Commit Graph

530 Commits

Author SHA1 Message Date
Warner Losh
155a83e87a remove now-redunant cardbus attachment. 2009-03-09 13:23:54 +00:00
John Baldwin
0d484d249f Allow device hints to wire the unit numbers of devices.
- An "at" hint now reserves a device name.
- A new BUS_HINT_DEVICE_UNIT method is added to the bus interface.  When
  determining the unit number of a device, this method is invoked to
  let the bus driver specify the unit of a device given a specific
  devclass.  This is the only way a device can be given a name reserved
  via an "at" hint.
- Implement BUS_HINT_DEVICE_UNIT() for the acpi(4) and isa(4) bus drivers.
  Both of these busses implement this by comparing the resources for a
  given hint device with the resources enumerated by ACPI/PnPBIOS and
  wire a unit if the hint resources are a subset of the "real" resources.
- Use bus_hinted_children() for adding hinted devices on isa(4) busses
  now instead of doing it by hand.
- Remove the unit kludging from sio(4) as it is no longer necessary.

Prodding from:	peter, imp
OK'd by:	marcel
MFC after:	1 month
2008-11-18 21:01:54 +00:00
Warner Losh
e21f22596b Add a note about a bug in how sio manages its softc. This was
discovered by Dorr H. Clark.  I'm not at all sure how to fix it, but
wanted to document it at the very least...
2008-10-08 08:08:03 +00:00
Peter Wemm
43d7128c14 Expand kdb_alt_break a little, most commonly used with the option
ALT_BREAK_TO_DEBUGGER.  In addition to "Enter ~ ctrl-B" (to enter the
debugger), there is now "Enter ~ ctrl-P" (force panic) and
"Enter ~ ctrl-R" (request clean reboot, ala ctrl-alt-del on syscons).

We've used variations of this at work.  The force panic sequence is
best used with KDB_UNATTENDED for when you just want it to dump and
get on with it.

The reboot request is a safer way of getting into single user than
a power cycle.  eg: you've hosed the ability to log in (pam, rtld, etc).
It gives init the reboot signal, which causes an orderly reboot.

I've taken my best guess at what the !x86 and non-sio code changes
should be.

This also makes sio release its spinlock before calling KDB/DDB.
2008-05-04 23:29:38 +00:00
Robert Watson
3de213cc00 Add a new 'why' argument to kdb_enter(), and a set of constants to use
for that argument.  This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.

Assign approximate why values to all current consumers of the
kdb_enter() interface.
2007-12-25 17:52:02 +00:00
Julian Elischer
abc3f1d24b Stop serial console and gdb serial port from getting all screwed up.
PR: 65278
MFC in: 3 days
Submitted by: ups@
2007-12-05 05:16:56 +00:00
Peter Wemm
3e3d9737c7 Allow the sio acpi attachment to be disabled (ie: use hints only). This
hack means you can get the units and flags to match up more easily with
serial consoles on machines with acpi tables that cause the com ports
to be probed in the wrong order (and hence get the wrong sio unit number).

This replaces the common alternative hack of editing the code to comment
out the acpi attachment.  This could go away entirely when device wiring
patches are committed.
2007-11-30 21:45:07 +00:00
Peter Wemm
585484b918 Add sio_puc_kludge_unit() to stop sio devices originating from puc
stomping on the units intended for the motherboard sio ports.  This is
no real substitute for the not-yet-committed device wiring enhancements.

Code taken from sio's pci attachment.
2007-11-30 21:36:12 +00:00
Kevin Lo
976b010645 Spelling fix for interupt -> interrupt 2007-10-12 06:03:46 +00:00
Maxim Konovalov
991555c9c0 o Revert last. The chip is already supported by puc(4).
Pointed out by:	marcel, Joseph Terner
2007-03-29 04:26:52 +00:00
Maxim Konovalov
747bef5b85 o Add MosChip 9835 PCI Dual UART PCI id.
PR:		kern/110967
Submitted by:	Joseph Terner
MFC after:	1 month
2007-03-28 18:56:27 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
John-Mark Gurney
9773a00fa7 Only treat positive values as errors...
Pointed out by:	wsk
Message-ID: <45060FC4.2090308@gddsn.org.cn>
2006-09-14 03:47:59 +00:00
Warner Losh
aab9226995 Restore the status quo before my last commit. Prior to it, sio took
precedence uart.  With my last change, it became a tie, and uart seems
to always win on my amd64.  This was not my intention, so have sio be
just a tiny bit more preferred than uart.

