Commit Graph

244 Commits

Author SHA1 Message Date
Gleb Smirnoff
ddadcf17a0 - Provide wi_get_counter() to return counters that are not collected,
but taken from hardware.
- Mechanically convert to if_inc_counter() the rest of counters.
2014-09-24 12:19:00 +00:00
Kevin Lo
5945b5f5ab Rename definition of IEEE80211_FC1_WEP to IEEE80211_FC1_PROTECTED.
The origin of WEP comes from IEEE Std 802.11-1997 where it defines
whether the frame body of MAC frame has been encrypted using WEP
algorithm or not.
IEEE Std. 802.11-2007 changes WEP to Protected Frame, indicates
whether the frame is protected by a cryptographic encapsulation
algorithm.

Reviewed by:	adrian, rpaulo
2014-01-08 08:06:56 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Justin Hibbits
3e506f5f8c Use the streaming functions for reading/writing the BAP fields on wi(4). This
fixes wi(4) device access on big endian architectures.

PR:		kern/164499
Reviewed by:	adrian
Obtained from:	NetBSD
2013-07-29 05:39:20 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Adrian Chadd
0caafbf948 If an interrupt is received with no vap attached, just fail LINK events.
This fixes a NULL pointer dereference which occurs if the vap list is
empty but someone brings up the wi0 interface.
2012-02-25 08:01:29 +00:00
Adrian Chadd
a805122c1c Include opt_wlan.h before net80211 includes; so IEEE80211_* configuration
flags are correctly handled.

This is required for this to load when IEEE80211_DEBUG_REFCNT is
defined.
2012-01-26 05:11:37 +00:00
Bernhard Schmidt
fcd9500f91 Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
  compiler warnings

Submitted by:	arundel@
2011-12-17 10:23:17 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Matthew D Fleming
f8e4b4ef49 sysctl(8) should use the CTLTYPE to determine the type of data when
reading.  (This was already done for writing to a sysctl).  This
requires all SYSCTL setups to specify a type.  Most of them are now
checked at compile-time.

Remove SYSCTL_*X* sysctl additions as the print being in hex should be
controlled by the -x flag to sysctl(8).

Succested by:	bde
2011-01-19 17:04:07 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
Poul-Henning Kamp
6778431478 Revert previous commit and add myself to the list of people who should
know better than to commit with a cat in the area.
2009-09-08 13:19:05 +00:00
Poul-Henning Kamp
b34421bf9c Add necessary include. 2009-09-08 13:16:55 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Andriy Gapon
c0e55e3b65 strict kobj sigs: fix assortment of device_detach and device_shutdown impls
with common issue of having void return type instead of int

Reviewed by:	imp, current@
Approved by:	jhb (mentor)
2009-06-11 17:14:28 +00:00
Sam Leffler
c3e8a58723 force type match 2009-05-21 04:00:31 +00:00
Warner Losh
68fc5ce70b Revert last junk... 2009-05-20 22:28:55 +00:00
Sam Leffler
5463c4a485 Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
  and remove explicit bpf support from wireless drivers; drivers now
  use ieee80211_radiotap_attach to setup shared data structures that
  hold the radiotap header for each packet tx/rx
o remove rx timestamp from the rx path; it was used only by the tdma support
  for debugging and was mostly useless due to it being 32-bits and mostly
  unavailable
o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and
  per-com state when there are active taps
o track the number of monitor mode vaps
o use bpf tap and monitor mode vap state to decide when to collect radiotap
  state and dispatch frames; drivers no longer explicitly directly check
  bpf state or use bpf calls to tap frames
o handle radiotap state updates on channel change in net80211; drivers
  should not do this (unless they bypass net80211 which is almost always
  a mistake)
o update various drivers to be more consistent/correct in handling radiotap
o update ral to include TSF in radiotap'd frames
o add promisc mode callback to wi

Reviewed by:	cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
Warner Losh
00b4e54ae7 We no longer need to use d_thread_t, migrate to struct thread *. 2009-05-20 17:29:21 +00:00
Andrew Thompson
5efea30f03 Create a taskqueue for each wireless interface which provides a serialised
sleepable context for net80211 driver callbacks. This removes the need for USB
and firmware based drivers to roll their own code to defer the chip programming
for state changes, scan requests, channel changes and mcast/promisc updates.
When a driver callback completes the hardware state is now guaranteed to have
been updated and is in sync with net80211 layer.

