Commit Graph

156 Commits

Author SHA1 Message Date
Matt Jacob
3b87a552e4 Make the exploring of all luns supported by an HBA more of a
tunable (until we get REPORT LUNS in place).

If we're probing luns, and each probe succeeds, we keep going past
lun 7 if we're a SCSI3 or better device (until we fail to probe).

If we're probing luns, and a probe fails, we only keep going if
we're quirked *for* it (CAM_QUIRK_HILUNS), and if we're not quirked
*against* it (CAM_QUIRK_NOHILUNS), or we're a SCSI3 or better device
and the tunable (kern.cam.cam_srch_hi) is set non-zero.

Reviewed by:	nate@rootlabs.org, gibbs@scsiguy.com, ken@kdm.com, scottl@samsco.org
MFC after:	1 week
2005-09-16 01:26:17 +00:00
Tai-hwa Liang
362abc449c - Providing fine-grained malloc statistic by replacing M_DEVBUF with
module-specific malloc types.  These should help us to pinpoint the
  possible memory leakage in the future.
- Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based
  CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb.  Hopefully
  this would be helpful if someday we move the CCB allocator to use UMA
  instead of malloc().

Encouraged by:	jeffr, rwatson
Reviewed by:	gibbs, scottl
Approved by:	re (scottl)
2005-07-01 15:21:30 +00:00
Tai-hwa Liang
7c20d5d795 Fixing a memory leak in xpt_release_device(), which can be quickly
(depends on how many memory you have) observed through "tar -tvf /dev/sa0."

   Without this patch, RELENG_5 and HEAD panics with something like:

     kmem_malloc(4096): kmem_map too small: 42258432 total allocated

   RELENG_4 doesn't panic but spews following errors:

     camq_init: - cannot malloc array!

Reviewed by:	gibbs, scottl
Approved by:	re (scottl)
MFC after:	3 days
2005-06-24 08:09:05 +00:00
Alexander Kabaev
693937214b Do not initialize path variable with useless value just before
xpt_create_path overwrites it anyway.

Noticed by:     Coverity Prevent analysis tool
2005-05-11 17:39:33 +00:00
Sam Leffler
ec04feb21b avoid use after free
Submitted by:	gibbs
Reviewed by:	mdodd
Noticed by:	Coverity Prevent analysis tool
2005-03-31 21:42:49 +00:00
Justin T. Gibbs
df8f908079 Restore queue depth settings across tag disable events. The system often
disables tag queuing temporarily in order to allow controllers a window
to safely perform transfer negotiation with non-compliant devices.  Before
this change, CAM would restore the queue depth to the controller specified
maximum or device quirk level rather than any depth determined by reactions
to QUEUE FULL/BUSY events or an explicit user setting.

During device probe, initialize the flags field for XPT_SCAN_BUS.
The uninitialized value often confused CAM into not bothering to
issue an AC_FOUND_DEVICE async event for new devices.  The reason
this bug wasn't reported earlier is that CAM manually announces
devices after the initial system bus scans.

MFC: 3 days
2005-03-23 16:43:29 +00:00
Scott Long
01910bab7d Check the correct periph pointer after search for it.
Submitted by: Coverity Prevent analysis tool
2005-02-20 23:51:20 +00:00
Scott Long
ef3cf714a4 Provide locking for the ccb_bioq. This allows xpt_done() to be called without
Giant held.  In camisr(), move the ccb_bioq elements to a temporary local list
and then process the elements off of that list.  This enables the list to be
processed by only taking the ccb_bioq_lock once and only for a very short
time.

ccb_bioq_lock is a leaf mutex, so it's fine to call xpt_done() with other
locks held.  This is just a very minor step in the work to lock CAM, but
it allows us to avoid some messy locking/unlock dances in certain drivers.
2005-02-09 11:44:15 +00:00
Michael Reifenberger
8924340f2f Add quirk for easyRAID ER5 alias areca ARC-6010.
It reports itself as SCSI-3 but doesnt like getting probed on  high luns
because it hangs hard after finding itself again on lun 32...

Suggested by: Kenneth Merry
2005-01-25 08:59:06 +00:00
Matt Jacob
f4322bc884 This is a somewhat imperfect means to try and bring FreeBSD forward in
its ability to automatically scan and attach luns for modern storage
which has luns in the 0..1000 range, not 0..7.

The correct thing would be to do REPORT LUNS for devices whose LUN0
version shows a version >= SCSI3, but lacking that we should be able
to search higher than LUN 7 if we're >= SCSI3 with no ill effects.

This change keeps all of the QUIRK_HILUNS quirks, obeys the QUIRK_NOLUNS,
and introduces a QUIRK_NOHILUNS which will keep searches above LUN 7
happening for devices that report >= SCSI3 compliance. I doubt the latter
will be needed, but you never know.

