For example, without this patch, the following three lines
in /boot/loader.conf would result in /boot/root.img being preloaded
twice, and two md(4) devices - md0 and md1 - being created.
initmd_load="YES"
initmd_type="md_image"
initmd_name="/boot/root.img"
Reviewed by: marcel@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3204
but it's hard to find and easy to miss.
Reviewed by: wblock@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3183
than bootp and rarp.
The code which splits a serverip:/rootpath string into rootip and a plain
pathname is now a separate net_parse_rootpath() function that can be
called by others. The code that sets the kernel env vars needed for
nfs_diskless is moved into net_open() so that the variables get set no
matter where the params came from.
There was already code in net_open() that allowed for the possibility that
some other entity has set up the network-related global variables. It uses
the rootip variable as the key, assuming that if it is set all the other
required variables are set too. These changes don't alter the existing
behavior, they just make it easier to actually write some new code to get
the params from another source (such as the U-Boot environment).
Previously, ubldr would use the virtual addresses in the elf headers by
masking off the high bits and assuming the result was a physical address
where the kernel should be loaded. That would sometimes discard
significant bits of the physical address, but the effects of that were
undone by archsw copy code that would find a large block of memory and
apply an offset to the source/dest copy addresses. The result was that
things were loaded at a different physical address than requested by the
higher code layers, but that worked because other adjustments were applied
later (such as when jumping to the entry point). Very confusing, and
somewhat fragile.
Now the archsw copy routines are just simple copies, and instead
archsw.arch_loadaddr is implemented to choose a load address. The new
routine uses some of the code from the old offset-translation routine to
find the largest block of ram, but it excludes ubldr itself from that
range, and also excludes If ubldr splits the largest block of ram in
two, the kernel is loaded into the bottom of whichever resulting block is
larger.
As part of eliminating ubldr itself from the ram ranges, export the heap
start/end addresses in a pair of new global variables.
This change means that the virtual addresses in the arm kernel elf headers
now have no meaning at all, except for the entry point address. There is
an implicit assumption that the entry point is in the first text page, and
that the address in the the header can be turned into an offset by masking
it with PAGE_MASK. In the future we can link all arm kernels at a virtual
address of 0xC0000000 with no need to use any low-order part of the
address to influence where in ram the kernel gets loaded.
The function was defined as taking 4 parameters and returning EFI_STATUS,
but all existing callers (in asm code) passed only two parameters and don't
use the return value. The function signature now matches that usage, and
doesn't refer to efi-specific types.
Parameters and variables now use the cannonical typenames set up by elf.h
(Elf_Word, Elf_Addr, etc) instead of raw C types. Hopefully this will
prevent suprises as new platforms come along and use this code.
The function was renamed from _reloc() to self_reloc() to emphasize its
difference from the other elf relocation code found in boot/common.
Differential Revision: https://reviews.freebsd.org/D2490
Use the proper types in parse_modmetadata for the p_start and p_end
parameters. This was causing problems in the ARM 32bit loader.
Sponsored by: Citrix Systems R&D
Reported and Tested by: ian
Implement a subset of the multiboot specification in order to boot Xen
and a FreeBSD Dom0 from the FreeBSD bootloader. This multiboot
implementation is tailored to boot Xen and FreeBSD Dom0, and it will
most surely fail to boot any other multiboot compilant kernel.
In order to detect and boot the Xen microkernel, two new file formats
are added to the bootloader, multiboot and multiboot_obj. Multiboot
support must be tested before regular ELF support, since Xen is a
multiboot kernel that also uses ELF. After a multiboot kernel is
detected, all the other loaded kernels/modules are parsed by the
multiboot_obj format.
The layout of the loaded objects in memory is the following; first the
Xen kernel is loaded as a 32bit ELF into memory (Xen will switch to
long mode by itself), after that the FreeBSD kernel is loaded as a RAW
file (Xen will parse and load it using it's internal ELF loader), and
finally the metadata and the modules are loaded using the native
FreeBSD way. After everything is loaded we jump into Xen's entry point
using a small trampoline. The order of the multiboot modules passed to
Xen is the following, the first module is the RAW FreeBSD kernel, and
the second module is the metadata and the FreeBSD modules.
Since Xen will relocate the memory position of the second
multiboot module (the one that contains the metadata and native
FreeBSD modules), we need to stash the original modulep address inside
of the metadata itself in order to recalculate its position once
booted. This also means the metadata must come before the loaded
modules, so after loading the FreeBSD kernel a portion of memory is
reserved in order to place the metadata before booting.
In order to tell the loader to boot Xen and then the FreeBSD kernel the
following has to be added to the /boot/loader.conf file:
xen_cmdline="dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga"
xen_kernel="/boot/xen"
The first argument contains the command line that will be passed to the Xen
kernel, while the second argument is the path to the Xen kernel itself. This
can also be done manually from the loader command line, by for example
typing the following set of commands:
OK unload
OK load /boot/xen dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga
OK load kernel
OK load zfs
OK load if_tap
OK load ...
OK boot
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D517
For the Forth bits:
Submitted by: Julien Grall <julien.grall AT citrix.com>
associating an optional PNP hint table with this module. In the
future, when these are added, these changes will silently ignore the
new type they would otherwise warn about. It will always be safe to
ignore this data. Get this into the builds today for some future
proofing.
MFC After: 3 days
output frequency of the "twiddle" IO progress indicator. The default
value is 1. For larger values N, the next stage of the animation is only
output on every Nth call to the output routine. A sufficiently large N
effectively disables the animation completely.
crowded as we now are at about 70k. Bump the limit to 1MB instead
which is still quite a reasonable limit and allows for future growth
of this file and possible future expansion to additional data.
