d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
128,620 Commits 72 Branches 135 Tags 3.2 GiB
82c1155773
Commit Graph

11180 Commits

Author SHA1 Message Date
Ruslan Ermilov
e3e159816a New timezone data. 
Obtained from:	ftp://elsie.nci.nih.gov/pub/tzdata2006n.tar.gz
 2006-10-13 10:00:49 +00:00
Joel Dahl
02c653255c Add netgroup(5) to SEE ALSO. 
PR:		docs/84764
Submitted by:	garys
 2006-10-13 09:02:59 +00:00
Ruslan Ermilov
25ca9fb48d Deal with two more references to non-existing ndisapi(9). 2006-10-13 06:24:53 +00:00
Tom Rhodes
9b9879cb89 Kill reference to ndisapi.9 here as well, it doesn't exist. 
PR:		82114
 2006-10-13 03:54:22 +00:00
Andrew Thompson
989b9cb6bd Fix a few nits with the last revision 
- bump document date
 - fix punctuation and whitespace

Pointed out by:		bmah
 2006-10-11 18:26:04 +00:00
Ruslan Ermilov
4de836fce3 Fix the prompt string. 2006-10-11 07:07:31 +00:00
Bruce Evans
4ef33d554a Document the `kill' command. 
Submitted by:	Allan Fields <bsd@afields.ca>
PR:		82779
 2006-10-10 23:09:10 +00:00
Bruce Evans
6e4da6de20 Sort some of the most inconsistently ordered descriptions of commands 
(the group of watchpoint commands, and the `reset' command).

NetBSD has sorted everything alphabetically, but I think we would have
too many commands for that if all commands were actually documented
here, so this commit moves towards alphabetical order in several sections:
- section for pure ddb (non-"show") commands.  Now contains the watchpoint
  commands and is mostly in "logical" order.
- section for pure ddb "show" commands
- similarly for auxilary commands.  Most of these are currently missing
  here.
 2006-10-10 11:07:37 +00:00
Tom Rhodes
5e28de260c Patch in previous commit should have bumped doc date. 
Fix spelling of ioctl.
Note that previous commit was actually submitted by bz.  I'm not yet used
to the code boxes yet.

Noticed by:	ru
 2006-10-09 19:53:00 +00:00
Tom Rhodes
a29721a8cb The SIOCSIFNETMASK ioctl was removed from tun.c, thus remove mention of 
it in the tun.4 manual page.

PR:		98541
Submitted by:	David Gilbert
 2006-10-09 19:20:53 +00:00
Ruslan Ermilov
e230c2c3ca Fix markup. 2006-10-09 15:21:50 +00:00
Ceri Davies
e3643455a3 Add more .Xr's. 
MFC after:	6 days
 2006-10-09 12:50:16 +00:00
Bruce Evans
355938faba Document new aliases b', t' and `registers'. Document old aliases 
`bt', `c', `d', `p', `s', `w' and `where'.
 2006-10-09 02:27:55 +00:00
Joel Dahl
8ea32c5e36 Update the list of codecs as well... 2006-10-08 19:57:53 +00:00
Joel Dahl
fd80809d23 Update list of supported hardware. 2006-10-08 19:41:37 +00:00
Andrew Thompson
69f35a88d2 - Note that the bridge uses a random MAC and can be overridden. 
- Provide an example of assigning an IP to the bridge.

