Commit Graph

101 Commits

Author SHA1 Message Date
David C Somayajulu
7a1297c821 1. state checks in bxe_tx_mq_start_locked() and bxe_tx_mq_start() to sync threads during interface down or detach.
2. add sysctl to set pause frame parameters
3. increase max segs for TSO packets to BXE_TSO_MAX_SEGMENTS (32)
4. add debug messages for PHY
5. HW LRO support restricted to FreeBSD versions 8.x and above.

Submitted by:Vaishali.Kulkarni@cavium.com
MFC after:5 days
2017-02-27 23:38:51 +00:00
Roger Pau Monné
f33f887e94 bxe: enable usage with NetXtreme II BCM57840 2x20GbE chip
Current bxe probe function won't attach to devices with the NetXtreme II
BCM57840 2x20GbE chip, enable it by adding it's chip ID to the list of
supported chips.

Tested on:		HP ProLiant WS460c Gen9
Reviewed by:		gnn
MFC after:		1 week
Sponsored by:		Citrix Systems R&D
Differential Revision:	https://reviews.freebsd.org/D9609
2017-02-15 14:34:40 +00:00
Sean Bruno
4f3a4c0163 r266979 missed a call to enable capabilities of the hw leading to an
inability to enable features of the device.

PR:             213845
Submitted by:   pherman@frenchfries.net
MFC after:      1 week
2016-11-05 16:17:07 +00:00
Bryan Drewery
1648616981 Use proper if_getdrvflags() API.
This is a NOP.

Sponsored by:	Dell EMC Isilon
2016-10-25 03:55:56 +00:00
David C Somayajulu
c7873d969c 1. Use taskqueue_create() instead of taskqueue_create_fast() for both
fastpath and slowpath taskqueues.
2. Service all transmits in taskqueue threads.
3. additional stats counters for  keeping track of
	- bd availability
	- tx buf ring not emptied in the fp task queue.
	  These are drained via timeout taskqueue.
	- tx attempts during link down.

MFC after: 5 days
2016-10-18 21:33:57 +00:00
David C Somayajulu
106961b640 Revert commit
r306284 - Fixes for issues under high workloads

Will fix and recommit patch
2016-09-30 18:08:16 +00:00
David C Somayajulu
678b8d82ee Fixes for issues under high workloads
MFC after:5 days
2016-09-23 23:18:54 +00:00
Pedro F. Giffuni
f0be707d74 sys/dev: replace comma with semicolon when pertinent.
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.

Detected with devel/coccinelle following a hint from DragonFlyBSD.

MFC after:	1 month
2016-08-09 19:41:46 +00:00
Ryan Stone
f57637a47b Don't enqueue NULL on a drbr
In one corner case in the bxe TX path, a NULL mbuf could be enqueued onto
a drbr queue.  This could case a KASSERT to fire with INVARIANTS enabled,
or the processing of packets from the queue to be prematurely ended later
on.

Submitted by:	Matt Joras (matt.joras AT isilon.com)
Reviewed by:	davidcs
MFC after:	3 days
Sponsored by:	EMC / Isilon Storage Division
Differential Revision:	https://reviews.freebsd.org/D7041
2016-08-08 16:19:24 +00:00
Eitan Adler
cef367e6a1 Don't repeat the the word 'the'
(one manual change to fix grammar)

Confirmed With: db
Approved by: secteam (not really, but this is a comment typo fix)
2016-05-17 12:52:31 +00:00
Scott Long
dde1276e8e Don't jam the softc in the device_probe routine. The softc isn't owned by
the driver here, so it shouldn't be accessed, let alone written to.  Remove
the nearby debug line, it's the only thing that depended on the softc, and
it depended on it in a way that couldn't work in this part of the code.

This fixes some reports of use-after-free and system instability with
DEBUG_MEMGUARD enabled.

