This has the following benefits:
- allows to use the AT keyboard maps in share/syscons/keymaps with
sunkbd(4),
- allows to use kbdmux(4) with sunkbd(4),
- allows Sun RS232 keyboards to be configured and used the same
way as Sun USB keyboards driven by ukbd(4) (which also does AT
keyboard emulation) with X.Org, putting an end to the problem
of native support for the former in X.Org being broken over and
over again.
MFC after: 3 days
an unified way for all the lock primitives to express lock assertions.
Currenty, lockmgrs and rmlocks don't have assertions, so just panic in
that case.
This will be a base for more callout improvements.
Ok'ed by: jhb, jeff
strees2 suite, to quote his letter, this change:
1. It removes the tn_lookup_dirent stuff. I think this cannot be fixed,
because nothing protects vnode/tmpfs node between lookup is done, and
actual operation is performed, in the case the vnode lock is dropped.
At least, this is the case with the from vnode for rename.
For now, we do the linear lookup in the parent node. This has its own
drawbacks. Not mentioning speed (that could be fixed by using hash), the
real problem is the situation where several hardlinks exist in the dvp.
But, I think this is fixable.
2. The patch restores the VV_ROOT flag on the root vnode after it became
reclaimed and allocated again. This fixes MPASS assertion at the start
of the tmpfs_lookup() reported by many.
Submitted by: kib
First, a file is mmap(2)ed and then mlock(2)ed. Later, it is truncated.
Under "normal" circumstances, i.e., when the file is not mlock(2)ed, the
pages beyond the EOF are unmapped and freed. However, when the file is
mlock(2)ed, the pages beyond the EOF are unmapped but not freed because
they have a non-zero wire count. This can be a mistake. Specifically,
it is a mistake if the sole reason why the pages are wired is because of
wired, managed mappings. Previously, unmapping the pages destroys these
wired, managed mappings, but does not reduce the pages' wire count.
Consequently, when the file is unmapped, the pages are not unwired
because the wired mapping has been destroyed. Moreover, when the vm
object is finally destroyed, the pages are leaked because they are still
wired. The fix is to reduce the pages' wired count by the number of
wired, managed mappings destroyed. To do this, I introduce a new pmap
function pmap_page_wired_mappings() that returns the number of managed
mappings to the given physical page that are wired, and I use this
function in vm_object_page_remove().
Reviewed by: tegge
MFC after: 6 weeks
If it is set to zero value (default) dummynet module will try to emulate
real link as close as possible (bandwidth & latency): packet will not leave
pipe faster than it should be on real link with given bandwidth.
(This is original behaviour of dummynet which was altered in previous commit)
If it is set to non-zero value only bandwidth is enforced: packet's latency
can be lower comparing to real link with given bandwidth.
- Document recently introduced dummynet(4) sysctl variables.
Requested by: luigi, julian
MFC after: 3 month
with ACCESSPERMS. Document in mount_ntfs(8) only the nine
low-order bits of mask are used (taken from mount_msdosfs(8)).
PR: kern/114856
Submitted by: Ighighi
MFC after: 1 month
In case attach fails because of the priv check we leaked the
memory and left so_pcb as fodder for invariants.
Reported by: Pawel Worach
Reviewed by: rwatson
- Implement timing out of VPD register access.[1]
- Fix an off-by-one error of freeing malloc'd space when checksum is invalid.
- Fix style(9) bugs, i.e., sizeof cannot be followed by space.
- Retire now obsolete 'hw.pci.enable_vpd' tunable.
Submitted by: cokane (initial revision)[1]
Reviewed by: marius (intermediate revision)
Silence from: jhb, jmg, rwatson
Tested by: cokane, jkim
MFC after: 3 days
The register layout is little different from memory-mapped stats
in the previous generation chips. In fact, it is bad because
registers in this range are cleared after reading them.
Reviewed by: scottl
MFC after: 3 days
- Trying to eliminate another racing by replacing the timeout(9) with
callout APIs. In addition to that, the callout_drain() in an_detach()
help us to avoid a possible panic-on-free due to the callout API tries
to lock a destroyed mutex.
- In an_stats_update(), check the return value of an_read_record(). This
should reduce the chance of device removal(PCCARD) panic [2].