Note: I'm not making any judgement on the merits of uart winning.  I'm
just saying that if we want to change it, we do it on purpose.
2006-07-17 03:47:18 +00:00
Warner Losh
6c6d4885ee Have sio return BIS_PROBE_DEFAULT like all the other drivers in the
tree...  John Baldwin noted that sio might pass values between probe
and attach via softc.  It appears that sio does leave the hardware in
a known state after probing, so other drivers that try to probe might
leave it in a worse state.  It doesn't seem to pass any data in softc,
however, that I could find...  I think we should not be probing for
anything but nonPnP isa, but that's a change for another day.

Submitted by: Frank Behrens
PR: 87845
2006-06-30 06:27:24 +00:00
Poul-Henning Kamp
9b188af13c Eliminate gdb_checkc member from GDB_DBGPORT(), it is never used.
Use polling behaviour for gdb_getc() where convenient, this edges us
closer to the console code.
2006-05-26 11:54:32 +00:00
Poul-Henning Kamp
3fc7129ed1 Convert to use CONSOLE_DRIVER() macro:
Remove cngetc, rename cncheckc to cngetc (fix GDB console accordingly)
2006-05-26 11:21:52 +00:00
Poul-Henning Kamp
12e9e65766 Insert a '_' in the console function names to be more consistent with
the future.
2006-05-26 10:44:47 +00:00
Marcel Moolenaar
64220a7e28 Rewrite of puc(4). Significant changes are:
o  Properly use rman(9) to manage resources. This eliminates the
   need to puc-specific hacks to rman. It also allows devinfo(8)
   to be used to find out the specific assignment of resources to
   serial/parallel ports.
o  Compress the PCI device "database" by optimizing for the common
   case and to use a procedural interface to handle the exceptions.
   The procedural interface also generalizes the need to setup the
   hardware (program chipsets, program clock frequencies).
o  Eliminate the need for PUC_FASTINTR. Serdev devices are fast by
   default and non-serdev devices are handled by the bus.
o  Use the serdev I/F to collect interrupt status and to handle
   interrupts across ports in priority order.
o  Sync the PCI device configuration to include devices found in
   NetBSD and not yet merged to FreeBSD.
o  Add support for Quatech 2, 4 and 8 port UARTs.
o  Add support for a couple dozen Timedia serial cards as found
   in Linux.
2006-04-28 21:21:53 +00:00
John Baldwin
57fb5e6097 - Use bus_setup_intr() and bus_teardown_intr() to register device driver
interrupt handlers rather than BUS_SETUP_INTR() and BUS_TEARDOWN_INTR().
  Uses of the BUS_*() versions in the implementation of foo_intr methods
  in bus drivers were not changed.  Mostly this just means that some
  drivers might start printing diagnostic messages like [FAST] when
  appropriate as well as honoring mpsafenet=0.
- Fix two more of the ppbus drivers' identify routines to function
  correctly in the mythical case of a machine with more than one ppbus.
2006-02-22 18:16:26 +00:00
Warner Losh
5d4d5ea6e1 Use __DEVOLATILE to cast conspeed. 2005-12-07 07:23:53 +00:00
John Baldwin
e0f66ef861 Reorganize the interrupt handling code a bit to make a few things cleaner
and increase flexibility to allow various different approaches to be tried
in the future.
- Split struct ithd up into two pieces.  struct intr_event holds the list
  of interrupt handlers associated with interrupt sources.
  struct intr_thread contains the data relative to an interrupt thread.
  Currently we still provide a 1:1 relationship of events to threads
  with the exception that events only have an associated thread if there
  is at least one threaded interrupt handler attached to the event.  This
  means that on x86 we no longer have 4 bazillion interrupt threads with
  no handlers.  It also means that interrupt events with only INTR_FAST
  handlers no longer have an associated thread either.
- Renamed struct intrhand to struct intr_handler to follow the struct
  intr_foo naming convention.  This did require renaming the powerpc
  MD struct intr_handler to struct ppc_intr_handler.
- INTR_FAST no longer implies INTR_EXCL on all architectures except for
  powerpc.  This means that multiple INTR_FAST handlers can attach to the
  same interrupt and that INTR_FAST and non-INTR_FAST handlers can attach
  to the same interrupt.  Sharing INTR_FAST handlers may not always be
  desirable, but having sio(4) and uhci(4) fight over an IRQ isn't fun
  either.  Drivers can always still use INTR_EXCL to ask for an interrupt
  exclusively.  The way this sharing works is that when an interrupt
  comes in, all the INTR_FAST handlers are executed first, and if any
  threaded handlers exist, the interrupt thread is scheduled afterwards.
  This type of layout also makes it possible to investigate using interrupt
  filters ala OS X where the filter determines whether or not its companion
  threaded handler should run.
- Aside from the INTR_FAST changes above, the impact on MD interrupt code
  is mostly just 's/ithread/intr_event/'.
- A new MI ddb command 'show intrs' walks the list of interrupt events
  dumping their state.  It also has a '/v' verbose switch which dumps
  info about all of the handlers attached to each event.
- We currently don't destroy an interrupt thread when the last threaded
  handler is removed because it would suck for things like ppbus(8)'s
  braindead behavior.  The code is present, though, it is just under
  #if 0 for now.
- Move the code to actually execute the threaded handlers for an interrrupt
  event into a separate function so that ithread_loop() becomes more
  readable.  Previously this code was all in the middle of ithread_loop()
  and indented halfway across the screen.
- Made struct intr_thread private to kern_intr.c and replaced td_ithd
  with a thread private flag TDP_ITHREAD.
- In statclock, check curthread against idlethread directly rather than
  curthread's proc against idlethread's proc. (Not really related to intr
  changes)