Submitted by:	Matthew Macy
MFC after:	3 days
2016-05-13 05:57:21 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
David C Somayajulu
05c6aa727f 1. Removed -Wno-shift-negative-value from Makefile
2. Fixed warning its absence caused in bxe_elink.c

MFC after:5 days
2016-04-25 18:55:01 +00:00
David C Somayajulu
e5baa39aec Remove Unused/Dead Code
MFC after:5 days
2016-04-23 01:22:12 +00:00
David C Somayajulu
6f39c760f8 1. modify fwdump (a.k.a grcdump) so that grcdump memory is allocated
and freed on as needed basis.
2. grcdump can be taken at failure points by invoking bxe_grc_dump()
   when trigger_grcdump sysctl flag is set. When grcdump is taken
   grcdump_done sysctl flag is set.
3. grcdump_done can be monitored by the user to retrieve the grcdump.

Submitted by:vaishali.kulkarni@qlogic.com
2016-04-19 20:28:30 +00:00
David C Somayajulu
3e8a5445e5 reversed commits r297916 r297909 r297898 due to i386 build failures.
MFC after:5 days
2016-04-13 13:14:18 +00:00
David C Somayajulu
9f4d1b488f Fix compilation error on i386 2016-04-13 11:24:24 +00:00
David C Somayajulu
9bca1d24f4 Fix build failure on i386. Need to typecast a bunch of variables to (uintmax_t)
MFC after:5 days
2016-04-13 04:13:36 +00:00
David C Somayajulu
6dbd80fa74 1. modify fwdump (a.k.a grcdump) memory is allocated and freed on as needed
basis.
2. grcdump can be taken at failure points by invoking bxe_grc_dump() when
   trigger_grcdump sysctl flag is set. When grcdump is taken grcdump_done
   sysctl flag is set.
3. grcdump_done can be monitored by the user to retrieve the grcdump.

Submitted by:vaishali.kulkarni@qlogic.com
Approved by:davidcs@freebsd.org
MFC after:5 days
2016-04-13 00:53:04 +00:00
David C Somayajulu
6ba5a1d9ee Add support for Flash Update
Submitted by:nrapendra.singh@qlogic.com;vaishali.kulkarni@qlogic.com;davidcs@freebsd.org
Approved by:davidcs@freebsd.org
MFC after:5 days
2016-04-12 22:31:48 +00:00
David C Somayajulu
b1d4590283 1. Process tx completions in bxe_periodic_callout_func() and restart
transmissions if possible.
2. For SIOCSIFFLAGS call bxe_init_locked() only if !BXE_STATE_DISABLED
3. remove code not needed in bxe_init_internal_common()

Submitted by:vaishali.kulkarni@qlogic.com;venkata.bhavaraju@qlogic.com
Approved by:davidcs@freebsd.org
MFC after:5 days
2016-04-12 21:00:38 +00:00
Pedro F. Giffuni
74b8d63dcc Cleanup unnecessary semicolons from the kernel.
Found with devel/coccinelle.
2016-04-10 23:07:00 +00:00
David C Somayajulu
32020557a6 Modifications to achieve a common source base from FreeBSD7.x thru 10.x
MFC after:5 days
2016-03-21 18:48:20 +00:00
Justin Hibbits
da1b038af9 Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit.  This extends rman's resources to uintmax_t.  With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t?  Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures.  64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead.  That being said, uintmax_t was chosen for source
clarity.  If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros.  Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros.  Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes:	Yes
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
David C Somayajulu
988f26f9ff Fix code so that buf_ring allocation for Tx Queues and their mutexes
is done during during bxe_attach() and freed during bxe_detach()

MFC after: 5 days
2016-03-09 21:12:26 +00:00
John Baldwin
cbc4d2db75 Remove taskqueue_enqueue_fast().
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167.  It has been a compat shim ever
since.  It's time for the compat shim to go.

