- nexus no longer has PCI bridges as direct children, so the PCI bus
ivar is no longer used and is removed.
- Don't attach default EISA, ISA, or MCA busses. Instead, if we do not
have an acpi0 device after bus_generic_probe(), add a legacy0 child
device.
- Remove machine/nexusvar.h.
ACPI or for when ACPI support is disabled or not present in the kernel.
Basically, the nexus device is now split into two with some parts
(such as adding default ISA, MCA, and EISA busses if they aren't found
as well as support for PCI bus device ivars) being moved to the legacy
driver.
expand to __attribute__((packed)) and __attribute__((aligned(x)))
respectively. Replace the handful of gcc-ism's that use
__attribute__((aligned(16))) etc around the kernel with __aligned(16).
There are over 400 __attribute__((packed)) to deal with, that can come
later. I just want to use __packed in new code rather than add more
gcc-ism's.
so that it is MI. Allow nfs_mountroot to return an error if the nfs_diskless
struct is not valid, rather than panicing later on. Call nfs_setup_diskless()
from nfs_mountroot if NFS_ROOT is defined, like bootpc_init(). Removed legacy
root mount support for sparc64, and enabled NFS_ROOT by default.
function were put in i386/i386/machdep.c from where it has been
cut and pasted to other architectures with only minor corruption.
Disklabel is really a MI format in many ways, at least it certainly
is when you operate on struct disklabel.
Put bounds_check_with_label() back in subr_disklabel.c where it belongs.
Sponsored by: DARPA & NAI Labs.
MD function is just a wrapper around db_stack_trace_cmd() that prints out
a backtrace of curthread. Currently, this function is only implemented
on i386 and alpha (and the alpha version isn't quite tested yet, will do
that in a bit). Other changes:
- For i386, fix a bug in the raw frame address case. The eip we extract
from the passed in frame address does not match the frame we received.
Thus, instead of printing a bogus frame with the wrong eip, go ahead
and advance frame down to the same frame as the eip we are using.
- For alpha, attempt to add a way of doing a raw trace for alpha. Instead
of passing a frame address in 'addr', pass in a pointer to a structure
containing PC and KSP and use those to start the backtrace. The alpha
db_print_backtrace() uses asm to read in the current PC and KSP values
into such a request.
Tested on: i386
Requested by: many
This patch addresses a bug that can cause a GPF in the kernel - if a
process makes use of i386_set_ldt to install a LDT entry, then loads
a corresponding segment descriptor into %gs, forks, and if the child
execs.
In this scenario, setregs executes user_ldt_free and then determines
how to reset the %gs register:
/* reset %gs as well */
if (pcb == curpcb)
load_gs(_udatasel);
else
pcb->pcb_gs = _udatasel;
This is insufficient in the fork/exec case, since pcb will be equal
to curpcb when the child execs; load_gs will reset %gs to _udatasel
but it doesn't reset pcb->pcb_gs; upon return from the system call,
cpu_switch_load_gs will thus attempt to restore %gs from pcb->pcb_gs
and trigger a GPF since all LDT entries have already been cleared.
The fix is to always reset pcb->pcb_gs to _udatasel.
Submitted by: Christian Zander <zander@minion.de>
Reviewed by: jake
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
- Maintain fpu state across signals.
- Use ucontext_t's to store KSE thread state.
- Synthesize state for the UTS upon each upcall, rather than
saving and copying a trapframe.
- Save and restore FPU state properly in ucontext_t's.
Reviewed by: deischen, julian
Approved by: -arch
next step is to allow > 1 to be allocated per process. This would give
multi-processor threads. (when the rest of the infrastructure is
in place)
While doing this I noticed libkvm and sys/kern/kern_proc.c:fill_kinfo_proc
are diverging more than they should.. corrective action needed soon.
to control the mapping of things like the ACPI and APM into memory.
The problem is that starting X changes these values, so if something
was using the bits of BIOS mapped into memory (say ACPI or APM),
then next time they access this memory the machine would hang.
This patch refuse to change MTRR values it doesn't understand,
unless a new "force" option is given. This means X doesn't change
them by accident but someone can override that if they really want
to.
PR: 28418
Tested by: Christopher Masto <chris@netmonger.net>,
David Bushong <david@bushong.net>,
Santos <casd@myrealbox.com>
MFC after: 1 week
to userland in the signal handler that were not being iflled out before, but
should and can be.
This part of sendsig could be slightly refactored to use an MI interface, or
ideally, *sendsig*() would have an API change to accept a siginfo_t, which
would be filled out by an MI function in the level above sendsig, and said MI
function would make a small call into MD code to fill out the MD parts (some
of which may be bogus, such as the si_addr stuff in some places). This would
eventually make it possible for parts of the kernel sending signals to set up
a siginfo with meaningful information.
Reviewed by: mux
MFC after: 2 weeks
if compiling with I686_CPU as a target. CPU_DISABLE_SSE will prevent
this from happening and will guarantee the code is not compiled in.
I am still not happy with this, but gcc is now generating code that uses
these instructions if you set CPUTYPE to p3/p4 or athlon-4/mp/xp or higher.
route interrupts if the child bus is described in the PCIBIOS interrupt
routing table. For child busses that are in the routing table, they do
not necessarily use a 'swizzle' on their pins on the parent bus to route
interrupts for child devices. If the child bus is an embedded device then
the pins on the child devices can be (and usually are) directly connected
either to a PIC or to a Interrupt Router. This fixes PCIBIOS interrupt
routing across PCI-PCI bridges for embedded devices.
