Commit Graph

31 Commits

Author SHA1 Message Date
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Navdeep Parhar
a5eb009b49 cxgb: replace r273280 with a more comprehensive fix.
Poll for link state when the link is down, even for interrupt capable
PHYs.

Allow PHYs to report a dubious "partial" link.  If this state is seen 3
consecutive times (each check is ~1s apart) then reset the PHY.  This is
a workaround for a situation where repeatedly toggling the link from the
peer gets the AEL2005 PHY into a state where it never establishes a PCS
block lock even when everything is in order.

MFC after:	1 week
2015-01-11 07:51:58 +00:00
Gabor Kovesdan
ab3f6b347e - Correct mispellings of the word occurrence
Submitted by:	Christoph Mallon <christoph.mallon@gmx.de> (via private mail)
2013-04-17 11:40:10 +00:00
Navdeep Parhar
2b3b9558ef T3C initialization should setup the parity fence too.
MFC after:	1 week
2011-03-24 01:13:28 +00:00
Navdeep Parhar
225f5b4adc Fix t3_gate_rx_traffic and t3_open_rx_traffic. Parts of them always operated
on XGMAC0 instead of the specified XGMAC.

MFC after:	3 days
2010-09-15 21:50:37 +00:00
Navdeep Parhar
3dd6d7570f Always reset the XGMAC's XAUI PCS on a link up.
MFC after:	3 days
2010-08-15 20:45:16 +00:00
Navdeep Parhar
bd1a9fbad6 Improve cxgb(4)'s behaviour when faced with temporarily "bouncy" links:
- Run the adapter's tick at 1Hz and remove link state checks from it.
  Instead, have each port check its link state.  Delay the check so that
  it takes place slightly after the driver is notified of a change in
  link state.  This is a cheap way to debounce these notifications if
  many are received in rapid succession.  POLL_LINK_1ST_TIME flag can
  also be eliminated as a side effect of these changes.
- Do not reset the PHY when link goes down.
- Clear port's link_fault flag if the PHY indicates link is down.
- get_link_status_r should leave speed and duplex alone when link is down.

MFC after:	1 month
2010-07-09 00:38:00 +00:00
Navdeep Parhar
2c32b50248 Eliminate ext_intr_task. The "slow" interrupt handler is already
running on the adapter's task queue.  Just do what the task does
instead of enqueueing it.

MFC after:	3 days
2010-07-09 00:36:35 +00:00
Navdeep Parhar
97ae3bc359 Multiple fixes related to queue set sizing and resources:
- Only the tunnelq (TXQ_ETH) requires a buf_ring, an ifq, and the watchdog/timer
  callouts.  Do not allocate these for the other tx queues.

- Use 16k jumbo clusters only on offload capable cards by default.

- Do not allocate a full tx ring for the offload queue if the card is not
  offload capable.

- Slightly better freelist size calculation.

- Fix nmbjumbo4 typo, remove unneeded global variables.

MFC after:	3 days
2010-03-31 00:27:49 +00:00
Navdeep Parhar
e83ec3e5c3 There is no need to test __FreeBSD_version for features that have
been around for a long time now (7.1-ish or even earlier); assume
they are present.  These includes MSI, TSO, LRO, VLAN, INTR_FILTERS,
FIRMWARE, etc.

Also, eliminate some dead code and clean up in other places as part
of this quick once-over.

MFC after:	1 week
2010-02-24 10:16:18 +00:00
Navdeep Parhar
b6783ad018 Extra parantheses to keep certain compilers happy.
Submitted by:	trasz@
2010-01-09 18:07:10 +00:00
Navdeep Parhar
c01f2b8301 cxgb(4) updates, including:
- support for the new Gen-2, BT, and LP-CR cards.
- T3 firmware 7.7.0
- shared "common code" updates.

Approved by:	gnn (mentor)
Obtained from:	Chelsio
MFC after:	1 month
2009-10-05 20:21:41 +00:00
George V. Neville-Neil
0bbdea7776 Integrate three changes from Chelsio.
1) Add a sysctl that will say what type of PHYs exist on the card.
2) Fix a bug that occurs when an AEL 2005 PHY resets without a transciever
in the card.
3) Unify the PHY link detection code.

Obtained from:	Navdeep Parhar
MFC after:	10 days
2009-05-21 15:08:03 +00:00
George V. Neville-Neil
f2d8ff04fe Update the Chelsio driver to the latest bits from Chelsio
Firmware upgraded to 7.1.0 (from 5.0.0).
T3C EEPROM and SRAM added; Code to update eeprom/sram fixed.
fl_empty and rx_fifo_ovfl counters can be observed via sysctl.
Two new cxgbtool commands to get uP logic analyzer info and uP IOQs
Synced up with Chelsio's "common code" (as of 03/03/09)

Submitted by:	 Navdeep Parhar at Chelsio
Reviewed by:	gnn
MFC after:	2 weeks
2009-03-10 19:22:45 +00:00
George V. Neville-Neil
7f15419bb7 Bug fix to support N310 version of Chelsio cards (board ID 1088).
Obtained from:	Chelsio Inc.
MFC after:	3 days
2008-12-06 02:10:53 +00:00
George V. Neville-Neil
2a1b9f07fc Several small additions to the Chelsio 10G driver.
1) Fix a bug in dealing with the Alerus 1006 PHY which prevented the
device from ever coming back up once it had been set to down.

2) Add a kernel tunable (hw.cxgb.snd_queue_len) which makes it possible
to give the device more than IFQ_MAXLEN entries in its send queue.  The
default remains 50.

