Commit Graph

67 Commits

Author SHA1 Message Date
Jung-uk Kim
406930fba4 Revert r200231. It was already taken cared by jhb long ago.
Pointed out by:	jhb
Pointy hat:	jkim
2009-12-07 21:24:07 +00:00
Jung-uk Kim
0cca89cc53 Make mfi(4) little bit less chatty. 2009-12-07 20:17:33 +00:00
John Baldwin
a56fe095f0 Temporarily revert the new-bus locking for 8.0 release. It will be
reintroduced after HEAD is reopened for commits by re@.

Approved by:	re (kib), attilio
2009-08-20 19:17:53 +00:00
Scott Long
763fae7918 ntroduce mfiutil, a basic utility for managing LSI SAS-RAID & Dell PERC5/6
controllers.  Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.

This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality.  However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.

Approved by:    re
Obtained from:  Yahoo! Inc.
2009-08-13 23:18:45 +00:00
Attilio Rao
444b91868b Make the newbus subsystem Giant free by adding the new newbus sxlock.
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.

Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.

For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.

Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.

Bump __FreeBSD_version in order to reflect the newbus lock introduction.

Reviewed by:    ed, hps, jhb, imp, mav, scottl
No answer by:   ariff, thompsa, yongari
Tested by:      pho,
                G. Trematerra <giovanni dot trematerra at gmail dot com>,
                Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by:   Yahoo! Incorporated
Approved by:	re (ksmith)
2009-08-02 14:28:40 +00:00
Scott Long
52c9ce25d8 Separate the parallel scsi knowledge out of the core of the XPT, and
modularize it so that new transports can be created.

Add a transport for SATA

Add a periph+protocol layer for ATA

Add a driver for AHCI-compliant hardware.

Add a maxio field to CAM so that drivers can advertise their max
I/O capability.  Modify various drivers so that they are insulated
from the value of MAXPHYS.

The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel.  The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives.  It also supports port multipliers.

ATA drives are accessed via 'ada' device nodes.  ATAPI drives are
accessed via 'cd' device nodes.  They can all be enumerated and manipulated
via camcontrol, just like SCSI drives.  SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol.  See the camcontrol manpage for further
details.  Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.

This code is very experimental at the moment.  The userland ABI/API has
changed, so applications will need to be recompiled.  It may change
further in the near future.  The 'ada' device name may also change as
more infrastructure is completed in this project.  The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.

Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed.  In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.

The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols.  It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware.  While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged.  Help with new transports is also encouraged.

Submitted by:	scottl, mav
Approved by:	re
2009-07-10 08:18:08 +00:00
Scott Long
cadd4fa0b4 fw_state ad cur_state are holding unsigned bitfields, so declare then
as unsigned as well.

Submitted by:	rdivacky
2009-06-24 16:11:29 +00:00
Warner Losh
00b4e54ae7 We no longer need to use d_thread_t, migrate to struct thread *. 2009-05-20 17:29:21 +00:00
Doug Ambrisko
216d58bbcc Change Dell's gen2 catch-all from Dell PERC H700/H800 to Dell PERC Gen2
and bump the driver version from 2 to 3 and fix the related style problem.

Suggested by:	LSI
2008-12-15 17:11:40 +00:00
Doug Ambrisko
2997859fe0 Sort the PCI device's and make the catch-all for new Dell
cards only apply to Dell.  This gets rid of the duplicate
catch-all that I introduced that jkim caught.

Prompted by:	jkim
Reviewed by:	jkim
2008-12-12 20:29:34 +00:00
Doug Ambrisko
bd97b1f46a Add in some more device ID's and a generic catch-all.
Submitted by:	LSI
2008-12-12 16:41:12 +00:00
Doug Ambrisko
d205405c23 Change new card identification names.
Submitted by:	LSI
MFC after:	3 days
2008-12-03 16:29:12 +00:00
John Baldwin
d0e14c5099 Fix the maximum transfer size for mfi(4) disk devices to not exceed the
maximum number of scatter/gather elements supported in the bus dma tag.

Reviewed by:	scottl
MFC after:	1 week
2008-11-17 23:30:19 +00:00
Doug Ambrisko
4254ef5903 Fix compile. I was in the wrong tree when I tested it :-(
Pointed out by:	Andrzej
2008-11-14 23:32:31 +00:00
Doug Ambrisko
b89b182c58 When running a 32bit app. on amd64, ensure the bits above 32bit
are zero for the copyout.  Confirmed by LSI.
2008-11-14 21:05:45 +00:00
Doug Ambrisko
0a15841568 One more piece to add to make sense data work for a user app. from LSI.
Submitted by:	LSI
MFC after:	3 days
2008-11-13 17:13:16 +00:00
Doug Ambrisko
fa1e6ef4ef - Fix from jhb for failing I/O request when bus_dmamap_load fails.
- Fix to ioctl path in which the length could be 0 which means
  no data in/out from LSI.
- Fix to ioctl path in which the data in the sense data space
  of the ioctl packet is a really a pointer to some location in
  user-space.  From LSI re-worked a bit by me.
- Add HW support for next gen cards from LSI.

