The current support for controlling i2c bus speed is an inconsistant mess.
There are 4 symbolic speed values defined, UNKNOWN, SLOW, FAST, FASTEST.
It seems to be universally assumed that SLOW means the standard 100KHz
rate from the original spec. Nothing ever calls iicbus_reset() with a
speed of FAST, although some drivers would treat it as the 400KHz standard
speed. Mostly iicbus_reset() is called with the speed set to UNKNOWN or
FASTEST, and there's really no telling what any individual driver will do
with those.
The speed of an i2c bus is limited by the speed of the slowest device on
the bus. This means that generally the bus speed needs to be configured
based on the board/system and the components within it. Historically for
i2c we've configured with device hints. Newer systems use FDT data and it
documents a clock-frequency property for i2c busses. Hobbyists and
developers are likely to want on the fly changes. These changes provide
all 3 methods, but do not require any existing drivers to change to use
the new facilities.
This adds an iicbus method, iicbus_get_frequency(dev, speed) that gets the
frequency for the requested symbolic speed. If the symbolic speed is SLOW
or if there is no speed configured for the bus, the returned value is
100KHz, always. Otherwise, if bus speed is configured by hints, fdt,
tunable, or sysctl, that speed is returned. It also adds a helper
function, iicbus_init_frequency() that any bus driver subclassed from
iicbus can initialize the frequency from some other source of info.
Initial driver implementations are provided for Freescale and TI.
Differential Revision: https://reviews.freebsd.org/D1174
PR: 195009
This is the general support to allow the use of GPIO pins as interrupt
sources for direct gpiobus children.
The use of GPIO pins as generic interrupt sources (for an ethernet driver
for example) will only be possible when arm/intrng is complete. Then, most
of this code will need to be rewritten, but it works for now, is better
than what we have and will allow further developments.
Tested on: ar71xx (RSPRO), am335x (BBB), bcm2835 (Raspberry pi)
Differential Revision: https://reviews.freebsd.org/D999
Reviewed by: rpaulo
Due to adapter->hw.fc.requested_mode is filled with default value
after ixgbe_initialize_receive_units(), this leads to enabling
DROP_EN in most cases.
Tested by: ae
MFC after: 1 week
Like in r259717, the prority goes from "error" to "debug" to avoid
spamming logs when the connectors are polled.
PR: 194770
Submitted by: Larry Rosenman <ler@lerctr.org>
MFC after: 1 week
I did this wrong - I should've included a state flag for each callout
to see if it was supposed to run or not. I didn't do that.
Instead, just use mutexes anyway.
Suggested by: jhb
- Add a per-device mutex to the softc and use it for bus_dma tags,
CAM SIMs, callouts, and interrupt handler.
- Switch from timeout(9) to callout(9).
- Add a separate global mutex to protect the global event buffer ring.
- Return completed index from iir_intr_locked() and remove the global
gdt_wait_* variables.
- Remove global list of gdt softcs and replace its use with
devclass_get_device().
- Use si_drv1 to store softc pointer in the SDEV_PER_HBA case instead
of minor numbers.
- Do math on osreldate instead of dubious char math on osrelease[]
that didn't work on 10.0+.
- Use bus_*() instead of bus_space_*().
- Use device_printf() instead of printf() with a unit number.
Tested by: no one
to the build in either sys/conf/files* or sys/modules/dpt/Makefile. Also,
it was denoted as "doesn't quite work yet" when the file was initially added
(which may account for it never having been hooked up to the build).
have both kern_open() and kern_openat(); change the callers to use
kern_openat().
This removes one (sometimes two) levels of indirection and
consolidates arguments checks.
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
leave a port permanently disabled when a copper cable is unplugged and
then plugged right back in.
lacp_linkstate goes looking for the current ifmedia on a link state
change and it could get stale information from cxgbe(4) on a module
unplug followed by replug. The fix is to process module events before
link-state events within the driver, and to always rebuild the ifmedia
list on a module change event (instead of rebuilding it lazily).
Thanks to asomers@ for the problem report and detailed analysis to go
with it.
MFC after: 1 week
This will allow to attach UART drivers lying directly on the root node
instead of simple-bus compatible bus only.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Instead of waiting for empty TX FIFO it is more reasonable to
block on full FIFO. As soon as FIFO slot is free the character
can be transmitted.
