Commit Graph

31 Commits

Author SHA1 Message Date
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Warner Losh
96ba6a6eb2 Have a function pointer to the routine to call for writing an mbuf
into the card's memory.

# this eliminates a more of the ifdef soup in if_ed and if_edvar

# I've fixed the cbus drivers, but can't test them all easily.

If I've broken anything, please let me know.
2006-01-27 19:10:13 +00:00
Warner Losh
f91fdbc2cc Add support for the Compaq LTE docking station. It includes a plug
and play device with the ID of PNP8160.  Sotr them while I'm here.

Submitted by:	Sean Shapira    sds at jazzie dotty com
MFC After: 1 week
2006-01-15 04:10:47 +00:00
Warner Losh
db099e0981 Add missing softc 2005-10-22 07:43:20 +00:00
Warner Losh
9910f6b1d6 Turns out that we're asking for the MAC address at a bad time in the
attach routine.  Go ahead and ask for it in the probe routine and be
just as wrong as all the other cards that ask for it there...

# this gets the RTL8019 on a SBC at work fully functional.  6.0 still treats
# the 8019 as a generic NE-2000, so these changes aren't relevant there.
2005-10-22 07:26:05 +00:00
Warner Losh
ebf417cf92 Check against 8019 rather than 8029 for reading in the MAC addr since
the former is the ISA part, not the latter.

MFC After 6.0 is unfrozen (this bug doesn't exist in 6.0 because I didn't
	MFC the rtl80x9 changes for ISA due to an error on my part)
2005-10-17 02:32:23 +00:00
Warner Losh
95a2adef58 MFp4:
o Add support for Tamarack TC5299J + MII found on SMC 8041TX V.2
	  and corega PCCCCTXD
	o Add support for ISA/PCI RTL80[12]9 chips
	o Improve support for the ax88790 based
	o minor code movement

Submitted by: (#2) David Madole
2005-10-05 05:21:07 +00:00
Warner Losh
f1c4694df3 Finish conversion to bus space and make ed MP safe.
o Lock ed
o Fix extra newline in probe messages
o Eliminate gone.
o Make detach less-racy.
o Eliminate spl*
o Switch from timeout/untimeout to callout interface.
o Read/write card memory using bus_space calls.
o generalize readmem so that we don't need ifs in the code.
o Fix memory stuff to be consistant.
o Remove OLDCARD compat stuff.
o Mark interrupt as MPSAFE.

# sic, hpp not tested at all
# ISA and PCI attachments lightly tested
2005-08-28 23:56:25 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Warner Losh
eb01f10be1 Minor style nits missed in earlier passes 2005-02-22 18:58:34 +00:00
Warner Losh
206189067d Move the harvesting of the MAC address out of the generic novell probe
and into the bus front ends.  For ISA and C-BUS cards, we always need
to grab it.  For PC Card, already committed, we need to do some sanity
checking on the data that's in the ROMs before we decide that they are
OK to use.  The PC Card code has already been committed and is
independent of this code (which also has to work on NE-1000 cards,
assuming that those cards still work :-).
2005-02-14 23:00:41 +00:00
Warner Losh
969eaf2179 Break out obscure ISA cards into their own files, as well as ne2000
and wd80x3 support.  Make the obscure ISA cards optional, and add
those options to NOTES on i386 (note: the ifdef around the whole code
is for module building).  Tweak pc98 ed support to include wd80x3 too.
Add goo for alpha too.

The affected cards are the 3Com 3C503, HP LAN+ and SIC (whatever that
is).  I couldn't find any of these for sale on ebay, so they are
untested.  If you have one of these cards, and send it to me, I'll
ensure that you have no future problems with it...

Minor cleanups as well by using functions rather than cut and paste
code for some probing operations (where the function call overhead is
lost in the noise).

Remove use of kvtop, since they aren't required anymore.  This driver
needs to get its memory mapped act together, however, and use bus
space.  It doesn't right now.

