calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING.
When this happens, ndis_get_info() will sleep waiting for a completion
event. If two threads call ndis_get_info() and both end up having to
sleep, they will both end up waiting on the same wait channel, which
can cause a panic in sleepq_add() if INVARIANTS are turned on.
Fix this by having ndis_get_info() use a common mutex rather than
using the process mutex with PROC_LOCK(). Also do the same for
ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend()
use the new mutex, but ndis_thsuspend() shouldn't need this since
it will make each thread that calls it sleep on a unique wait channel.
Also, it occured to me that we probably don't want to enter
MiniportQueryInformation() or MiniportSetInformation() from more
than one thread at any given time, so now we acquire a Windows
spinlock before calling either of them. The Microsoft documentation
says that MiniportQueryInformation() and MiniportSetInformation()
are called at DISPATCH_LEVEL, and previously we would call
KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering
either routine, but this only guarantees mutual exclusion on
uniprocessor machines. To make it SMP safe, we need to use a real
spinlock. For now, I'm abusing the spinlock embedded in the
NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be
applied to some of the other routines in kern_ndis.c at a later date.)
Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c
since we need to use in in kern_ndis.c, and since it's technically part
of the Windows kernel DDK API along with the other spinlock routines. Use
it in subr_ndis.c too rather than frobbing the spinlock directly.
These normally only manifest if the ndis compat module is statically
compiled into a kernel image by way of 'options NDISAPI'.
Submitted by: Dmitri Nikulin
Approved by: wpaul
PR: kern/71449
MFC after: 1 week
This was tested with a Netgear WG311v2 802.11b/g PCI card. Things
that were fixed:
- This chip has two memory mapped regions, one at PCIR_BAR(0) and the
other at PCIR_BAR(1). This is a little different from the other
chips I've seen with two PCI shared memory regions, since they tend
to have the second BAR ad PCIR_BAR(2). if_ndis_pci.c tests explicitly
for PCIR_BAR(2). This has been changed to simply fill in ndis_res_mem
first and ndis_res_altmem second, if a second shared memory range
exists. Given that NDIS drivers seem to scan for BARs in ascending
order, I think this should be ok.
- Fixed the code that tries to process firmware images that have been
loaded as .ko files. To save a step, I was setting up the address
mapping in ndis_open_file(), but ndis_map_file() flags pre-existing
mappings as an error (to avoid duplicate mappings). Changed this so
that the mapping is now donw in ndis_map_file() as expected.
- Made the typedef for 'driver_entry' explicitly include __stdcall
to silence gcc warning in ndis_load_driver().
NOTE: the Texas Instruments ACX111 driver needs firmware. With my
card, there were 3 .bin files shipped with the driver. You must
either put these files in /compat/ndis or convert them with
ndiscvt -f and kldload them so the driver can use them. Without
the firmware image, the NIC won't work.
- In ntoskrnl_var.h, I had defined compat macros for
ntoskrnl_acquire_spinlock() and ntoskrnl_release_spinlock() but
never used them. This is fortunate since they were stale. Fix them
to work properly. (In Windows/x86 KeAcquireSpinLock() is a macro that
calls KefAcquireSpinLock(), which lives in HAL.dll. To imitate this,
ntoskrnl_acquire_spinlock() is just a macro that calls hal_lock(),
which lives in subr_hal.o.)
- Add macros for ntoskrnl_raise_irql() and ntoskrnl_lower_irql() that
call hal_raise_irql() and hal_lower_irql().
- Use these macros in kern_ndis.c, subr_ndis.c and subr_ntoskrnl.c.
- Along the way, I realised subr_ndis.c:ndis_lock() was not calling
hal_lock() correctly (it was using the FASTCALL2() wrapper when
in reality this routine is FASTCALL1()). Using the
ntoskrnl_acquire_spinlock() fixes this. Not sure if this actually
caused any bugs since hal_lock() would have just ignored what
was in %edx, but it was still bogus.