Submitted by:	Howard Su <howard0su@gmail.com>
Reviewed by:	sephe
Differential Revision:	https://reviews.freebsd.org/D5131
2016-03-01 17:47:32 +00:00
David C Somayajulu
4ef8ebfd62 Upgrade the firmware carried in driver and loaded during hardware
initialization (a.k.a STORM firmware) to version 7.13.1 (latest version)
2016-02-25 22:44:00 +00:00
David C Somayajulu
bb329d4b5a Remove dead code. Code Cleanup. Improve clarity in debug messages
MFC after:5 days
2016-02-19 22:46:52 +00:00
David C Somayajulu
34b133bcd5 Modified the use of bxe_grc_dump() function so that it can be invoked directly at any potential error path, where a fwdump is needed. The fwdump (a.k.a grcdump) is stored in a driver buffer. The sysctl grcdump_done indicates if a fwdump was taken and waiting to be retrieved.
The sysctl trigger_grcdump can be used to manually trigger a fwdump.

MFC after:5 days
2016-02-19 21:32:49 +00:00
David C Somayajulu
29e6019890 Add support for firmware dump (a.k.a grcdump)
MFC after:5 days
2015-12-23 03:19:12 +00:00
David C Somayajulu
6dbbc5f655 Check for packet_length is greater than 60 bytes as well as packet_length is
greater than len_on_bd, before invoking the routine to handle jumbo over SGL
(bxe_service_rxsgl()).
Add counters for number of jumbo_over_SGL packets (rx_bxe_service_rxsgl) and
erroneous jumbo_over_SGL packets (rx_erroneous_jumbo_sge_pkts)

Fix formatting in bxe_sysctl_state()

MFC after:5 days
2015-12-23 01:31:32 +00:00
David C Somayajulu
56c55e6513 Add support for reading device temperature
MFC after:5 days
2015-10-12 20:21:17 +00:00
Dimitry Andric
5bf328b6f4 Avoid left-shifting negative signed values in bxe(4).
Reviewed by:	davidcs
MFC after:	3 days
2015-08-13 18:24:41 +00:00
David C Somayajulu
ab97207add - Avoid lock contention in the if_transmit callback by using trylock and
enqueueing the frames when it fails. This way there is some latency
 removed from the transmitting path.
- If IFF_DRV_OACTIVE is set (and also if IFF_DRV_RUNNING is not) just
 enqueue the desired frames and return successful transmit. This way we
 avoid to return errors on transmit side and resulting in
 possible out-of-order frames. Please note that IFF_DRV_OACTIVE is set
 everytime we get the threshold ring hit, so this can be happening quite
 often.

Submitted by:	Attilio.Rao@isilon.com
MFC after:5 days
2015-07-28 19:15:44 +00:00
David C Somayajulu
c197bf4fe1 tx_mtx should be grabbed before calling buf_ring_dequeue_sc()
Submitted by:Attilio.Rao@isilon.com
MFC after:5 days
2015-06-23 20:09:52 +00:00
David C Somayajulu
284d94cfc8 Simplified implementation of bxe_set_mc_list()
removed bxe_free_mcast_macs_list() and bxe_init_mcast_macs_list()
fixed bug where copy of multicast list mta was deleted prior to passing the list to firmware

MFC after:5 days
2015-06-20 22:24:44 +00:00
David C Somayajulu
9987f30536 In bxe_init_mcast_macs_list(): mc_mac->mac needs to point to the multicast mac address
In bxe_set_mc_list(): added missing BXE_MCAST_UNLOCK()
In __ecore_vlan_mac_h_exec_pending(): need to check for ECORE_PENDING

Submitted by:gary.zambrano@qlogic.com
2015-06-16 21:11:32 +00:00
David C Somayajulu
04e9541d02 PHY LOCK acquires the hardware lock via bxe_acquire_phy_lock() and releases it via bxe_release_phy_lock(). It was simply acquiring a mutex earlier which can cause the PHY to use bogus values. Fixes intermittent link failures.
bxe_ioctl() completes all functions within its context as opposed to a taskqueue earlier.

bxe_handle_rx_mode_tq() no longer required. bxe_set_rx_mode() handles the functionality within its context

Submitted by:gary.zambrano@qlogic.com
MFC after:5 days
2015-06-13 01:28:19 +00:00
David C Somayajulu
bfdeba0cb3 Add stat counters for Jumbo Frames using SGE ring.
Also remove the checks for IFCAP_LRO in bxe_alloc_fp_buffers() and bxe_pf_rx_q_prep() since both TPA and Jumbo can use SGE ring.

