Summary:
* if_setreassignfn for wireguard.
* if_getinputfn() and if_getstartfn() for various drivers. Use the
function descriptor typedefs for these and the setters.
* vlantrunk accessor. This is used by VLAN_CAPABILITIES() used by
several drivers, as well as directly by mxge(4).
* if_pcp member accessor, used by cxgbe.
* accessors for netmap adapter.
Sponsored by: Juniper Networks, Inc.
Reviewed By: glebius
Differential Revision: https://reviews.freebsd.org/D38202
These two fuctions were identical, so move them into the common
vlan_set_pcp() function, exposed in the if_vlan_var.h header.
Reviewed by: donner
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31275
802.1ad interfaces are created with ifconfig using the "vlanproto" parameter.
Eg., the following creates a 802.1Q VLAN (id #42) over a 802.1ad S-VLAN
(id #5) over a physical Ethernet interface (em0).
ifconfig vlan5 create vlandev em0 vlan 5 vlanproto 802.1ad up
ifconfig vlan42 create vlandev vlan5 vlan 42 inet 10.5.42.1/24
VLAN_MTU, VLAN_HWCSUM and VLAN_TSO capabilities should be properly
supported. VLAN_HWTAGGING is only partially supported, as there is
currently no IFCAP_VLAN_* denoting the possibility to set the VLAN
EtherType to anything else than 0x8100 (802.1ad uses 0x88A8).
Submitted by: Olivier Piras
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D26436
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
toe_l2_resolve to fill up the complete vtag and not just the vid.
Reviewed by: kib@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D16752
According to 802.1Q-2014, VLAN tagged packets with VLAN id 0 should be
considered as untagged, and only PCP and DEI values from the VLAN tag
are meaningful. See for instance
https://www.cisco.com/c/en/us/td/docs/switches/connectedgrid/cg-switch-sw-master/software/configuration/guide/vlan0/b_vlan_0.html.
Make it possible to specify PCP value for outgoing packets on an
ethernet interface. When PCP is supplied, the tag is appended, VLAN
id set to 0, and PCP is filled by the supplied value. The code to do
VLAN tag encapsulation is refactored from the if_vlan.c and moved into
if_ethersubr.c.
Drivers might have issues with filtering VID 0 packets on
receive. This bug should be fixed for each driver.
Reviewed by: ae (previous version), hselasky, melifaro
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D14702
used inside "if" statements comparing with another value.
Detailed explanation:
"if (a ? b : c != 0)" is not the same like "if ((a ? b : c) != 0)"
which is the expected behaviour of a function macro.
Affects:
toecore, linuxkpi and ibcore.
Reviewed by: kib
MFC after: 3 days
Sponsored by: Mellanox Technologies
which refers to IEEE 802.1p class of service and maps to the frame
priority level.
Values in order of priority are: 1 (Background (lowest)),
0 (Best effort (default)), 2 (Excellent effort),
3 (Critical applications), 4 (Video, < 100ms latency),
5 (Video, < 10ms latency), 6 (Internetwork control) and
7 (Network control (highest)).
Example of usage:
root# ifconfig em0.1 create
root# ifconfig em0.1 vlanpcp 3
Note:
The review D801 includes the pf(4) part, but as discussed with kristof,
we won't commit the pf(4) bits for now.
The credits of the original code is from rwatson.
Differential Revision: https://reviews.freebsd.org/D801
Reviewed by: gnn, adrian, loos
Discussed with: rwatson, glebius, kristof
Tested by: many including Matthew Grooms <mgrooms__shrew.net>
Obtained from: pfSense
Relnotes: Yes
bpf(4) and vlan(4) related event declarations to bpf.h and
if_vlan_var.h. To avoid dependency on eventhandler.h, protect
these declarations with ifdef SYS_EVENTHANDLER_H.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
802.1q-defined 16-bit VID, CFI, and PCP field in host by order) and a
VLAN ID (VID). Tags go in packets. VIDs identify VLANs.
No functional change is intended, so this should be safe to MFC. Further
cleanup with functional changes will be committed separately (for example,
renaming vlan_tag/vlan_tag_p, which modify the KPI and KBI).
Reviewed by: bz
Sponsored by: ADARA Networks, Inc.
MFC after: 3 days
Add macro EVL_APPLY_VLID() which may be used to apply an 802.1q VLAN ID
to the M_VLANTAG field in an mbuf packet header non-destructively.
This will be used by net80211 to begin with.
Add macro EVL_APPLY_PRI() which may be used to apply an 802.1p priority
class to the M_VLANTAG field in an mbuf packet header non-destructively.
Add other macros for manipulating tags and the CFI bit.
Submitted by: Boris Kovalenko (EVL_CFIOFTAG(), EVL_MAKETAG())
m_pkthdr.ether_vlan. The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.
Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:
m->m_pkthdr.ether_vtag = vlan_id; /* ntohs()? */
m->m_flags |= M_VLANTAG;
to mark the packet m with the specified VLAN tag.
