Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Implement simple chain loader in loader; this update does add chain command,
taking device or file as argument to load and start new boot loader.
In case of BIOS, the chain will read the boot block to address 0000:7c00 and
jumps on it. In case of UEFI, the chain command is to be used with efi
application, typically stored in EFI System Partition.
The update also does add simple menu entry, if the variable chain_disk is set.
The value of the variable chain_disk is used as argument for chain loading.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5992
The current read from network is working from up to down - we have some
protocol needing the data from the network, so we build the buffer space
for that protocol, add the extra space for headers and pass this buffer
down to be filled by nif get call in hope, we have guessed the incoming
packet size right. Amazingly enough this approach mostly does work, but
not always...
So, this update does work from down to up - we allocate buffer (based
on MTU or frame size info), fill it up, and pass on for upper layers.
The obvious problem is that when we should free the buffer - if at all.
In the current implementation the upper layer will free the packet on error
or when the packet is no longer needed.
While working on the issue, the additional issue did pop up - the bios
implementation does not have generic get/put interface but is using pxe
udpsend/udpreceive instead. So the udp calls are gone and undi interface
is implemented instead. Which in turn means slight other changes as we
do not need to have duplicated pxe implementation and can just use dev_net.
To align packet content, the actual read from nic is using shifted buffer by
ETHER_ALIGN (2).
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D10232
The current reboot command in efi/loader/main.c is passing extra data with
ResetSystem, however, UEFI spec 2.6, page 265 does state:
"ResetData is only valid if ResetStatus is something other than EFI_SUCCESS
unless the ResetType is EfiResetPlatformSpecific where a minimum amount of
ResetData is always required."
Therefore we should use DataSize 0 and ResetData NULL - those are two last
arguments for the call.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D10562
With the zfs probe cleanup, the mistake did slip in the probe code;
instead of reading the pool GUID for the actual boot device (partition),
we read GUID for first found pool from the boot disk.
This will break the case when there are both zfs pool and ufs on the boot
disk, and the ufs is used for boot, not zfs.
Reviewed by: smh
Differential Revision: https://reviews.freebsd.org/D10359
GNU GCC does does recognise it as a valid option and we already
use -mgeneral-regs-only that has the desired effect.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D10306
The current zfs reader is only checking first label from each device, however,
we do have 4 labels on device and we should check all 4 to be protected
against disk failures and incomplete label updates.
The difficulty is about the fact that 2 label copies are in front of the
pool data, and 2 are at the end, which means, we have to know the size of
the pool data area.
Since we have now the mechanism from common/disk.c to use the partition
information, it does help us in this task; however, there are still some
corner cases.
Namely, if the pool is created without partition, directly on the disk,
and firmware will give us the wrong size for the disk, we only can check
the first two label copies.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D10203
The current efi_zfs_probe() is overcomplicated and can be made
simpler. Still we need to pick up the device handle for our boot
disk first, because the ESP does not have to be the first partition on the
disk.
Once we do have the handle for boot disk, we probe that disk with
pointer for pool GUID.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D10198
self_reloc.c doesn't initialize `rel` in all cases in the C code, however, the value
might be initialized properly on the stack in the assembly code.
For right now (because this doesn't seem to be breaking anything and my initializing
the stack value could break something since it's called from assembly code) disable
the warning for self_reloc.c. More investigation should be done to determine the
appropriate response to this warning (either intialize the value or find a smarter
way to deal with the warning).
A long MFC timeout is being set for this change to allow a better solution for the
issue to be developed in that time period.
MFC after: 2 months
Reported by: Jenkins (FreeBSD-head-amd64-gcc job)
Tested with: amd64-gcc-6.3.0 (devel/amd64-xtoolchain-gcc)
Sponsored by: Dell EMC Isilon
Some other hypervisors like Xen can pretend to be Hyper-V but obviously
they can't implement all Hyper-V features. Let's make sure we're genuine
Hyper-V here.
Also fix some minor coding style issues.
PR: 211746
MFC after: 2 weeks
Sponsored by: Microsoft
The 2 files may not exist on other archs like aarch64 and hence we
can have a build failure there.
Reported by: lwhsu
MFC after: 2 weeks
Sponsored by: Microsoft
Doing this on physical hosts turns out to be problematic, e.g. see comment
24 and 28 in https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=211746.
To fix the real underlying issue correctly & thoroughly, IMO we need
a relocatable kernel, but that would require a lot of complicated long
term work: https://reviews.freebsd.org/D9686?id=25414#inline-56969
For now, let's only apply efi_verify_staging_size() to VMs running on
Hyper-V, and restore the old behavior on physical machines since that
has been working for people for a long period of time, though that's
potentially unsafe...
MFC after: 2 weeks
Sponsored by: Microsoft
r314828(loader.efi: fix an off-by-one bug in efi_verify_staging_size())
doesn't really fix the bug and this patch adds the missing part.
It's a shame that I didn't make everything correct at the very beginning...