PR:		kern/102607
Submitted by:	Stefan Bethke <stb@lassitu.de>
MFC after:	3 days
 2006-10-08 19:41:05 +00:00
Ceri Davies
272bf9a8ff Add a basic manpage for geom_uzip(4). 
Reviewed by:	trhodes
MFC after:	1 week
 2006-10-08 17:05:15 +00:00
Florent Thoumie
bd4029713f Add support for Novatech NV902 wireless NIC in ural(4). 
PR:		usb/102852
Submitted by:	Jonathan Fosburgh <jonathan@fosburgh.org>
MFC after:	3 days
 2006-10-07 18:18:40 +00:00
Florent Thoumie
774b7afefb Add support for Epson Stylus CX4200 in uscanner(4). 
PR:		usb/102851
Submitted by:	Jonathan Fosburgh <jonathan@fosburgh.org>
MFC after:	3 days
 2006-10-07 18:09:27 +00:00
Florent Thoumie
cfa3f4d8ab Add support for Psion Gold Port Ethernet USB NIC. 
PR:		usb/102296
Submitted by:	Volker <volker@vwsoft.com>
MFC after:	3 days
 2006-10-07 18:03:39 +00:00
Florent Thoumie
d25cbeac2c Add support for Netgear FA101 ethernet USB NIC. 
PR:		usb/102286
Submitted by:	Volker <volker@vwsoft.com>
MFC after:	3 days
 2006-10-07 17:58:50 +00:00
Florent Thoumie
ec53db837e De-capitalize days and months' names. 
PR:		conf/101154
Submitted by:	Thomas Jensen <tj@pil.dk>
MFC after:	3 days
 2006-10-07 17:04:23 +00:00
Florent Thoumie
da9b42184b - Add support for Epson USB Scanners (3590 [1] and 4990 [2]). 
- Add entries in the uscanner.4 man page (along with missing 3500).

PR:		usb/100957 [1], usb/100992 [2]
Submitted by:	Jim Teresco <terescoj@teresco.org> [1],
		Walter C. Pelissero <walter.pelissero@iesy.net> [2]
MFC after:	3 days
 2006-10-07 16:00:59 +00:00
Florent Thoumie
5bfeaa3839 Add a missing whitespace. 
Reported by:	simon
Approved by:	cperciva (mentor, implicit)
 2006-10-07 10:00:22 +00:00
Dejan Lesjak
eb91fad699 Remove X11BASE from here so the one from bsd.port.mk has a chance to set 
default. Grepping through src shows only gnu/usr.bin/groff which doesn't
use it in src build and OpenSSH for which this was a NOOP.

Discussed with:	des, ru
Approved by:	ru
 2006-10-06 23:32:23 +00:00
Florent Thoumie
2440a169c5 Introduce mixer_enable (default: YES). 
PR:		conf/101268
Submitted by:	Eugene Grosbein <eugen@grosbein.pp.ru>
Approved by:	cperciva (mentor)
X-MFC after:	6.2-RELEASE
Sponsored by:	FreeBSD Test-Bugathon
 2006-10-06 23:22:13 +00:00
Simon L. B. Nielsen
4517aab293 - Remove SCHED_ULE from GENERIC to better avoid foot-shooting by 
unsuspecting users.
- Add a comment in NOTES about experimental status of SCHED_ULE.
- Make warning about experimental status in sched_ule(4) a bit
  stronger.

Suggested and reviewed by:	dougb
Discussed on:			developers
MFC after:			3 days
 2006-10-05 20:31:58 +00:00
Ruslan Ermilov
289f7a5e01 Sort SUBDIR. 2006-10-05 13:42:30 +00:00
Ruslan Ermilov
72377e4c4b Sort MAN and MLINKS lists. 2006-10-05 12:40:44 +00:00
John-Mark Gurney
32d5d9ffc9 sort MLINKS properly 
Pointed out by:	ru
 2006-10-05 08:55:35 +00:00
Ruslan Ermilov
74a603eb00 Polish markup and some wording. 
Discussed with:	jmg (also reviewed by him)
 2006-10-05 08:42:07 +00:00
John-Mark Gurney
b5cc2eb72f forgot to update the date... 2006-10-04 20:17:14 +00:00
John-Mark Gurney
90db62aca6 add man page talking about how to interface w/ the kqueue system so others 
can write additional filters...

mdoc police please!
 2006-10-04 20:16:23 +00:00
Ruslan Ermilov
aed19ad525 Format the list of commands so that the output looks nicer, 
by putting command aliases on the adjacent lines.