This hides many of the uses of the FASTCALLx() macros which makes the
code a little cleaner. Should not have any effect on generated object
code, other than the one fix in ndis_lock().
- Give ndiscvt(8) the ability to process a .SYS file directly into
a .o file so that we don't have to emit big messy char arrays into
the ndis_driver_data.h file. This behavior is currently optional, but
may become the default some day.
- Give ndiscvt(8) the ability to turn arbitrary files into .ko files
so that they can be pre-loaded or kldloaded. (Both this and the
previous change involve using objcopy(1)).
- Give NdisOpenFile() the ability to 'read' files out of kernel memory
that have been kldloaded or pre-loaded, and disallow the use of
the normal vn_open() file opening method during bootstrap (when no
filesystems have been mounted yet). Some people have reported that
kldloading if_ndis.ko works fine when the system is running multiuser
but causes a panic when the modile is pre-loaded by /boot/loader. This
happens with drivers that need to use NdisOpenFile() to access
external files (i.e. firmware images). NdisOpenFile() won't work
during kernel bootstrapping because no filesystems have been mounted.
To get around this, you can now do the following:
o Say you have a firmware file called firmware.img
o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko
o Put the firmware.img.ko in /boot/kernel
o add firmware.img_load="YES" in /boot/loader.conf
o add if_ndis_load="YES" and ndis_load="YES" as well
Now the loader will suck the additional file into memory as a .ko. The
phony .ko has two symbols in it: filename_start and filename_end, which
are generated by objcopy(1). ndis_open_file() will traverse each module
in the module list looking for these symbols and, if it finds them, it'll
use them to generate the file mapping address and length values that
the caller of NdisOpenFile() wants.
As a bonus, this will even work if the file has been statically linked
into the kernel itself, since the "kernel" module is searched too.
(ndiscvt(8) will generate both filename.o and filename.ko for you).
- Modify the mechanism used to provide make-pretend FASTCALL support.
Rather than using inline assembly to yank the first two arguments
out of %ecx and %edx, we now use the __regparm__(3) attribute (and
the __stdcall__ attribute) and use some macro magic to re-order
the arguments and provide dummy arguments as needed so that the
arguments passed in registers end up in the right place. Change
taken from DragonflyBSD version of the NDISulator.
actually work.
Make the PCI and PCCARD attachments provide a bus_get_resource_list()
method so that resource listing for PCCARD works. PCCARD does not
have a bus_get_resource_list() method (yet), so I faked up the
resource list management in if_ndis_pccard.c, and added
bus_get_resource_list() methods to both if_ndis_pccard.c and if_ndis_pci.c.
The one in the PCI attechment just hands off to the PCI bus code.
The difference is transparent to the NDIS resource handler code.
Fixed ndis_open_file() so that opening files which live on NFS
filesystems work: pass an actual ucred structure to VOP_GETATTR()
(NFS explodes if the ucred structure is NOCRED).
Make NdisMMapIoSpace() handle mapping of PCMCIA attribute memory
resources correctly.
Turn subr_ndis.c:my_strcasecmp() into ndis_strcasecmp() and export
it so that if_ndis_pccard.c can use it, and junk the other copy
of my_strcasecmp() from if_ndis_pccard.c.
- In subr_ndis.c:ndis_allocate_sharemem(), create the busdma tags
used for shared memory allocations with a lowaddr of 0x3E7FFFFF.
This forces the buffers to be mapped to physical/bus addresses within
the first 1GB of physical memory. It seems that at least one card
(Linksys Instant Wireless PCI V2.7) depends on this behavior. I
don't know if this is a hardware restriction, or if the NDIS
driver for this card is truncating the addresses itself, but using
physical/bus addresses beyong the 1GB limit causes initialization
failures.
- Create am NDIS_INITIALIZED() macro in if_ndisvar.h and use it in
if_ndis.c to test whether the device has been initialized rather
than checking for the presence of the IFF_UP flag in if_flags.
