surprising how many trivial errors there have been... :-)
Some more cleanup is needed, but i'd like to separate the Lite2 changes
from other work, that's why this goes into a different commit.
People with serial printers should see whether i have broken the stty-
style printcap options (i hope not).
Inspired by: Sergey Shkonda <serg@bcs1.bcs.zaporizhzhe.ua>
Intended for sup mirrors etc. Not well tested yet.
Reviewed by: phk
Submitted by: Giles Lean <giles@nemeton.com.au>
Submitted by: John Hay <jhay@mikom.csir.co.za>
More asthetic adjustments to menus.
Improve both the display efficiency and usability of the label
screen - it's now possible to label quite a few disks in the label editor.
yp_dblookup.c:
- Implement database handle caching. What this means is that instead
of opening and closing map databases for each request, we open a
database and save the handle (and, if requested, the key index)
in an array. This saves a bit of overhead on things like repeated
YPPROC_NEXT calls, such as you'd get from getpwent(). Normally,
each YPPROC_NEXT would require open()ing the database, seeking
to the location supplied by the caller (which is time consuming with
hash databases as the R_CURSOR flag doesn't work), reading the
data, close()ing the database and then shipping the data off to
the caller. The system call overhead is prohibitive, especially
with very large maps. By caching the handle to an open database,
we elimitate at least the open()/close() system calls, as well
as the associated DB setup and tear-down operations, for a large
percentage of the time. This improves performance substantially at
the cost of consuming a little more memory than before.
Note that all the caching support is surrounded by #ifdef DB_CACHE
so that this same source module can still be used by other programs
that don't need it.
- Make yp_open_db() call yp_validdomain(). Doing it here saves cycles
when caching is enabled since a hit on the map cache list by
definition means that the domain being referenced is valid.
- Also make yp_open_db() check for exhaustion of file descriptors,
just in case.
yp_server.c:
- Reorganize things a little to take advantage of the database
handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc().
- Remove calls to yp_validdomain() from some of the service procedures.
yp_validdomain() is called inside yp_open_db() now, so procedures that
call into the database package don't need to use yp_validdomain()
themselves.
- Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize
the result.maps pointer to NULL. This causes yp_maplist_free()
to fail and leaks memory.
- Make ypproc_master_2_svc() copy the string it gets from the database
package into a private static buffer before trying to NUL terminate it.
This is necessary with the DB handle caching: stuffing a NUL into the
data returned by DB package will goof it up internally.
yp_main.c:
- Stuff for DB handle caching: call yp_init_dbs() to clear the
handle array and add call to yp_flush_all() to the SIGHUP
signal handler.
Makefile.yp:
- Reorganize to deal with database caching. yp_mkdb(8) can now be used
to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map
is created to refresh ypserv's cache.
- Add support for mail.alias map.
Contributed by Mike Murphy (mrm@sceard.com).
- Make default location for the netgroups source file be /var/yp/netgroup
instead of /etc/netgroup.
mkaliases:
- New file: script to generate mail.alias map.
Contributed by Mike Murphy (mrm@sceard.com).
Makefile:
- Install Makefile.yp as /var/yp/Makefile.dist and link it to
/var/yp/Makefile only if /var/yp/Makefile doesn't already exist.
Suggested by Peter Wemm.
- Install new mkaliases script in /usr/libexec along with mknetid.
- Use somewhat saner approach to generating rpcgen-dependent files
as suggested by Garrett Wollman.
Go back to Normal menus for Media and FTP menus rather than
radio menus - the difference in behavior is confusing and sort
of detracts from the added (small) advantage of seeing what you last
picked.
1. Fix the last display bugs (I hope) by use of dialog rebuilds at stategic
points.
2. Clean up the distributions menus so that everybody (that's reasonable)
has All and Clear options for setting/clearing things en-masse.
3. Various attempts at display optimization.
4. Change the wording of the `Don't use Write!' dialogs to make them more
explicitly define when and when not to use the option.
If you use sliplogin as a user shell (in /etc/passwd) upgrade to this version.