Thanks to LSI for their support!

Submitted by:	jhb, LSI
MFC after:	3 days
2008-11-12 22:44:50 +00:00
Warner Losh
e04ca6236a Fix style nit: s/^ }/}/ in two places. 2008-08-23 23:30:54 +00:00
John Baldwin
2137b017d7 Tweak the output of event log messages from the controller:
- Each log entry contains a text description in the "description" field of
  the entry.  The existing decode logic always ended up duplicating
  information that was already in the description string.  This made the
  logs overly verbose.  Now we just print out the description string.
- Add some simple parsing of the timestamp and event classes.

Reviewed by:	ambrisko, scottl
MFC after:	2 weeks
2008-06-26 22:36:38 +00:00
John Baldwin
c1ed06a84b Adjust the handling of pending log events during boot:
- Fetch events from the controller in batches of 15 rather than a single
  event at a time.
- When fetching events from the controller, honor the event class and
  locale settings (via hw.mfi tunables).  This also allows the firmware to
  skip over unwanted log entries resulting in fewer requests to the
  controller if there many unwanted log entries since the last clean
  shutdown.
- Don't drop the driver mutex while decoding an event.
- If we get an error other than MFI_STAT_NOT_FOUND (basically EOF for
  hitting the end of the event log) then emit a warning and bail on
  processing further log entries.

Reviewed by:	ambrisko, scottl
MFC after:	2 weeks
2008-06-26 22:33:24 +00:00
Doug Ambrisko
46fb79ea72 Add support to talk to the LSI ioctl path on with FreeBSD 32 bit app's
on amd64.  Note the only difference is the iovec32 part so I use the
native structure for everything else.

Also I plan to MFC all the changes in -current to 7-stable and 6-stable
shortly since I've been running them.  This does not include the cam
changes.

MFC after:	3 days
2008-05-28 23:19:27 +00:00
Scott Long
0929b66905 Add support for management apps. Work around an apparent firmware bug that
results in hung i/o if more than 128 commands are scheduled for an array.
2008-05-12 14:09:19 +00:00
Kris Kennaway
c637bc9203 Replace callout_init(..., 1) with callout_init(..., CALLOUT_MPSAFE) for
better grep-compliance and to standardize with the rest of the kernel.

Reviewed by:	       jhb
MFC after:	       1 week
2008-04-16 16:47:14 +00:00
Doug Ambrisko
a355f43ed2 Add in a compat. mode so you can either open the card's device
node or directly open mfi0 and specify the card you want to talk to
in the ioctl.
2008-03-22 02:57:49 +00:00
Doug Ambrisko
04697de95a Fix some bugs in dealing with DCMD'd without data. MegaCli was sending
down some DCMD's without any data.  Thanks to Dell and LSI for helping
to provide clues to figure out this problem.  Now MegaCli can upgrade
the firmware and should work identical when run on Linux.

Reviewed by:	scottl, LSI
MFC after:	1 day
2008-02-02 17:29:28 +00:00
Doug Ambrisko
4844f5c009 Add Dell's sub-vendor id to identify PERC6 RAID controller which has LSI
vendor id's.
2007-12-19 17:23:47 +00:00
Doug Ambrisko
9df7763bf3 I incorrectly assumed the log buffer started from the beginning when it
is actually a circular log.  Deal with it rolling around.  Fortunately,
the log area is big and I haven't seen any roll over yet.  Update and
get rid of the obsolete comment.
2007-12-19 17:22:07 +00:00
Scott Long
b05e6558c9 Play better with CAM so that there aren't so many spurious warnings at boot. 2007-10-12 16:52:55 +00:00
Scott Long
610f2ef365 Update the MFI driver to support new "1078" series of hardware. This
includes the upcoming Dell PERC6 series.  Many thanks to LSI for
contributing this code.

Submitted by: LSI
Approved by: re
2007-08-25 23:58:45 +00:00
John Baldwin
cde586a75c Fix a few nits relative to the previous changes:
- Don't leak the config lock if detach() fails due to the controller char
  dev being open.
- Close a race between detach() and a process opening the controller char
  dev.

MFC after:	1 week
Approved by:	re (bmah)
2007-08-13 21:14:16 +00:00
John Baldwin
8ec5c98ba4 Teach the mfi(4) driver to handle requests from userland management
applications to add and remove volumes.

MFC after:	1 week
Approved by:	re (bmah)
Reviewed by:	ambrisko, scottl
2007-08-13 19:29:17 +00:00
Scott Long
b50569b71d Prepare for future integration between CAM and newbus. xpt_bus_register
now takes a device_t to be the parent of the bus that is being created.
Most SIMs have been updated with a reasonable argument, but a few exceptions
just pass NULL for now.  This argument isn't used yet and the newbus
integration likely won't be ready until after 7.0-RELEASE.
2007-06-17 05:55:54 +00:00
Doug Ambrisko
5be25877a1 Add in a couple of things:
-	In the ioctl path let command get queued up and return
	when complete _without_ blocking the driving waiting for
	the response.  This way the driver doesn't "lock up" for
	~30s during a flash command.  Submitted by scottl.
      -	Add a guard so that if a DCMD of 0 is sent down the ioctl
	path don't send it to the controller.  Return with a
	status of OK.  This is a little strange since MegaCli
	doesn't seem to like something and will issue some DCMD
	of 0.  This doesn't happen under Linux.  So the emulation
	needs to be improved but I'm not sure what.  Another strange
	thing is that when a DCMD of 0 gets issued under i386 the
	controller returns OK but in amd64 the context is messed
	up.
      -	Add a guard so the context has to be with-in the legal
	limit so we get a reasonable error assertion versus random
	panic.