This nukes around 1300 lines of code from the wireless device drivers making
them more readable and less race prone.

The net80211 layer has been updated as follows
 - all state/channel changes are serialised on the taskqueue.
 - ieee80211_new_state() always queues and can now be called from any context
 - scanning runs from a single taskq function and executes to completion. driver
   callbacks are synchronous so the channel, phy mode and rx filters are
   guaranteed to be set in hardware before probe request frames are
   transmitted.

Help and contributions from Sam Leffler.

Reviewed by:	sam
2009-05-02 15:14:18 +00:00
Sam Leffler
339ccfb391 Hoist 802.11 encapsulation up into net80211:
o call ieee80211_encap in ieee80211_start so frames passed down to drivers
  are already encapsulated
o remove ieee80211_encap calls in drivers
o fixup wi so it recreates the 802.3 head it requires from the 802.11
  header contents
o move fast-frame aggregation from ath to net80211 (conditional on
  IEEE80211_SUPPORT_SUPERG):
  - aggregation is now done in ieee80211_start; it is enabled when the
    packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames
    are held on a staging queue according to ieee80211_ffagemax
    (net.wlan.ffagemax) to wait for a frame to combine with
  - drivers must call back to age/flush the staging queue (ath does this
    on tx done, at swba, and on rx according to the state of the tx queues
    and/or the contents of the staging queue)
  - remove fast-frame-related data structures from ath
  - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle
    per-node fast-frames state (we reuse 11n tx ampdu state)
o change ieee80211_encap calling convention to include an explicit vap
  so frames coming through a WDS vap are recognized w/o setting M_WDS

With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames.

Reviewed by:	thompsa, rpaulo, avatar, imp, sephe
2009-03-30 21:53:27 +00:00
Sam Leffler
cf1c8d5f9c fake the association id so packets are not rejected in the tx path 2009-03-30 21:29:25 +00:00
Sam Leffler
29aca94080 Eliminate ic_myaddr so changing the mac address of a device works correctly:
o remove ic_myaddr from ieee80211com
o change ieee80211_ifattach to take the mac address of the physical device
  and use that to setup the lladdr.
o replace all references to ic_myaddr in drivers by IF_LLADDR
o related cleanups (e.g. kill dead code)

PR:		kern/133178
Reviewed by:	thompsa, rpaulo
2009-03-29 17:59:14 +00:00
Warner Losh
15820ef70c Report what kind of chip only under bootverbose since that's now
exported via a sysctl.
2008-08-02 20:49:01 +00:00
Warner Losh
0c5544bb64 Export the hardware type (as number and name), the secondary firmware
revision and (on Prism cards) the primary firmware revision via
sysctl.  Move the printing of this information under bootverbose,
since it is relatively easy to get to it now.
2008-07-28 17:00:37 +00:00
Warner Losh
febcff0a3b Register the interrupt handler at the end of wi_attach rather than at
the beginning.  There's a race in the shared interrutp case.  If
another interrupt happens after the interrupt is setup, then we'd try
to lock an uninitialized mutex.  In addition, if we bailed out due to
a too old version of firmware, we'd leave the interrupt enabled with
all the fun that ensues....
2008-07-26 17:04:30 +00:00
Sam Leffler
c43feede8b Minor cleanup of vap create work:
o add IEEE80211_C_STA capability to indicate sta mode is supported
  (was previously assumed) and mark drivers as capable
o add ieee80211_opcap array to map an opmode to the equivalent capability bit
o move IEEE80211_C_OPMODE definition to where capabilities are defined so it's
  clear it should be kept in sync (on future additions)
o check device capabilities in clone create before trying to create a vap;
  this makes driver checks unneeded
o make error codes return on failed clone request unique
o temporarily add console printfs on clone request failures to aid in
  debugging; these will move under DIAGNOSTIC or similar before release
2008-05-12 00:15:30 +00:00
Andrew Thompson
77197f9ce4 Only start the vaps if the init routine completed. 2008-05-10 20:25:59 +00:00
Andrew Thompson
31a8c1edd8 Unify all the wifi *_ioctl routines
- Limit grabbing the lock to SIOCSIFFLAGS.
 - Move ieee80211_start_all() to SIOCSIFFLAGS.
 - Remove SIOCSIFMEDIA as it is not useful.
 - Limit ether_ioctl to only SIOCGIFADDR. SIOCSIFADDR and SIOCSIFMTU have no
   affect as there is no input/output path in the vap parent.  The vap code
   will handle the reinit of the mac address changes.
 - Split off ndis_ioctl_80211 as it was getting too different to wired devices.