MFC after: 2 weeks
Sponsored by: Microsoft
Also remove the warning message: it may not be unusual to see
the memory range containing 2MB is not of EfiConventionalMemory.
MFC after: 2 weeks2 weeks
Sponsored by: Microsoft
This patch fixes my recent patch
"loader.efi: reduce the size of the staging area if necessary", which
causes EFI-boot failure on physical machines since Mar 2:
on the host there is a 1MB LoaderData memory range, which splits
the big Conventional Memory range into a small one (15MB) and a
big one: the small one is too small to hold the staging area.
We can actually use the LoaderData range safely, because when
amd64_tramp -> efi_copy_finish() starts to run, we're almost at
the very end of the efi loader code and we're going to "return"
to the kernel entry, so we're pretty sure we won't access any loader
data any more.
For people who are interested in the details: please see
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=211746#c22
PS, some people also reported the regression happened to FreeBSD VM
running on Bhyve in EFI mode. This patch should resolve it too,
though I don't have such a setup to test.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 2 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D9904
The loader assumes physical memory in [2MB, 2MB + EFI_STAGING_SIZE)
is Conventional Memory, but actually it may not, e.g. in the case
of Hyper-V Generation-2 VM (i.e. UEFI VM) running on Windows
Server 2012 R2 host, there is a BootServiceData memory block at
the address 47.449MB and the memory is not writable.
Without the patch, the loader will crash in efi_copy_finish():
see PR 211746.
The patch verifies the end of the staging area, and reduces its
size if necessary. This way, the loader will not try to write into
the BootServiceData memory any longer.
Thank Marcel Moolenaar for helping me on this issue!
The patch also allocates the staging area in the first 1GB memory.
See the comment in the patch for this.
PR: 211746
Reviewed by: marcel, kib, sephe
Approved by: sephe (mentor)
MFC after: 2 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D9686
Rewrite EFI part device interface to present disk devices in more
user friendly way.
We keep list of three types of devices: floppy, cd and disk, the
visible names: fdX: cdX: and diskX:
Use common/disk.c and common/part.c interfaces to manage the
partitioning.
The lsdev -l will additionally list the device path.
Reviewed by: imp, allanjude
Approved by: imp (mentor), allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8581
Since we have dedicated libefi/env.c file for variable support, the following
changes are done:
Simple cstyle changes in env.c
Moved efi variable related commands from loader/main.c to libefi/env.c
Did create function to set "efi-version" environment variable in env.c.
This function does serve two purposes: for first a small clean up of the
loader main(), and for second, it does replace the otherwise unused
efi_variable_support hack.
A bit of cleanup of ficl backend functions. The TEST_MAIN has no meaning,
and removed few memory leaks.
The forth code is updated to use "efi-version" variable, instead of ficl
environment check.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D9165
The find_currdev() is using variable "copy" to store the reference to trimmed
devpath pointer, if for some reason the efi_devpath_handle() fails, we will
leak this copy.
Also we can simplify the code there a bit.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9191
Fix section pattern code to exclude .rel.data.* sections from being
merged into .data. Otherwise relocations in those sections are lost
in final binary
Reviewed by: andrew
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9108
__bss_end should not be included in .bss zeroing code. Otherwise first 4
bytes of the section that follows .bss (in loader's case it's .sdata) are
overwritten by zero.
Reviewed by: andrew
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9108
The Makefile rule to create vers.c for loader version info was
previously duplicated in each of the various loader Makefiles.
Instead, share a common rule in Makefile.inc.
Reviewed by: bapt
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8841
Instead of repeating "%s, Revision %s" "(%s %s)" in each loader, just
create the full version string in vers.c
Reviewed by: bapt
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8823
This change does modify devsw dv_print() to return the int value,
enabling walkers to interrupt the walk on non zero value from dv_print().
This will allow the pager_print actually to stop displaying data on
user input, and additionally pager is used in various *dev_print callbacks,
where it was missing.
For test, lsdev [-v] command should display data by screenfuls and should
stop when the key 'q' is pressed on pager prompt.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D5461
first EFI device if we can't find the one from which the image was loaded.
Reviewed by: allanjude,imp,jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6780
* On arm64 we need to use the ${MACHINE_CPUARCH} subdirectory.
* env.c is only needed when using forth so only build it there.
Sponsored by: ABT Systems Ltd
environment variable to allow conditional compilation based on EFI
being present or not. Provide efi-setenv, efi-getenv, and
efi-unsetenv, though those need improvement. Move the efi definition
to libefi (but include a reference so they get included).
etc. can find out where the SMBIOS entry point is located. In pure
UEFI mode the BIOS is not mapped into the standard address space so the
SMBIOS table might not appear between 0xf0000 and 0xfffff. The
UEFI environment can report this the location of the anchor. If it is
reported then expose it as hint.smbios.0.mem. This can then be used
by other tools. However, we should make smbios(4) useful and have it
take this value and provide accesor function so ipmi(4) etc. don't
have to parse and figure things about the SMBIOS table. I have some
simple patches to smbios(4) to expose this address as sysctl and
for ipmi(4) to get the base address. However, the real fix is to
have ipmi(4) ask smbios(4) for what it wants and have smbios(4)
parse it out and return it. This would make smbios(4) useful and reduce
duplicated code. If this address doesn't point to the anchor then
finding SMBIOS info. will fail as if this didn't exist. So there should
be no harm.
