Commit Graph

19 Commits

Author SHA1 Message Date
Attilio Rao
9c170fd168 Disable the option VFS_ALLOW_NONMPSAFE by default on all the supported
platforms.
This will make every attempt to mount a non-mpsafe filesystem to the
kernel forbidden, unless it is expressely compiled with
VFS_ALLOW_NONMPSAFE option.

This patch is part of the effort of killing non-MPSAFE filesystems
from the tree.

No MFC is expected for this patch.
2012-03-06 20:01:25 +00:00
Attilio Rao
ed1f6dc235 Introduce the option VFS_ALLOW_NONMPSAFE and turn it on by default on
all the architectures.
The option allows to mount non-MPSAFE filesystem. Without it, the
kernel will refuse to mount a non-MPSAFE filesytem.

This patch is part of the effort of killing non-MPSAFE filesystems
from the tree.

No MFC is expected for this patch.

Tested by:	gianni
Reviewed by:	kib
2011-11-08 10:18:07 +00:00
Marius Strobl
2ab9ab1ffe Actually enable NEW_PCIB by default, missed in r225931. 2011-10-02 23:31:14 +00:00
Marius Strobl
bda8e754a1 Make sparc64 compatible with NEW_PCIB and enable it:
- Implement bus_adjust_resource() methods as far as necessary and in non-PCI
  bridge drivers as far as feasible without rototilling them.
- As NEW_PCIB does a layering violation by activating resources at layers
  above pci(4) without previously bubbling up their allocation there, move
  the assignment of bus tags and handles from the bus_alloc_resource() to
  the bus_activate_resource() methods like at least the other NEW_PCIB
  enabled architectures do. This is somewhat unfortunate as previously
  sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY
  resources should be mapped into KVA, which is only necessary if their
  going to be accessed via the pointer returned from rman_get_virtual() but
  not for bus_space(9) as the later always uses physical access on sparc64.
  Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver
  also may deliberately not map them in if the firmware already has done so,
  possibly in a special way. So in order to still allow a driver to decide
  whether a SYS_RES_MEMORY resource should be mapped into KVA we let it
  indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as
  actually documented in the bus_space(9) page. This is implemented by
  allocating a separate bus tag per SYS_RES_MEMORY resource and passing the
  resource via the previously unused bus tag cookie so we later on can call
  rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now
  also allows to actually indicate that a SYS_RES_MEMORY resource should be
  mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and
  BUS_SPACE_MAP_READONLY respectively.
- Do some minor cleanup like taking advantage of rman_init_from_resource(),
  factor out the common part of bus tag allocation into a newly added
  sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace
  some homegrown versions with the generic counterparts etc.
- While at it, let apb_attach() (which can't use the generic NEW_PCIB code
  as APB bridges just don't have the base and limit registers implemented)
  regarding the config space registers cached in pcib_softc and the SYSCTL
  reporting nodes set up.
2011-10-02 23:22:38 +00:00
Warner Losh
56eff2143f Revert 200594. This file isn't intended for these sorts of things. 2010-01-04 21:30:04 +00:00
Doug Barton
f1bdf073c1 Add INCLUDE_CONFIG_FILE, and a note in comments about how to also
include the comments with CONFIGARGS
2009-12-16 02:17:43 +00:00
Marcel Moolenaar
05002c354b Make gpart the default partitioning class on all platforms.
Both ia64 and powerpc were using gpart exclusively already
so there's no change for those two.

Discussed on: arch@
2008-12-17 17:43:22 +00:00
Jeff Roberson
6617724c5f Remove kernel support for M:N threading.
While the KSE project was quite successful in bringing threading to
FreeBSD, the M:N approach taken by the kse library was never developed
to its full potential.  Backwards compatibility will be provided via
libmap.conf for dynamically linked binaries and static binaries will
be broken.
2008-03-12 10:12:01 +00:00
Marius Strobl
e393af8462 Let sunkbd(4) emulate an AT keyboard by default.
This has the following benefits:
- allows to use the AT keyboard maps in share/syscons/keymaps with
  sunkbd(4),
- allows to use kbdmux(4) with sunkbd(4),
- allows Sun RS232 keyboards to be configured and used the same
  way as Sun USB keyboards driven by ukbd(4) (which also does AT
  keyboard emulation) with X.Org, putting an end to the problem
  of native support for the former in X.Org being broken over and
  over again.

