Commit Graph

285 Commits

Author SHA1 Message Date
Nathan Whitehorn
c3e289e1ce MFppc64:
Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kernel configurations must be
updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
Rafal Jaworowski
d1d3233ebd Convert Freescale PowerPC platforms to FDT convention.
The following systems are affected:

  - MPC8555CDS
  - MPC8572DS

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Freescale MPC85XX SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC,
    QUICC, UART, CFI.

  - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire
    ocpbus(4) driver, which was based on hard-coded config data.

Note that world for these platforms has to be built WITH_FDT.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
Wojciech A. Koszek
332fd25c96 Revert config(8) version bump. It brings major pain for people working on
different versions of FreeBSD source tree.

Old config(8) can now be used unless you want to use INCLUDE_CONFIG_FILE
option.

Approved by:	imp
Reviewed by:	imp
2007-05-16 17:23:54 +00:00
Wojciech A. Koszek
9e2f7513e1 Bump config(8) version and build requirement for config(8) to 600006. This
is caused by my latest changes to config(8). You're supposed to install new
config(8) in order to prevent yourself from seeing a warning about old
version of that tool.

You should configure the kernel with a new config(8) then.

Oked by:	rwatson, cognet (mentor)
2007-05-13 02:36:41 +00:00
Warner Losh
9fe342e741 Version 600004 is better than 700000 given other changes that are in
the pipeline.  We had to bump the version for 600004 because the old
parser got confused and generated bogus output.

Approved by: ru@
2005-11-28 17:51:31 +00:00
Ruslan Ermilov
a8e06f2a52 Make config(8) understand ORed dependecies in "files*" and
improve tracking of known devices.  Bump config(8) version.
2005-11-27 21:41:58 +00:00
Warner Losh
05b5ca733b We don't bump the config version for additions to config that aren't
used in the base system.  This has been much discussed in the past
(typically people giving me a hard time for it).  Since all that was
added to config was nocpu, and since we don't use it, we don't need to
bump the version.
2005-11-04 04:14:49 +00:00
Ruslan Ermilov
acd58322c7 Implement the "nocpu" directive.
Requested by:	rwatson
2005-11-03 14:01:22 +00:00
John Baldwin
b34b3c19c6 Bump config(8) version for the DEFAULTS change. 2005-10-27 19:27:55 +00:00
David E. O'Brien
a7d30e5ffb Use the more readable empty() syntax. 2005-09-07 17:38:46 +00:00
Warner Losh
23804f1a7d Never hardcode /sys into these Makefiles. The proper way to spell it is $S.
Also, move the -I stuff to the centralized kern.pre.mk.  However, it
might be better to add these flags to files.conf.  This is a short
term fix to fix the broken builds on my machine (I don't have a valid
/sys link).
2005-04-13 14:49:57 +00:00
Vinod Kashyap
f0c1dee27f The latest release of the FreeBSD driver (twa) for
3ware's 9xxx series controllers.  This corresponds to
the 9.2 release (for FreeBSD 5.2.1) on the 3ware website.

Highlights of this release are:

1. The driver has been re-architected to use a "Common Layer"
    (all tw_cl* files), which is a consolidation of all OS-independent
    parts of the driver.  The FreeBSD OS specific portions of the
    driver go into an "OS Layer" (all tw_osl* files).
    This re-architecture is to achieve better maintainability, consistency
    of behavior across OS's, and better portability to new OS's (drivers
    for new OS's can be written by just adding an OS Layer that's specific
    to the OS, by complying to a "Common Layer Programming Interface" API.

2. The driver takes advantage of multiple processors.

3. The driver has a new firmware image bundled, the new features of which
   include Online Capacity Expansion and multi-lun support, among others.
   More details about 3ware's 9.2 release can be found here:
   http://www.3ware.com/download/Escalade9000Series/9.2/9.2_Release_Notes_Web.pdf

Since the Common Layer is used across OS's, the FreeBSD specific include
path for header files (/sys/dev/twa) is not part of the #include pre-processor
directive in any of the source files.  For being able to integrate twa into
the kernel despite this, Makefile.<arch> has been changed to add the include
path to CFLAGS.

Reviewed by: scottl
2005-04-12 22:07:11 +00:00
Warner Losh
5abe8537a0 Update version number for latest config version bump 2005-04-01 22:56:10 +00:00
John-Mark Gurney
f80d282814 bump the Makefile config versions now that config is 600001...
Forgotten by:	des
2005-02-10 21:15:31 +00:00
Peter Grehan
bd985cab34 - remove NO_MODULES since they've been working for some time
- add -fno-omit-framepointer to CFLAGS if DDB is enabled so
  backtraces will still work when optimization is enabled.
  Stolen from Makefile.amd64.
2005-02-03 06:28:17 +00:00
Ruslan Ermilov
a35d88931c For variables that are only checked with defined(), don't provide
any fake value.
2004-10-24 15:33:08 +00:00
Peter Wemm
f37a929ca1 Kill count device support from config. I've changed the last few
remaining consumers to have the count passed as an option.  This is
i4b, pc98/wdc, and coda.