- Adding a comment to state the fact that an_stats_update() is now called
via callout(9) with a lock held [2].
Submitted by: jhb [1], ambrisko [2]
Reviewed by: jhb, ambrisko
Reported by: dhw
Tested by: dhw
MFC after: 3 days
priorities of the technologies supported by 802.3 Selector Field
value.
1000BASE-T full duplex
1000BASE-T
100BASE-T2 full duplex
100BASE-TX full duplex
100BASE-T2
100BASE-T4
100BASE-TX
10BASE-T full duplex
10BAST-T
However PHY drivers didn't honor the order such that 100BASE-T4 had
higher priority than 100BASE-TX full duplex. Fix that long standing
bugs such that have PHY drivers choose the highest common denominator
ability.
Fix a bug in dcphy which inadvertently aceepts 100BASE-T4.
PR: 92599
- Populate the register values for the trapframe put on the stack by the
double fault handler.
- Teach DDB's trace routine to treat a double fault like other trap frames.
MFC after: 3 days
process_fini, thread_ctor, thread_dtor, thread_init, thread_fini. This
will allow us to extend dynamically areas in proc/thread for dtrace ;-)
Reviewed by: rwatson
- process_ctor,dtor, init and fini
- thread_ctor,dtor, init and fini
This allows the ability to add on additional things
during construction/destruction of threads and processes.
Reviewed by: rwatson
communicate that it relates to (is called by) thread_alloc()
o Add cpu_thread_free() which is called from thread_free()
to counter-act cpu_thread_alloc().
i386: Have cpu_thread_free() call cpu_thread_clean() to
preserve behaviour.
ia64: Have cpu_thread_free() call mtx_destroy() for the
mutex initialized in cpu_thread_alloc().
PR: ia64/118024
removing some copy&pasted code.
- Reduce copy and paste in ng_apply_item().
- Resurrect ng_send_fn() as a valid symbol, not a define.
Reviewed by: mav, julian
opposed to what process. Since threads by default have teh name of the
process unless over-written with more useful information, just print the
thread name instead.
sys/dev/acpica/acpi.c rev 1.196 a while ago:
Grab Giant around calls to DEVICE_SUSPEND/RESUME in
acpi_SetSleepState().
If we are resuming non-MPSAFE drivers, they need Giant held for them.
This may fix some obscure suspend/resume problems. It has fixed keyrate
setting problems that were triggered by cardbus (MPSAFE) changing the
ordering for syscons resume (non-MPSAFE). Also, add some asserts that
Giant is held in our suspend/resume and shutdown methods.
Submitted by: Marko Zec
amd64 mechanism over. Instead of page table hackery that isn't
actually needed, just use 'struct pcpu __pcpu[MAXCPU]' for backing like
all the other platforms do. Get rid of 'struct privatespace' and a
while mess of #ifdef SMP garbage that set it up. As a bonus, this
returns the 4MB of KVA that we stole to implement it the old way.
This also allows you to read the pcpu data for each cpu when reading a
minidump.
Background information: Originally, pcpu stuff was implemented as having
per-cpu page tables and magic to make different data structures appear
at the same actual address. In order to share page tables, we switched
to using the GDT and %fs/%gs to access it. But we still did the evil
magic to set it up for the old way. The "idle stacks" are not used
for the idle process anymore and are just used for a few functions during
bootup, then ignored. (excercise for reader: free these afterwards).
that the driver will handle WEP encryption. However, this does not seem to be
implemented by this driver (or maybe the chipset doesn't support it?)
Removing the flag makes my wpi card work using wpa_supplicant(8) on a
network with 802.1x security (without this change it authenticated fine, but
tcpdump only saw garbage packets)
Reviewed by: benjsc, imp (mentor)
Approved by: imp (mentor), sam
frequency from OpenFirmware moved out and into a routine that is called
from cpu_startup().
This allows correct reporting of the CPU clockspeed when printing out
CPU information at boot time.
Reported by: numerous
Reviewed by: marcel
MFC after: 1 day
Enhanced Disk Drive Specification Ver 3.0 defines that the version
of extension in AH would be 30h.