It's going to be a challenge to figure out why MegaCli is not totally
happy and then sends some bogus commands.  This means that flashing
firmware via the Linux tool won't work since it generates a DCMD of
0 when it should be opening the firmware for a flash update.  Without
this problem flashing works fine.  This means there is no publicly
available tool to upgrade the RAID firmware under FreeBSD right now.

I plan to MFC all of the mfi changes to 6.X shortly.  This might not
include the SCSI pass-through changes.

Submitted by:	scottl
Reviewed by:	scottl
MFC after:	3 days
2007-06-04 16:39:22 +00:00
Scott Long
35ef86f285 Catch up to driver changes required for the mfip sub-driver. 2007-05-16 17:23:36 +00:00
Scott Long
f366931c86 Add the 'mfip' sub-driver for gaining SCSI-passthrough access to devices
on an MFI controller.
2007-05-16 17:19:47 +00:00
Scott Long
ddfae47b9d Collapse the mfi_ld object. Add an ioctl to help management apps map
array Id's to FreeBSD device names.
2007-05-10 15:33:41 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Scott Long
95a8bcd854 Remove a PCI ID entry that conflicts with the AMR driver. 2007-01-23 02:47:33 +00:00
Scott Long
875d25860a Add PCI Id's for upcoming controllers.
Obtained from: LSI Corp.
MFC After: 3 days
2007-01-17 02:58:41 +00:00
Scott Long
c953d93930 Up the event class reporting from 10 (basically, nothing) to EVT_CLASS_INFO.
Submitted by: Doug Ambrisko
2007-01-07 06:43:25 +00:00
Scott Long
a91d6dab2e Make sure that all of the fields in the header are clean. It was possible for
unsafe flags to leak from one command to another.
2007-01-02 04:12:34 +00:00
Doug Ambrisko
812819c7b1 Some relatively minor changes and bug fixes:
1)	s/mi/mfi/ in FreeBSD ioctl path
     2)	add in "\n" on various failure messages
     3)	cap the length of time to abort an AEN command
     4)	fix passing sense data back to user to make Dell's Linux firmware
	upgrade tool happy.
     5)	bump the MFI_POLL_TIMEOUT_SECS from 10s to 50s since the
	firmware flash command can take ~40s to return.

This is some clean-up and enables RAID firmware to updated via Dell's
tool.  Note Dell's tool requires the updates to the Linux emulator
that has been done in -current with TLS etc.

I need to discuss with scottl how to better submit mfi commands to
the firmware via the ioctl path so we don't do it in polled mode.
2006-12-14 18:29:08 +00:00
Scott Long
3c77cee1ba Change the internal API for polled commands. Calling mfi_polled_command
after calling mfi_mapcmd is no longer needed, so long as the MFI_CMD_POLLED
flag is set.  This change eliminates the possibility of a polled command
getting posted twice to the driver.  This is turn fixes panics on shutdown
when INVARIANTS is set.

Sponsored by: Ironport
2006-11-18 07:33:53 +00:00
Doug Ambrisko
c2be47f25f - Add in FreeBSD native ioctl that models the Linux version.
- Add a translation so the Linux ioctl's don't conflict with
  the FreeBSD definition.
- Assume Linux 32bit emulation on amd64.
This was tested on i386 and amd64 with the 32bit Linux MegaCli.
Eventually we should do a 32bit native FreeBSD translation app.
2006-11-14 16:48:00 +00:00
Scott Long
6d678f8ee7 Remove some debugging code that accidentally crept in. 2006-10-16 04:30:09 +00:00
Scott Long
441f6d5dca - Add a command validator for use in debugging.
- Fix the locking protocol to eliminate races between normal I/O and AENs.
- Various small improvements and usability tweaks.

Sponsored by: IronPort
Portions Submitted by: Doug Ambrisko
2006-10-16 04:18:38 +00:00
Scott Long
37fe50c382 Skip the AEN event command that is always hanging out on the card.
Submitted by: Doug Ambrisko
2006-09-27 05:00:10 +00:00
Scott Long
420a5a0e25 Fix a bad #include statment 2006-09-27 04:54:23 +00:00
Scott Long
5ba21ff136 Add a command debugging module and a periodic watchdog timer.
Sponsored by: IronPort
2006-09-25 11:35:34 +00:00
Doug Ambrisko
a1adc445ed Allow hw.mfi.event_locale/hw.mfi.event_class to be set via loader.
If an event doesn't match the criteria then don't print it.  Some
events are not saved in the log (<0 class events).
2006-09-20 18:49:35 +00:00