Any sensible workflow will include a revision control system from which
to restore the old files if required. In normal usage, developers just
have to clean up the mess.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D7353
calling in_pcbnotifyall().
This avoids lock contention on tcbinfo due to in_pcbnotifyall()
holding the tcbinfo write lock while walking all connections.
Reviewed by: rrs, karels
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D7251
code in this file was written by Robert N. M. Waston.
Move cr_can* prototypes from sys/systm.h to sys/proc.h
Reported by: rwatson
Reviewed by: rwatson
Approved by: sjg (mentor)
Differential Revision: https://reviews.freebsd.org/D7345
POSIX allows these functions to be implemented in a way that the
resulting string is stored in the input buffer. Though some may find
this annoying, this has the advantage that it makes it possible to
implement this function in a thread-safe way. It also means that they
can be implemented in a way that they work for paths of arbitrary
length, as the output string of these functions is never longer than
max(1, len(input)).
Portable code already needs to be written with this in mind, so in my
opinion it makes very little sense to allow the existing behaviour.
Prevent the base system from falling back to this by switching over to
POSIX prototypes.
I'm not going to bump the __FreeBSD_version for this. The reason is that
it's possible to account for this change in a portable way, without
depending on a specific version of FreeBSD. An exp-run was done some
time ago. As far as I know, all regressions as a result of this have
already been fixed.
I'll give this change some time to settle. In the long run I want to
replace our copies by ones that are thread-safe and don't depend on
PATH_MAX/MAXPATHLEN.
Pull copies of the input pathname string before calling basename() and
dirname() to make this comply to POSIX. Free these copies at the end of
this function. While there, remove the duplication of the 's' ->
'logfname' string. There is no need for this.
In particular, swapongeom_ev() needed event thread context when swap
pager configuration was performed under Giant and geom asserted that
Giant is not owned. Now both of the reason went away.
On the other hand, note that swpageom_release() is called from the
bio_done context, and possible close cannot be performed inline.
Also fix some minor issues. The swapgeom() function does not use the
td argument, remove it. Recheck that the vnode passed is still VCHR
and not reclaimed after the lock.
Reviewed by: mav
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Pull a copy of the filename string before calling basename(). Change the
loop to not return on its own, so we can put a free() statement at the
bottom.
POSIX allows these functions to modify their input buffer, so that they
have storage for the return value. Pull copies of the filename before
calling these utility functions.
The linker script CONSTRUCTORS keyword is only meaningful "when linking
object file formats which do not support arbitrary sections, such as
ECOFF and XCOFF"[1] and is ignored for other object file formats.
LLVM's lld does not yet accept (and ignore) CONSTRUCTORS, so just remove
CONSTRUCTORS from the linker scripts as it has no effect.
[1] https://sourceware.org/binutils/docs/ld/Output-Section-Keywords.html
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7343
It looks like the msgrcv() system call is already written in such a way
that the size is internally computed as a size_t and written into all of
td_retval[0]. This means that it is effectively already returning
ssize_t. It's just that the userspace prototype doesn't match up.
New design allows hardware resources to be split between several consumers.
For example, one BAR can be dedicated for remote memory access, while other
resources can be used for packet transport for virtual Ethernet interface.
And even without resource split, this code allows to specify which consumer
driver should attach the hardware.
From some points this makes the code even closer to Linux one, even though
Linux does not provide the described flexibility.
POSIX also declares NI_NUMERICSCOPE, which makes getnameinfo() return a
numerical scope identifier. The interesting thing is that support for
this is already present in code, but #ifdef disabled. Expose this
functionality by placing a definition for it in <netdb.h>.
While there, remove references to NI_WITHSCOPEID, as that got removed 11
years ago.
POSIX requires that MB_CUR_MAX expands to an expression of type size_t.
It currently expands to an int. As these are already macros, don't
change the underlying type of these functions. There is no ned to touch
those.
Differential Revision: https://reviews.freebsd.org/D6645
specifics of callout KPI. Esp., do not depend on the exact interface
of callout_stop(9) return values.
The main change is that instead of requiring precise callouts, code
maintains absolute time to wake up. Callouts now should ensure that a
wake occurs at the requested moment, but we can tolerate both run-away
callout, and callout_stop(9) lying about running callout either way.
As consequence, it removes the constant source of the bugs where
sleepq_check_timeout() causes uninterruptible thread state where the
thread is detached from CPU, see e.g. r234952 and r296320.
Patch also removes dual meaning of the TDF_TIMEOUT flag, making code
(IMO much) simpler to reason about.
Tested by: pho
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D7137
callout_when(9). See the man page update for the description of the
intended use.
Tested by: pho
Reviewed by: jhb, bjk (man page updates)
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
X-Differential revision: https://reviews.freebsd.org/D7137
target. Due to a way issignal() selects the next signal to deliver
and report, if the simultaneous or already pending another signal
exists, that signal might be reported by the next waitpid(2) call.