Correct the check for that to be >=30h instead of >3h.
MFC after: 2 months
from messing with the spdb and sadb.
Problem sneaked in with the fast_ipsec+v6->ipsec merger by no
longer going via raw_usrreqs.pr_attach.
Reported by: Pawel Worach
Identified by: rwatson
Reviewed by: rwatson
MFC after: 3 days
bumped to 800004 to note the change though userland apps should not be
affected since they use <sys/agpio.h> rather than the headers in
sys/dev/agp.
Discussed with: anholt
Repocopy by: simon
and update the rx code to handle multiple frames in a single usb
transfer. AX772 parts (at least) exhibit many input errors when
operated with a 2K rx buffer and no errors w/ a 4K rx buffer (it's
unclear what the cause of the errors is for 2K so this may just be
covering up the real issue). Larger rx buffer sizes show no
significant performance improvement for AX772. Bypassing the common
buffer management routines also eliminates an extra context switch
on every packet which noticeably improves performance (TCP netperf
rx goes from 45 Mb/s to 85 MB/s).
Submitted by: "J.R. Oldroyd" <fbsd@opal.com>
Reviewed by: imp
Obtained from: openbsd (partly)
MFC after: 3 weeks
The reliability of it's multi DAC / playback channels is
not that good. Enabling vchans make the bug more visible
since playback allocation will look for possible free
hardware channels first (i.e: the next DAC, the very first
has been consumed by vchan mixer) which in this case has
been proven faulty.
Reported / Tested by: Sascha Klauder
MFC after: 3 days
This includes:
o mtree (for legal/intel_wpi)
o manpage for i386/amd64 archs
o module for i386/amd64 archs
o NOTES for i386/amd64 archs
Approved by: mlaier (comentor)
proc_rwmen.
Otherwise copy on write may create an anonymous page that is
not marked as dirty. Since writing data to these pages
in this function also does not dirty these pages they may be
later discarded by the pagedaemon.
- Use unit2minor() and minor2unit() to generate minor numbers to support
unit numbers higher than 255.
- Use simple string operations on the 'names' array rather than hard-coded
constants and switch statements so that more ptys can be added by simply
expanding the 'names' array.
MFC after: 1 week
lock optimized for almost exclusive reader access. (see also rmlock.9)
TODO:
Convert to per cpu variables linkerset as soon as it is available.
Optimize UP (single processor) case.
- Patch registers CR47 and CR157 on devices that require it.
- Fix power calibration setting on ZD1211B.
Obtained from: OpenBSD
- Fix multicast transfer by properly reprogram multicast global
hash table, which in turns fix promiscuous mode and IPv6
autoconfiguration / local networking.
Reviewed by: sam, Weongyo Jeong
Tested using: Aztech WL230 , Belkin F5D7050, Unicorn WL-54G,
3COM 3CRUSB10075
MFC after: 1 week
I've tried to move md(4) to use geom_disk class, like real disks do, but
this requires major rework of some of the existing features such as
configuration dumping for example. Therefore just putting devstat support
directly into md(4) seems to be optimal solution.
Now you can see md(4) stats in `systat -vm' again.
MFC after: 2 weeks
present on the MacBook, MacBook Pro, and Intel MacMini.
This driver exports information via sysctl in its private sysctl tree
dev.asmc.*. You can get information about temperatures, fan speeds, the
keyboard light sensor and the Sudden Motion Sensor (SMS).
The SMS is very useful to park the disk heads when the laptop is
moved. Basically, the SMS is setup so that, under movement, we get an
interrupt on irq 6 and a devd notification is sent.
Sponsored by: Google Summer of Code 2007
Approved by: njl (mentor)
Reviewed by: attilio (previous version, but very similar), jhb (interrupt
specific review)
LINUX_SIOCGIFCOUNT just returns 0 since it is not implemented in the
Linux 2.6.16.
LINUX_SIOCGIFINDEX/LINUX_SIOGIFINDEX are mapped to the FreeBSD native
SIOCGIFINDEX.