With this change and the following hack, dmidecode works on a bunch of
UEFI machines that I tested:
if kenv hint.smbios.0.mem > /dev/null
then
mkdir -p /sys/firmware/efi
mount -t tmpfs -o size=8k tmpfs /sys/firmware/efi
echo "SMBIOS=`kenv hint.smbios.0.mem`" > /sys/firmware/efi/systab
fi
Linux exposes this information via the /sys/firmware/efi/systab file which
dmidecode looks at. We should update dmidecode to do this the FreeBSD
way when we determine what that is!
Reviewed by: jhb
functions to call at the appropriate time to register new forth
words. In the past we've done this with ifdef soup, but now if the
file is included in the build, we'll get the new forth words.
Use this new functionality to move the pci bios stuff out of loader.c
by moving it to biospci.c.
Move the pnp functionality to common/pnp.c.
Move the inb/outb forth words to the i386 sysdep.c file where their
implementation is defined.
Adjust the efi linker scripts and build machinery to cope.
his should be an invisible change to forth scripts and user
experience.
Differential Revision: https://reviews.freebsd.org/D8145
When tsoome@ added skein support to the ZFS boot code and zfsloader, it
resulted in an explosion in code size, running close to a number of
limits.
The default for the C version of skein is to unroll all loops for
skein-256 and 512
Disabling the loop unrolling saves 20-28kb from each binary
boot1.efi
gptzfsboot
loader.efi
userboot.so
zfsloader
Reviewed by: emaste, tsoome
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D7826
1. Size returned for variable name is in bytes, not CHAR16 (the
UEFI standard is unclear on this, where it is clear on the size of
the variable).
2. Dynamically allocate the buffers so we can grow them if someone
defines a super-long variable name.
These two fixes allow me to examine all the variables in my BIOS and
also removes the repeated printing of variables.
There is no way to see anything about the faults occuring in
loader.efi. Some intel BIOSes do output a line into serial port at
115200/8/1 regardless of the current port settings with the EFI error
number, but this is too little, and not always available, esp. if the
user does not know where to look.
The patch adds a simple facility to grab exceptions and at least dump
generic registers and some exception details. Due to the relative
complexity of correctly taking over the BIOS IDT setup, only install
the facility on user request.
Two new commands, 'grab_faults' and 'ungrab_faults' are provided,
first one takes over, second undoes the first. It is supposed that
user would execute 'grab' by the developer direction of collecting the
debugging data. The 'fault' command generates exception to test the
setup.
Fault handlers use dedicated stack to improve chances of catching
stack/TSS exceptions. Due to this, BIOS IDT is duplicated into a
private copy, and debugger needs to find a free GDT slot for TSS. This
is done in somewhat complicated efi_redirect_exceptions().
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7935
trampoline page table. Also do some style cleanup.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D7934
The fill pattern was previously an ia64 instruction sequence. Presumably
ia64's linker script was copied as a starting point.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This is required on my system, which loads nvidia, vmm, and zfs, and 48M is
no longer enough for that. nvidia-driver's recent update increased its size
by several megabytes.
Reviewed by: jhb
MFC after: 1 week
Add a new 'netproto' variable which can be set for now to
NET_TFTP or NET_NFS (default to NET_NONE)
From the dhcp options if one sets the root-path option to:
"ip:path", the loader will consider it is booting over NFS
(meaning same behaviour as the default current behaviour)
if the dhcp option "tftp server address" is set (option 150)
the loader will consider it is booting over tftpfs, it will then
consider the root-path options with 2 possible case
1. "path" then the IP of the tftp server will be the one passed by
the option 150, and the files will be retrieved under "path" on the tftp
server
2. "ip:path" then the IP of the tftp server will be the one passed in
the option "overwritting the IP from the option 150.
We could not "abuse" the rootpath option in the form or tftp://ip:path because
this is already used for other purpose by iPXE preventing any chainload from
iPXE to the FreeBSD loader.
Given at each open(), the loader loops over all available filesystems and keep
the "best" error, we needed to prevent tftpfs to fallback on nfs and vice versa.
the tftpfs and nfs implementation in libstand now return EINVAL early if
'netproto' for that purpose.
Reviewed by: tsoome
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D7628
set later in the function. This fixes a potential NULL pointer dereference
found on arm64.
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Allow netbooting on efi without having to setup any NFS server by rebuilding the
loader with LOADER_TFTP_SUPPORT like for the i386 pxeloader
Sponsored by: Gandi.net
strings provided by user/config files. This update is replacing sprintf with
snprintf for cases the command_errbuf is built from dynamic content.
PR: 211958
Reported by: ecturt@gmail.com
Reviewed by: imp, allanjude
Approved by: imp (mentor), allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D7563