Reviewed by: bde, peter
Submitted by: AUS CERT
Obtained from: Linux sliplogin-2.02
I still have a _very very annoying_ display bug which occurs when a menu
item causes a submenu to be displayed - the screen repaints for the original
menu (which is restored upon return from the submenu) are off by about 4
characters. I've tried restoring the screen, the cursor position, you name
it - same deal. Grrrr! This commit is my first step in trying to get someone
else to help me look into this one since I'm just tearing my hair out at this
point!
This program is a wrapper for the prog mailer in sendmail. It does shell
meta character masking and restricts the list of executables to those found
in /usr/libexec/sm.bin.
The default sendmail.cf file does not use this tool, however you can enable
it by either changing /bin/sh to /usr/libexec/smrsh or adding the line
FEATURE(smrsh) into your sendmail .mc file and rebuilding your .cf file.
For more info, RTFMP.
pwd_mkdb.c:
- Don't save the PLUSCNT and MINUSCNT tokens: we don't need them anymore.
- Count the + and - entires for NIS together instead of counting + and -
entries seperately. Index all special NIS entries using new _PW_KEYYPBYNUM
token.
pwd.h:
- Remove the PLUSBYNUM, MINUSBYNUM, PLUSCNT and MINUSCNT tokens and replace
then with a single _PW_KEYYPBYNUM token.
to int32_t. I only fixed the ones that I noticed the warnings for.
Perhaps most of the format strings are correct now because they were
wrong before. Except of course if int32_t isn't compatible with `int'.
dbopen() to open an NIS map.
Testing with very large maps (e.g. a sample password database with 31,000+
entries) has shown that ypserv will leak memory (ps shows RSS and VSZ
growing to 4000 pages or more) when performing repeated yp_next()s or
a yp_all(). The problem with yp_all() is not immediately obvious since
the ypproc_all service is handled in a child process which exits once
the transfer is finished, but with repeated yp_next()s (like what you
get when you use getpwent() to scroll through the password database),
the parent ypserv grows to enormous size and never shrinks again.
It seems this is related to the HASHINFO parameters I used in yp_dblookup.c,
which I actually stole from pwd_mkdb. Calling dbopen() with the default
parameters (specifying openinfo as NULL) fixes the problem.
I still need to see how this impacts the other NIS tools. I'm also
considering changing from hash to btree databases: the hash database
method doesn't support R_CURSOR, which means yp_next_record() has to
do a lot of ugly work in order to reach an arbitrary location in the
database.
When PPP gets an uncompressed packet, it attempts to save off the TCP/IP
header for use in decompressing subsequant packets. If PPP gets garbage
(such as what happens when there is a port speed mismatch or modem line
noise), it will occasionally mistake the packet as a valid uncompressed
packet. When it tries to save off the header, it doesn't bother to check
for the validity of the header length and will happily clobber not only
the PPP VJC data structure, but parts of other process memory that happens
to follow it...causing, ahem, undesired behavior.
man pages up to mdoc guidelines and fix some minor formatting glitches.
Also fixed a number of man pages to not abuse the .Xr macro to
display functions and path names and a lot of other junk.
their path names in the synopsis line (especially since they
referenced the wrong path!). Corrected some other minor problems
with the rpc.lockd man page.
1. Use new dialog menu hacks (no strings, just arrays of dialogMenuItem structs)
so that I can create composite menus with radio/checkbox/... items in them,
removing some long-standing UI bogons in various menus. This work isn't
finished yet, but will be done in two phases. This is phase one.
2. Remove all the script installation stuff. I never got time to document it,
it was arcane and it just complicated much of the code. There are better
ways of doing this if I want to do auto-driven installations later.
3. Remove much dead code and otherwise attempt to remove as much historical
grot as possible so that this code is easier to hack on. This is also
a two-stage process, phase one of which is now complete.
is when the matched string spans the end of the inbuff. This fix allocates
twice the IBSIZE so that it can keep the last and the current text to search
in the inbuff so that the match won't fail if it gets truncated by the read.
It also warns if the search string is to long and truncates it.
Submitted by: Dough Ambrisco <ambrisco@ambrisco.roble.com>
printjob.c: Use termios instead of sgtty structs and ioctls; remove
support for fs/fc/xs/xc capabilities, and replace them with the ms
capability (stty-like words, instead of octal bit patterns).
modes.c: Modified from stty's file, parses comma-seperated list of
tty modes (e.g., "cs8,-paren,-opost").
