Commit Graph

10 Commits

Author SHA1 Message Date
Ollivier Robert
4dc93581d1 Bring the ancontrol buffer oflows fixes here too.
Submitted by:	Aaron Campbell <aaron@openbsd.org>
2000-06-18 23:45:17 +00:00
Bill Paul
6f76cb1e28 Add support for WEP (encryption) for silver and gold WaveLAN/IEEE turbo cards.
Also update wicontrol to enable/disable encryption, set WEP keys and set the
TX key index. Silver cards only have 40-bit keys. This is something of a quick
hack, but it works well enough for me to commit this from the LinuxWorld
exhibit floor.

The WEP support only shows up if you have a card that supports it.

Would have been approved by: jkh, if he hadn't wandered off somewhere
Approved in his place by: msmith, who's standing right here
2000-02-02 17:59:13 +00:00
Bill Paul
dda0e6f54e Update the WaveLAN/IEEE driver:
- Convert to new bus attachment scheme. Thanks to Blaz Zupan for doing
  the initial work here. One thing I changed was to have the attach
  and detach routines work like the PCI drivers, which means that in
  theory you should be able to load and unload the driver like the PCI
  NIC drivers, however the pccard support for this hasn't settled down
  yet so it doesn't quite work. Once the pccard work is done, I'll have
  to revisit this.

- Add device wi0 to PCCARD. If we're lucky, people should be able to
  install via their WaveLAN cards now.

- Add support for signal strength caching. The wicontrol utility has
  also been updated to allow zeroing and displaying the signal strength
  cache.

- Add a /sys/modules/wi directory and fix a Makefile to builf if_wi.ko.
  Currently this module is only built for the i386 platform, though once
  the pccard stuff is done it should be able to work on the alpha too.
  (Theoretically you should be able to plug one of the WaveLAN/IEEE ISA
  cards into an alpha with an ISA slot, but we'll see how that turns out.

- Update LINT to use only device wi0. There is no true ISA version of
  the WaveLAN/IEEE so we'll never use an ISA attachment.

- Update files.i386 so that if_wi is dependent on card.
1999-11-25 20:45:49 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Bill Paul
33b3ee3898 - Fix up some comments in if_wi.c (no code changes)
- Mention that the 6Mbps turbo adapters are supported in HARDWARE.TXT
  and RELNOTES.TXT and the wi.4 man page
- Mention turbo adapters in the wicontrol.8 man page and provide a
  complete table of available transmit speed settings
1999-05-22 16:12:54 +00:00
Bill Paul
f9137cc3c5 Fix usage in wicontrol.c to agree with man page.
Update documentation for -f frequency selection option to include complete
list of channel numbers and frequencies.
1999-05-14 18:31:31 +00:00
Bill Paul
049e649a10 Add support to wicontrol(8) and wi(4) for enabling and configuring
power management. This will only work on newer firmware revisions; older
firmware will silently ignore the attempts to turn power management on.

Patches supplied by: Brad Karp <karp@eecs.harvard.edu>
1999-05-07 03:28:54 +00:00
Bill Paul
e566363ef1 Modify wicontrol(8) and wi(4) to allow setting the frequency of the
WaveLAN's radio modem. The default is whatever the NIC uses since NICs
sold in different countries may default to different frequencies. (The
Lose95/LoseNT software doesn't let you select the channel so it's probably
not really meant to be changed.)
1999-05-06 16:32:45 +00:00
Bill Paul
c49713fde1 Fix some byte ordering problems; I was storing string lengths wrong,
which was causing wicontrol to crash when reading string parameters
from the WaveLAN.

Patches submitted by: Brad Karp <karp@eecs.harvard.edu>
1999-05-06 03:34:02 +00:00
Bill Paul
31a08ab08e Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA
adapter (and some workalikes). Also add man pages and a wicontrol
utility to manipulate some of the card parameters.

This driver was written using information gleaned from the Lucent HCF Light
library, though it does not use any of the HCF Light code itself, mainly
because it's contaminated by the GPL (but also because it's pretty gross).
The HCF Light lacks certain featurs from the full (but proprietary) HCF
library, including 802.11 frame encapsulation support, however it has
just enough register information about the Hermes chip to allow someone
with enough spare time and energy to implement a proper driver. (I would
have prefered getting my hands on the Hermes manual, but that's proprietary
too. For those who are wondering, the Linux driver uses the proprietary
HCF library, but it's provided in object code form only.)

Note that I do not have access to a WavePOINT access point, so I have
only been able to test ad-hoc mode. The wicontrol utility can turn on
BSS mode, but I don't know for certain that the NIC will associate with
an access point correctly. Testers are encouraged to send their results
to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00