Prodded by:	bde
 2006-10-03 21:06:19 +00:00
Andre Oppermann
b2c1b09193 Connect hash(9) to the build and add MLINKS for all functions. 
Pointed out by:	ru
 2006-10-02 11:51:25 +00:00
Konstantin Belousov
7251f55777 Remove long untrue note about storing state information inside free items. 
OKed by:	rwatson, tegge
Approved by:	pjd (mentor)
MFC after:	1 week
 2006-10-02 07:27:00 +00:00
Andrey A. Chernov
2eb6639bf4 Add mn_MN.UTF-8 
Submitted by:   Ganbold <ganbold@micom.mng.net>
 2006-10-02 00:36:52 +00:00
Andrey A. Chernov
8a7dcaf4f9 Add mn_MN.UTF-8 2006-10-02 00:23:14 +00:00
Joel Dahl
81eb50fde2 Xref snd_hda(4). 2006-10-01 11:19:27 +00:00
Joel Dahl
d96143bd3f Add a manual page for snd_hda(4) and hook it up to the build. 
Reviewed by:	brueffer, ariff
 2006-10-01 11:16:31 +00:00
Ruslan Ermilov
8ed6451eab Markup glitch. 2006-09-30 20:37:37 +00:00
Ruslan Ermilov
04876cf3eb Require rpc.lockd(8) only if make is running with the -j option. 2006-09-30 20:18:28 +00:00
Alexander Leidinger
9faa7e6cd2 Add man page for snd_envy24ht(4). 2006-09-30 18:04:57 +00:00
Alexander Leidinger
586697a94c Add the snd_spicds(4) man page. 2006-09-30 17:30:02 +00:00
Alexander Leidinger
d5bc223a98 - it uses the spicds driver now, change the kernel compile instructions 
- add info about the chipsets
 2006-09-30 17:19:22 +00:00
Ruslan Ermilov
bd84dd2f8f Revise markup. 2006-09-30 17:09:59 +00:00
Ruslan Ermilov
8167eab9ef Revise markup. 2006-09-30 16:01:33 +00:00
Ruslan Ermilov
ae91966b64 Revise markup. 2006-09-30 15:14:49 +00:00
Ruslan Ermilov
d053cbd0cf Fixed small markup glitches and removed the CAVEATS section. 2006-09-30 14:30:07 +00:00
Ruslan Ermilov
a4f3c15342 Document ioctls differently, like is done in other section four manpages. 2006-09-30 13:34:46 +00:00
Ruslan Ermilov
85213a8004 Revise markup. 2006-09-30 11:48:12 +00:00
Ruslan Ermilov
69d09334bd Regen (removal of WITHOUT_LIBC_R). 2006-09-30 11:34:22 +00:00
Ruslan Ermilov
2e97500669 Removed libc_r build support. 2006-09-30 11:32:46 +00:00
Ruslan Ermilov
5bb9f2101b Remove mentions of libc_r. 2006-09-30 11:22:26 +00:00
Ruslan Ermilov
7d9ffd6204 Spelling. 2006-09-29 22:51:04 +00:00
Bruce M Simpson
910e1364b6 Nits. 
Submitted by:	ru
 2006-09-29 16:16:41 +00:00
Bruce M Simpson
2d20d32344 Push removal of mrouted down to the rest of the tree. 2006-09-29 15:45:11 +00:00
Ruslan Ermilov
9af8612e8c Don't run install-info under lockf if not installing in parallel. 
Requested by:	rwatson
 2006-09-29 15:36:19 +00:00
Daniel Gerzo
eb2d52f4b8 Revert my previous change as it does not seem to be entirely correct and 
popular.
 2006-09-27 21:28:44 +00:00
Matt Jacob
cd6dedfc61 Bump MAX_INITIATORS to 1024- the LSI-Logic can go even higher than 
this for 'initiator id'- this is a stopgap until a sparse map is
added.

Make compat defines for offset format (FreeBSD 5 or less).

Add no-asyncio flag. There's some breakage with ASYNC I/O that every
now and then drops us into an infinite loop. This also then does
a fallback to no-asyncio if the AIO option isn't loaded/compiled into
the kernel.

A number of other chanes to try and track some breakage.
 2006-09-27 15:38:13 +00:00
Pawel Jakub Dawidek
e5cccaf001 - Use existing functions mtx_lock() and mtx_unlock(). 
- Change variable name to 'error', as this is what is mostly used for
  functions that return an error.
- Add mutex(9) to the SEE ALSO section.
- Bump the date.

I don't really like the example code. I'd prefer symmetry where possible, eg.

	mtx_lock(&example_lock);
	error = example(NULL, EXAMPLE_ONE);
	mtx_unlock(&example_lock);
	if (error != 0)
		return (error);

But I'll leave it as it is for now.