On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:
if (m->m_flags & M_VLANTAG) {
... = m->m_pkthdr.ether_vtag; /* htons()? */
... pass tag to hardware ...
}
VLAN tags are stored in host byte order. Byte swapping may be necessary.
(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)
Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition. No more tag
memory allocation have to be done.
Reviewed by: thompsa, yar
Sponsored by: TCP/IP Optimization Fundraise 2005
work by yar, thompsa and myself. The checksum offloading part also involves
work done by Mihail Balikov.
The most important changes:
o Instead of global linked list of all vlan softc use a per-trunk
hash. The size of hash is dynamically adjusted, depending on
number of entries. This changes struct ifnet, replacing counter
of vlans with a pointer to trunk structure. This change is an
improvement for setups with big number of VLANs, several interfaces
and several CPUs. It is a small regression for a setup with a single
VLAN interface.
An alternative to dynamic hash is a per-trunk static array with
4096 entries, which is a compile time option - VLAN_ARRAY. In my
experiments the array is not an improvement, probably because such
a big trunk structure doesn't fit into CPU cache.
o Introduce an UMA zone for VLAN tags. Since drivers depend on it,
the zone is declared in kern_mbuf.c, not in optional vlan(4) driver.
This change is a big improvement for any setup utilizing vlan(4).
o Use rwlock(9) instead of mutex(9) for locking. We are the first
ones to do this! :)
o Some drivers can do hardware VLAN tagging + hardware checksum
offloading. Add an infrastructure for this. Whenever vlan(4) is
attached to a parent or parent configuration is changed, the flags
on vlan(4) interface are updated.
In collaboration with: yar, thompsa
In collaboration with: Mihail Balikov <mihail.balikov interbgc.com>
case if memory allocation failed.
- Remove fourth argument from VLAN_INPUT_TAG(), that was used
incorrectly in almost all drivers. Indicate failure with
mbuf value of NULL.
In collaboration with: yongari, ru, sam
value from an m_tag, but also to set it. This reduces
complex code duplication and improves its readability.
Alas, we shouldn't rename the macro to VLAN_TAG_LVALUE()
globally because that would cause pain for kernel module
port maintainers and vendors using FreeBSD as their codebase.
Added a clarifying comment instead.
Discussed with: ru, glebius
X-MFC-After: 6.0-RELEASE (MFC is good just to reduce the diff)
a packet has VLAN mbuf tag attached. This is faster to check than
m_tag_locate(), and allows us to use the tags in non-vlan(4) VLAN
producers.
The first argument to VLAN_OUTPUT_TAG() is now unused but retained
for backward compatibility.
While here, embellish a fix in rev. 1.174 of if_ethersubr.c -- it
now checks for packets with VLAN (mbuf) tags, and it should now
be possible to bridge(4) on vlan(4)'s whose parent interfaces
support VLAN decapsulation in hardware.
Reviewed by: sam
without IFCAP_VLAN_HWTAGGING. The previous version of the
leading comment in this file could lead to the opposite conclusion.
Fix some typos in the comment as well.
extracted from received frames, both in the IFCAP_VLAN_HWTAGGING case
and not. (Some drivers may already do this masking internally, but
doing it here doesn't hurt and insures consistency.)
- In vlan_ioctl(), don't let the user set a VLAN ID value with anything
besides the VLID bits set, otherwise we will have trouble matching
an interface in vlan_input() later.
PR: kern/46405
drivers "tag packets" with an m_tag and the input packet handling recognizes
such packets and does the right thing
o track the number of active vlans on an interface; this lets lots of places
only do vlan-specific processing when needed
o track changes to ether_ifdetach/ether_ifattach
o track bpf changes
o eliminate the use of M_PROTO1 for communicating to drivers about tagged
packets
o eliminate the use of IFF_LINK0 for drivers communicating to the vlan code
that they support h/w tagging; replaced by explicit interface capabilities
o add ifnet capabilities for h/w tagging and support of "large mtu's"
o use new interface capabilities to auto-configure use of large mtu's and h/w
tagging
o add support for proper handling of promiscuous mode
o document driver/vlan communication conventions
Reviewed by: many
Approved by: re
unit allocation with a bitmap in the generic layer. This
allows us to get rid of the duplicated rman code in every
clonable interface.
Reviewed by: brooks
Approved by: phk
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
are configured, and/or associated with a parent device. If you
receive a frame for a VLAN that's not in the list, you walk off
the end of the list. Boom.
Submitted by: C. Stephen Gunn <csg@waterspout.com>
PR: 15291
work reliably yet (I've had panics), but it does seem to occasionally
be able to transmit and receive syntactically-correct packets.
Also fixes one of if_ethersubr.c's legion style bugs, and removes
the hostcache code from standard kernels---the code that depends on it
is not going to happen any time soon, I'm afraid.