Commit Graph

43 Commits

Author SHA1 Message Date
MIHIRA Sanpei Yoshiro
82ad8eff9e Add support Nvidia nForce2(audio)
PR:		kern/71317
Submitted by:	Mezz <mezz@freebsd.org>
MFC after:	1 week
2004-09-20 07:19:49 +00:00
MIHIRA Sanpei Yoshiro
e99e85532a Add support nForce3 250 audio
PR:		kern/71726
Submitted by:	FUJIMOTO Kou <fujimoto@j.dendai.ac.jp>
MFC after:	1 week
2004-09-20 05:59:17 +00:00
Seigo Tanimura
0739ea1de2 Rename the sound device drivers:
- `sound'
  The generic sound driver, always required.

- `snd_*'
  Device-dependent drivers, named after the sound module names.
  Configure accordingly to your hardware.

In addition, rename the `snd_pcm' module to `sound' in order to sync
with the driver names.

Suggested by:	cg
2004-07-16 04:00:08 +00:00
Brian Feldman
8fb9a995cf The newpcm headers currently #define away INTR_MPSAFE and INTR_TYPE_AV
because they bogusly check for defined(INTR_MPSAFE) -- something which
never was a #define.  Correct the definitions.

This make INTR_TYPE_AV finally get used instead of the lower-priority
INTR_TYPE_TTY, so it's quite possible some improvement will be had
on sound driver performance.  It would also make all the drivers
marked INTR_MPSAFE actually run without Giant (which does seem to
work for me), but:
	INTR_MPSAFE HAS BEEN REMOVED FROM EVERY SOUND DRIVER!
It needs to be re-added on a case-by-case basis since there is no one
who will vouch for which sound drivers, if any, willy actually operate
correctly without Giant, since there hasn't been testing because of
this bug disabling INTR_MPSAFE.

Found by:	"Yuriy Tsibizov" <Yuriy.Tsibizov@gfk.ru>
2004-04-14 14:57:49 +00:00
Mathew Kanner
236efae6a9 By default, ich4 has NAMBAR and NABMBAR i/o spaces as
read-only.  Need to enable "legacy support", by poking
into pci config space.  (comment from the patch)

Submited by:	Autrijus Tang <autrijus@autrijus.org>
Approved by:	tanimura (mentor)
2004-03-31 00:11:24 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Mathew Kanner
0d8ed52ea5 Augment /dev/sndstat with the module names, if applicable.
Approved by:	  tanimura (mentor)
2004-03-06 15:52:42 +00:00
Nate Lawson
feec6a7a90 Correctly reset ich[3-5] sound cards on resume. This fixes audio playback
after suspend/resume for me.

PR:
Submitted by:	iwasaki
Reviewed by:	orion
Approved by:	cg
Obtained from:
MFC after:
2003-09-15 21:16:47 +00:00
David E. O'Brien
bbee264035 Recognize the sound chip on the Opteron-based nForce3 motherboards
(such as the Asus SK8N).
2003-09-03 07:38:21 +00:00
David E. O'Brien
d4aeb0ed01 Add sound support for the AMD64 8111 chip.
PR:		kern/55932
Submitted by:	Mark Kettenis <kettenis@chello.nl>
2003-08-28 19:21:21 +00:00
Warner Losh
90cf0136c4 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:08:17 +00:00
Orion Hodson
4cca7f0aed Switch from legacy to native mode for ICH4 and ICH5.
Submitted by: Shin-ichi YOSHIMOTO <yosimoto@waishi.jp>
Test by: Markko Merzin <markko@short.cut.ee>
PR: kern/53242
MFC after: 5 days
2003-08-10 14:57:47 +00:00
Cameron Grant
e2df178350 * support ich5
PR:		kern/53242
Submitted by:	Shin-ichi Yoshimoto <yosimoto@waishi.jp>  (partly)
Tested by:	Dominic Marks <dom@cus.org.uk> (version in PR)
MFC after:	1 week
2003-07-06 23:54:00 +00:00
Cameron Grant
b6eb8f8a31 * add support for amd-768 audio, as used on many dual athlon boards. only
tested for playback.

* modify device name strings for ich chips to better conform with their
common names.

* remove superflous 'AC97 controller' from nforce device names.

MFC after: 1 week
2003-07-06 03:11:06 +00:00
Scott Long
f6b1c44d1f Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
Matthew N. Dodd
533294b956 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
Orion Hodson
538b04e4ad Fix mismatch between bus address stored for buffer descriptors and
actual address of buffer descriptor.  This should fix the reported
calibration failures and subsequent speed problems with ich chipsets.

Minor calibration comment updates.
2003-04-04 07:15:19 +00:00
Olivier Houchard
38cc994207 Implement a "sndbuf_getbufaddr" function and use it instead of vtophys().
Reviewed by:	orion
2003-02-20 17:31:12 +00:00
Orion Hodson
a7697e5514 Add nForce2 device id.
Submitted by:	"Mikko S. Hyvarinen" <morphy@morphy.iki.fi>
MFC after:	5 days
2003-01-13 17:42:13 +00:00
Orion Hodson
14213e7d3e Cater for ich4 quirks.
Reported by: Jacob Rhoden
Tested by: Jacob Rhoden, mp
2002-08-19 16:03:56 +00:00
Mark Peek
eabc182e02 Add PCI ID for the ICH4 AC97 controller. 2002-08-12 15:45:12 +00:00
Scott Long
f4df40b218 Delay the AC97 calibration until after the system clock has been
calibrated.  This fixes the problem where playback and recording do
not run at the correct speed.  It probably also eliminates the
need for the hacks/workarounds/sysctl's that were previously
devised to deal with this, but I will leave that for a different
time.