This fixes a copyout while locked and a lock recursion.

Reviewed by:		sam
2008-05-01 04:55:00 +00:00
Sam Leffler
b032f27c36 Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral).  Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by:	Hobnob and Marvell
Reviewed by:	many
Obtained from:	Atheros (some bits)
2008-04-20 20:35:46 +00:00
Andrew Thompson
18337730db Make wi_set_channel() actually change the channel in hardware so that hostap
mode works properly, previously the hostap channel could not be changed off #3.

Fix an ifp/sc misuse while I am here.

Reported by:	many
Approved by:	re (bmah)
2007-09-16 20:02:29 +00:00
Sam Leffler
14fb6b8fe2 o add 802.11 state machine states for DFS and client-side power save
o fixup drivers to ignore new states

Reviewed by:	avatar (?)
Approved by:	re (blanket wireless)
2007-09-05 21:31:32 +00:00
Tai-hwa Liang
c7f6197937 MFP4(123963): Fixing a possible NULL pointer dereference by making
the actual assignment after the NULL check.

Found by:	Coverity Prevent(tm)
CID:		2303 (run 4156)
Reviewed by:	sam
Approved by:	re (bmah)
2007-08-09 13:29:26 +00:00
Andrew Thompson
9baf942d49 Now that wicontrol has been removed from the base system the corresponding
ioctls can be removed. These have been #ifdef'd out and left as a reference in
case any of the RIDs need to be turned into sysctls at a later date.

Reviewed by:	sam, avatar
Approved by:	re (kensmith)
2007-07-11 21:25:48 +00:00
Andrew Thompson
d81b3a5588 Fix scanning issues since the new net80211 code went in
- provide dummy routines for ic_scan_curchan and ic_scan_mindwell, we do not support those operations.
- add ieee80211_scan_done() to tell the scanning module that all channels have been scanned.
- pass IEEE80211_S_SCAN state off to net80211 so it can initiate scanning
- fix overflow in the rates array
- scale the rate value passed back from the firmware scan to the units that net80211 uses.

Submitted by:	Token
Reviewed by:	sam, avatar
Approved by:	re (kensmith)
2007-06-30 21:39:21 +00:00
Andrew Thompson
b54b1bab4b Change the channel number in the scan results struct to be a pointer to the
operating channel and use this in the scan cache rather than directly using
ic_curchan. Some firmware cards can only do a full scan and so ic_curchan does
not have the correct value.

Also add IEEE80211_CHAN2IEEE to directly dereference ic_ieee from the channel
to be used in the fast path.

Reviewed by:	sam, sephe
Approved by:	re (kensmith)
2007-06-30 21:23:23 +00:00
Andrew Thompson
d35985e711 Fix the channel reporting when the card is associated. The channel array used
to be index by IEEE channel number but that is no longer the case and it needs
to be searched for.

