Commit Graph

135 Commits

Author SHA1 Message Date
Pawel Jakub Dawidek
e8adbe4499 Avoid race while synchronizing components. It is very hard to bump into,
but it is possible:
1. Read data from good component for synchronization.
2. Write data to the same area.
3. Write synchronization data, which are now stale.

Found by:	tegge
2004-09-26 20:41:07 +00:00
Pawel Jakub Dawidek
31522023f9 Simplify code a bit. 2004-09-26 20:30:15 +00:00
Pawel Jakub Dawidek
201dfcf143 This is not needed anymore, it is forced in GEOM now.
Actually, it can even cause some problems, because GEOM requires sectorsize
to be more than 0 on first access, not on provider creation, so we can skip
valid providers by doing this check here.

Reported by:	Divacky Roman <xdivac02@stud.fit.vutbr.cz>
		Sven Willenberger <sven@dmv.com>
2004-09-20 17:26:25 +00:00
Pawel Jakub Dawidek
f7b4d339ac Show current status of mirror device directly.
Suggested by:	Krzysztof Ciep³ucha <kris@home.pl>
2004-09-08 16:37:22 +00:00
Pawel Jakub Dawidek
6d7b8aecd3 Allow to configure debug level from /boot/loader.conf. 2004-08-30 18:50:06 +00:00
Pawel Jakub Dawidek
45d5e85a40 GCC, ehh. 2004-08-29 14:29:30 +00:00
Pawel Jakub Dawidek
29c78ab315 Skip providers with not defined sector size.
Reported by:	kuriyama
2004-08-26 12:42:47 +00:00
Pawel Jakub Dawidek
c8b906bcbe Allow to set kern.geom.mirror.timeout from /boot/loader.conf. 2004-08-23 20:42:34 +00:00
Pawel Jakub Dawidek
d86bc96cab We really don't want to receive spoil event for synchroniztion consumers. 2004-08-18 23:33:37 +00:00
Pawel Jakub Dawidek
f1ad62a4d8 Bump synchronization ID if we are sure, that we have ACTIVE components. 2004-08-18 07:28:48 +00:00
Pawel Jakub Dawidek
f62d59df32 Avoid code duplication by introducing g_mirror_write_metadata() function,
which is used now by g_mirror_clear_metadata() function and
g_mirror_update_metadata() function.
2004-08-15 13:58:29 +00:00
Pawel Jakub Dawidek
887c9fd564 MFp4: Simplify code a bit:
- Remove kern.geom.mirror.sync_block_size sysctl. It is quite obvious that we
  want to use the biggest size possible.
- Do not use UMA zone for sync data allocations. There could be only one
  synchronization request per synchronized disk at a time, so allocate memory
  for one request on whole synchronization process related to one disk.