Reviewed by:	simon
 2006-09-27 08:39:00 +00:00
Daniel Gerzo
19ee36f1e5 Remove second person from the sentece and rephrase a bit. 
Approved by: trhodes (mentor), keramida (mentor)
 2006-09-26 19:59:52 +00:00
Warner Losh
fa81ece897 Document config_intrhook. 
MFC After: 250 millifortnights
 2006-09-25 20:12:13 +00:00
Daniel Gerzo
e1bd11be7b - move steps describing how to gain ipdivert support to SYNOPSIS and 
follow the style of other section 4 manual pages
- add ipfw(4) to SEE ALSO section

Reviewed by: ru
Approved by: trhodes (mentor), keramida (mentor)
 2006-09-24 13:58:44 +00:00
Scott Long
0d7c37283e Add documentation on the new bge tunable. Also put the tunable docs into a 
separate section.
 2006-09-23 19:04:01 +00:00
Maxim Konovalov
0029d6425f o Add pthread_yield.3 man page. 
PR:		docs/100083
Reviewed by:	deischen, ru
Obtained from:	OpenBSD
MFC after:	2 weeks
 2006-09-18 18:07:49 +00:00
Ruslan Ermilov
81ae4b8da9 Markup fixes. 2006-09-18 15:24:20 +00:00
Ruslan Ermilov
584eddcad1 Fix wording to what I intended originally. 2006-09-18 15:18:54 +00:00
Ruslan Ermilov
a3a57e81b3 Correct the list of bus_space_*_stream_[1248] functions in the 
STREAM FUNCTIONS section:

- Really list only and all *_stream_* functions.
- Don't list their arguments (it's pointless).
 2006-09-18 14:31:03 +00:00
Ruslan Ermilov
827293df54 hw.syscons.kbd_kbdkey is actually named hw.syscons.kbd_debug. 2006-09-18 13:11:31 +00:00
Ruslan Ermilov
ad9fae588f - Avoid using second person. 
- Demonstrate how .Nm can be used without the side effect of causing
  a line break in the SYNOPSIS section.
 2006-09-18 11:56:51 +00:00
Maxim Konovalov
be3253cad8 o Document 'make quicksearch'. 
PR:		docs/103162
Submitted by:	Lars Engels
MFC after:	1 week
 2006-09-18 11:49:17 +00:00
Maxim Konovalov
bbc6c31310 o Grammar. 2006-09-18 11:04:08 +00:00
Christian Brueffer
cb7e673ccc - Instead of listing which ships support Rx/Tx checksum offload and Jumbo 
Frames, mention the one chip that does not support them (obtained from
  the driver README)
- Mention TSO and the chips that do not support it (provided by pdeuskar)
- Do not refer to the README for VLAN support, building and installing
  the driver
 2006-09-15 20:52:51 +00:00
Christian Brueffer
d3e7e72eaf Mention TSO support. 2006-09-15 19:33:15 +00:00
Pawel Jakub Dawidek
679f8b7e7a Add 'show geom [addr]' ddb(4) command, which prints entire GEOM topology if 
no additional argument is given or details about the given GEOM object
(class, geom, provider or consumer).

Approved by:	phk
 2006-09-15 16:36:45 +00:00
David E. O'Brien
e2e1ab1c94 When building WITHOUT_ASSERT_DEBUG, we need to disable -Werror as its easy 
to see "warning: unused variable `foo'".
 2006-09-13 23:27:21 +00:00
John Baldwin
2511ffba93 Correct include path. 2006-09-13 21:11:13 +00:00
Joel Dahl
3e1f331553 Remove references to the pam(8) manual page. It does not exist. 
Requested by:	novel
Discussed with:	brueffer, simon
 2006-09-13 17:46:20 +00:00
Gleb Smirnoff
85bfbb5f09 Fix markup bug in last commit. 
Submitted by:	ru
 2006-09-13 15:47:26 +00:00
Gleb Smirnoff
708e9ef188 Document net.inet.tcp.maxtcptw and net.inet.tcp.nolocaltimewait. 
Wording by:	Devon O'Dell
 2006-09-13 15:24:27 +00:00
Ruslan Ermilov
bb077f2d54 - Change the example CFLAGS entry to match our default in sys.mk. 
- Document that -fno-strict-aliasing is required for -O2.