Reviewed by:	orion
2002-06-27 22:36:01 +00:00
Orion Hodson
7dace039d8 No longer attempt to power off the ACLINK during suspend - luigi
reports this causes his ich machine to hang.
2002-05-05 15:37:09 +00:00
John Baldwin
77b6db948d Recognize the AC97 interface to the onboard sound controller on the Nvidia
nForce chipset.  Playback at least seems to work fine with the ich driver
out of the box.

Sponsored by:	The Weather Channel
Help from:	cg
2002-04-15 20:42:40 +00:00
John Hay
fcd478479d Fix the play / record rate setting so that it actually works.
The extra microphone channel capability is part of the "normal" ac97
capabilities and not an extended ac97 capability. Now recording on
codecs without a seperate mic channel works.

MFC after:	1 week
2002-04-14 10:39:59 +00:00
Alfred Perlstein
472cd8b5ef Add play (but not record) support for the Sis 7012.
Submitted by: Mike Meyer <mwm@mired.org>
2002-02-19 00:59:23 +00:00
Orion Hodson
bd8e0aee01 Change ich_calibrate to busy wait on buffer fill level and use a more
likely looking rate calculation.

Install interrupt handler before calling ich_init as the initialization
occasionally generates spurious interrupts.

These changes are derived from cg's work in progress version of this
driver.
2002-01-18 18:44:41 +00:00
Orion Hodson
aaa167872e Save and restore state for suspend/resume.
PR:		kern/28692
Obtained from:	SAKIYAMA Nobuo <sakichan@sakichan.org>
2001-12-21 19:20:28 +00:00
Orion Hodson
df6ee7b7a1 Correct unexpected interrupt detection. 2001-12-19 18:26:53 +00:00
Orion Hodson
faee270315 Nitlets. 2001-12-19 18:04:04 +00:00
Orion Hodson
23d2179744 Clear resume interrupts - these can occur during initialization and
must be cleared to prevent machine hanging (presently aflicts -current
and -stable).

Problem reported by Bruce Montague <brucem@cse.iitkgp.ernet.in>

PR:		kern/29769 (probably)
2001-12-19 17:38:38 +00:00
Orion Hodson
0225c5ac86 Add calibration test to determine extent of AC97 overclocking (if any). 2001-12-18 03:29:31 +00:00
Orion Hodson
2ae4ee833d Added a sysctl control variable "ac97rate" to allow manual tuning of
the link rate - some ich motherboards overclock ac97 out of the box.

Will hopefully replace this with a callibration loop in time for 4.5R
freeze.

Problem reported by Luigi Rizzo and fix derived from his code (put
diff in ich.c rather than ac97.c).

MFC after:	3 days
2001-12-17 01:57:42 +00:00
Orion Hodson
21f3068887 Fix typo introduced with last commit. 2001-11-22 23:38:26 +00:00
Orion Hodson
eb5b9d0b87 Correct extmode initialization.
MFC after:	3
2001-11-21 04:26:04 +00:00
Peter Wemm
aaa3add4ea Add Id for 82801CA (ICH3?). The ich driver seems to work fine on the
laptop that had it.
2001-11-03 05:07:59 +00:00
Cameron Grant
82ab7a3bc2 * register the correct number of channels
* include hw buffer size in sndstat info
2001-10-07 23:31:52 +00:00
Cameron Grant
fca71897c4 don't enable the mic record channel unless the codec supports it.
allow hardware buffer size to be specified using hints.
2001-09-18 14:53:01 +00:00
Cameron Grant
9924faf6e7 * change buffering method a bit
* swap record/mic channels
* initialise all channels
* align dma buffers to 8 bytes

Submitted by:	Katsurajima Naoto <raven@katsurajima.seya.yokohama.jp>
(mostly)
2001-08-29 02:31:03 +00:00
Cameron Grant
67b1dce3bc many changes:
* add new channels to the end of the list so channels used in order of
addition

* de-globalise definition of struct snddev_info and provide accessor
functions where necessary.

* move the $FreeBSD$ tag in each .c file into a macro and allow the
/dev/sndstat handler to display these when set to maximum verbosity to aid
debugging.

* allow each device to register its own sndstat handler to reduce the amount
of groping sndstat must do in foreign structs.
2001-08-23 11:30:52 +00:00
Cameron Grant
41a019c08d * simplify
* add support for mic record channel

* add support for setblocksize

* make mpsafe

* make getptr accurate

* reduce buffer size from 64k to 16k for better synchronisation
2001-07-03 17:27:13 +00:00
Brian Feldman
5e6abe66d8 Detect the device on e.g. Dell OptiPlex GX110s. 2001-07-02 15:29:38 +00:00
Cameron Grant
1b6c76a2fe intel ich/ich2 driver - this needs some work but is functional enough for
the impatient.

Hardware...
Provided by:    ps
Lost by:        <censored>
Found by:       <censored>
Not delivered by:       Ashley Penney <ashp@unloved.org>
Retrieved by:   greid, Andrew McKay <andy@openirc.co.uk>
Delivered by:   Andrew McKay <andy@openirc.co.uk>

PR:             kern/25507
Submitted by:   Katsurajima Naoto <raven@katsurajima.seya.yokohama.jp>
2001-07-01 19:38:58 +00:00