Tested by: Peter Kostouros <kpeter@melbpc.org.au>
Reviewed by: brooks, rpaulo (on net@)
Submitted by: rdivacky
MFC after: 1 week
2) Alter packet flow inside dummynet: allow certain packets to bypass
dummynet scheduler. Benefits are:
- lower latency: if packet flow does not exceed pipe bandwidth, packets
will not be (up to tick) delayed (due to dummynet's scheduler granularity).
- lower overhead: if packet avoids dummynet scheduler it shouldn't reenter ip
stack later. Such packets can be fastforwarded.
- recursion (which can lead to kernel stack exhaution) eliminated. This fix
long existed panic, which can be triggered this way:
kldload dummynet
sysctl net.inet.ip.fw.one_pass=0
ipfw pipe 1 config bw 0
for i in `jot 30`; do ipfw add 1 pipe 1 icmp from any to any; done
ping -c 1 localhost
3) Three new sysctl nodes are added:
net.inet.ip.dummynet.io_pkt - packets passed to dummynet
net.inet.ip.dummynet.io_pkt_fast - packets avoided dummynet scheduler
net.inet.ip.dummynet.io_pkt_drop - packets dropped by dummynet
P.S. Above comments are true only for layer 3 packets. Layer 2 packet flow
is not changed yet.
MFC after: 3 month
while other variants have inorder ethernet address for the same
chipset. Override ethernet address ordering if we already know how
it was stored. This fixes the use of inversed ethernet address on
MCP67.
Submitted by: ariff
MFC after: 3 days
Allocate space in keyboard state structure instead to prevent random byte
from possibly overwritten stack location frombeing shoved into USB device
when transfer actually takes place.
This fixes at least one instance of LEDs not working with USB keyboards.
characters (mostly "&"). Because top(1) shows only first six characters of
wait channel, without this change we saw only one meaningful character.
Requested by: kris & others
MFC after: 1 week
must be globally performed before calling any of the TLB invalidation
functions.
With one exception, on amd64, this requirement was already met. Fix this
one case. Also, as a clarification, change an existing atomic op into a
release. (Suggested by: jhb)
Reported and reviewed by: ups
MFC after: 3 days
o do not override the home channel recorded for the sta when the frame is
received off-channel; this fixes a problem where we might think the sta
was operating on the channel the frame was received on causing association
requests to be ignored/rejected (likely cause of kern/99036)
o don't include rssi of off-channel frames in the avg rssi used to select
a bss; this gives us a better estimate of the signal we will see for the
station when on-channel
PR: kern/99036
Found by: Yubin Gong
Reviewed by: sephe
MFC after: 1 week
This import includes:
o wpi Wireless driver for the Intel 3945 Wireless Lan Controller (802.11abg) (sys/dev/wpi)
o Intel firmware revision 2.14.4 & associated LICENSE (sys/dev/contrib/wpi, sys/contrib/dev/wpi/LICENSE)
o wpifw Firmware driver (sys/modules/wpifw)
Approved by: mlaier, sam (co-mentors)
silent NULL pointer dereference in the i386 and sparc64 pmap_pinit()
when the kmem_alloc_nofault() failed to allocate address space. Both
functions now return error instead of panicing or dereferencing NULL.
As consequence, vmspace_exec() and vmspace_unshare() returns the errno
int. struct vmspace arg was added to vm_forkproc() to avoid dealing
with failed allocation when most of the fork1() job is already done.
The kernel stack for the thread is now set up in the thread_alloc(),
that itself may return NULL. Also, allocation of the first process
thread is performed in the fork1() to properly deal with stack
allocation failure. proc_linkup() is separated into proc_linkup()
called from fork1(), and proc_linkup0(), that is used to set up the
kernel process (was known as swapper).
In collaboration with: Peter Holm
Reviewed by: jhb
default object rather than cache it was to have
vm_pager_has_page(object, pindex, ...) == FALSE to imply that there is
no cached page in object at pindex. This allows to avoid explicit
checks for cached pages in vm_object_backing_scan().
For now, we need the same bandaid for the swap object, otherwise both
the vm_page_lookup() and the pager can report that there is no page at
offset, while page is stored in the cache. Also, this fixes another
instance of the KASSERT("object type is incompatible") failure in the
vm_page_cache_transfer().
Reported and tested by: Peter Holm
Reviewed by: alc
MFC after: 3 days