Reviewed by: rgrimes, joerg
- Remove unused 'pid' member from the jobs structure. (This was left over
from an earlier incarnation of the program that used multiple processes.)
- Remove #ifdef'ed longjmp() stuff.
- Print warning message if the 'pushing' host is not the master for
a map being pushed but don't bail out. (While yppush should only
be used on an NIS master, using it elsewhere is not an unpardonable sin.)
yppush.8:
- Fix a couple of mind-os.
Makefile
- Change format to hopefully ease bootstrapping. (Suggested by wollman.)
Other Makefiles should follow.
to behave like the older sendmails when talking to a peer that does not
have esmtp or does not advertise 8BITMIME. The old sendmail "just sent it
anyway", while the 8.7.x series mangle any extended character set mail
by conferting it to quoted-printable or base64. Freefall has been
running this for some time.
- Use rpcgen to generate the unmodified boilerplate code rather than
having it in the repository.
- Eliminate the conflicting function names by changing them to their
"natural" rpcgen generated names
easy setup of default quotas for a range of uids. Usage:
edquota -p protouser startuid-enduid
E.g.
edquota -p mpp 10000-19999
Will duplicate the quota limints for user mpp for uids 10000 - 19999.
The uids in question do not have to currently exist in /etc/passwd.
. Replace my NIH-suffering code to detect the number of lines on
the terminal by the curses variable LINES.
. Fix the selection code for countries with more than one screenful
of locations. The very few people living in America/US/Pacific
now won't be charged for Indiana any longer... :)
. Removed the gross code that copied over the timezone file to
/etc/localtime, and create a symlink now instead.
recent libdisk changes. (sysinstall is guilty of using `private' in
quite more places, but since this ain't in library code, it's not that
important.)
Whenever possible, better not use C++ reserved words...
Fixed the gets() changes. The buffer contents is indeterminate when
fgets() returns NULL... Now when you type EOT at one of the prompts,
the program usually spins reading the sticky EOF instead of dumping
core. Even GUIs could do better.
Added $Id$.
Obtained from: partly from 4.4BSD-Lite2
Fixed DPADD again.
mk/bsd.README
Don't list the LIBXXX identifiers here. Describe them better.
mk/bsd.prog.mk
Updated the list of LIBXXX identifiers.
- recently added library libdisk.a wasn't mentioned (required for sysinstall)
- old objects kz*.o weren't mentioned
- old libraries libc_pic.a, libcom_err.a, libf2c.a, libg++.a, libgcc_pic.a,
libgmp.a, libipx.a, libkeycap.a, libss.a and libxpg4.a weren't mentioned
- old libraries libgnumalloc.a and libftp.a no longer exist
- old library libmp.a was said to not exist
- deprecated links libfl.a and libln.a weren't mentioned
1. Revamp package installer to use new dependency lists and also
pkg_add's new `read from stdin' mode to prevent a copy of the package
from hitting the disk unnecessarily.
2. More fixes for running "not as init" - don't get upset if CDROM already
mounted, do the right thing instead.
3. If running as init, assume first-time install and _don't show the
(W)rite option in the fdisk screen.
4. Many other little tweaks, some of which will have to wait for fuller testing
until I can create a boot floppy (testing certain system-destroying
features of sysinstall can be a royal pain). Expect some more commits.
(enable/disabled) now that the APM_GETINFO ioctl returns the necessary
information. Also, print out the status along with the other
information as the default behavior.
*not* our controlling terminal (SIGHUP can coming in other case)
2) Add HUPCL for non-dedicated lines to be shure that modem
properly resetted.
3) Correct usage string.
2) Improve on-line help subsystem
3) Make 'term' mode works even carrier dropped (old code
close line forever here)
4) Make 'term' mode 8bit clean.
5) Improve manual page
6) #ifdef DEBUG diagnostic about missing optional files.
7) Don't put interactive dialing info to logfile
IP and IPX packets over a PPP link. I added the hack to print the
PPP protocol type for other (eg: LCP, CCP, etc) packets.
Submitted by: John Hay <jhay@mikom.csir.co.za>, mods from me.
are currently implemented:
YPOLDPROC_NULL
YPOLDPROC_DOMAIN
YPOLDPROC_DOMAIN_NONACK
YPOLDPROC_FIRST
YPOLDPROC_NEXT
YPOLDPROC_MATCH
YPOLDPROC_POLL
These are all implemented as wrappers around their v2 counterparts.