MFC After: 2 weeks
The various structures in the mod_metadata set of a FreeBSD kernel and
modules contain pointers. The FreeBSD loader correctly deals with a
mismatch in loader and kernel pointer size (e.g. 32-bit i386/ppc
loader, loading 64-bit amd64/ppc64 kernels), but wasn't dealing with
the inverse case where a 64-bit loader was loading a 32-bit kernel.
Reported by: ktcallbox@gmail.com with a bhyve/i386 and ZFS root install
Differential Revision: https://reviews.freebsd.org/D1129
Reviewed by: neel, jhb
MFC after: 1 week
This involves:
1. Have the loader pass the start and size of the .ctors section to the
kernel in 2 new metadata elements.
2. Have the linker backends look for and record the start and size of
the .ctors section in dynamically loaded modules.
3. Have the linker backends call the constructors as part of the final
work of initializing preloaded or dynamically loaded modules.
Note that LLVM appends the priority of the constructors to the name of
the .ctors section. Not so when compiling with GCC. The code currently
works for GCC and not for LLVM.
Submitted by: Dmitry Mikulin <dmitrym@juniper.net>
Obtained from: Juniper Networks, Inc.
like EX and SRX. The install command uses pkgfs to extract a kernel,
zero or more modules and a root file system from the specified package
and boots the kernel. The name of the kernel, the list of modules and
the name of the root file system can be specified by putting a
file called "metatags in the package.
The package to use is given by an URL. The schemes supported are
tftp and file. For the file scheme, the disk is currently hardcoded
but that should really look for the package on all devices and
partititions.
Obtained from: Juniper Networks, Inc.
particular, allow loaders to define the name of the RC script the
interpreter needs to use. Use this new-found control to have the
PXE loader (when compiled with TFTP support and not NFS support)
read from ${bootfile}.4th, where ${bootfile} is the name of the
file fetched by the PXE firmware.
The normal startup process involves reading the following files:
1. /boot/boot.4th
2. /boot/loader.rc or alternatively /boot/boot.conf
When these come from a FreeBSD-defined file system, this is all
good. But when we boot over the network, subdirectories and fixed
file names are often painful to administrators and there's really
no way for them to change the behaviour of the loader.
Obtained from: Juniper Networks, Inc.
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
the PowerPC port with all the Open Firmware bits removed and replaced by
their EFI counterparts. On the whole, I think I prefer Open Firmware.
This code is supposed to be an immutable shim that sits on the EFI system
partition, loads /boot/loader.efi from UFS and tells the real loader what
disk/partition to look at. It finds the UFS root partition by the somewhat
braindead approach of picking the first UFS partition it can find. Better
approaches are called for, but this works for now. This shim loader will
also be useful for secure boot in the future, which will require some
rearchitecture.
when MBR contains only PMBR entry or it is bootcamp-compatible.
If MBR has PMBR entry and some other, the loader rejects it.
Make these checks to be less strict. If loader decided that PMBR
isn't suitable for GPT, it will use MBR.
Reported by: Paul Thornton
Tested by: Paul Thornton
MFC after: 1 week
fragments; while this won't actually be used for anything (yet), it
doesn't hurt to ensure it is exposed to the tinderbox.
Requested by: imp, jmallett
MFC after: 3 weeks
arguments from type,filename to filename,type to be consistant with other
public file_whatever() functions, and change it to return a pointer to
the preloaded_file struct describing the file. Adjust existing callers.
- Similar to the hack for bootinfo32.c in userboot, define
_MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot.
This allows userboot to load 32-bit kernels and modules.
- Copy the SMAP generation code out of bootinfo64.c and into its own
file so it can be shared with bootinfo32.c to pass an SMAP to the i386
kernel.
- Use uint32_t instead of u_long when aligning module metadata in
bootinfo32.c in userboot, as otherwise the metadata used 64-bit
alignment which corrupted the layout.
- Populate the basemem and extmem members of the bootinfo struct passed
to 32-bit kernels.
- Fix the 32-bit stack in userboot to start at the top of the stack
instead of the bottom so that there is room to grow before the
kernel switches to its own stack.
- Push a fake return address onto the 32-bit stack in addition to the
arguments normally passed to exec() in the loader. This return
address is needed to convince recover_bootinfo() in the 32-bit
locore code that it is being invoked from a "new" boot block.
- Add a routine to libvmmapi to setup a 32-bit flat mode register state
including a GDT and TSS that is able to start the i386 kernel and
update bhyveload to use it when booting an i386 kernel.
- Use the guest register state to determine the CPU's current instruction
mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long
mode) in the instruction emulation code. Update the gla2gpa() routine
used when fetching instructions to handle flat mode, 32-bit paging, and
PAE paging in addition to long mode paging. Don't look for a REX
prefix when the CPU is in 32-bit mode, and use the detected mode to
enable the existing 32-bit mode code when decoding the mod r/m byte.
Reviewed by: grehan, neel
MFC after: 1 month
they can easily be used by later post-processing. When searching for
a compiled-in fdt blob, use the section headers to get the size and
location of the .dynsym section to do a symbol search.
This fixes a problem where the search could overshoot the symbol
table and wander into the string table. Sometimes that was harmless
and sometimes it lead to spurious panic messages about an offset
bigger than the module size.
elf headers, mask out the high nibble of that address. This effectly makes
the entry point the offset from the load address, and it gets adjusted for
the actual load address before jumping to it.
Masking the high nibble makes assumptions about memory layout that are true
for all the arm platforms we support right now, but it makes me uneasy.
This needs to be revisited.