Prodded by:	users of stable@
 2006-09-13 10:20:56 +00:00
Warner Losh
32494417a8 Bump date, per ru@ 2006-09-12 15:48:22 +00:00
Warner Losh
788de9d472 Add note about identify routines needing to use BUS_ADD_CHILD rather 
than device_add_child.  The latter is only for busses adding children,
not children drivers telling a bus that they have an instance...
 2006-09-11 22:17:18 +00:00
Ruslan Ermilov
e567b213c5 Regen. 2006-09-11 13:56:28 +00:00
Warner Losh
4df1f59e8f Add a knob for compiling the tree -DNDEBUG. This turns off all the 
asserts and makes binaries smaller.  The binaries also become
repeatable again.  As it was, without this md5's of binaries built
with different paths differed.

# Where do I document this?
 2006-09-11 05:35:57 +00:00
Ruslan Ermilov
590fd053c0 Document that bits are numbered from 1 in the %b format argument. 2006-09-08 14:05:03 +00:00
Tom Rhodes
8d3cfc6184 So there is where that handbook paragraph came from. Kill it here too. 
Remove a paragraph about over building security, it's a bit off.

Discussed with: des, FreeBSD-security
 2006-09-08 04:56:21 +00:00
Ruslan Ermilov
f80a2d649e Fix the markup. 
Prompted by:	imp
 2006-09-07 08:31:59 +00:00
Warner Losh
723e155201 Mostly re-write man page to reflect current state of this interface. 
Warn of races.

# Doc police: Please review
 2006-09-06 21:43:55 +00:00
Ruslan Ermilov
26acbcd1ba - Move descriptions of BOOT_COMCONSOLE_PORT, BOOT_COMCONSOLE_SPEED, 
and LOADER_TFTP_SUPPORT options into the world section since boot
  blocks are built as part of the world.

- Document BOOT_PXELDR_ALWAYS_SERIAL and BOOT_PXELDR_PROBE_KEYBOARD
  options of pxeboot(8).

MFC after:	3 days
 2006-09-05 20:00:07 +00:00
Pawel Jakub Dawidek
03b33e9928 Document 'show vnode'. 
Reminded by:	ru
 2006-09-05 12:17:53 +00:00
Marius Strobl
0ab9d31cdb - Talk about chips rather than chip sets as AMD LANCE and PCnet are 
single-chip.
- Add some more rationale about le(4).
- Add/un-comment hardware notes for C-Bus and ISA adapters.
 2006-09-04 16:45:08 +00:00
Tom Rhodes
e6836db530 Reword previous commit, now supporting better English. 
Discussed with:	ceri
 2006-09-04 10:20:53 +00:00
Tom Rhodes
0f3eaf0932 Belated update for login.conf checks. 
Bump doc date.
 2006-09-03 21:31:20 +00:00
Christian Brueffer
10ce24c563 Document VIA 8237A support. 2006-09-03 11:33:52 +00:00
John-Mark Gurney
d1c32d02b6 now that we have bus_get_dma_tag, document it's requirement in 
bus_dma_tag_create
 2006-09-03 00:31:21 +00:00
Marius Strobl
347658223d - s/UltraSparc/UltraSPARC/ 
- Add info about the requirement of OFW support.
 2006-09-02 20:15:21 +00:00
Marius Strobl
13311d237e Add the usual info about loading as module on startup to the SYNOPSIS. 2006-09-02 12:12:16 +00:00
Robert Watson
c6c571f1e3 s/6.1/6.2/ as the introduction date for kernel audit support. 
Obtained from:	TrustedBSD Project
 2006-09-02 11:55:38 +00:00
Marius Strobl
ee967d5eb1 Replace the .Pq added in rev 1.2 with literal parenthesis as the former 
aren't required for plain text and the latter formats faster.

Pointed out by:	ru
 2006-09-01 21:54:58 +00:00
Marius Strobl
092f607db8 - s/gigabit/Gigabit/ 
- Talk about supported chips rather than supported cards as the majority
  of the hardware supported by gem(4) is on-board.
- "the .Nm driver"
- Sort the list of supported chips alphabetically.
- Sun GEM aren't used on-board though, so don't claim they'd be.
- Add a CAVEATS section informing that Sun GEM cards aren't supported
  so far.