Submitted by:gary.zambrano@qlogic.com
Approved by:davidcs@freebsd.org
MFC after:5 days
2015-05-22 01:44:07 +00:00
David C Somayajulu
3d60b1448f Limit the size of the posted receive buffers in Rx Rings to MJUMPAGESIZE. Previously for jumbo MTUs, the rx ring buffers were
MTU + any required pad. Now when this size greater than MJUMPAGESIZE, the packet is spanned across multiple buffers and the
mbufs are stiched together.

Submitted by:gary.zambrano@qlogic.com
Approved by:davidcs@freebsd.org
2015-05-21 20:47:19 +00:00
Craig Rodrigues
d9db52256e Move zlib.c from net to libkern.
It is not network-specific code and would
be better as part of libkern instead.
Move zlib.h and zutil.h from net/ to sys/
Update includes to use sys/zlib.h and sys/zutil.h instead of net/

Submitted by:		Steve Kiernan stevek@juniper.net
Obtained from:		Juniper Networks, Inc.
GitHub Pull Request:	https://github.com/freebsd/freebsd/pull/28
Relnotes:		yes
2015-04-22 14:38:58 +00:00
David C Somayajulu
16a38a930d When an mbuf allocation fails in the receive path, the mbuf containing the received packet is not sent to the host net
work stack and is reused again on the receive ring.  Remaining received packets in the ring are not processed in that
invocation of bxe_rxeof() and defered to the task thread.

MFC after: 5 days
2015-04-02 21:55:03 +00:00
Hans Petter Selasky
c25290420e Start process of removing the use of the deprecated "M_FLOWID" flag
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.

This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.

"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.

Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.

MFC after:	1 month
Sponsored by:	Mellanox Technologies
2014-12-01 11:45:24 +00:00
Hans Petter Selasky
f0188618f2 Fix multiple incorrect SYSCTL arguments in the kernel:
- Wrong integer type was specified.

- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.

- Logical OR where binary OR was expected.

- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.

- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.

- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.

- Updated "EXAMPLES" section in SYSCTL manual page.

MFC after:	3 days
Sponsored by:	Mellanox Technologies
2014-10-21 07:31:21 +00:00
Gleb Smirnoff
df3601781d - Use if_inc_counter() to increment various counters.
- Do not ever set a counter to a value. For those counters
  that we don't increment, but return directly from hardware
  create cases in if_get_counter() method.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-09-18 15:56:14 +00:00
David C Somayajulu
41b18fab96 For ECORE_DBG_BREAK_IF() ECORE_BUG() ECORE_BUG_ON() check bxe_debug flag before
printing error message.

MFC after:5 days
2014-09-17 22:49:29 +00:00
Gleb Smirnoff
09a8241fc9 It is actually possible to have if_t a typedef to non-void type,
and keep both converted to drvapi and non-converted drivers
compilable.

o Make if_t typedef to struct ifnet *.
o Remove shim functions.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-08-31 12:48:13 +00:00
Xin LI
cd01c7a84f Fix build by using the driver API (driver converted in r266979 which should
be upstreamed).

X-MFC with:	r268854
MFC after:	5 days
2014-07-18 21:28:59 +00:00
David C Somayajulu
e3a36fb018 Initiate error recovery stats fail to update after 3 retries.
Change bxe_panic() ECORE_DBG_BREAK_IF() ECORE_BUG() ECORE_BUG_ON() to
panic only if ECORE_STOP_ON_ERROR is defined.

MFC after:5 days
2014-07-18 20:04:11 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00