the reply to ReaddirPlus when the server failed within the loop
that calls VFS_VGET(). This failure is most likely an error
return from VFS_VGET() caused by a bogus d_fileno that was
truncated to 32bits.
This patch fixes the server so that it will return directory postop
attributes for the failure. It does not fix the underlying issue caused
by d_fileno being uint32_t when a file system like ZFS generates
a fileno that is greater than 32bits.
Reported by: jpaetzel
Reviewed by: jpaetzel
MFC after: 1 month
into head. The code is not believed to have any effect
on the semantics of non-NFSv4.1 server behaviour.
It is a rather large merge, but I am hoping that there will
not be any regressions for the NFS server.
MFC after: 1 month
UFS rather than for all but ZFS. This code was assuming that offsets were
monotonically increasing for all file systems except ZFS and that the
cookies from a previous call may have been rewound to a block boundary.
According to mckusick@ only UFS is known to do this, so only requests against
UFS file systems should remove cookies smaller than the given offset. This
fixes serving TMPFS over NFS as it too does not have monotonically increasing
offsets. The comment around the code also indicated it was specific to UFS.
Some of the code using 'not_zfs' is specific to ZFS snapshot handling, so
add a 'is_zfs' variable for those cases.
It's possible that 'is_zfs' check for VFS_VGET() support may not be
specific to ZFS. This needs more research and testing.
After this fix TMPFS and other file systems can be served over NFS.
To test I compared the results of syncing a /usr/src tree into a tmpfs and
serving that over NFS. Before the fix 3589 files were missing on the remote
view. After the fix all files were successfully found.
Reviewed by: rmacklem
Discussed with: mckusick, rmacklem via fs@
Discussed at: http://lists.freebsd.org/pipermail/freebsd-fs/2014-April/019264.html
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
when a newly created file has another open done on it that
update the open mode. This patch moves the code that updates
the open mode up into the block where the mutex is held to
ensure this cannot happen. No bug caused by this potential
race has been observed, but this fix is a safety belt to ensure
it cannot happen.
MFC after: 2 weeks
permissions test, forgotten in r164033.
Refactor the permission checks for utimes(2) into vnode helper
function vn_utimes_perm(9), and simplify its code comparing with the
UFS origin, by writing the call to VOP_ACCESSX only once. Use the
helper for UFS(5), tmpfs(5), devfs(5) and msdosfs(5).
Reported by: bde
Reviewed by: bde, trasz
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
created to a symlink. This restriction (which was
inherited from OpenBSD) is not required by the NFS RFCs.
Since this is allowed by the old NFS server, it is a
POLA violation to not allow it. This patch modifies the
new NFS server to allow this.
Reported by: jhb
Reviewed by: jhb
MFC after: 3 days
The CUSE library is a wrapper for the devfs kernel functionality which
is exposed through /dev/cuse . In order to function the CUSE kernel
code must either be enabled in the kernel configuration file or loaded
separately as a module. Currently none of the committed items are
connected to the default builds, except for installing the needed
header files. The CUSE code will be connected to the default world and
kernel builds in a follow-up commit.
The CUSE module was written by Hans Petter Selasky, somewhat inspired
by similar functionality found in FUSE. The CUSE library can be used
for many purposes. Currently CUSE is used when running Linux kernel
drivers in user-space, which need to create a character device node to
communicate with its applications. CUSE has full support for almost
all devfs functionality found in the kernel:
- kevents
- read
- write
- ioctl
- poll
- open
- close
- mmap
- private per file handle data
Requested by several people. Also see "multimedia/cuse4bsd-kmod" in
ports.
disk. That has a side effect of corrupting the "." entries names on
rename, since the call to createde() in the msdosfs_rename() sets the
de_Name to the target name. If any change to the directory attributes
is performed, the wrong name is written back to the on-disk direntry
on update.
Overwrite the de_Name for the directories on rename to correct the dot
name.
Submitted by: bde
MFC after: 1 week
should either accept owner and owner_group strings that are just
the digits of the uid/gid or return NFS4ERR_BADOWNER.
This patch adds a sysctl vfs.nfsd.enable_stringtouid, which can
be set to enable the server w.r.t. accepting numeric string. It
also ensures that NFS4ERR_BADOWNER is returned if numeric uid/gid
strings are not enabled. This fixes the server for recent Linux
nfs4 clients that use numeric uid/gid strings by default.
Reported and tested by: craigyk@gmail.com
MFC after: 2 weeks
It can fail if pipe map is exhausted (as a result of too many pipes created),
but it is not fatal and could be provoked by unprivileged users. The only
consequence is worse performance with given pipe.
Reported by: ivoras
Suggested by: kib
MFC after: 1 week
for the VOP_READ() call. This patch fixes both the old and new
server for this case.
PR: 185232
Submitted by: PR had patch for old server
Reviewed by: kib
MFC after: 2 weeks
This simplifies the code and should avoid the clang sparc
port from generating an abort() call.
Requested by: rdivacky
Submitted by: jhb
MFC after: 2 weeks
post-create/mkdir directory attributes. This allows the RPC to
name cache the newly created directory and reduces the lookup RPC
count for applications creating a lot of directories.
MFC after: 2 weeks
post-open/create directory attributes. This allows the RPC to
name cache the newly created file and reduces the lookup RPC
count by about 10% for software builds.
MFC after: 2 weeks
attributes. This allows the client to cache directory names
when they are looked up, reducing the Lookup RPC count by
about 40% for software builds.
MFC after: 2 weeks
worse when filling up a device and then trying to erase files to make
space. Without enough space, you can't do that. Also, ensure that the
metadata writes don't generate ENOSPC. They will be retried later
since the buffers are still dirty...