MFC after:	3 days
2007-11-18 18:11:16 +00:00
Marcel Moolenaar
2b39bb4f4f Use default options for default partitioning schemes, rather than
making the relevant files standard. This avoids duplication and
makes it easier to override/disable unwanted schemes. Since ARM
doesn't have a DEFAULTS configuration file, leave the source
files for the BSD and MBR partitioning schemes in files.arm for
now.
2007-06-11 00:38:06 +00:00
John Birrell
8391a99bf7 Remove the KDTRACE option again because of the complaints about having
it as a default.

For the record, the KDTRACE option caused _no_ additional source files
to be compiled in; certainly no CDDL source files. All it did was to
allow existing BSD licensed kernel files to include one or more CDDL
header files.

By removing this from DEFAULTS, the onus is on a kernel builder to add
the option to the kernel config, possibly by including GENERIC and
customising from there. It means that DTrace won't be a feature
available in FreeBSD by default, which is the way I intended it to be.

Without this option, you can't load the dtrace module (which contains
the dtrace device and the DTrace framework). This is equivalent to
requiring an option in a kernel config before you can load the linux
emulation module, for example.

I think it is a mistake to have DTrace ported to FreeBSD, but not
to have it available to everyone, all the time. The only exception
to this is the companies which distribute systems with FreeBSD embedded.
Those companies will customise their systems anyway. The KDTRACE
option was intended for them, and only them.
2006-11-04 23:50:12 +00:00
John Birrell
1f80cd9398 Build in kernel support for loading DTrace modules by default. This
adds the hooks that DTrace modules register with, and adds a few functions
which have the dtrace_ prefix to allow the DTrace FBT (function boundary
trace) provider to avoid tracing because they are called from the DTtrace
probe context.

Unlike other forms of tracing and debug, DTrace support in the kernel
incurs negligible run-time cost.

I think the only reason why anyone wouldn't want to have kernel support
enabled for DTrace would be due to the license (CDDL) under which DTrace
is released.
2006-11-04 04:58:10 +00:00
John Birrell
013d6d8cb4 Add 'options KSE' to the kernel config DEFAULTS on all arches/machines
except sun4v.

This change makes the transition from a default to an option more
transparent and is an attempt to head off all the compliants that are
likely from people who don't read UPDATING, based on experience with
the io/mem change.

Submitted by:	scottl@
2006-10-26 22:05:25 +00:00
Marius Strobl
6010b27c33 Correct transposed digits in device names which were added in the
previous revision.
2006-06-13 18:40:39 +00:00
Warner Losh
78878cef94 Add the ability to subset the devices that UART pulls in. This allows
the arm to compile without all the extras that don't appear, at least
not in the flavors of ARM I deal with.  This helps us save about 100k.

If I've botched the available devices on a platform, please let me
know and I'll correct ASAP.
2006-06-12 04:21:50 +00:00
Ruslan Ermilov
6646524f34 - Allow duplicate "machine" directives with the same arguments.
- Move existing "machine" directives to DEFAULTS.
2005-11-27 23:17:00 +00:00
John Baldwin
72590141ef Turn PUC_FASTINTR back off on by default on sparc64 since it breaks with
the built-in serial ports on the ultra60 and e4500.

In collusion with:	kris
2005-11-21 21:40:33 +00:00
John Baldwin
7417e80b4e Don't enable PUC_FASTINTR by default in the source. Instead, enable it
via the DEFAULTS kernel configs.  This allows folks to turn it that option
off in the kernel configs if desired without having to hack the source.
This is especially useful since PUC_FASTINTR hangs the kernel boot on my
ultra60 which has two uart(4) devices hung off of a puc(4) device.

I did not enable PUC_FASTINTR by default on powerpc since powerpc does not
currently allow sharing of INTR_FAST with non-INTR_FAST like the other
archs.
2005-11-21 20:22:35 +00:00
John Baldwin
d0750fb9b0 Create DEFAULTS files for alpha, ia64, powerpc, and sparc64 and move
'device mem' over from GENERIC to DEFAULTS to be consistent with i386 and
amd64.  Additionally, on ia64 enable ACPI by default since ia64 requires
acpi.
2005-11-21 20:17:46 +00:00