Bump configvers.h from 500013 to 600000.

Remove heuristics that tried to parse "device ed5" as 5 units of the ed
device.  This broke things like the snd_emu10k1 device, which required
quotes to make it parse right.  The no-longer-needed quotes have been
removed from NOTES, GENERIC etc.  eg, I've removed the quotes from:
   device  snd_maestro
   device  "snd_maestro3"
   device  snd_mss

I believe everything will still compile and work after this.
2004-08-30 23:03:58 +00:00
Ruslan Ermilov
48aea4da66 Removed COPTS support from kmod.mk and kern.pre.mk.
COPTS support in bsd.prog.mk is preserved but discouraged.
2004-08-13 14:30:26 +00:00
Olivier Houchard
5090c98711 Change required config(8) version. 2004-05-09 22:29:38 +00:00
Andrew Gallatin
721bdb8d39 Remove duplicate script for locore.o 2003-12-09 15:48:20 +00:00
Poul-Henning Kamp
18b492fc8c Bump the config version to force people to upgrade their config(8)
so the fix for emitting multiple instances of .o files will prevent
link errors on LINT.
2003-04-15 21:29:11 +00:00
Ruslan Ermilov
5d1b6a85bc Standardize handling of locore.[sS] etc. files.
Submitted by:	jake, bde, ru
2003-02-28 21:59:14 +00:00
Peter Grehan
731df24777 - remove dead conditional CFLAG setting
- switch locore .s -> .S

Approved by:  benno
2003-01-22 01:34:10 +00:00
Peter Wemm
66422f5b7a Initiate deorbit burn for the i386-only a.out related support. Moves are
under way to move the remnants of the a.out toolchain to ports.  As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL.  It has already lasted WAY beyond
that.

Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.

Tested on: i386 (extensively), alpha
2002-09-17 01:49:00 +00:00
Jake Burkholder
ba37958b34 Moved the rule for locore.o from kern.post.mk to Makefile.$ARCH. 2002-07-31 14:59:05 +00:00
Bruce Evans
8365569883 Moved the setting of all profiling-related variables except the key one
(PROFLEVEL) to kern.pre.mk so that it is easier to manage.  Bumped config
version to match.

Moved the check for cputype being configured to a less bogus place in
mkmakefile.c.
2002-07-13 19:36:14 +00:00
David E. O'Brien
25a157bc6c Remove the setting of 'FMT'. We now do ELF by default, so only bother
to increase the lenght of the command line if needed.  The setting of FMT
also gets in the cross bootstrapping way for new platforms.
2002-03-24 17:45:46 +00:00
Peter Wemm
7a2eb19dbf Commit some infrastructure for turning on -Werror for kernel compiles.
It doesn't actually do it yet though.  This adds a flag to config so
that we can exclude certain vendor files from this even when the rest
of the kernel has it on.  make -DNO_WERROR would also bypass all of it.
2002-02-20 23:35:56 +00:00
Peter Wemm
f6916f666c Proper fix for old config setting maxusers to 8. 2001-12-14 09:39:29 +00:00
Benno Rice
2c6c884048 -msoft-float must always be turned on when compiling the PowerPC kernel. 2001-11-12 10:12:00 +00:00
Warner Losh
3dfff24a19 Move kern.post.mk to last line, now that it appears safe 2001-11-11 20:33:02 +00:00
Warner Losh
41c8eb3039 Factor the common parts of the Makefile.foo files. This introduces two
new files: kern.pre.mk, which contains most of the definitions, and
kern.post.mk, which contains most of the rules.

I've tested this on i386 and pc98.  I have had feedback on the sparc64
port, but no reports from anybody on alpha, ia64 or powerpc.  I
appologize in advance if I've broken you.

Reviewed by: jake, jhb, arch@
2001-11-02 21:34:20 +00:00
Brian Somers
143281f43c Only overwrite ${DESTDIR}${KODIR}.old/${KERNEL_KO} if we haven't
booted from it when doing an installkernel.