While debugging the previous problem, I noticed that bringing
up the device would always produce failures from ndis_setmulti().
It turns out that the following steps now occur during device
initialization:
- IFF_UP flag is set in if_flags
- ifp->if_ioctl() called with SIOCSIFADDR (which we don't handle)
- ifp->if_ioctl() called with SIOCADDMULTI
- ifp->if_ioctl() called with SIOCADDMULTI (again)
- ifp->if_ioctl() called with SIOCADDMULTI (yet again)
- ifp->if_ioctl() called with SIOCSIFFLAGS
Setting the receive filter and multicast filters can only be done
when the underlying NDIS driver has been initialized, which is done
by ifp->if_init(). However, we don't call ifp->if_init() until
ifp->if_ioctl() is called with SIOCSIFFLAGS and IFF_UP has been
set. It appears that now, the network stack tries to add multicast
addresses to interface's filter before those steps occur. Normally,
ndis_setmulti() would trap this condition by checking for the IFF_UP
flag, but the network code has in fact set this flag already, so
ndis_setmulti() is fooled into thinking the interface has been
initialized when it really hasn't.
It turns out this is usually harmless because the ifp->if_init()
routine (in this case ndis_init()) will set up the multicast
filter when it initializes the hardware anyway, and the underlying
routines (ndis_get_info()/ndis_set_info()) know that the driver/NIC
haven't been initialized yet, but you end up spurious error messages
on the console all the time.
Something tells me this new behavior isn't really correct. I think
the intention was to fix it so that ifp->if_init() is only called
once when we ifconfig an interface up, but the end result seems a
little bogus: the change of the IFF_UP flag should be propagated
down to the driver before calling any other ioctl() that might actually
require the hardware to be up and running.
make the key name matching case-insensitive. There are some drivers
and .inf files that have mismatched cases, e.g. the driver will look
for "AdhocBand" whereas the .inf file specifies a registry key to be
created called "AdHocBand." The mismatch is probably a typo that went
undetected (so much for QA), but since Windows seems to be case-insensitive,
we should be too.
In if_ndis.c, initialize rates and channels correctly so that specify
frequences correctly when trying to set channels in the 5Ghz band, and
so that 802.11b rates show up for some a/b/g cards (which otherwise
appear to have no 802.11b modes).
Also, when setting OID_802_11_CONFIGURATION in ndis_80211_setstate(),
provide default values for the beacon interval, ATIM window and dwelltime.
The Atheros "Aries" driver will crash if you try to select ad-hoc mode
and leave the beacon interval set to 0: it blindly uses this value and
does a division by 0 in the interrupt handler, causing an integer
divide trap.
- Use the dh_inserted member of the dispatch header in the Windows
timer structure to indicate that the timer has been "inserted into
the timer queue" (i.e. armed via timeout()). Use this as the value
to return to the caller in KeCancelTimer(). Previously, I was using
callout_pending(), but you can't use that with timeout()/untimeout()
without creating a potential race condition.
- Make ntoskrnl_init_timer() just a wrapper around ntoskrnl_init_timer_ex()
(reduces some code duplication).
- Drop Giant when entering if_ndis.c:ndis_tick() and
subr_ntorkrnl.c:ntoskrnl_timercall(). At the moment, I'm forced to
use system callwheel via timeout()/untimeout() to handle timers rather
than the callout API (struct callout is too big to fit inside the
Windows struct KTIMER, so I'm kind of hosed). Unfortunately, all
the callouts in the callwhere are not marked as MPSAFE, so when
one of them fires, it implicitly acquires Giant before invoking the
callback routine (and releases it when it returns). I don't need to
hold Giant, but there's no way to stop the callout code from acquiring
it as long as I'm using timeout()/untimeout(), so for now we cheat
by just dropping Giant right away (and re-acquiring it right before
the routine returns so keep the callout code happy). At some point,
I will need to solve this better, but for now this should be a suitable
workaround.
