This is a depessimization, see r334537 for an explanation. Routines
remain significantly slower than they have to be.
bzero was removed from the kernel but remains in libc. Macroify to
accommodate differences to memset (no return value, always setting to 0).
The bzero.S file is left in place due to libc build magic which pulls in
a C variant if a matching .S file is missing.
Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17355
Both are significantly slower than hand-coded loops. See r338963 for
kernel commit.
bcmp differs from memcmp by always returning 1 when a difference is
found, as opposed to going for a value bigger or lower than 0
depending on what it is. This means it can do less work. For now the
code is duplicated and modified. This will get deduplicated after
another round of optimization when memcmp will get a longer-term form.
Both tested with the glibc suite. While the suite does not have a test
for bcmp, I created a wrapper routine which verified that values match
(0 vs 0, 1 vs non-zero).
Reviewed by: kib
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17336
Targets like 'cleandir' must not depend on toolchain capabilities.
Reported by: delphij, Shawn Webb
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
We expect to introduce optimized libc routines in the near future,
which requires use of a linker that supports ifuncs.
Approved by: re (gjb, kib)
Sponsored by: The FreeBSD Foundation
This leverages CONFS to handle the install of the config file.
Approved by: re (blanket, pkgbase), will (mentor)
Differential Revision: https://reviews.freebsd.org/D17162
This uses relative paths to make it more specific to avoid any potential
future problems with .PATH and leverages CONFS.
libc was picked as the destination location for these because of the syscalls
that use these files as the lowest level place they are referenced.
Approved by: re (gjb), will (mentor)
Differential Revision: https://reviews.freebsd.org/D17163
This uses relative paths to make it more specific to avoid any potential
future problems with .PATH and leverages CONFS.
libc was picked as the destination location for these because of the syscalls
that use these files as the lowest level place they are referenced.
Approved by: re (gjb), will (mentor)
Differential Revision: https://reviews.freebsd.org/D17164
The change resembles what was done in r334537 for kernel routines.
While here take care of i386 variants. Note that primitives remain
suboptimal.
Reviewed by: kib (previous version)
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17167
the domain of a socket.
This is helpful when testing and Solaris and Linux have the same
socket option using the same name.
Reviewed by: bcr@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16791
This will only work if the caller already handles SIGSYS, which is not
always the case.
Address this by checking osreldate instead. Note that because there
was not __FreeBSD_version bump when the system call was added, use
1200061 (r332100) which is the first bump after the introduction of
the system call.
PR: 230762
Reported by: Jenkins via Mark Millard
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D16807
ObsoleteFiles.inc:
Remove manual pages for arc4random_addrandom(3) and
arc4random_stir(3).
contrib/ntp/lib/isc/random.c:
contrib/ntp/sntp/libevent/evutil_rand.c:
Eliminate in-tree usage of arc4random_addrandom().
crypto/heimdal/lib/roken/rand.c:
crypto/openssh/config.h:
Eliminate in-tree usage of arc4random_stir().
include/stdlib.h:
Remove arc4random_stir() and arc4random_addrandom() prototypes,
provide temporary shims for transistion period.
lib/libc/gen/Makefile.inc:
Hook arc4random-compat.c to build, add hint for Chacha20 source for
kernel, and remove arc4random_addrandom(3) and arc4random_stir(3)
links.
lib/libc/gen/arc4random.c:
Adopt OpenBSD arc4random.c,v 1.54 with bare minimum changes, use the
sys/crypto/chacha20 implementation of keystream.
lib/libc/gen/Symbol.map:
Remove arc4random_stir and arc4random_addrandom interfaces.
lib/libc/gen/arc4random.h:
Adopt OpenBSD arc4random.h,v 1.4 but provide _ARC4_LOCK of our own.
lib/libc/gen/arc4random.3:
Adopt OpenBSD arc4random.3,v 1.35 but keep FreeBSD r114444 and
r118247.
lib/libc/gen/arc4random-compat.c:
Compatibility shims for arc4random_stir and arc4random_addrandom
functions to preserve ABI. Log once when called but do nothing
otherwise.
lib/libc/gen/getentropy.c:
lib/libc/include/libc_private.h:
Fold __arc4_sysctl into getentropy.c (renamed to arnd_sysctl).
Remove from libc_private.h as a result.
sys/crypto/chacha20/chacha.c:
sys/crypto/chacha20/chacha.h:
Make it possible to use the kernel implementation in libc.
