11-08 14:22:40 +00:00
Hiroki Sato
5ed6597742 - Document inet6 no_radr flag.
- Add descriptions of sysctl(8) variables which can control the default
  configuration of the inet6 flags.

Approved by:	re (kib)
2011-09-19 16:01:53 +00:00
Adrian Chadd
2168aaa506 This patch removes a check in ifconfig which disables HT/40 channels
on frequency bands with DFS. All Atheros chipsets >= AR9001 support
radar event detection on HT40 extension channels.

This should be a chipset specific item rather than enforced in the
regulatory domain database.

In addition, it's irrelevant for STA mode, as the radar detection is
done by the access point, not the STA.

Approved by:	re (kib)
2011-07-20 05:59:28 +00:00
Adrian Chadd
2ad10b365c This patch enables listing DFS related flags when 'ifconfig -v wlanX
list channel' is run. The following new options are introduced:

* D: channel requires DFS
* R: channel has a radar event
* I: channel has detected inteference
* C: the CAC period has completed on a channel that requires it (ie,
  DFS + PASSIVE.)

It's relevant for developing, debugging and using the DFS and
interference options.

Approved by:	re (bz)
2011-07-19 15:22:35 +00:00
Bjoern A. Zeeb
ad2571a225 If compiling RESCUE always ignore feature_present(3) calls so that
a /rescue/ifconfig more modern than the kernel could still configure
IPv4 or IPv6 addresses.

Reported by:	Andrzej Tobola (ato iem.pw.edu.pl)
Reported by:	gcooper
MFC after:	1 day
X-MFC:		will not MFC any time soon, just reminder for r222527
2011-07-18 10:29:16 +00:00
Bjoern A. Zeeb
35fd7bc020 Add infrastructure to allow all frames/packets received on an interface
to be assigned to a non-default FIB instance.

You may need to recompile world or ports due to the change of struct ifnet.

Submitted by:	cjsp
Submitted by:	Alexander V. Chernikov (melifaro ipfw.ru)
		(original versions)
Reviewed by:	julian
Reviewed by:	Alexander V. Chernikov (melifaro ipfw.ru)
MFC after:	2 weeks
X-MFC:		use spare in struct ifnet
2011-07-03 12:22:02 +00:00
Luigi Rizzo
c9d658e9f7 Grab one of the ifcap bits for netmap, and enable printing in ifconfig.
Document the fact that we might want an IFCAP_CANTCHANGE mask,
even though the value is not yet used in sys/net/if.c

(asked on -current a week ago, no feedback so i assume no objection).
2011-06-14 12:40:55 +00:00
Hiroki Sato
e7fa8d0ada - Accept Router Advertisement messages even when net.inet6.ip6.forwarding=1.
- A new per-interface knob IFF_ND6_NO_RADR and sysctl IPV6CTL_NO_RADR.
  This controls if accepting a route in an RA message as the default route.
  The default value for each interface can be set by net.inet6.ip6.no_radr.
  The system wide default value is 0.

- A new sysctl: net.inet6.ip6.norbit_raif.  This controls if setting R-bit in
  NA on RA accepting interfaces.  The default is 0 (R-bit is set based on
  net.inet6.ip6.forwarding).

Background:

 IPv6 host/router model suggests a router sends an RA and a host accepts it for
 router discovery.  Because of that, KAME implementation does not allow
 accepting RAs when net.inet6.ip6.forwarding=1.  Accepting RAs on a router can
 make the routing table confused since it can change the default router
 unintentionally.

 However, in practice there are cases where we cannot distinguish a host from
 a router clearly.  For example, a customer edge router often works as a host
 against the ISP, and as a router against the LAN at the same time.  Another
 example is a complex network configurations like an L2TP tunnel for IPv6
 connection to Internet over an Ethernet link with another native IPv6 subnet.
 In this case, the physical interface for the native IPv6 subnet works as a
 host, and the pseudo-interface for L2TP works as the default IP forwarding
 route.

Problem:

 Disabling processing RA messages when net.inet6.ip6.forwarding=1 and
 accepting them when net.inet6.ip6.forward=0 cause the following practical
 issues:

 - A router cannot perform SLAAC.  It becomes a problem if a box has
   multiple interfaces and you want to use SLAAC on some of them, for
   example.  A customer edge router for IPv6 Internet access service
   using an IPv6-over-IPv6 tunnel sometimes needs SLAAC on the
   physical interface for administration purpose; updating firmware
   and so on (link-local addresses can be used there, but GUAs by
   SLAAC are often used for scalability).

 - When a host has multiple IPv6 interfaces and it receives multiple RAs on
   them, controlling the default route is difficult.  Router preferences
   defined in RFC 4191 works only when the routers on the links are
   under your control.

Details of Implementation Changes:

 Router Advertisement messages will be accepted even when
 net.inet6.ip6.forwarding=1.  More precisely, the conditions are as
 follow:

 (ACCEPT_RTADV && !NO_RADR && !ip6.forwarding)
	=> Normal RA processing on that interface. (as IPv6 host)

 (ACCEPT_RTADV && (NO_RADR || ip6.forwarding))
	=> Accept RA but add the router to the defroute list with
	   rtlifetime=0 unconditionally.  This effectively prevents
	   from setting the received router address as the box's
	   default route.

 (!ACCEPT_RTADV)
	=> No RA processing on that interface.

 ACCEPT_RTADV and NO_RADR are per-interface knob.  In short, all interface
 are classified as "RA-accepting" or not.  An RA-accepting interface always
 processes RA messages regardless of ip6.forwarding.  The difference caused by
 NO_RADR or ip6.forwarding is whether the RA source address is considered as
 the default router or not.

 R-bit in NA on the RA accepting interfaces is set based on
 net.inet6.ip6.forwarding.  While RFC 6204 W-1 rule (for CPE case) suggests
 a router should disable the R-bit completely even when the box has
 net.inet6.ip6.forwarding=1, I believe there is no technical reason with
 doing so.  This behavior can be set by a new sysctl net.inet6.ip6.norbit_raif
 (the default is 0).

Usage:

 # ifconfig fxp0 inet6 accept_rtadv
	=> accept RA on fxp0
 # ifconfig fxp0 inet6 accept_rtadv no_radr
	=> accept RA on fxp0 but ignore default route information in it.
 # sysctl net.inet6.ip6.norbit_no_radr=1
	=> R-bit in NAs on RA accepting interfaces will always be set to 0.
2011-06-06 02:14:23 +00:00
Hiroki Sato
c3cc3217bc Add the "nd6 options" line handler as af_other_status() of AF_INET6, not as an
own address family.

Reviewed by:	bz
2011-06-05 11:37:20 +00:00
Bjoern A. Zeeb
5af3fa9a5f Conditionally compile in the af_inet and af_inet6, af_nd6 modules.
If compiled in for dual-stack use, test with feature_present(3)
to see if we should register the IPv4/IPv6 address family related
options.

In case there is no "inet" support we would love to go with the
usage() and make the address family mandatory (as it is for anything
but inet in theory).  Unfortunately people are used to
  ifconfig IF up/down
etc. as well, so use a fallback of "link".  Adjust the man page
to reflect these minor details.

Improve error handling printing a warning in addition to the usage
telling that we do not know the given address family in two places.

Reviewed by:	hrs, rwatson
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC after:	2 weeks
2011-05-31 14:40:21 +00:00