(I hope.)
My original instinct to make ndis_return_packet() asynchronous was correct.
Making ndis_rxeof() submit packets to the stack asynchronously fixes
one recursive spinlock acquisition, but it's also possible for it to
happen via the ndis_txeof() path too. So:
- In if_ndis.c, revert ndis_rxeof() to its old behavior (and don't bother
putting ndis_rxeof_serial() back since we don't need it anymore).
- In kern_ndis.c, make ndis_return_packet() submit the call to the
MiniportReturnPacket() function to the "ndis swi" thread so that
it always happens in another context no matter who calls it.
ntoskrnl_unlocl_dpc().
- hal_raise_irql(), hal_lower_irql() and hal_irql() didn't work right
on SMP (priority inheritance makes things... interesting). For now,
use only two states: DISPATCH_LEVEL (PI_REALTIME) and PASSIVE_LEVEL
(everything else). Tested on a dual PIII box.
- Use ndis_thsuspend() in ndis_sleep() instead of tsleep(). (I added
ndis_thsuspend() and ndis_thresume() to replace kthread_suspend()
and kthread_resume(); the former will preserve a thread's priority
when it wakes up, the latter will not.)
- Change use of tsleep() in ndis_stop_thread() to prevent priority
change on wakeup.
attempting to duplicate Windows spinlocks. Windows spinlocks differ
from FreeBSD spinlocks in the way they block preemption. FreeBSD
spinlocks use critical_enter(), which masks off _all_ interrupts.
This prevents any other threads from being scheduled, but it also
prevents ISRs from running. In Windows, preemption is achieved by
raising the processor IRQL to DISPATCH_LEVEL, which prevents other
threads from preempting you, but does _not_ prevent device ISRs
from running. (This is essentially what Solaris calls dispatcher
locks.) The Windows spinlock itself (kspin_lock) is just an integer
value which is atomically set when you acquire the lock and atomically
cleared when you release it.
FreeBSD doesn't have IRQ levels, so we have to cheat a little by
using thread priorities: normal thread priority is PASSIVE_LEVEL,
lowest interrupt thread priority is DISPATCH_LEVEL, highest thread
priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is
HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL
matter to us. The immediate benefit of all this is that I no
longer have to rely on a mutex pool.
Now, I'm sure many people will be seized by the urge to criticize
me for doing an end run around our own spinlock implementation, but
it makes more sense to do it this way. Well, it does to me anyway.
Overview of the changes:
- Properly implement hal_lock(), hal_unlock(), hal_irql(),
hal_raise_irql() and hal_lower_irql() so that they more closely
resemble their Windows counterparts. The IRQL is determined by
thread priority.
- Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do
in Windows, which is to atomically set/clear the lock value. These
routines are designed to be called from DISPATCH_LEVEL, and are
actually half of the work involved in acquiring/releasing spinlocks.
- Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers
that allow us to call a _fastcall function in spite of the fact
that our version of gcc doesn't support __attribute__((__fastcall__))
yet. The macros take 1, 2 or 3 arguments, respectively. We need
to call hal_lock(), hal_unlock() etc... ourselves, but can't really
invoke the function directly. I could have just made the underlying
functions native routines and put _fastcall wrappers around them for
the benefit of Windows binaries, but that would create needless bloat.
- Remove ndis_mtxpool and all references to it. We don't need it
anymore.
- Re-implement the NdisSpinLock routines so that they use hal_lock()
and friends like they do in Windows.
- Use the new spinlock methods for handling lookaside lists and
linked list updates in place of the mutex locks that were there
before.
- Remove mutex locking from ndis_isr() and ndis_intrhand() since they're
already called with ndis_intrmtx held in if_ndis.c.
- Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif.
It turns out there are some drivers which stupidly free the memory
in which their spinlocks reside before calling ndis_destroy_lock()
on them (touch-after-free bug). The ADMtek wireless driver
is guilty of this faux pas. (Why this doesn't clobber Windows I
have no idea.)
- Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into
real functions instead of aliasing them to NdisAcaquireSpinLock()
and NdisReleaseSpinLock(). The Dpr routines use
KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(),
which acquires the lock without twiddling the IRQL.
- In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some
drivers may call the status/status done callbacks as the result of
setting an OID: ndis_80211_getstate() gets OIDs, which means we
might cause the driver to recursively access some of its internal
structures unexpectedly. The ndis_ticktask() routine will call
ndis_80211_getstate() for us eventually anyway.
- Fix the channel setting code a little in ndis_80211_setstate(),
and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft
spec says you're not supposed to twiddle the channel in BSS mode;
I may need to enforce this later.) This fixes the problems I was
having with the ADMtek adm8211 driver: we were setting the channel
to a non-standard default, which would cause it to fail to associate
in BSS mode.
- Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when
calling certain miniport routines, per the Microsoft documentation.
I think that's everything. Hopefully, other than fixing the ADMtek
driver, there should be no apparent change in behavior.
before calling BUS_GET_RESOURCE_LIST(). Previously, the list head would
only be initialized if BUS_GET_RESOURCE_LIST() succeeded; it needs to
be initialized unconditionally so that the list cleanup code won't
trip over potential stack garbage.
case we should wait for the resetdone handler to be called before
returning.
- When providing resources via ndis_query_resources(), uses the
computed rsclen when using bcopy() to copy out the resource data
rather than the caller-supplied buffer length.
- Avoid using ndis_reset_nic() in if_ndis.c unless we really need
to reset the NIC because of a problem.
- Allow interrupts to be fielded during ndis_attach(), at least
as far as allowing ndis_isr() and ndis_intrhand() to run.
- Use ndis_80211_rates_ex when probing for supported rates. Technically,
this isn't supposed to work since, although Microsoft added the extended
rate structure with the NDIS 5.1 update, the spec still says that
the OID_802_11_SUPPORTED_RATES OID uses ndis_80211_rates. In spite of
this, it appears some drivers use it anyway.
- When adding in our guessed rates, check to see if they already exist
so that we avoid any duplicates.
- Add a printf() to ndis_open_file() that alerts the user when a
driver attempts to open a file under /compat/ndis.
With these changes, I can get the driver for the SMC 2802W 54g PCI
card to load and run. This board uses a Prism54G chip. Note that in
order for this driver to work, you must place the supplied smc2802w.arm
firmware image under /compat/ndis. (The firmware is not resident on
the device.)
Note that this should also allow the 3Com 3CRWE154G72 card to work
as well; as far as I can tell, these cards also use a Prism54G chip.
resource_var.h.
In kern_ndis.c:ndis_convert_res(), fill in the cprd_flags and
cprd_sharedisp fields as best we can.
In if_ndis.c:ndis_setmulti(), don't bother updating the multicast
filter if our multicast address list is empty.
Add some missing updates to ndis_var.h and ntoskrnl_var.h that I
forgot to check in when I added the KeDpc stuff.
objects rather than synchronization objects. When a sync object is
signaled, only the first thread waiting on it is woken up, and then
it's automatically reset to the not-signaled state. When a
notification object is signaled, all threads waiting on it will
be woken up, and it remains in the signaled state until someone
resets it manually. We want the latter behavior for NDIS events.
- In kern_ndis.c:ndis_convert_res(), we have to create a temporary
copy of the list returned by BUS_GET_RESOURCE_LIST(). When the PCI
bus code probes resources for a given device, it enters them into
a singly linked list, head first. The result is that traversing
this list gives you the resources in reverse order. This means when
we create the Windows resource list, it will be in reverse order too.
Unfortunately, this can hose drivers for devices with multiple I/O
ranges of the same type, like, say, two memory mapped I/O regions (one
for registers, one to map the NVRAM/bootrom/whatever). Some drivers
test the range size to figure out which region is which, but others
just assume that the resources will be listed in ascending order from
lowest numbered BAR to highest. Reversing the order means such drivers
will choose the wrong resource as their I/O register range.