MFC after:	1 day
 2006-09-01 21:42:22 +00:00
Marius Strobl
94d8eb4fc7 - Use full name of the Sun PGX64 cards and add the Sun part number 
in order to simplify matters for people who are looking for a video
  card supported by FreeBSD/sparc64.
- Add Sun PGX to the list of known working cards.

MFC after:	1 day
 2006-09-01 20:41:59 +00:00
Marius Strobl
851bf68fae Move two periods out of quotes and to where they belong. 
MFC after:	1 day
 2006-09-01 20:01:51 +00:00
Marius Strobl
91be44de19 Add references to scc(4) as it hangs off of ebus(4) and sbus(4) 
respectively.
 2006-09-01 19:51:26 +00:00
Daniel Gerzo
910201d9b8 - Move available kernel options to SYNOPSIS, describe how to enable ipfw 
from within rc.conf.
- Remove IPDIVERT kernel option
- Add notes about IPFIREWALL_DEFAULT_TO_ACCEPT and IPFIREWALL_FORWARD

Reviewed by: ru
Approved by: keramida (mentor), trhodes (mentor)
MFC after: 1 week
 2006-09-01 08:50:05 +00:00
Daniel Gerzo
bf87e1ab26 Remove redundant vnconfig(8) from SEE ALSO section as it is linked to 
mdconfig(8) on RELENG_[56] and HEAD, which is referenced too.

Approved by: keramida (mentor), trhodes (mentor)
MFC after: 1 week
 2006-09-01 08:30:03 +00:00
Ruslan Ermilov
07bf564cab - Fix some bugs in the descriptions of DMA sync operations. 
- Tweak some text so it's less likely to confuse the reader.

OK'ed by:	scottl
 2006-08-31 19:38:52 +00:00
Colin Percival
48ffe56ac5 Add FreeBSD Update 2.0 client code. The build code is in the projects 
repository.

Sponsored by:	FreeBSD security development fundraiser
 2006-08-31 09:51:34 +00:00
Ruslan Ermilov
384555d978 - Remove yet another mention of minor number construction 
which is not applicable today.

- Provide an example of how to lock a speed.
 2006-08-30 14:38:42 +00:00
Daniel Gerzo
129518b229 Add nanobsd(8) manual page. 
Reviewed by: ru
Approved by: trhodes (mentor), keramida (mentor)
MFC after: 1 week
 2006-08-29 09:12:48 +00:00
Ruslan Ermilov
ca7f20f57f The kvm_mkdb(8) is long dead. 2006-08-29 08:49:58 +00:00
Ruslan Ermilov
8a4ebec273 Markup polishing. 2006-08-29 08:43:09 +00:00
Dmitry Morozovsky
d38677f531 Chase after phk@: remove reference to (now obsoleted) NMBCLUSTERS. 
MFC after:	1 week
 2006-08-26 21:24:22 +00:00
Robert Watson
9fe741b895 Allow the user process to query the kernel's notion of a maximum 
audit record size at run-time, which can be used by the user
process to size the user space buffer it reads into from the audit
pipe.

Perforce change:	105098
Obtained from:		TrustedBSD Project
 2006-08-26 17:59:31 +00:00
Pawel Jakub Dawidek
44689dc087 Update. 2006-08-26 11:32:40 +00:00
Warner Losh
b608b4520b Pass whatever the value of NM down to lorder. This allows one to 
override NM in Makefiles when, for example, cross compiling and have
that value be used by lorder.  NM normally isn't defined, so we pass a
null value to lorder.  lorder says 'NM=${NM-nm}' which causes it to
pickup the default value.
 2006-08-25 23:50:05 +00:00
Pav Lucistnik
2eec31dfb4 - Talk about memory allocation in interrupt context 
- Add uam to see also

Submitted by:	Devon H. O'Dell <devon.odell@coyotepoint.com>
 2006-08-25 19:04:42 +00:00
David E. O'Brien
489ffb7126 Don't read in /etc/src.conf when building ports. 
Reported by:	obrien
Submitted by:	ru
 2006-08-24 18:04:49 +00:00
Daniel Gerzo
354a23892f - add note about IPSEC_FILTERGIF to fast_ipsec(4) and let the users know 
that it is not possible to use Fast IPsec in conjuction with KAME IPsec
- add available kernel options to ipsec(4)
- add reference for fast_ipsec(4) to ipsec(4)

