Matching table format is compatible with ACPI_ID_PROBE bus method.
Note that while ACPI_ID_PROBE matches against _HID and all _CIDs, current
acpi_pnpinfo_str() exports only _HID and first _CID. That means second
and further _CIDs should be added to both acpi_pnpinfo_str() and
ACPICOMPAT_PNP_INFO if device matching against them is required.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26824
When iicbus is attached as child of Designware I2C controller it scans all
ACPI nodes for "I2C Serial Bus Connection Resource Descriptor" described
in section 19.6.57 of ACPI specs.
If such a descriptor is found, I2C child is added to iicbus, it's I2C
address, IRQ resource and ACPI handle are added to ivars. Existing
ACPI bus-hosted child is deleted afterwards.
The driver also installs so called "I2C address space handler" which is
disabled by default as nontested.
Set hw.iicbus.enable_acpi_space_handler loader tunable to 1 to enable it.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22901
r348164 added code to iicbus_request_bus/iicbus_release_bus to automatically
call device_busy()/device_unbusy() as part of aquiring exclusive use of the
bus (so modules can't be unloaded while the bus is exclusively owned and/or
IO is in progress). That broke the ability to do i2c IO from a slave device
probe method, because the slave isn't attached yet, so calling device_busy()
triggers a sanity-check panic for trying to busy a non-attached device.
Now we check whether the device status is < DS_ATTACHING, and if so we busy
the iicbus rather than the slave device. I think this leaves a small window
where a module could be unloaded while probing is in progress. But I think
that's true of all devices, and probably should be fixed by introducing a
DS_PROBING state for devices, and handling that at various points in the
newbus code.
Since drm2 removal, there has not been any consumer of the feature in the
tree. I am also unaware of any out-of-tree consumer.
More importantly, the feature has been broken from the very start, both
before and after r306589, because the ivar was set on a device that does
not support it and it was read from another device that also does not
support it.
A bus-wide no-stop flag cannot be implemented as an ivar as iicbus
attaches as a child of various drivers. Implementing the ivar in each
and every I2C driver is just impractical.
If we ever want to implement this feature properly, then probably the
easiest way to do it would be via a flag in the softc of iicbus.
In fact, we might have to do that in the stable branches if we want to
fix the code for them.
Reported by: ian (long time ago)
MFC after: 1 month (maybe)
X-MFC-note: cannot just merge the change, must keep drm2 happy
Pnpinfo is bus-specific and requires the bus name. The FDTCOMPAT_PNP_INFO()
macro makes it easier to define new FDT-based pnpinfo for busses other than
simplebus.
Differential Revision: https://reviews.freebsd.org/D20382
rather than relying on a set of canned EARLY_DRIVER_MODULE() statements in
the ofw_iicbus source. This means hw drivers will no longer be required to
use one of a few predefined driver names. They will also now be able to
decide themselves if they want to use DRIVER_MODULE or EARLY_DRIVER_MODULE
and to set which pass to attach on for early modules.
Mainly, this adds extern declarations for the driver and devclass variables.
It also renames ofwiicbus_devclass to ofw_iicbus_devclass to be consistant
with the way we use ofw_ prefixes on this stuff.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Usually it is sufficient to use iicbus_transfer_excl(), or one of the
higher-level convenience functions that use it, to reserve the bus for the
duration of each register access. Occasionally it is important that a
series of accesses or read-modify-write operations must be done without any
other intervening access to the device, to prevent corrupting state.
Without support for nested request/release, slave device drivers would have
to stop using high-level convenience functions and resort to working with
arrays of iic_msg structs just for a few operations (often involving
one-time device setup or infrequent configuration changes).
The changes here appear large from a glance at the diff, but in fact they're
nearly trivial, and the large diff is because of changes in indentation and
the re-wrapping of comments caused by that. One notable change is that
iicbus_release_bus() now ignores the IICBUS_CALLBACK(IIC_RELEASE_BUS) return
value. The old error handling left the bus in a kind of limbo state where
it was still owned at the iicbus layer, but drivers rarely check the return
of the release call, and it's unclear what they would do to recover from an
error return anyway. No existing low-level drivers return any kind of error
from IIC_RELEASE_BUS except one EINVAL for "you don't own the bus", to which
the right response is probably to carry on with the process of releasing the
reference to the bus anyway.