Only change kern.bootfile from ${DESTDIR}${KODIR}/${KERNEL_KO}
to ${DESTDIR}${KODIR}.old/${KERNEL_KO}, and only when we're renaming
a booted ${DESTDIR}${KODIR}/${KERNEL_KO} kernel.
2001-11-01 02:17:49 +00:00
Dag-Erling Smørgrav
a4c0058691 Support the "install.debug" and "reinstall.debug" targets for kernel modules.
Small tweaks to kldxref may be necessary to avoid the surprising (but harm-
less) behaviour of 'kldload foo' loading foo.ko.debug instead of foo.ko if
it is present in the kernel directory.

Approved by:	a week of silence on -arch
MFC after:	2 weeks
2001-10-27 00:52:50 +00:00
Ruslan Ermilov
0df659af99 Finish the asbestos suited move of $mach/conf/*.$mach to conf/*.$mach.
Fix some more typos.
2001-10-26 10:33:45 +00:00
Mark Peek
43aba0eadb Make override of nm consistent across all platforms and sort the overrides.
Reminded by:	obrien
2001-10-19 22:19:06 +00:00
Mark Peek
acd26a4b7a Use normal CWARNFLAGS and defines when compiling on FreeBSD. 2001-10-19 00:32:00 +00:00
Brian Somers
9082264160 Change kern.bootfile when mv'ing the kernel
Not tested by: brian
2001-10-17 18:04:13 +00:00
Benno Rice
7947a33926 Remove another unneeded instance of -elf. 2001-10-14 06:02:16 +00:00
Mark Peek
c538331d7a Changes for both compilation on NetBSD (PPC) and cross-compilation on FreeBSD.
- Hardcode and trim warning flags down to compatible subset.
- Remove -elf FMT flag.
- Allow for NM commandline override.
2001-10-13 19:57:28 +00:00
Peter Wemm
76cb0cadf1 Enable hardwiring of things like tunables from embedded enironments
that do not start from loader(8).
2001-08-27 05:11:53 +00:00
Peter Wemm
dd84e9658b In order to bring about the end of the universe, delete the lines:
# DO NOT DELETE THIS LINE -- make depend uses it
2001-08-15 00:33:55 +00:00
Peter Wemm
5635f2a580 Further Makefile.* sync (from Makefile.ia64). The lint target has been
commented out in the entire life of the 2.x+ branch and given the amount
of gcc-specific code we have and the warning checks that gcc does I'm not
sure that it is going to get us much for some time.
2001-08-03 00:07:54 +00:00
Sheldon Hearn
2cc33d7946 When building a debugging kernel with modules, build modules with
debugging support as well.

This relies on support added in rev 1.105 to kmod.mk.

Requested by:	peter
2001-08-02 10:56:59 +00:00
Peter Wemm
18ec8d761c param.c no longer gets special treatment. Use the source tree version. 2001-07-26 23:04:46 +00:00
Warner Losh
ab11128f3e Bump config version. 2001-07-02 05:36:32 +00:00
Warner Losh
7ef33e2e39 Move kernel compile directory from sys/compile/FOO to
sys/compile/${MACHINE}/FOO.

Reviewed by: arch, obrien, peter and
	the USENIX terminal room secret kernel cabal
2001-06-30 06:29:47 +00:00
Benno Rice
00267919e1 Add -msoft-float to COPTS to stop GCC attempting to be "smart" and using
floating point registers for various optimisation tweaks.
2001-06-27 12:10:25 +00:00
Benno Rice
c585bae1c2 The final commit for the first phase of PowerPC support.
This adds the config stuff needed to build kernels.

Reviewed by:	obrien
2001-06-17 09:39:44 +00:00
Peter Wemm
f41325db5f With this commit, I hereby pronounce gensetdefs past its use-by date.
Replace the a.out emulation of 'struct linker_set' with something
a little more flexible.  <sys/linker_set.h> now provides macros for
accessing elements and completely hides the implementation.

The linker_set.h macros have been on the back burner in various
forms since 1998 and has ideas and code from Mike Smith (SET_FOREACH()),
John Polstra (ELF clue) and myself (cleaned up API and the conversion
of the rest of the kernel to use it).

The macros declare a strongly typed set.  They return elements with the
type that you declare the set with, rather than a generic void *.

For ELF, we use the magic ld symbols (__start_<setname> and
__stop_<setname>).  Thanks to Richard Henderson <rth@redhat.com> for the
trick about how to force ld to provide them for kld's.

For a.out, we use the old linker_set struct.

NOTE: the item lists are no longer null terminated.  This is why
the code impact is high in certain areas.

The runtime linker has a new method to find the linker set
boundaries depending on which backend format is in use.

linker sets are still module/kld unfriendly and should never be used
for anything that may be modular one day.

Reviewed by:	eivind
2001-06-13 10:58:39 +00:00