3) Add code to place the card'd identification and serial number into
its description (%desc) so that users can tell which card they have
installed.
2008-11-21 19:22:25 +00:00
Kip Macy
d1340303b9 Update firmware version check
make ddp a tunable

Obtained from:	Chelsio Inc.
MFC after:	3 days
2008-11-12 04:45:09 +00:00
Kip Macy
79775f8f1b Update cxgb include paths to not require prefixing with dev/cxgb
Submitted by:	Chelsio Inc.
2008-09-23 03:16:54 +00:00
Kip Macy
aa819acf89 White space cleanups to bring closer to RELENG_7 2008-09-16 02:03:28 +00:00
Kip Macy
9b4de886f9 Vendor fix for PHY problem.
Obtained from:	Chelsio Inc.
MFC after:	3 days
2008-08-11 23:01:34 +00:00
Kip Macy
4af83c8cff import vendor fixes to cxgb 2008-07-18 06:12:31 +00:00
Kip Macy
8e10660f12 - update firmware to 5.0
- add support for T3C
- add DDP support (zero-copy receive)
- fix TOE transmit of large requests
- fix shutdown so that sockets don't remain in CLOSING state indefinitely
- register listeners when an interface is brought up after tom is loaded
- fix setting of multicast filter
- enable link at device attach
- exit tick handler if shutdown is in progress
- add helper for logging TCB
- add sysctls for dumping transmit queues

- note that TOE wxill not be MFC'd until after 7.0 has been finalized

MFC after: 3 days
2008-02-23 01:06:17 +00:00
Kip Macy
a8d57f7f24 Fix last-minute typo in last commit caused by pre-commit scripts
Approved by: re(blanket)
2007-09-09 03:51:25 +00:00
Kip Macy
5c5df3da16 - fix qset to port binding as a proper fix for the problems encountered on the 4-port
- fix the use after free seen when sending packets small enough to fit as an immediate
   and bpf peers are present
 - update to firmware rev 4.7 along with various small vendor fixes

Supported by: Chelsio
Approved by: re (blanket)
MFC after: 3 days
2007-09-09 01:28:03 +00:00
Kip Macy
7aff6d8ed3 forward port signedness fixes from RELENG_6
fix compile error for case where MSI_SUPPORTED not defined

Approved by: re (blanket)
2007-08-17 05:57:04 +00:00
Kip Macy
ac3a6d9cef - integrate most recent changes from vendor branch and upgrade to firmware revision 4.5.5
- add filter support
	- further improvements for T304
- recover gracefully from spurious immediate packets

Approved by: re(blanket)
Supported by: Chelsio
MFC after: 3 days
2007-07-17 06:50:35 +00:00
Kip Macy
ef72318f0e - import new common code for the T304
- update to firmware version 4.1.0

- switch over to standard method for initializing cdevs (contributed by scottl@)
- break out timer_reclaim_task to be per-port
- move msix teardown into separate function
- fix bus_setup_intr for msi-x for the multi-port case so that msi-x resources
  are not corrupted on unload
- handle 10/100/1000 base-T media and auto negotiation
- bind qset to cpu even for singleq case
- white space cleanups
- remove recursive PORT_LOCK
- move mtu setting to separate function
- stop and re-init port when changing mtu
- replace all direct references to m_data with calls to mtod
- handle attach failure better by not trying to de-initialize
  taskqueues when they have not been allocated
- no longer default to jumbo frames

Sponsored by: Chelsio
MFC after: 3 days
2007-06-13 05:36:00 +00:00
Kip Macy
10faa56870 When building cxgb as a module make include paths relative to the driver's root.
This will make it possible to build the module out of tree against an older src tree.

MFC after: 3 days
2007-05-28 22:57:27 +00:00
Kip Macy
d722cab49a (MFp4)
- upgrade to reflect state of 1.0.0.86
        - move from firmware rev 3.2 to 4.0.0
        - import driver bits for offload functionality
	- remove binary distribution clause from top level files as it
	  runs counter to the intent of purely supporting the hardware

MFC after: 3 days
2007-05-25 09:48:20 +00:00
Kip Macy
577e9bbe3e Synchronize with version 1.0.071 of Chelsio's common code
(with the notable exception of improvements for using multiple TX queues)

This adds support for the T3B2 ASIC rev

Obtained from: Chelsio
MFC after: 3 days
2007-03-20 21:43:32 +00:00
Kip Macy
b6d90eb779 First of several commits for driver support for the Chelsio T3B 10 Gigabit
Ethernet adapter.

Reviewed by: scottl, sam

For those interested in the preliminary performance work see below.

Plots of mxge vs. cxgb running netpipe:

blocksize vs. bandwidth:
http://www.fsmware.com/chelsio.random/bsvsbw.gif

blocksize vs. RTT:
First of several commits for driver support for the Chelsio T3B 10 Gigabit
Ethernet adapter.

Reviewed by: scottl, sam

For those interested in the preliminary performance work see below.

Plots of mxge vs. cxgb running netpipe:

blocksize vs. bandwidth:
http://www.fsmware.com/chelsio.random/bsvsbw.gif

blocksize vs. RTT:
http://www.fsmware.com/chelsio.random/bsvstime.gif

blocksize vs. RTT for block sizes <= 10kb:
http://www.fsmware.com/chelsio.random/bsvstime_10kb.gif
http://www.fsmware.com/chelsio.random/bsvstime_10kb3.gif
2007-03-14 02:37:44 +00:00