This causes minor annoyance for debuggers, which must be prepared to
take any signal as the first event, then filter SIGSTOP later.
More importantly, for tools like gcore(1), which attach and then
detach without processing events, SIGSTOP might leak to be delivered
after PT_DETACH. This results in the process being unintentionally
stopped after detach, which is fatal for automatic tools.
The solution is to force SIGSTOP to be the first signal reported after
the attach. Attach code is modified to set P2_PTRACE_FSTP to indicate
that the attaching ritual was not yet finished, and issignal() prefers
SIGSTOP in that condition. Also, the thread which handles
P2_PTRACE_FSTP is made to guarantee to own p_xthread during the first
waitpid(2). All that ensures that SIGSTOP is consumed first.
Additionally, if P2_PTRACE_FSTP is still set on detach, which means
that waitpid(2) was not called at all, SIGSTOP is removed from the
queue, ensuring that the process is resumed on detach.
In issignal(), when acting on STOPing signals, remove the signal from
queue before suspending. Otherwise parallel attach could result in
ptracestop() acting on that STOP as if it was the STOP signal from the
attach. Then SIGSTOP from attach leaks again.
As a minor refactoring, some bits of the common attach code is moved
to new helper proc_set_traced().
Reported by: markj
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7256
* Makes the TX DMA stopping more similar to Linux code, and potentially
a bit faster. Also, output an error message when TX DMA idling fails.
Taken-From: Linux iwlwifi
Tested:
* AC3165, STA mode
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD git 2ee486ddff973ac552ff787c17e8d83e8ae0f24c
Differential Revision: https://reviews.freebsd.org/D7325
When building a Tx Command for management frames, we are lacking
a check for action frames, for which we should set a different
pm_timeout. This cause the fw to stay awake for 100TU after each
such frame is transmitted, resulting an excessive power consumption.
Taken-From: Linux iwlwifi (git b084a35663c3f1f7)
Approved by: adrian (mentor)
Obtained from: Linux git b084a35663c3f1f7de1c45c4ae3006864c940fe7
Obtained from: DragonFlyBSD git ba00f0e3ae873d6f0d5743e22c3ebc49c44dfdac
Differential Revision: https://reviews.freebsd.org/D7324
The PROT_REQUIRE flag in should be set for data frames above a certain
length, but we were setting it for !data frames above a certain length,
which makes no sense at all.
Taken-From: OpenBSD, Linux iwlwifi
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD git 8cc03924a36c572c2908e659e624f44636dc2b33
Differential Revision: https://reviews.freebsd.org/D7323
- Move cr_canseeinpcb to sys/netinet/in_prot.c in order to separate the
INET and INET6-specific code from the rest of the prot code (It is only
used by the network stack, so it makes sense for it to live with the
other network stack code.)
- Move cr_canseeinpcb prototype from sys/systm.h to netinet/in_systm.h
- Rename cr_seeotheruids to cr_canseeotheruids and cr_seeothergids to
cr_canseeothergids, make them non-static, and add prototypes (so they
can be seen/called by in_prot.c functions.)
- Remove sw_csum variable from ip6_forward in ip6_forward.c, as it is an
unused variable.
Reviewed by: gnn, jtl
Approved by: sjg (mentor)
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D2901
AIO write requests for a TOE socket on a Chelsio T4+ adapter can now
DMA directly from the user-supplied buffer. This is implemented by
wiring the pages backing the user-supplied buffer and queueing special
mbufs backed by raw VM pages to the socket buffer. The TOE code
recognizes these special mbufs and builds a sglist from the VM page
array associated with the mbuf when queueing a work request to the TOE.
Because these mbufs do not have an associated virtual address, m_data
is not valid. Thus, the AIO handler does not invoke sosend() directly
for these mbufs but instead inlines portions of sosend_generic() and
tcp_usr_send().
An aiotx_buffer structure is used to describe the user buffer (e.g.
it holds the array of VM pages and a reference to the AIO job). The
special mbufs reference this structure via m_ext. Note that a single
job might be split across multiple mbufs (e.g. if it is larger than
the socket buffer size). The 'ext_arg2' member of each mbuf gives an
offset relative to the backing aiotx_buffer. The AIO job associated
with an aiotx_buffer structure is completed when the last reference to
the structure is released.
Zero-copy aio_write()'s for connections associated with a given
adapter can be enabled/disabled at runtime via the
'dev.t[45]nex.N.toe.tx_zcopy' sysctl.
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
'wchar_t' is 7 characters long, not 6. r303297 fixed this in libelftc,
but not the second copy of this file that we have in libcxxrt.
PR: 208661
Submitted by: Daniel McRobb
Obtained from: ELF Tool Chain r3480
MFC after: 3 days