Reviewed by: trhodes (mentor), keramida (mentor)
Approved by: keramida (mentor)
 2006-08-24 17:07:19 +00:00
Roman Kurakin
5eedd41e3b Fix path for source file in files.FOO. 2006-08-23 23:51:29 +00:00
Florent Thoumie
3081bf98bf Backout this commit since it breaks startup and some scripts in 
certain conditions. I haven't been able to find a better solution yet:

    - Set a two read-only variables (${prefix} and ${etcdir}). This is
    especially useful when using /etc/rc.d scripts with third-party
    software installed from ports.
    - Fix rc.d/sshd to work with openssh from ports using ${etcdir}
    instead of hardcoded /etc.
    - Reflect prefix/etcdir changes in rc.subr.8.

        src/etc/rc.d/sshd: rev 1.9 -> 1.10
        src/etc/rc.subr: rev 1.51 -> 1.52
        src/share/man/man8/rc.subr.8: rev 1.11 -> 1.12

Approved by:	cperciva (mentor)
 2006-08-22 11:17:29 +00:00
Ruslan Ermilov
2b46c64c9c Remove alpha left-overs. 2006-08-22 08:03:01 +00:00
Konstantin Belousov
653ed924e4 Note that LK_UPGRADE may drop the shared lock before taking the 
exclusive one.

Reviewed and edited by:	tegge
MFC after:	3 days
Approved by:	pjd (mentor)
 2006-08-21 12:45:19 +00:00
Warner Losh
be57e3dd35 Bump date, forgotten in 1.13 2006-08-20 05:56:00 +00:00
Warner Losh
2621688657 Add a few devices that have been added recently. 2006-08-20 05:54:45 +00:00
Christian Brueffer
e2e472c7a3 Use our standard section 4 SYNOPSIS layout. 
MFC after:	2 weeks
 2006-08-18 10:22:36 +00:00
Brian Somers
04e0bd8b80 Bump the document date. 
Suggested by: ru
 2006-08-17 20:10:34 +00:00
Brian Somers
9341e8dd88 Add a -p switch to dhclient. The switch tells dhclient to persist 
despite the interface link status.

Add dhclient_flags_iface and background_dhclient_iface rc.conf options.
(where iface is a specific interface).  These can be used to give
interface specific flags to dhclient.

Reviewed by:	brooks@
 2006-08-17 17:12:27 +00:00
Ruslan Ermilov
a5c73bad83 I'm about to merge these only now, so correct the first release 
of their appearence to be 6.2.
 2006-08-17 10:55:49 +00:00
Christian Brueffer
3cd78e6c42 Note Intel ICH8 and ESB2 support. 2006-08-15 08:27:38 +00:00
Ruslan Ermilov
2c26fcf3a9 The BUILDNAME variable need not be specified. 2006-08-14 09:34:32 +00:00
Christian Brueffer
9e4e177fb2 Convert to the standard section 4 SYNOPSIS layout. 
MFC after:	3 days
 2006-08-13 18:44:18 +00:00
Dag-Erling Smørgrav
26e03c2f92 Revert previous commit. Pre-Nehemiah C3 CPUs do have 3DNow!; it doesn't 
show up in dmesg because identcpu.c only looks for it on Intel and AMD
processors.
 2006-08-13 08:47:41 +00:00
David E. O'Brien
c157a036a9 Add an extension to the UINT & ULONG types. The XINT & XLONG types behave 
the same, except sysctl(8) will print out the values in hex.
 2006-08-12 23:33:10 +00:00
David E. O'Brien
b470b929f3 Fix bug preventing the proper displaying of the CTLFLAG_WR option. 2006-08-12 20:09:33 +00:00
Yaroslav Tykhiy
6572700ea5 Fix incorrect .Xr syntax I introduced in the previous commit. 
Noticed by:	ru
X-MFC with:	rev. 1.31
 2006-08-12 17:11:43 +00:00
Dag-Erling Smørgrav
75b7c4a871 I don't know where I got the idea that the VIA C3 has 3DNow!; it doesn't. 
It does have MMX (though MMX support is reputed to be incomplete in early
generations), and later generations have SSE.