Tested on:	alpha, amd64, i386, sparc64
Tested on:	arm, ia64 (older version of patch by cognet and marcel)
2005-10-25 19:48:48 +00:00
Poul-Henning Kamp
733634738e Eliminate two unused arguments to ttycreate(). 2005-10-16 20:22:56 +00:00
Warner Losh
c82f53f61d 'PC Card' instead of other variants 2005-09-22 06:01:44 +00:00
Warner Losh
93605bb138 Last change to this file actually removed the oldcard compat code.
This change removes one last K&Rism.
2005-09-19 03:35:32 +00:00
Warner Losh
ad4f426ef6 Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash.  Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
2005-09-19 03:10:21 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
John Baldwin
b9d9b6ef3d Oops, revert a commit that snuck in with the earlier critical section
changes.

Noticed by:	bde
2005-04-05 18:06:28 +00:00
John Baldwin
c6a37e8413 Divorce critical sections from spinlocks. Critical sections as denoted by
critical_enter() and critical_exit() are now solely a mechanism for
deferring kernel preemptions.  They no longer have any affect on
interrupts.  This means that standalone critical sections are now very
cheap as they are simply unlocked integer increments and decrements for the
common case.

Spin mutexes now use a separate KPI implemented in MD code: spinlock_enter()
and spinlock_exit().  This KPI is responsible for providing whatever MD
guarantees are needed to ensure that a thread holding a spin lock won't
be preempted by any other code that will try to lock the same lock.  For
now all archs continue to block interrupts in a "spinlock section" as they
did formerly in all critical sections.  Note that I've also taken this
opportunity to push a few things into MD code rather than MI.  For example,
critical_fork_exit() no longer exists.  Instead, MD code ensures that new
threads have the correct state when they are created.  Also, we no longer
try to fixup the idlethreads for APs in MI code.  Instead, each arch sets
the initial curthread and adjusts the state of the idle thread it borrows
in order to perform the initial context switch.

This change is largely a big NOP, but the cleaner separation it provides
will allow for more efficient alternative locking schemes in other parts
of the kernel (bare critical sections rather than per-CPU spin mutexes
for per-CPU data for example).

Reviewed by:	grehan, cognet, arch@, others
Tested on:	i386, alpha, sparc64, powerpc, arm, possibly more
2005-04-04 21:53:56 +00:00
Robert Watson
78e21ab011 Simplify the "and if we're in the debugger, don't use locks" logic,
correcting some misthinking.

Discussed with (really this time):	bde
2005-02-08 17:56:04 +00:00
Robert Watson
faabfac9ff When entering siocnputc() with (kdb_active), don't acquire (or
release) the sio spin mutex, as use of synchronization primitives in
the debugger can result in substantial problems.  With this patch in
place entering the debugger via a serial console is made
substantially more reliable.

MFC after:	1 week
Tested by:	kris
Discussed with:	bde
2005-02-03 10:35:05 +00:00
Warner Losh
c80b5ef285 puc handles this card, so remove it from here.
PR: 48468
2005-01-11 00:53:58 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Nate Lawson
e5979322ba Remove local hacks to set flags now that the device probe does this for us.
Tested on every device except sio_pci and the pc98 fd.c.  Perhaps something
similar should be done for the "disabled" hints also.