PR: 182610
Reviewed by: cem, markm
Obtained from: OpenBSD
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16760
Mention abort_handler_s(3) and ignore_handler_s(3), provide
cross-reference from memset(3).
Submitted by: Yuri Pankov <yuripv@yuripv.net>
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D16797
The function retrieves the thread name previously set by
pthread_set_name_np(3). The name is cached in the process memory.
Requested by: Willem Jan Withagen <wjw@digiware.nl>
Man page update: Yuri Pankov <yuripv@yuripv.net>
Reviewed by: ian (previous version)
Discussed with: arichardson, bjk (man page)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16702
jails since FreeBSD 7.
Along with the system call, put the various security.jail.allow_foo and
security.jail.foo_allowed sysctls partly under COMPAT_FREEBSD11 (or
BURN_BRIDGES). These sysctls had two disparate uses: on the system side,
they were global permissions for jails created via jail(2) which lacked
fine-grained permission controls; inside a jail, they're read-only
descriptions of what the current jail is allowed to do. The first use
is obsolete along with jail(2), but keep them for the second-read-only use.
Differential Revision: D14791
Leading '+', '-', and ':' in optstring have special meaning. We briefly
mention that the first two have special meaning in that we say
POSIXLY_CORRECT turns them off, but we don't actually document their
meaning. Add a paragraph to RETURN VALUES explaining how they control
the treatment of non-option arguments.
A leading ':' has no mention; add a note that it suppresses warnings about
missing arguments.
Reviewed by: jilles
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14142
While this implements a standards-conforming C11 function, there's
implementation details the programmer needs to know. Include those
here. Make changes inspired by comments on the initial review as well,
though mostly this involves stealing the epoch verbage from
gettimeofday(2). Add myself to authors since I've now changed a
substantial amount of this man page.
Remove assert.h and _DIAGASSERT to create a paper-trail of changes
from NetBSD. Specifically didn't fix other style issues since I
don't want this to diverge from the NetBSD original too much and
that's too niggling a change to be worth future merge hassles.
Differential Review: https://reviews.freebsd.org/D16649
Bring in the functionality for timespec_get from NetBSD. I've lightly
edited the .c file to remove _DIAGASSERT because FreeBSD doesn't have
that functionality and the typical #define'ing it to assert isn't
right here. The man page is verbatim from NetBSD, but will be revised
as part of a larger cleanup of the time man pages (they are
inconsistent and vague in all the wrong places).
Differential Review: https://reviews.freebsd.org/D16649
These were found by the Undefined Behavious GsoC project at NetBSD:
Avoid undefined behavior in ftok(3)
Do not change the signedness bit with a left shift operation.
Cast to unsigned integer to prevent this.
ftok.c:56:10, left shift of 123456789 by 24 places cannot be represented
in type 'int'
ftok.c:56:10, left shift of 4160 by 24 places cannot be represented in
type 'int'
Avoid undefined behavior in an inet_addr.c
Do not change the signedness bit with a left shift operation.
Cast to unsigned integer to prevent this.
inet_addr.c:218:20, left shift of 131 by 24 places cannot be represented
in type 'int'
Detected with micro-UBSan in the user mode.
Obtained from: NetBSD
MFC after: 2 weeks
Contrary to the removed comment, the kernel does appear to use the timezone
argument of settimeofday. The comment dates to the BSD4.4 import; I assume it
is just stale.
Rendering of execle was missing a comma between the NULL argument and envp.
For unclear reasons, POSIX' definition of these routines comments out the
mandatory trailing NULL argument. That seems unnecessary and probably
(reasonably) confuses mdoc.
For unclear reasons, POSIX' definition of these routines spells NULL as
"(char *)0." This is needlessly unclear. One guess might be that POSIX
targets more exotic computer architectures than FreeBSD does. Fortunately,
there is no such problem on any reasonable platform for FreeBSD to support.
Spell NULL as NULL.
The comma was probably removed in r117204 while the comment and creative
spelling of NULL were added in r116537 (both 15 years ago).
r336773 removed all things xscale. However, some things xscale are
really armv5. Revert that entirely. A more modest removal will follow.
Noticed by: andrew@
The OLD XSCALE stuff hasn't been useful in a while. The original
committer (cognet@) was the only one that had boards for it. He's
blessed this removal. Newer XSCALE (GUMSTIX) is for hardware that's
quite old. After discussion on arm@, it was clear there was no support
for keeping it.
