The flag specifies that the block which uses FPU must be executed in
critical section, i.e. take no context switches, and does not need an
FPU save area during the execution.
It is intended to be applied around fast and short code pathes where
save area allocation is impossible or undesirable, due to context or
due to the relative cost of calculation vs. allocation.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Rename registers as in the manual.
Do a hard reset of the controller before a soft one.
Since DMA is always used remove dependancy on allwinner_soc_family, it was used
to differentiate SoC as the fdt compatible string were the same.
Tested on A10, A20, H3 and A64.
Reviewed by: jmcneill
Differential Revision: https://reviews.freebsd.org/D6868
Move PMAP_TS_REFERENCED_MAX out of the various pmap implementations and
into vm/pmap.h, and describe what its purpose is. Eliminate the archaic
"XXX" comment about its value. I don't believe that its exact value, e.g.,
5 versus 6, matters.
Update the arm64 and riscv pmap implementations of pmap_ts_referenced()
to opportunistically update the page's dirty field.
On amd64, use the PDE value already cached in a local variable rather than
dereferencing a pointer again and again.
Reviewed by: kib, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D7836
An array of bucket locks is added.
All modifications still require the global cache_lock to be held for
writing. However, most readers only need the relevant bucket lock and in
effect can run concurrently to the writer as long as they use a
different lock. See the added comment for more details.
This is an intermediate step towards removal of the global lock.
Reviewed by: kib
Tested by: pho
Our shim for Solaris random_get_bytes() uses read_random(), that looks
reasonable, since it guaranties reliably seeded random data. On the other
side Solaris random_get_pseudo_bytes() does not provide this guarantie,
and its original Solaris implementation is equivalent to our arc4rand(),
using software crypto without stressing slower hardware RNG.
If wait4() or wait6() return 0 because of WNOHANG, the status, rusage and
wrusage information should not be returned.
PR: 212048
Reported by: Casey Lucas
MFC after: 2 weeks
that the latter can easily determine what the trap type actually is
after callers are fixed to encode the type unambigously.
ddb currently barely understands breakpoints, and it treats all
non-breakpoints as single-step traps. This works OK for stopping
after every instruction when single-stepping, but is broken for
single-stepping with a count > 1 (especially with a large count).
ddb needs to stop on the first non-single-step trap while single-
stepping. Otherwise, ddb doesn't even stop the first time for
fatal traps and external breakpoints like the one in kdb_enter().
The lower vnode is already referenced and nodeget is supposed to consume
the reference. Thus the extra vref call was causing a leak.
Reported by: pho
Reviewed by: kib
MFC after: 1 week
Trying to build a MIPS platform that uses INTRNG needs this
for this to work right in gpiobusvar.h :
#ifdef INTRNG
struct intr_map_data_gpio {
struct intr_map_data hdr;
...
};
#endif
* change the HT_RC_2_MCS to do MCS0..23
* Use it when looking up the ht20/ht40 array for bits-per-symbol
* add a clk_to_psec (picoseconds) routine, so we can get sub-microsecond
accuracy for the math
* .. and make that + clk_to_usec public, so higher layer code that is
returning clocks (eg the ANI diag routines, some upcoming locationing
experiments) can be converted to microseconds.
Whilst here, add a comment in ar5416 so i or someone else can revisit the
latency values.
On big endian hardware that uses 1 byte bool a type mismatch of bool vs int will
cause the least signifcant byte of db_cmd_loop_done to be set, but the MSB to be
read, and read as 0. This causes ddb to stay in an infinite loop.
MFC after: 1 week
Split the QUEUE_MACRO_DEBUG into QUEUE_MACRO_DEBUG_TRACE and
QUEUE_MACRO_DEBUG_TRASH.
Add the debug macrso QMD_IS_TRASHED() and QMD_SLIST_CHECK_PREVPTR().
Document these in queue.3.
Reviewed by: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D3984
mounts in almost all cases instead of in most cases. Don't override
DOINGASYNC() by any condition except IO_SYNC.