Since we can't traverse the resource SLIST backwards, we have to
make a temporary copy of the list in the right order and then build
the Windows resource list from that. I suppose we could just fix
the PCI bus code to use a TAILQ instead, but then I'd have to track
down all the consumers of the BUS_GET_RESOURCE_LIST() and fix them
too.
which pulls a job off a thread work queue (assuming it hasn't run yet).
This is needed for KeRemoveQueueDpc().
- In subr_ntoskrnl.c, implement KeInsertQueueDpc() and KeRemoveQueueDpc(),
to go with KeInitializeDpc() to round out the API. Also change the
KeTimer implementation to use this API instead of the private
timer callout scheduler. Functionality of the timer API remains
unchanged, but we get a couple new Windows kernel API routines and
more closely imitate the way thing works in Windows. (As of yet
I haven't encountered any drivers that use KeInsertQueueDpc() or
KeRemoveQueueDpc(), but it doesn't hurt to have them.)
when it associates with a net. Because FreeBSD's kstack size is only
2 pages by default, this blows the stack and causes a double fault.
To deal with this, we now create all our kthreads with 8 stack pages.
Also, we now run all timer callouts in the ndis swi thread (since
they would otherwise run in the clock ithread, whose stack is too
small). It happens that the alloca() in this case was occuring within
the interrupt handler, which was already running in the ndis swi
thread, but I want to deal with the callouts too just to be extra
safe.
NOTE: this will only work if you update vm_machdep.c with the change
I just committed. If you don't include this fix, setting the number
of stack pages with kthread_create() has essentially no effect.
are actually layered on top of the KeTimer API in subr_ntoskrnl.c, just
as it is in Windows. This reduces code duplication and more closely
imitates the way things are done in Windows.
- Modify ndis_encode_parm() to deal with the case where we have
a registry key expressed as a hex value ("0x1") which is being
read via NdisReadConfiguration() as an int. Previously, we tried
to decode things like "0x1" with strtol() using a base of 10, which
would always yield 0. This is what was causing problems with the
Intel 2200BG Centrino 802.11g driver: the .inf file that comes
with it has a key called RadioEnable with a value of 0x1. We
incorrectly decoded this value to '0' when it was queried, hence
the driver thought we wanted the radio turned off.
- In if_ndis.c, most drivers don't accept NDIS_80211_AUTHMODE_AUTO,
but NDIS_80211_AUTHMODE_SHARED may not be right in some cases,
so for now always use NDIS_80211_AUTHMODE_OPEN.
NOTE: There is still one problem with the Intel 2200BG driver: it
happens that the kernel stack in Windows is larger than the kernel
stack in FreeBSD. The 2200BG driver sometimes eats up more than 2
pages of stack space, which can lead to a double fault panic.
For the moment, I got things to work by adding the following to
my kernel config file:
options KSTACK_PAGES=8
I'm pretty sure 8 is too big; I just picked this value out of a hat
as a test, and it happened to work, so I left it. 4 pages might be
enough. Unfortunately, I don't think you can dynamically give a
thread a larger stack, so I'm not sure how to handle this short of
putting a note in the man page about it and dealing with the flood
of mail from people who never read man pages.
snprintf() and vsnprintf() in FreeBSD kernel land).
This is needed by the Intel Centrino 2200BG driver. Unfortunately, this
driver still doesn't work right with Project Evil even with this tweak,
but I'm unable to diagnose the problem since I don't have access to a
sample card.
for Windows are deserialized miniports. Such drivers maintain their own
queues and do their own locking. This particular driver is not deserialized
though, and we need special support to handle it correctly.