Differential Review: https://reviews.freebsd.org/D16313
If a timer is updated (re-added) with a different time period
(specified in the .data field of the kevent), the new time period has
no effect; the timer will not expire until the original time has
elapsed. This violates the documented behavior as the kqueue(2) man
page says (in part) "Re-adding an existing event will modify the
parameters of the original event, and not result in a duplicate
entry."
This modification, adapted from a patch submitted by cem@ to PR214987,
fixes the kqueue system to allow updating a timer entry. The
kevent timer behavior is changed to:
* When a timer is re-added, update the timer parameters to and
re-start the timer using the new parameters.
* Allow updating both active and already expired timers.
* When the timer has already expired, dequeue any undelivered events
and clear the count of expirations.
All of these changes address the original PR and also bring the
FreeBSD and macOS kevent timer behaviors into agreement.
A few other changes were made along the way:
* Update the kqueue(2) man page to reflect the new timer behavior.
* Fix man page style issues in kqueue(2) diagnosed by igor.
* Update the timer libkqueue system test to test for the updated
timer behavior.
* Fix the (test) libkqueue common.h file so that it includes
config.h which defines various HAVE_* feature defines, before the
#if tests for such variables in common.h. This enables the use of
the actual err(3) family of functions.
* Fix the usages of the err(3) functions in the tests for incorrect
type of variables. Those were formerly undiagnosed due to the
disablement of the err(3) functions (see previous bullet point).
PR: 214987
Reported by: Brian Wellington <bwelling@xbill.org>
Reviewed by: kib
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15778
data from /etc/passwd rather than /etc/master.passwd.
The libc getpwent(3) and related functions automatically read master.passwd
when run by root, or passwd when run by a non-root user. When run by non-
root, getpwent() copes with the missing data by setting the corresponding
fields in the passwd struct to known values (zeroes for numbers, or a
pointer to an empty string for literals). When libutil's pw_scan(3) was
used to parse a line without the root-accessible data, it was leaving
garbage in the corresponding fields.
These changes rename the static pw_init() function used by getpwent() and
friends to __pw_initpwd(), and move it into pw_scan.c so that common init
code can be shared between libc and libutil. pw_scan(3) now calls
__pw_initpwd() before __pw_scan(), just like the getpwent() family does, so
that reading an arbitrary passwd file in either format and parsing it with
pw_scan(3) returns the same results as getpwent(3) would.
This also adds a new pw_initpwd(3) function to libutil, so that code which
creates passwd structs from scratch in some manner that doesn't involve
pw_scan() can initialize the struct to the values expected by lots of
existing code, which doesn't expect to encounter NULL pointers or garbage
values in some fields.
SPE ABI uses the soft-float ABI, which splits doubles into two words. As such,
fabs(3) cannot work on a double directly. It's too costly to convert the
argument pair into a single double to use efdabs, so clear the top bit of the
high word, which is the sign bit.
o The correct value for _JB_SIGMASK is 27.
o The storage size for double-precision floating
point register is 8 bytes.
Submitted by: "James Clarke" <jrtc4@cam.ac.uk>
Reviewed by: markj@
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16344
The issue found with gcc6 build (originally on illumos, confirmed on FreeBSD).
Mark it __unused.
Differential Revision: https://reviews.freebsd.org/D13109
Remove numactl(1), edit numa(4) to bring it some closer to reality,
provide libc ABI shims for old NUMA syscalls.
Noted and reviewed by: brooks (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16142
No valid FreeBSD binary very called them (they would call lchown and
msync directly) and we haven't supported NetBSD binaries in ages.
This is a respin of r335983 with a workaround for the ancient BFD linker
in the libc stubs.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16193
RB_ASKNAME is no longer instructions to the boot loader to request a
prompt for which kernel to boot. Instead, it asks for what the root
file system to use. RB_INITNAME is unused, and never has been in
FreeBSD as far as I can tell. Remove it from the documentation and fix
comment. RB_SELFTEST and RB_MINIROOT likewise (though they were
completely undocumented). These last three constants can likely just
be deleted as nothing references them (even to set useless bits).
RB_ASKNAME doesn't actually survive reboot, however, so needs to be
communicated to the bootloader via other means. If the bootloader sets
it, though, it will be honored.