This allowed me to randomly scan and attach  > 500 disks at a time in
a situation where quirking for QUIRK_HILUNS wasn't practical (the
vendor id and product id changes of the virtualization changes
constantly).

Reviewed by:	ken@freebsd.org, scottl@freebsd.org, gibbs@freebsd.org
MFC after:	2 weeks
2005-01-22 22:46:45 +00:00
Warner Losh
898b0535b7 Start each of the license/copyright comments with /*- 2005-01-05 22:34:37 +00:00
Justin T. Gibbs
9a4f1a4dd4 Correct another location where inquiry length as calculated from the
inquiry additional length field is off by one.

MFC: 3 days
2004-11-18 07:24:29 +00:00
Justin T. Gibbs
709a936f1f Correct an off-by-one in the calculation of the inquiry buffer length
to request from devices during the "long inquiry" portion of our probe.
This same bug was fixed in the 4.x stream a few years ago, but the fix
was never propogated to -current.

This fix is slightly different than in -stable:

 o Use offsetof() instead of a hard coded constant so as the make
   the code more self-explainatory.

 o Round odd long inquiry lengths up so as to avoid tickling ignore
   wide residue bugs in broken parallel SCSI devices running with a
   wide transfer negotiation.

MFC: 3 days
2004-11-18 04:14:32 +00:00
Scott Long
2e8f0ae68c Remove the camnet swi and CAM_PERIPH_NET. It has never been used, and given
that netowrk-over-scsi never really took off, there is little chance that
it will ever be needed.
2004-10-05 04:22:20 +00:00
Poul-Henning Kamp
3e019deaed Do a pass over all modules in the kernel and make them return EOPNOTSUPP
for unknown events.

A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
2004-07-15 08:26:07 +00:00
Paul Saab
2fc0389afc Revert rev 1.140, it was a bit pre-mature. 2004-06-21 19:01:55 +00:00
Paul Saab
11593f4318 Add a quirk for ciss to stop trying to read the serial number off
of logical volumes.
2004-06-21 18:34:30 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Colin Percival
59e758846f Compare the *number* of patterns to zero, not the *pointer* to the
patterns.  (These lines are correct the other two times they appear.)

Reported by:	"Ted Unangst" <tedu@coverity.com>
Approved by:	rwatson (mentor), ken (scsi)
2004-02-28 12:59:56 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
c9c7976f7f Device megapatch 1/6:
Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
2004-02-21 19:42:58 +00:00
Scott Long
68153f43b6 Sprinkle GIANT_REQUIRED asserts around the xpt layer to aid with locking the
SCSI drivers.
2003-11-09 02:22:33 +00:00
David E. O'Brien
9c963d873e Use __FBSDID(). 2003-06-10 17:50:20 +00:00
Poul-Henning Kamp
07c6eac9d7 Add /* FALLTHROUGH */
Move /* FALLTHROUGH */ to correct location.
Remove unused variable(s).

Found by:       FlexeLint
2003-05-31 20:46:21 +00:00
Poul-Henning Kamp
60794e0478 Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Matt Jacob
78900a835d Note that the large Hitachi's are also CAM_QUIRK_HILUNS 2002-09-23 04:55:32 +00:00
Brooks Davis
3a93719872 Make SCSI_DELAY setable at boot time and runtime via the
kern.cam.scsi_delay tunable/sysctl.

Reviewed by:	mdodd, njl
2002-09-02 20:10:19 +00:00
Nate Lawson
57b89bbc65 Add \n to various printfs. grep shows these should be the last ones. 2002-08-27 18:43:14 +00:00
Philippe Charnier
93b0017f88 Replace various spelling with FALLTHROUGH which is lint()able 2002-08-25 13:23:09 +00:00
Matt Jacob
c7948a94c5 Make Veritas Storage Appliance a HILUNS device.
MFC after:	1 day
2002-04-24 00:00:55 +00:00
Hidetoshi Shimokawa
7afa4afb9c Maxtor Personal Storage 3000XT (Firewire) hangs upon
serial number probing.

MFC after:	1 week
2002-03-24 00:17:39 +00:00
Mike Smith
65c382562e Define the kern.cam sysctl in the cam layer, rather than multiply in several
peripheral drivers.  Remove Ken's comment to the effect that this needed
to be done.