Submitted by:	avatar
Reviewed by:	sam
Approved by:	re (kensmith)
2007-06-30 21:12:41 +00:00
Sam Leffler
68e8e04e93 Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
  fully enumerated and uniquely identify the operating characteristics;
  these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
  background scanning and roaming
o move scanning support into loadable modules based on the operating
  mode to enable different policies and reduce the memory footprint
  on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
  mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
  we use a simple algorithm to trigger a roam: we threshold the rssi
  and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
  drivers but is incomplete; it's included now to establish a baseline
  for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
  prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
  encapsulation (note this can be used with any card that can tx+rx
  large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
  authentication and association failures
o enable the addition of sta mode power save support for drivers that need
  net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
  results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
  index into the rate set; this needs to be extended to deal with
  multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing

Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
       dynamic turbo (lightly tested), 11n (sniffing only and needs
       new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
       rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested

This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others.  Much of the scanning work was supported by
Atheros.  The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
Sepherosa Ziehau
b03cfe2396 - Fix mbuf/node leakage in drivers' raw_xmit().
- For ural(4):
  o  Fix node leakage in ural_start(), if ural_tx_mgt() fails.
  o  Fix mbuf leakage in ural_tx_{mgt,data}(), if usbd_transfer() fails.
  o  In ural_tx_{mgt,data}(), set ural_tx_data.{m,ni} to NULL, if
     usbd_transfer() fails, so they will not be freed again in ural_stop().

Approved by:	sam (mentor)
2007-04-19 13:09:57 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Sam Leffler
a5d62f191b replace if_watchdog w/ a private callout
MFC after:	1 month
2006-12-11 00:41:22 +00:00
Sam Leffler
fe8184b687 drop softc lock when passing rx frames up the stack
MFC after:	1 month
2006-12-11 00:37:12 +00:00
Sam Leffler
f8f1546232 split wi_start int locked+unlocked variants and use the unlocked
one from the isr to eliminate a recursive lock

MFC after:	1 month
2006-12-11 00:35:51 +00:00
Sam Leffler
df64e1e4ef nuke compatibility cruft
MFC after:	1 month
2006-12-11 00:32:15 +00:00
Robert Watson
acd3428b7d Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges.  These may
require some future tweaking.

Sponsored by:           nCircle Network Security, Inc.
Obtained from:          TrustedBSD Project
Discussed on:           arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
                        Alex Lyashkov <umka at sevcity dot net>,
                        Skip Ford <skip dot ford at verizon dot net>,
                        Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
Sam Leffler
330608ccb6 raw 802.11 packet transmit support
Submitted by:	Andrea Bittau <a.bittau@cs.ucl.ac.uk>
2006-08-05 04:58:25 +00:00
Tai-hwa Liang
334ee2771b Really fix the typo this time: it should be sc->sc_drvbpf to be verified,
not ic->ic_drvbpf.
2006-06-05 23:06:03 +00:00
Tai-hwa Liang
edc428baef Fixing a typo in rev1.196. 2006-06-05 22:59:14 +00:00
Christian S.J. Peron
16d878cc99 Fix the following bpf(4) race condition which can result in a panic:
(1) bpf peer attaches to interface netif0
	(2) Packet is received by netif0
	(3) ifp->if_bpf pointer is checked and handed off to bpf
	(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
	    initialized to NULL.
	(5) ifp->if_bpf is dereferenced by bpf machinery
	(6) Kaboom

This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.

Summary of changes:

- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
  bpf interface structure. Once this is done, ifp->if_bpf should never be
  NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
  a lockless read bpf peer list associated with the interface. It should
  be noted that the bpf code will pickup the bpf_interface lock before adding
  or removing bpf peers. This should serialize the access to the bpf descriptor
  list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
  can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present

Now what happens is:

	(1) Packet is received by netif0
	(2) Check to see if bpf descriptor list is empty
	(3) Pickup the bpf interface lock
	(4) Hand packet off to process

From the attach/detach side:

	(1) Pickup the bpf interface lock
	(2) Add/remove from bpf descriptor list

Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).

[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
    not we have any bpf peers that might be interested in receiving packets.

In collaboration with:	sam@
MFC after:	1 month
2006-06-02 19:59:33 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00