Typically, in the ndis_rxeof() handler, we pass all incoming packets
directly to (*ifp->if_input)(). This in turn may cause another thread
to run and preempt us, and the packet may actually be processed and
then released before we even exit the ndis_rxeof() routine. The
problem with this is that releasing a packet calls the ndis_return_packet()
function, which hands the packet and its buffers back to the driver.
Calling ndis_return_packet() before ndis_rxeof() returns will screw
up the driver's internal queues since, not being deserialized,
it does no locking.
To avoid this problem, if we detect a serialized driver (by checking
the attribute flags passed to NdisSetAttributesEx(), we use an alternate
ndis_rxeof() handler, ndis_rxeof_serial(), which puts the call to
(*ifp->if_input)() on the NDIS SWI work queue. This guarantees the
packet won't be processed until after ndis_rxeof_serial() returns.
Note that another approach is to always copy the packet data into
another mbuf and just let the driver retain ownership of the ndis_packet
structure (ndis_return_packet() never needs to be called in this
case). I'm not sure which method is faster.
that I added recently:
- When a periodic timer fires, it's automatically re-armed. We must
make sure to re-arm the timer _before_ invoking any caller-supplied
defered procedure call: the DPC may choose to call KeCancelTimer(),
and re-arming the timer after the DPC un-does the effect of the
cancel.
- Fix similar issue with periodic timers in subr_ndis.c.
- When calling KeSetTimer() or KeSetTimerEx(), if the timer is
already pending, untimeout() it first before timeout()ing
it again.
- The old Atheros driver for the 5211 seems to use KeSetTimerEx()
incorrectly, or at the very least in a very strange way that
doesn't quite follow the Microsoft documentation. In one case,
it calls KeSetTimerEx() with a duetime of 0 and a period of 5000.
The Microsoft documentation says that negative duetime values
are relative to the current time and positive values are absolute.
But it doesn't say what's supposed to happen with positive values
that less than the current time, i.e. absolute values that are
in the past.
Lacking any further information, I have decided that timers with
positive duetimes that are in the past should fire right away (or
in our case, after only 1 tick). This also takes care of the other
strange usage in the Atheros driver, where the duetime is
specified as 500000 and the period is 50. I think someone may
have meant to use -500000 and misinterpreted the documentation.
- Also modified KeWaitForSingleObject() and KeWaitForMultipleObjects()
to make the same duetime adjustment, since they have the same rules
regarding timeout values.
- Cosmetic: change name of 'timeout' variable in KeWaitForSingleObject()
and KeWaitForMultipleObjects() to 'duetime' to avoid senseless
(though harmless) overlap with timeout() function name.
With these fixes, I can get the 5211 card to associate properly with
my adhoc net using driver AR5211.SYS version 2.4.1.6.
if_ndis.c has been split into if_ndis_pci.c and if_ndis_pccard.c.
The ndiscvt(8) utility should be able to parse device info for PCMCIA
devices now. The ndis_alloc_amem() has moved from kern_ndis.c to
if_ndis_pccard.c so that kern_ndis.c no longer depends on pccard.
NOTE: this stuff is not guaranteed to work 100% correctly yet. So
far I have been able to load/init my PCMCIA Cisco Aironet 340 card,
but it crashes in the interrupt handler. The existing support for
PCI/cardbus devices should still work as before.
along with KeInitializeTimerEx(), KeSetTimer(), KeSetTimerEx(),
KeCancelTimer(), KeReadStateTimer() and KeInitializeDpc(). I don't
know for certain that these will make the Atheros driver happy since
I don't have the card/driver combo needed to test it, but these are
fairly independent so they shouldn't break anything else.
- Debugger() is present even in kernels without options DDB, so no
conditional compilation is necessary (pointed out by bde).
- Remove the extra km_acquirecnt member that I added to struct kmutant
and embed it within an unused portion of the structure instead, so that
we don't make the structure larger than it's defined to be in Windows.
I don't know what crack I was smoking when I decided it was ok to do
this, but it's worn off now.
routines to guard against problems caused by (possibly) buggy drivers.