Staticise camnet_ih and cambio_ih.
2002-01-09 03:39:04 +00:00
John Baldwin
c86b6ff551 Change the preemption code for software interrupt thread schedules and
mutex releases to not require flags for the cases when preemption is
not allowed:

The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent
switching to a higher priority thread on mutex releease and swi schedule,
respectively when that switch is not safe.  Now that the critical section
API maintains a per-thread nesting count, the kernel can easily check
whether or not it should switch without relying on flags from the
programmer.  This fixes a few bugs in that all current callers of
swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from
fast interrupt handlers and the swi_sched of softclock needed this flag.
Note that to ensure that swi_sched()'s in clock and fast interrupt
handlers do not switch, these handlers have to be explicitly wrapped
in critical_enter/exit pairs.  Presently, just wrapping the handlers is
sufficient, but in the future with the fully preemptive kernel, the
interrupt must be EOI'd before critical_exit() is called.  (critical_exit()
can switch due to a deferred preemption in a fully preemptive kernel.)

I've tested the changes to the interrupt code on i386 and alpha.  I have
not tested ia64, but the interrupt code is almost identical to the alpha
code, so I expect it will work fine.  PowerPC and ARM do not yet have
interrupt code in the tree so they shouldn't be broken.  Sparc64 is
broken, but that's been ok'd by jake and tmm who will be fixing the
interrupt code for sparc64 shortly.

Reviewed by:	peter
Tested on:	i386, alpha
2002-01-05 08:47:13 +00:00
Kenneth D. Merry
5cd818b1b7 Bring the probe inquiry code in line with the SCSI spec.
It is legal to have a device with device type 0x1f, that just means
that the device is of unknown type.  Instead, only check the peripheral
qualifier when deciding whether or not to reject a device based on its
inquiry information.

Tested by:	julian
MFC after:	3 weeks
2001-11-27 03:34:22 +00:00
David Greenman
136b546adf Disabled tagged commands for Hitachi Jura-C series with J8A8 firmware.
PR:		23536
Submitted by:	amagai@nue.org
2001-11-19 23:23:28 +00:00
Ian Dowse
c0bea86dc4 Back out revision 1.117; the correct solution is to upgrade the
firmware on the drive in question. The pattern also matched far
too many Hitachi drives.

Spotted by:	dg
2001-11-19 20:50:44 +00:00
Ian Dowse
39456c0351 Hitachi DK32 disks have problems with tagged queuing under load.
PR:		kern/23536
Submitted by:	Y.Amagai <amagai@nue.org>
MFC after:	1 week
2001-11-19 01:19:08 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Matt Jacob
f053d7777b cleanup some of the XPORT_FC code 2001-06-24 18:19:24 +00:00
Peter Wemm
2398f0cd1d Hints overhaul:
- Replace some very poorly thought out API hacks that should have been
  fixed a long while ago.
- Provide some much more flexible search functions (resource_find_*())
- Use strings for storage instead of an outgrowth of the rather
  inconvenient temporary ioconf table from config().  We already had a
  fallback to using strings before malloc/vm was running anyway.
2001-06-12 09:40:04 +00:00
Matt Jacob
2c7d0b8dbc first blush at some FC path inquiry settings 2001-06-04 18:23:49 +00:00
Matt Jacob
f253884421 Do NOLUNS dance for oddball Exabyte. We *really* need to do this as hints.
Correct match for A5000 SES instance.

PR:		19887
MFC after:	2 weeks
2001-06-04 18:20:52 +00:00
John Baldwin
8bd57f8fc2 Remove unneeded includes of sys/ipl.h and machine/ipl.h. 2001-05-15 23:22:29 +00:00
Kenneth D. Merry
3393f8daa3 Rewrite of the CAM error recovery code.
Some of the major changes include:

	- The SCSI error handling portion of cam_periph_error() has
	  been broken out into a number of subfunctions to better
	  modularize the code that handles the hierarchy of SCSI errors.
	  As a result, the code is now much easier to read.

	- String handling and error printing has been significantly
	  revamped.  We now use sbufs to do string formatting instead
	  of using printfs (for the kernel) and snprintf/strncat (for
	  userland) as before.

	  There is a new catchall error printing routine,
	  cam_error_print() and its string-based counterpart,
	  cam_error_string() that allow the kernel and userland
	  applications to pass in a CCB and have errors printed out
	  properly, whether or not they're SCSI errors.  Among other
	  things, this helped eliminate a fair amount of duplicate code
	  in camcontrol.

	  We now print out more information than before, including
	  the CAM status and SCSI status and the error recovery action
	  taken to remedy the problem.

	- sbufs are now available in userland, via libsbuf.  This
	  change was necessary since most of the error printing code
	  is shared between libcam and the kernel.