The current support for controlling i2c bus speed is an inconsistant mess.
There are 4 symbolic speed values defined, UNKNOWN, SLOW, FAST, FASTEST.
It seems to be universally assumed that SLOW means the standard 100KHz
rate from the original spec. Nothing ever calls iicbus_reset() with a
speed of FAST, although some drivers would treat it as the 400KHz standard
speed. Mostly iicbus_reset() is called with the speed set to UNKNOWN or
FASTEST, and there's really no telling what any individual driver will do
with those.
The speed of an i2c bus is limited by the speed of the slowest device on
the bus. This means that generally the bus speed needs to be configured
based on the board/system and the components within it. Historically for
i2c we've configured with device hints. Newer systems use FDT data and it
documents a clock-frequency property for i2c busses. Hobbyists and
developers are likely to want on the fly changes. These changes provide
all 3 methods, but do not require any existing drivers to change to use
the new facilities.
This adds an iicbus method, iicbus_get_frequency(dev, speed) that gets the
frequency for the requested symbolic speed. If the symbolic speed is SLOW
or if there is no speed configured for the bus, the returned value is
100KHz, always. Otherwise, if bus speed is configured by hints, fdt,
tunable, or sysctl, that speed is returned. It also adds a helper
function, iicbus_init_frequency() that any bus driver subclassed from
iicbus can initialize the frequency from some other source of info.
Initial driver implementations are provided for Freescale and TI.
Differential Revision: https://reviews.freebsd.org/D1174
PR: 195009
transfers to be default. It simplifies porting code which assumes
such settings.
Discussed with: avg, llos, nwhitehorn
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
These realtek switch PHYs speak a variant of i2c with some slightly
modified handling.
From the submitter, slightly modified now that some further digging
has been done:
The I2C framework makes a assumption that the read/not-write bit of the first
byte (the address) indicates whether reads or writes are to follow.
The RTL8366 family uses the bus: after sending the address+read/not-write byte,
two register address bytes are sent, then the 16-bit register value is sent
or received. While the register write access can be performed as a 4-byte
write, the read access requires the read bit to be set, but the first two bytes
for the register address then need to be transmitted.
This patch maintains the i2c protocol behaviour but allows it to be relaxed
(for these kinds of switch PHYs, and whatever else Realtek may do with this
almost-but-not-quite i2c bus) - by setting the "strict" hint to 0.
The "strict" hint defaults to 1.
Submitted by: Stefan Bethke <stb@lassitu.de>
- Add an sx lock to the iic(4) driver to serialize open(), close(), read(),
and write and to protect sc_addr and sc_count in the softc.
- Use cdev->si_drv1 instead of using the minor number of the cdev to
lookup the softc via newbus in iic(4).
- Store the device_t in the softc to avoid a similar detour via minor
numbers in iic(4).
- Only add at most one instance of iic(4) and iicsmb(4) to each iicbus(4)
instance, and do it in the child driver.
- Add a mutex to the iicbus(4) softc to synchronize the request/release bus
stuff.
- Use __BUS_ACCESSOR() for IICBUS_ACCESSOR() instead of rolling our own.
- Add a mutex to the iicsmb(4) softc to protect softc state updated in the
interrupt handler.
- Remove Giant from all the smbus methods in iicsmb(4) now that all the
iicbus(4) backend is locked.
forcing all transfers to do the start read/write stop by hand. Some
smart bridges prefer this sort of operation, and this allows us to
support their features more easily. When bridges don't support it, we
fall back to using the old-style opertaions. Expand the ioctl
interface to expose this function. Unlike the old-style interface,
this interface is thread safe, even on old bridges.
devices dynamically. That means,
+ only one /dev/iic or /dev/smb device for each smb/iic bus to access
+ I2C/SMB device address must be given to any ioctl
+ new devices may be plugged and accessed after boot, which was
impossible previously (device addresses were hardcoded into
the kernel)