MFC after:	2 weeks
2004-10-14 22:21:59 +00:00
Poul-Henning Kamp
9cb9afbd68 Use generic tty code instead of local stuff.
NB:  device names are now consistent:  {cua,tty}d$(port)[.lock,.init]
2004-10-13 08:27:20 +00:00
Poul-Henning Kamp
04e9e86c1f Use ttyconsolemode() to set the console tty modes. 2004-10-12 20:16:02 +00:00
Yoshihiro Takahashi
31eac965cd MFpc98: Check a pointer is NULL, remove unused variable. 2004-09-20 13:55:26 +00:00
Poul-Henning Kamp
08d79b63f6 Fix an issue with ng_tty which (ab)used the tty->t_sc field which is
reserved for the device drivers:

Add a t_lsc field for line discipline private use.
2004-09-17 22:26:27 +00:00
Poul-Henning Kamp
a45b36ad47 Use ttyalloc() instead of ttymalloc(NULL) 2004-09-17 07:28:07 +00:00
Poul-Henning Kamp
4aa1a77d6f Allocate tty at attach time rather than open time.
Use the init/lock*in/out fields in struct tty and remove them from our softc.

Use tty->t_sc to find out softc when convenient.

Mostly OK'ed by:	bde
2004-09-16 19:46:23 +00:00
Warner Losh
a7092dac2e If you insert a pccard modem and then eject it, you get a panic. This
happens because the sio device was never opened and com->tp is
therefore NULL.  ttygone can't swallow a NULL, so guard against that
possibility.  Other places in this function make similar checks, so I
believe this is correct.
2004-07-22 23:16:12 +00:00
Poul-Henning Kamp
672c05d49c Preparation commit for the tty cleanups that will follow in the near
future:

rename ttyopen() -> tty_open() and ttyclose() -> tty_close().

We need the ttyopen() and ttyclose() for the new generic cdevsw
functions for tty devices in order to have consistent naming.
2004-07-15 20:47:41 +00:00
Poul-Henning Kamp
911dbd84c7 Introduce ttygone() which indicates that the hardware is detached.
Move dtrwait logic to the generic TTY level.
2004-07-11 15:18:39 +00:00
Marcel Moolenaar
6af8e47df7 Update for the KDB framework. Sanitize the alpha console code now that
it's in the way even more. Basicly: remove all alpha specific console
support from gfb(4), sio(4) and syscons(4). Rewrite the alpha console
initialization to be identical to all other platforms. In a nutshell:
call cninit().
The platform specific code now only sets or clears RB_SERIAL and thus
automaticly causes the right console to be selected.

sio.c:
o  Replace the remote GDB hacks and use the GDB debug port interface
   instead.
o  Make debugging code conditional upon KDB instead of DDB.
o  Call kdb_alt_break() instead of db_alt_break().
o  Call kdb_enter() instead of breakpoint().
o  Remove the ugly compatibility of using the console as the debug
   port.
2004-07-10 22:29:41 +00:00
Poul-Henning Kamp
b4994e318a Define the tty methods as typedefs.
Change the return type for t_break to void.

Add t_ioctl (more about this later).
2004-06-30 21:38:08 +00:00
John Baldwin
3df6c4de7e - Shorten the names for the TTY related swi interrupt handlers as the
'tty:' prefix is largely redundant.
- Fix the priority of the low-priority TTY SWIs that are hung off of the
  softclock thread.

Submitted by:	bde (2)
2004-06-28 16:17:11 +00:00
Poul-Henning Kamp
ae404e3427 Guard against us having no tty pointer. 2004-06-27 11:29:54 +00:00
Poul-Henning Kamp
cb9ea5f4cb Pick the hotchar out of the tty structure instead of caching private
copies.

No current line disciplines have a dynamically changing hotchar, and
expecting to receive anything sensible during a change in ldisc is
insane so no locking of the hotchar field is necessary.
2004-06-26 09:20:07 +00:00
Poul-Henning Kamp
85bc8ea7fc Use generic support for modemcontrol and BREAK ioctls. 2004-06-25 10:51:33 +00:00
Poul-Henning Kamp
fdf5c3da04 Remove the TIOCDCDTIMESTAMP option.
The RFC-2783 PPS-API (<sys/timepps.h>) provides better and more
configurable service.
2004-06-22 20:32:17 +00:00