Fix previous sprinking of DOINGASYNC() checks. Don't override IO_SYNC
by DOINGASYNC(). In ffs_write() and ffs_extwrite(), there were
intentional overrides that just broke O_SYNC of data. In
ffs_truncate(), there are 5 calls to ffs_update(), 4 with
apparently-unintentional overrides and 1 without; this had no effect
due to the main async mount hack descibed below.
Fix 1 place in ffs_truncate() where the caller's IO_ASYNC was overridden
for the soft updates case too (to do a delayed write instead of a sync
write). This is supposed to be the only change that affects anything
except async mounts.
In ffs_update(), remove the 19 year old efficiency hack of ignoring
the waitfor flag for async mounts, so that fsync() almost works for
async mounts. All callers are supposed to be fixed to not ask for a
sync update unless they are for fsync() or [I]O_SYNC operations.
fsync() now almost works for async mounts. It used to sync the data
but not the most important metdata (the inode). It still doesn't sync
associated directories.
This gave 10-20% fewer writes for my makeworld benchmark with async
mounted tmp and obj directories from an already small number.
Style fixes:
- in ffs_balloc.c, remove rotted quadruplicated comments about the
simplest part of the DOING*() decisions and rearrange the nearly-
quadruplicated code to be more nearly so.
- in ufs_vnops.c, use a consistent style with less negative logic and
no manual "optimization" of || to | in DOING*() expressions.
Reviewed by: kib (previous version)
This will be required for SMP support on MIPS Malta platform.
Reviewed by: adrian
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D7835
In vm86.c, fix 2 (rarely used) cases where the return code lost the
single-step indicator. While here, fix 2 misspellings of PSL_T as
PSL_TF (TF is the CPU manufacturer's spelling, but we use T).
In trap.c, turn T_PROTFLT and T_STKFLT into T_TRCTRAP if
vm86_emulate() asked for this (it does this when the instruction is
being traced and was successully emulated). In the kernel case, we
used to deliver the trap as SIGTRAP to the process, where it always
terminated the process; now we deliver the trap as T_TRCTRAP to kdb,
where it normally gives single-stepping. In the user case, the only
difference is that we now clear PSL_T and initialize ucode properly.
Reviewed by: kib
Some statuses, such as "ATA pass through information available", are part
part of absolutely normal operation and do not worth reporting.
MFC after: 2 weeks
truncation failed.
Doing so resulted in inconsistent state of the ufs dirhash with regard
to the actual directory inode state, and could lead to spurious ENOENT
errors for lookups of existing files in production kernels, or
assertion failures in the debugging kernels.
Change the logic of calling ufsdirhash_dirtrunc() to be same as in
ufs_direnter(). Execute UFS_TRUNCATE() first, log error, and only do
dirtrunc() if UFS_TRUNCATE() succeeded.
Note that the problem was exacerbated by the bug in the
flush_newblk_dep() function (see r305599), which caused in the spurios
errors from ffs_sync() and then ffs_truncate().
In collaboration with: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The buffer lock is retried on failed LK_SLEEPFAIL attempt, and error
from the failed attempt is irrelevant. But since there is path after
retry which does not clear error, it is possible to return spurious
error from the function.
The issue resulted in a spurious failure of softdep_sync_buf(),
causing further spurious failure of ffs_sync().
In collaboration with: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This change is formally not needed, since i_endoff not used in all
code paths after the call to ufs_direnter(), and i_endoff is
recalculated by the next lookup. But having the value correct makes
the reasoning about code simpler.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
cleared since nothing prevents completion of the parallel quotaoff.
There is nothing to sync in this case, and no reason to panic.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
operations. Instead of upgrading, assert that the lock is exclusive.
Explain the cause in comments.
This effectively reverts r209367.
Tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
going to re-read inodes.
Secondary write initiators, e.g. ufs_inactive(), might need to start a
write while owning the vnode lock. Since the suspended state
established by /dev/ufssuspend prevents them from entering
vn_start_secondary_write(), we get deadlock otherwise.
Note that it is arguably not very useful to re-read inodes after
/dev/ufssuspend suspension, because the suspension does not block
readers, and other threads might read existing files in parallel with
suspension owner (for now, only growfs(8)) operations. This
effectively means that suspension owner cannot safely modify existing
inodes, and then there is no sense in re-reading. But keep the code
enabled for now.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