	- A new transfer settings interface is included in this checkin.
	  This code is #ifdef'ed out, and is primarily intended to aid
	  discussion with HBA driver authors on the final form the
	  interface should take.  There is example code in the ahc(4)
	  driver that implements the HBA driver side of the new
	  interface.  The new transfer settings code won't be enabled
	  until we're ready to switch all HBA drivers over to the new
	  interface.

src/Makefile.inc1,
lib/Makefile:		Add libsbuf.  It must be built before libcam,
			since libcam uses sbuf routines.

libcam/Makefile:	libcam now depends on libsbuf.

libsbuf/Makefile:	Add a makefile for libsbuf.  This pulls in the
			sbuf sources from sys/kern.

bsd.libnames.mk:	Add LIBSBUF.

camcontrol/Makefile:	Add -lsbuf.  Since camcontrol is statically
			linked, we can't depend on the dynamic linker
			to pull in libsbuf.

camcontrol.c:		Use cam_error_print() instead of checking for
			CAM_SCSI_STATUS_ERROR on every failed CCB.

sbuf.9:			Change the prototypes for sbuf_cat() and
			sbuf_cpy() so that the source string is now a
			const char *.  This is more in line wth the
			standard system string functions, and helps
			eliminate warnings when dealing with a const
			source buffer.

			Fix a typo.

cam.c:			Add description strings for the various CAM
			error status values, as well as routines to
			look up those strings.

			Add new cam_error_string() and
			cam_error_print() routines for userland and
			the kernel.

cam.h:			Add a new CAM flag, CAM_RETRY_SELTO.

			Add enumerated types for the various options
			available with cam_error_print() and
			cam_error_string().

cam_ccb.h:		Add new transfer negotiation structures/types.

			Change inq_len in the ccb_getdev structure to
			be "reserved".  This field has never been
			filled in, and will be removed when we next
			bump the CAM version.

cam_debug.h:		Fix typo.

cam_periph.c:		Modularize cam_periph_error().  The SCSI error
			handling part of cam_periph_error() is now
			in camperiphscsistatuserror() and
			camperiphscsisenseerror().

			In cam_periph_lock(), increase the reference
			count on the periph while we wait for our lock
			attempt to succeed so that the periph won't go
			away while we're sleeping.

cam_xpt.c:		Add new transfer negotiation code.  (ifdefed
			out)

			Add a new function, xpt_path_string().  This
			is a string/sbuf analog to xpt_print_path().

scsi_all.c:		Revamp string handing and error printing code.
			We now use sbufs for much of the string
			formatting code.  More of that code is shared
			between userland the kernel.

scsi_all.h:		Get rid of SS_TURSTART, it wasn't terribly
			useful in the first place.

			Add a new error action, SS_REQSENSE.  (Send a
			request sense and then retry the command.)
			This is useful when the controller hasn't
			performed autosense for some reason.

			Change the default actions around a bit.

scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.  Selection
			timeouts shouldn't be covered by a sense flag.

scsi_pass.[ch]:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.

			Get rid of the last vestiges of a read/write
			interface.

libkern/bsearch.c,
sys/libkern.h,
conf/files:		Add bsearch.c, which is needed for some of the
			new table lookup routines.

aic7xxx_freebsd.c:	Define AHC_NEW_TRAN_SETTINGS if
			CAM_NEW_TRAN_CODE is defined.

sbuf.h,
subr_sbuf.c:		Add the appropriate #ifdefs so sbufs can
			compile and run in userland.

			Change sbuf_printf() to use vsnprintf()
			instead of kvprintf(), which is only available
			in the kernel.

			Change the source string for sbuf_cpy() and
			sbuf_cat() to be a const char *.

			Add __BEGIN_DECLS and __END_DECLS around
			function prototypes since they're now exported
			to userland.

kdump/mkioctls:		Include stdio.h before cam.h since cam.h now
			includes a function with a FILE * argument.

Submitted by:	gibbs (mostly)
Reviewed by:	jdp, marcel (libsbuf makefile changes)
Reviewed by:	des (sbuf changes)
Reviewed by:	ken
2001-03-27 05:45:52 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Kenneth D. Merry
f8d98b3493 In xpt_set_transfer_settings(), force async if either the period or the
offset is set to 0.

Re-arrange the DT limiting code so that we don't end up setting the period
to 0xa if the user really wants async.  The previous behavior seemed to
confuse the aic(4) driver.

PR:		kern/22733
Reviewed by:	gibbs
2001-03-13 22:35:28 +00:00
John Baldwin
062d8ff5a0 - Catch up to the new swi API changes:
- Use swi_* function names.
  - Use void * to hold cookies to handlers instead of struct intrhand *.
- In sio.c, use 'driver_name' instead of "sio" as the name of the driver
  lock to minimize diffs with cy(4).
2001-02-09 17:46:35 +00:00