Submitted by: mjg@
When server doesn't support this request, try to use SMB_INFO_ALLOCATION.
And use SMB_COM_QUERY_INFORMATION_DISK request as fallback.
MFC after: 2 weeks
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
ext2fs: minor update to the dirpref policy.
The change in UFS r254996, reverted the change as the
older code seems to work better. This was not visible
in local testing but we can trust UFS is vastly more
exercised in diferent environments.
Bring in a minor change to the dirpref policy based on r248623.
This is pretty minimal change to keep the implementation in
sync with UFS but other parts from the original change are not
directly applicable so don't expect improvements in fsck times.
MFC after: 2 weeks
further refinement is required as some device drivers intended to be
portable over FreeBSD versions rely on __FreeBSD_version to decide whether
to include capability.h.
MFC after: 3 weeks
lookup cookies to be less obscure.
No functional change.
Since r245115, cnt has not really been needed in tmpfs_dir_getdents(). Keep
it for the MPASS() for now though.
Sponsored by: EMC / Isilon Storage Division
MFC after: 2 weeks
Consistently use a single tab after a #define as mentioned in style(9).
Use tabs instead of space for indenting.
Fix a typo: "hash_vesion".
No functional change.
MFC after: 3 days
The ext4 developers tend to tag Ext4-specific flags as
"incompatible" even when such features are not relevant for
read-only support. This is a consequence of the process
though which this filesystem is implemented without design
and the fact that some new features are not extensible to
ext2/3.
Organize the features according to what we support and sort
them so that we can now read-only mount filesystems with
some features that may be found in newly formatted ext4 fs.
Submitted by: Zheng Liu
Reviewed by: pfg
MFC after: 5 days
The ext4 inode flags do not have equivalents for chflags (1)
and hold information that is private to the implementation.
The i_flag field in the inode is a better place to hold the Ext4
inode flags as it saves us from masking flags while setting or
getting attributes. It should also make things cleaner if we
implement write support for Ext4.
Suggested by: bde
Tested by: Mike Ma
MFC after: 3 days
The IN_* flags should be set in i_flag instead of corrupting
i_flags [1].
Re-enable HTree dirindex as the last series of bug fixes
seems to have fixed the issues.
Reported by: bde [1]
Tested by: kevlo
MFC after: 1 week
Use the bitwise negation instead of bogus boolean negation and move
the flag manipulation with the assignment.
Fix some grammatical errors introduced in the same change.
Reported by: bde
MFC after: 3 days
r260545 cleared the inode flags to fix corruption problems but
we still need to pass some EXT4 flags for the ext4 read-only
mode. None of these attributes has an equivalent in FreeBSD and
are uninteresting for the system utilities so they should be
innaccessible in ext2_getattrib().
Note: we also use EXT4_HUGE_FILE but we use it directly from the
dinode structure so it is not necessary to translate it,
Suggested by: bde
MFC after: 3 days
After r252890 we are naively attempting to pass through the
inode flags. This is technically incorrect as the ext2
inode flags don't match the UFS/system values used in
FreeBSD and a clean conversion is needed.
Some filtering was left in place so the change didn't cause
significant changes in FreeBSD but some of the garbage passed
is likely to be the cause for warning messages in linux.
Fix the issue by resetting the flags before conversion as was
done previously. This also means we will not pass the EXT4_*
inode flags into FreeBSD's inode.
PR: kern/185448
MFC after: 3 days
- Introduce additional hash to group requests by hash of sockref. This
allows to process TCP acknowledgements without looping though all the cache,
and as result allows to do it every time.
- Indroduce additional callbacks to notify application layer about sockets
disconnection. Without this last few requests processed just before socket
disconnection never processed their ACKs and stuck in cache for many hours.
- Implement transport-specific method for tracking reply acknowledgements.
New implementation does not cross multiple stack layers to get the data and
does not have race conditions that previously made some requests stuck
in cache. This could be done more efficiently at sockbuf layer, but that
would broke some KBIs, while I don't know other consumers for it aside NFS.
- Instead of traversing all DRC twice per request, run cleaning only once
per request, and except in some conditions traverse only single hash slot
at a time.
Together this limits NFS DRC growth only to situations of real connectivity
problems. If network is working well, and so all replies are acknowledged,
cache remains almost empty even after hours of heavy load. Without this
change on the same test cache was growing to many thousand requests even
with perfectly working local network.
As another result this reduces CPU time spent on the DRC handling during
SPEC NFS benchmark from about 10% to 0.5%.
Sponsored by: iXsystems, Inc.
- Do not update the histogram for items we are any way deleting from cache.
- Do not update the histogram if nfsrc_tcphighwater is not set.
- Remove some extra math operations.
when a Getattr for a file is done by a client other than the one that
holds the file's delegation. This would only happen when delegations
are enabled and the problem is fixed by this patch.
MFC after: 1 week
reported to the freebsd-fs mailing list. I believe the problem was
caused by the Readdir operation using VFS_VGET() for a snapshot file entry
instead of VOP_LOOKUP(). This would not occur for NFSv3, since it
will do a VFS_VGET() of "." which fails with ENOTSUPP at the beginning
of the directory, whereas NFSv4 does not check "." or "..". This
patch adds a call to VFS_VGET() for the directory being read to check
for ENOTSUPP.
I also observed that the mount_on_fileid and fsid attributes were
not correct at the snapshot's auto mountpoints when looking at packet
traces for the Readdir. This patch fixes the attributes by doing a check
for different v_mount structure, even if the vnode v_mountedhere is not
set.
Reported by: jas@cse.yorku.ca
Tested by: jas@cse.yorku.ca
Reviewed by: asomers
MFC after: 1 week