MFC after:	2 weeks
 2006-08-12 09:46:43 +00:00
Dag-Erling Smørgrav
513f04ca55 Reintroduce CSTD, which allows a Makefile to specify the precise dialect 
of C in which the program or library is written.

Note that this is *not* intended to be used across the whole tree.  It
is intended to be used for individual libraries or programs which use
specific language features which the compiler must know about in order
to produce correct warnings at high WARNS levels.

MFC after:	1 month
 2006-08-11 17:28:59 +00:00
Yaroslav Tykhiy
f6e5e0ad77 Optionally pad outgoing frames to the minimum of 60 bytes (excl. FCS) 
before tagging them.  This can help to work around brain-damage in some
switches that fail to pad a frame after untagging it if its length drops
below the minimum.  This option is blessed by IEEE Std 802.1Q (2003 Ed.),
paragraph C.4.4.3.b.  It's controlled by sysctl net.link.vlan.soft_pad.

Idea by:	az
MFC after:	1 week
 2006-08-11 17:09:27 +00:00
Gleb Smirnoff
f366efa96f Some perfectionizm against last revision. 
Submitted by:	ru
 2006-08-10 11:07:11 +00:00
Nate Lawson
1843f0c337 The acpi module is no different from others. If it is loaded while the kernel 
has it compiled in, it will be rejected with "module acpi already present!"
and no strange behavior.

MFC after:	1 day
 2006-08-10 06:32:16 +00:00
Roman Kurakin
d339df73a5 - Added ability to provide (optional) path to the kernel sources 
- Added check of dirs used by example generator
- Fixed path for ${s}/conf/files.FOO and include it via files
  directive from config file
- Changed kernel configuration example with the driver: it is
  not produced by copying Generic but by including it
- KDB is added to config (for DDB)
- Added module building instead and fixed kernel building

Reviewed by:	julian@
 2006-08-09 21:23:42 +00:00
Roman Kurakin
00cbc48be6 Added copyright templete 
Fixed compilation

Reviewed by:	julian@
 2006-08-09 20:57:24 +00:00
Roman Kurakin
be11502127 - Added 'files "files.FOO"' to config for inclusion of user specific files. 
- Added KDB option to config file (for DDB).
- Added ability to compile custom kernel.

Discussed with:	julian@
 2006-08-09 10:53:26 +00:00
Gleb Smirnoff
b1ba28df1d Fix ng_pppoe(4) after turning off "autosrc feature" on ng_ether(4). 
- Store the Ethernet header in node softc.
- Initialize header with dst addr and ethertype in node
  constructor method.
- In node connect method send NGM_ETHER_GET_ENADDR message
  downwards.
- If received reply from ng_ether(4) store the src addr
  in softc.
- Add NGM_PPPOE_SETENDADDR message that allows user to
  override the address with whatever he/she wants.
 2006-08-09 09:56:58 +00:00
Bruce M Simpson
a07fb7be3b Add Epson Stylus CX3650. 
Update Dd.

Requested by:	brueffer
 2006-08-08 15:42:31 +00:00
Yaroslav Tykhiy
03335ffbe9 Fix things I misadvised to Nate Lawson: 
- "Ns No" is redundant, so reduce it to just "Ns";
- use Li to mark up CPU and system power states because here they are
  just strings to be typed literally (add more such mark-up as well);
- the best practice of typesetting tells us to use an en-dash to
  indicate a closed range; fortunately, groff_char(7) provides such a symbol.

In addition, consistently use a comma between independent clauses
coordinated by a conjunction.

Pointed out by:	ru (mark-up part)
MFC after:	3 days
 2006-08-07 07:28:47 +00:00
Roman Kurakin
36a64d1321 - Added ability to provide (optional) path to the kernel sources 
- Fixed path for ${s}/conf/files.FOO and a note that it should be merged into
corresponding file to be able to compile the kernel
- Changed kernel configuration example with the driver: it is not produced by
copying Generic but by including it
- Changed from automatic module building to asking an user if it whants to

Reviewed by:    julian@
 2006-08-06 11:06:35 +00:00
Roman Kurakin
a299217f8f Fix compilation. 
Reviewed by:	julian@
 2006-08-06 11:04:22 +00:00