The YPOLDPROC_PUSH, PULL and GET procedures are not implemented since
a) I couldn't figure out exactly what to have them do, and b) I
suspect they're used for doing map transfers between master and
slave servers, which we already do using the v2 protocol anyway.
This means we can server NIS v1 clients but can't be a master or
slave with NIS v1-only servers. I think I'll get over it. :)
The -k (sunos_4_kludge) flag and associated code has been removed
since it is no longer needed.
Also tweaked yp_access() to handle both sets of procedures and
updated the man page.
also controlled by /var/yp/securenets).
Add -u flag to turn off the privileged port check done by yp_access();
some commercial systems (IRIX, Solaris 2.x, HP-UX, and probably others)
don't use a reserved port for submitting yppasswd updates. If we always
enforce the check, these client systems will be unable to submit updates
to us.
Document securenets support and -u flag in man page.
Like ypserv, you can compile rpc.yppasswdd to use the tcpwrapper package
instead of securenets if you want to.
in the same was as the SunOS ypserv (same format, described in ypserv man
page). If the user wants tcpwrapper style access control, they can
recompile ypserv to use that instead. This way we get securenets without
having to ship libwrap.a and tcpd.h with core FreeBSD distribution.
If /var/yp/securenets doesn't exist, ypserv allows all connections.
files missing, so these shouldn't hurt. If somebody wanted to use sendmail
8.7 on their machine, they should use a clean dist anyway, not this one.
Submitted by: wollman
stub lockd.
This implements just the protocol, but does not interact with the kernel.
It says "Yes!" to all requests. This is useful if you have people using
tools that do locking for no reason (eg: some PC NFS systems running some
Microsoft products) and will happily report they couldn't lock the file
and merrily proceed anyway. Running this will not change the reliability of
sharing files, it'll just keep it out of everybody's face.
went to the multi-directory package scheme since it wasn't designed with
that kind of layout in mind when first written, and the attempts to adapt
it haven't really resulted in an interface that's easy to use. I will make
a stand-alone version of the pkg installer in sysinstall at some point
and drop it into the existing pkg_install directory.
fix return/exit codes in some cases.
Add -S which will delete any old entry first.
Add "auto" in proxy case, so it finds the right interface automatically.
Formerly, there were limits on both the number of files (hard-coded into
the program) and the number of characters (because of the ARG_MAX limit
in exec(2)). In this new version, the filenames are passed to tar through
a pipe, using tar's "-T" option, rather than on the command line.
- Improve support for multiple domains. (In preparation for new rpc.yppasswdd.)
yp_dblookup.c:
- Improve error reporting: be more selective as to what error code
we return when a (dbp->get) fails.
- Don't do longjmp()s from inside a signal handler. Even though I got
things to work the way I wanted, it's bad karma.
- Remember to clear the sa_mask with sigemptyset() before masking signals
when using sigaction() to set up the SIGIO handler.
- Break out of the wait loop in yppush_exit() when the five minute
timeout expires instead of looping around for another pass. If ypxfr
on the other end fails somehow and never sends a response, we don't
want to wait around forever.
ppp based on these patches for about 3 weeks with no downtime.
The original submitters comments:
Two features iijppp has over kernel ppp that I like are predictor1
compression and demand dialing. Here are a few bug fixes.
I expanded the priority queueing scheme and discovered it was broken
due to the assignment at ip.c line 300. All packets were being
queued at the same priority.
Fixing priority queueing broke predictor1 compression. Packets
were compressed before being queued and predictor1 worked as long
as the packets were popped off the queue in the same order they
were pushed onto the queue.
There were a few byte order problems in IP header tests also.
There is a recursion problem in SendLqrReport(). LcpClose() is
called when "Too many echo packets are lost" which winds up in
SendLqrReport() again. I believe the original intention was to
just stop the LQR timer with the call to StopLqr() but the side
effects hurt.
Submitted by: John Capo <jc@irbs.com>
require kmem access. It is currently configured to call getloadavg(3),
which uses sysctl(2) to determine the load average, which is the
only reason some sendmails require kmem access.
