on i386 and amd64 machines. The overall process is that /boot/pmbr lives
in the PMBR (similar to /boot/mbr for MBR disks) and is responsible for
locating and loading /boot/gptboot. /boot/gptboot is similar to /boot/boot
except that it groks GPT rather than MBR + bsdlabel. Unlike /boot/boot,
/boot/gptboot lives in its own dedicated GPT partition with a new
"FreeBSD boot" type. This partition does not have a fixed size in that
/boot/pmbr will load the entire partition into the lower 640k. However,
it is limited in that it can only be 545k. That's still a lot better than
the current 7.5k limit for boot2 on MBR. gptboot mostly acts just like
boot2 in that it reads /boot.config and loads up /boot/loader. Some more
details:
- Include uuid_equal() and uuid_is_nil() in libstand.
- Add a new 'boot' command to gpt(8) which makes a GPT disk bootable using
/boot/pmbr and /boot/gptboot. Note that the disk must have some free
space for the boot partition.
- This required exposing the backend of the 'add' function as a
gpt_add_part() function to the rest of gpt(8). 'boot' uses this to
create a boot partition if needed.
- Don't cripple cgbase() in the UFS boot code for /boot/gptboot so that
it can handle a filesystem > 1.5 TB.
- /boot/gptboot has a simple loader (gptldr) that doesn't do any I/O
unlike boot1 since /boot/pmbr loads all of gptboot up front. The
C portion of gptboot (gptboot.c) has been repocopied from boot2.c.
The primary changes are to parse the GPT to find a root filesystem
and to use 64-bit disk addresses. Currently gptboot assumes that the
first UFS partition on the disk is the / filesystem, but this algorithm
will likely be improved in the future.
- Teach the biosdisk driver in /boot/loader to understand GPT tables.
GPT partitions are identified as 'disk0pX:' (e.g. disk0p2:) which is
similar to the /dev names the kernel uses (e.g. /dev/ad0p2).
- Add a new "freebsd-boot" alias to g_part() for the new boot UUID.
MFC after: 1 month
Discussed with: marcel (some things might still change, but am committing
what I have so far)
a module was loaded might make the pathname inaccurate.
I wonder if an inode reference should be stored with the pathname
to allow a validity check?
Suggested by: rwatson@
threading library.
- Now that libpthread is a symlink, it's no longer possible
to link applications with libpthread and have libmap.conf(5)
select the desired threading library; applications will be
linked to the default threading library, libkse or libthr.
Remove an obsolete paragraph.
- Mention that improvements can be seen compared to libkse.
Reviewed by: deischen, davidxu
for kldstat(2).
This allows libdtrace to determine the exact file from which
a kernel module was loaded without having to guess.
The kldstat(2) API is versioned with the size of the
kld_file_stat structure, so this change creates version 2.
Add the pathname to the verbose output of kldstat(8) too.
MFC: 3 days
aligned, GCC 4.2.1 also generates code for sendudp() that assumes
this alignment. GCC 4.2.1 however doesn't 32-bit align wbuf, causing
the loader to crash due to an unaligned access of wbuf in sendudp()
when netbooting sparc64. Solve this by specifying wbuf as packed and
32-bit aligned, too. As for lastdata and readudp() this currently is
no issue when compiled with GCC 4.2.1, though give lastdata the same
treatment as wbuf for consistency and possibility of being affected
in the future. [1]
- Sprinkle const on a lookup table.
Reported by: marcel [1]
Submitted by: yongari [1]
Reviewed by: marcel [1]
MFC after: 5 days
test MK_INSTALLLIB, users can set WITHOUT_INSTALLLIB. The old
NO_INSTALLLIB is still supported as several makefiles set it.
- While here, fix an install when instructed not to install libs
(usr.bin/lex/lib/Makefile).
PR: bin/114200
Submitted by: Henrik Brix Andersen
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
for wide characters locales in the argument range >= 0x80 - they may
return false positives.
Example 1: for UTF-8 locale we currently have:
iswspace(0xA0)==1 and isspace(0xA0)==1
(because iswspace() and isspace() are the same code)
but must have
iswspace(0xA0)==1 and isspace(0xA0)==0
(because there is no such character and all others in the range
0x80..0xff for the UTF-8 locale, it keeps ASCII only in the single byte
range because our internal wchar_t representation for UTF-8 is UCS-4).
Example 2: for all wide character locales isalpha(arg) when arg > 0xFF may
return false positives (must be 0).
(because iswalpha() and isalpha() are the same code)
This change address this issue separating single byte and wide ctype
and also fix iswascii() (currently iswascii() is broken for
arguments > 0xFF).
This change is 100% binary compatible with old binaries.
Reviewied by: i18n@
success and zero pid from pidfile_read(). Return EAGAIN instead. Sleep
up to three times for 5 ms while waiting for pidfile to be written.
mount(8) does the kill(mountpid, SIGHUP). If mountd pidfile is truncated,
that would result in the SIGHUP delivered to the mount' process group
instead of the mountd.
Found and analyzed by: Peter Holm
Tested by: Peter Holm, kris
Reviewed by: pjd
MFC after: 1 week
In particular, the previous code led to archives that had
non-empty bodies following directory entries. Not a fatal
problem, as bsdtar and GNU cpio are both happy to just skip
this bogus data, but it still shouldn't be there.
MFC after: 3 days
Return EOF immediately if an entry in a ZIP archive has no body.
In particular, the latter issue was causing bsdtar to emit spurious
warnings when extracting directory entries from ZIP archives.
MFC after: 3 days
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
to an int to remove the warning from using a size_t variable on 64-bit
platforms.
Submitted by: Xin LI <delphij@FreeBSD.org>
Approved by: wes
Approved by: re (kensmith)
as they would have been translated from partitions of type "GPT".
This fixes sysinstall, now that geom_part has taken over from
geom_gpt.
Approved by: re (kensmith)
number of bytes written, even when used to write files to
disk. Extend the test suite to verify the correct return
values for archive_write_data() and archive_write_data_block().
Thanks to: Bruce Mah, for stepping in promptly to back out the
earlier broken version of this fix
Thanks to: Colin Percival, for pointing out the correct fix
MFC after: 5 days
Approved by: re (ksmith)
Pointy hat: \me