This reduces the size of if_ed.ko from about 51k to 33k on my laptop.
2005-02-09 20:03:40 +00:00
Warner Losh
8a3b3c6288 Remove reference to softc from probe entirely... 2005-02-09 05:55:54 +00:00
Warner Losh
50f30261e7 No need to bzero softc. 2005-02-08 23:58:38 +00:00
Warner Losh
9d512034e3 Make it possible to unload ed. Move the ed_pccard_detach routine to
if_ed and rename it to ed_detach().  Tell other busses to use this
routine for detach.

Since I don't actually have any non-pccard ed hardware I can test
with, I've only tested with my pccards.

More improvements in this area likely are possible.

Prodded by: rwatson
2005-02-08 05:45:35 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Takeshi Shibagaki
5141386c7b Add Allied Telesis SIC-AT boards support.
Discussed in from [FreeBSD-tech-jp 3396] to [FreeBSD-tech-jp 3407]
at FreeBSD-tech-jp@jp.freebsd.org.

NOTE: We must put ed_probe_SIC() function into if_ed_isa.c because
      this is a bus dependent code. But the ed driver code is not
      separated explicitly whether it is bus dependent or independent
      now.

Refer to: http://plaza17.mbn.or.jp/~chi/myprog/FreeBSD/sicat.html
Submitted by: chi@bd.mbn.or.jp (Chiharu Shibata)
2003-10-15 17:22:15 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Takanori Watanabe
7850154fdd Add ALLIED TELESIS,K.K. LA-ISA V2 ISA PnP ID.
Submitted by:	nork
MFC after: 3 days
2002-07-26 17:33:58 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Warner Losh
cc9e9343cd Minor newbus/style(9) cleanups.
o Move the ax88190 code to its own function.
o Move all device_method_t, driver_t and DRIVER_MODULE definitions to the
  end of files.
o Wrap a few lines > 80 characters.
o Use the same devclass for all ed drivers.  This allows machines with
  multiple types of cards to have their cards numbered correctly.  Before,
  you could wind up with two ed0's.
o Protect if_edvar.h from multiple includes because I was there.
2000-12-26 06:38:04 +00:00
Warner Losh
727928f866 Remove unnecessary includes found by phk's script. I've been building
these locally for ages.
2000-12-13 06:28:37 +00:00
Mike Smith
1b97a6c6a9 Network modules are all "if_foo" not "foo". Avoid the confusing spew that
ensues when ifconfig tries to load if_ed.ko when it's already in the kernel.
2000-10-15 20:23:27 +00:00
Yoshihiro Takahashi
82583dd564 - Fixed the conversion to bus_space interface.
- Added PC-98 Cbus devices support.
  The original patch is submitted by chi@bd.mbn.or.jp (Chiharu Shibata)
- Removed old ed driver.
2000-08-17 12:15:45 +00:00
Matthew N. Dodd
cb5d0c333f I forgot to remove the "NCARD == 0" hacks that kept this driver
from blowing up on PCMCIA systems.  The hack isn't needed anymore.

Reminded by: Blaz Zupan <blaz@gold.amis.net>
1999-11-20 09:28:01 +00:00
Yoshihiro Takahashi
663631a5eb Set port_used and mem_used to the resource size instead of 1.
Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
1999-11-18 14:18:19 +00:00
Matthew N. Dodd
e3f7c52da1 Fix compiling PCCARD kernels.
This is a hack and I don't like it.

Hopefully the new PCCARD stuff should be in working order in a day or so.
1999-10-24 07:17:26 +00:00
Matthew N. Dodd
14bacef14e - Remove the ISA, PCI, and PCCARD specific code from if_ed.c; it
now lives in the respective bus front end files.
- Add various function prototypes to if_edvar.h
- Clean up some debugging code that snuck into if_ed_isa.c
- Turn on the right bits in files.i386
1999-10-15 03:12:48 +00:00
Matthew N. Dodd
9b63938369 Break out the bus front end code into separate files.
Note that these haven't been turned on nor has the old code
been removed from if_ed.c.  The next commit will address that.
1999-10-15 01:28:04 +00:00