Tested by synchronizing one component (out of three) and by synchronizing
two components (out of three) in parallel.
2004-08-11 23:41:53 +00:00
Pawel Jakub Dawidek
445a4b68f2 Actually, HARDCODED flag isn't stored in metadata, so don't bother
dumping it.
2004-08-11 22:16:42 +00:00
Pawel Jakub Dawidek
2def749bb1 - Fix typo.
- Dump HARDCODED flag.
2004-08-11 22:12:44 +00:00
Pawel Jakub Dawidek
6d8fb92d78 Try harder to not panic on 'stop -f'.
After the commit, this command should be really safe to use.
2004-08-11 11:10:46 +00:00
Pawel Jakub Dawidek
6b2b3e8745 - Recognize HARDCODED flag when dumping consumer configuration.
- Improve code readabilty a bit.
2004-08-10 19:53:31 +00:00
Pawel Jakub Dawidek
c38d2f4eca Forgot to commit those: introduce hardcoded provider functionality,
which allow to store provider's name in the metadata and avoid
problems when few providers share the same last sector.
2004-08-10 19:52:12 +00:00
Pawel Jakub Dawidek
6c74f5177c - Introduce option for hardcoding providers' names into metadata.
It allows to fix problems when last provider's sector is shared between few
  providers.
- Bump version number for CONCAT and STRIPE and add code for backward
  compatibility.
- Do not bump version number of MIRROR, as it wasn't officially introduced yet.
  Even if someone started to play with it, there is no big deal, because
  wrong MD5 sum of metadata will deny those providers.
- Update manual pages.
- Add version history to g_(stripe|concat).h files.
2004-08-09 11:29:42 +00:00
Poul-Henning Kamp
5721c9c76a Tag all geom classes in the tree with a version number. 2004-08-08 07:57:53 +00:00
Pawel Jakub Dawidek
db332970e7 Don't use 'bp' after its destruction! 2004-08-05 14:07:21 +00:00
Pawel Jakub Dawidek
a4fa09ec93 Simplify a bit - we could use 'sc' here as it was initialized properly. 2004-08-05 13:22:17 +00:00
Pawel Jakub Dawidek
51385a3c00 - Add two fields to bio structure: 'bio_cflags' which can be used by
consumer and 'bio_pflags' which can be used by provider.
- Remove BIO_FLAG1 and BIO_FLAG2 flags. From now on new fields should be
  used for internal flags.
- Update g_bio(9) manual page.
- Update some comments.
- Update GEOM_MIRROR, which was the only one using BIO_FLAGs.

Idea from:	phk
Reviewed by:	phk
2004-08-04 21:35:05 +00:00
Pawel Jakub Dawidek
fe7c3780c8 - Add "prefer" balance algorithm. When used, only disk with the biggest
priority will be used for reading.
- Bump version number.
2004-08-04 12:09:53 +00:00
Pawel Jakub Dawidek
e1efe7edcd MFp4: We don't really need g_mirror_free_disk() function. 2004-08-04 10:02:06 +00:00
Pawel Jakub Dawidek
7d01f1820a Fix comment. 2004-08-03 15:41:33 +00:00
Pawel Jakub Dawidek
6b1c71eef8 Typo. 2004-08-01 20:41:58 +00:00
Pawel Jakub Dawidek
4084e6aad2 - Launch main provider when there are no more disks in NEW state.
- Log syncid bump at debug level 1.
2004-08-01 09:01:50 +00:00
Pawel Jakub Dawidek
959521ff1f If there are no valid components after the timeout, just destroy device.
There is probably nothing to wait for.
2004-07-31 22:10:51 +00:00
Pawel Jakub Dawidek
4b2e596e38 Handle spoil event in dedicated function: g_mirror_spoiled().
The different between the new function and g_mirror_orphan() (which was
used previously) is that syncid is bumped immediately, instead of on
first write, because when consumer was spoiled, it means, that its
provider was opened for writing, so we can't trust that its data
will be valid when it will be connected again.
2004-07-31 21:08:17 +00:00
Pawel Jakub Dawidek
484405eb8d Remove unused field. 2004-07-31 13:03:38 +00:00
Pawel Jakub Dawidek
2d53f42307 Destroy synchronization geom immediately. This should fix unloading without
stopping all mirrors.
2004-07-31 11:22:03 +00:00
Pawel Jakub Dawidek
55d6eb9fef Add '-p' option for 'insert' command which allows to specify priority
of the new component.
Version number wasn't bumped (it should be), because I think there are
no geom_mirror users yet.
2004-07-31 00:54:44 +00:00
Pawel Jakub Dawidek
ff9160f5f3 - Check if 'slice' argument was given.
- Check if disk isn't already the mirror component.
2004-07-31 00:51:33 +00:00
Pawel Jakub Dawidek
f251dfbf5d Dump correct field. 2004-07-31 00:37:14 +00:00
Pawel Jakub Dawidek
fa4a1febf7 Add GEOM_MIRROR class which provide RAID1 functionality and has many useful
features. The gmirror(8) utility should be used for control of this class.
There is no manual page yet, but I'm working on it with keramida@.

Many useful tests provided by:	simon (thank you!)
Some ideas from:		scottl, simon, phk
2004-07-30 23:13:45 +00:00