The RealTek 8180 wireless driver calls NdisFreeBuffer() to release
some of its buffers _after_ it's already called NdisFreeBufferPool()
to destroy the pool to which the buffers belong. In our implementation,
this error causes NdisFreeBuffer() to touch stale heap memory.
If you are running a release kernel, and hence have INVARIANTS et al
turned off, it turns out nothing happens. But if you're using a
development kernel config with INVARIANTS on, the malloc()/free()
sanity checks will scribble over the pool memory with 0xdeadc0de
once it's released so that any attempts to touch it will cause a
trap, and indeed this is what happens. It happens that I run 5.2-RELEASE
on my laptop, so when I tested the rtl8180.sys driver, it worked fine
for me, but people trying to run it with development systems checked
out or cvsupped from -current would get a page fault on driver load.
I can't find any reason why the NDISulator would cause the RealTek
driver to do the NdisFreeBufferPool() prematurely, and the same driver
obviously works with Windows -- or at least, it doesn't cause a crash:
the Microsoft documentation for NdisFreeBufferPool() says that failing
to return all buffers to the pool before calling NdisFreeBufferPool()
causes a memory leak.
I've written to my contacts at RealTek asking them to check if this
is indeed a bug in their driver. In the meantime, these new sanity checks
will catch this problem and issue a warning rather than causing a trap.
The trick is to keep a count of outstanding buffers for each buffer pool,
and if the driver tries to call NdisFreeBufferPool() while there are still
buffers outstanding, we mark the pool for deletion and then defer
destroying it until after the last buffer has been reclaimed.
is set, since some drivers with debug info can be very chatty.
Also implement DbgBreakPoint(), which is the Windows equivalent of
Debugger(). Unfortunately, this forces subr_ntoskrnl.c to include
opt_ddb.h.
- When adding new waiting threads to the waitlist for an object,
use INSERT_LIST_TAIL() instead of INSERT_LIST_HEAD() so that new
waiters go at the end of the list instead of the beginning. When we
wake up a synchronization object, only the first waiter is awakened,
and this needs to be the first thread that actually waited on the object.
- Correct missing semicolon in INSERT_LIST_TAIL() macro.
- Implement lookaside lists correctly. Note that the Am1771 driver
uses lookaside lists to manage shared memory (i.e. DMAable) buffers
by specifying its own alloc and free routines. The Microsoft documentation
says you should avoid doing this, but apparently this did not deter
the developers at AMD from doing it anyway.
With these changes (which are the result of two straight days of almost
non-stop debugging), I think I finally have the object/thread handling
semantics implemented correctly. The Am1771 driver no longer crashes
unexpectedly during association or bringing the interface up.
The Am1771 driver will sometimes do the following:
- Some thread-> NdisScheduleWorkItem(some work)
- Worker thread -> do some work, KeWaitForSingleObject(some event)
- Some other thread -> NdisScheduleWorkItem(some other work)
When the second call to NdisScheduleWorkItem() occurs, the NDIS worker
thread (in our case ndis taskqueue) is suspended in KeWaitForSingleObject()
and waiting for an event to be signaled. This is different from when
the worker thread is idle and waiting on NdisScheduleWorkItem() to
send it more jobs. However, the ndis_sched() function in kern_ndis.c
always calls kthread_resume() when queueing a new job. Normally this
would be ok, but here this causes KeWaitForSingleObject() to return
prematurely, which is not what we want.
To fix this, the NDIS threads created by kern_ndis.c maintain a state
variable to indicate whether they are running (scanning the job list
and executing jobs) or sleeping (blocked on kthread_suspend() in
ndis_runq()), and ndis_sched() will only call kthread_resume() if
the thread is in the sleeping state.
Note that we can't just check to see if the thread is on the run queue:
in both cases, the thread is sleeping, but it's sleeping for different
reasons.
This stops the Am1771 driver from emitting various "NDIS ERROR" messages
and fixes some cases where it crashes.