In case of TX FIFO disabled, TXFF bit indicates that transmit
register is not empty.
Obtained from: Semihalf
Reviewed by: andrew, emaste
Sponsored by: The FreeBSD Foundation
sb_cc member of struct sockbuf to a couple of inline functions:
sbavail() and sbused()
Right now they are equal, but once notion of "not ready socket buffer data",
will be checked in, they are going to be different.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
convert a global timer to a per-controller timer. This works much better
with locking and removes the need for several global lookup tables.
Tested by: ambrisko
state said device should go into.
This was a snafu introduced in the ACPI/PCI awareness separation.
When putting a device into a power state, the bus (and thus firmware,
eg ACPI) should be asked before hand to check whether the device
can indeed go into that power state.
There's a set of nodes in ACPI under each device - the _SxD nodes - which
state which ACPI power state to put the device into when the system is
going into power save state 'x'. So when going into S3, the existence
of an _S3D node would override whatever the system was trying to do.
By default the PCI code wants to put devices into D3 before suspending.
I have a laptop here (Asus Zenbook - check the PR) whose EHCI controller
really wants to be in D2 during suspend, not D3. So if we put it into
D3 and then try to enter S3, everything hangs. The device itself
can go into D3 - it just can't be there when the call to ACPI to enter
S3 occurs. The PCI patch fixes this.
jkim@ noticed that the same is needed for the ACPI child device
enumeration.
Thankyou to Matt Dillon (the programmer, not the actor) for buying me
this particular laptop so I could debug the issues with the Atheros
AR9485 that is in it. It's his fault that I ended up with this
laptop and was sufficiently annoyed by the lack of USB suspend
to go down this rabbit hole.
Tested:
* Thinkpad T400
* Thinkpad X230
* Thinkpad T42
* Thinkpad T60
* Asus Zenbook (see PR)
* Asus EEEPC 701
* Asus EEEPC 1001PX
TODO:
* Figure out what we should do about devices we unload drivers for
that want to be in a specific state when entering S3 / S4 -
the "put devices into D3 if they're not bound to a driver" option
may also mess with things.
PR: kern/194884
Reviewed by: jhb, jkim
MFC after: 1 week
Relnotes: yes
Sponsored by: Matt Dillon <dillon@apollo.backplane.com> (hardware)
IGP may declare subclass as either VGA-compatible, or non-VGA. The
difference is that in the later case, IGP does not claim VGA cycles.
Other than that, the device functions normally, and agp_i810 should
attach to it.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
was possible for a regular user to setup the dump device if he had write access
to the given device. In theory it is a security issue as user might get access
to kernel's memory after provoking kernel crash, but in practise it is not
recommended to give regular users direct access to storage devices.
Rework the code so that we do privileges check within the set_dumper() function
to avoid similar problems in the future.
Discussed with: secteam
The prior change to not enable LRO by default has confused several
people. The configurations where LRO is problematic is not the
typical use case for VirtIO, and due to other issues, this often
requires checksum offloading to be disabled anyways.
PR: 185864
MFC after: 2 weeks
- Remove duplicated sources between standard part of the kernel and
module. In particular, it caused duplicated lock initialization and
sysctl registration, both having bad consequences.
- Add missed source files to module.
- Static part of the kernel provides randomdev module, not
random_adaptors. Correct dependencies.
- Use cdev modules declaration macros.
Approved by: secteam (delphij)
Reviewed by: markm
buffer from asm to C, which reduces amount of arguments for inline asm
and simplifies constraints. Use unsigned types consistently.
Submitted by: bde
Approved by: secteam (delphij)
Reviewed by: markm
MFC after: 1 week
After resource allocation and release, resource list entry
stays non-NULL. This causes panic in ofwbus_alloc_resource()
on subsequent resource allocation.
Clean appropriate list entry on release to avoid this.
Obtained from: Semihalf
Reviewed by: ian
Sponsored by: The FreeBSD Foundation
it, except Ethernet, where it carried ng_ether(4) pointer.
For now carry the pointer in if_l2com directly.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Support the KDB alt break sequence to enter the debugger,
panic, reboot, etc. [1]
- Provide emergency write feature description. Note that QEMU
does not implement this feature.
- Make the VTCON_FLAG_* defines sequential once again.
- When the multiple port feature is not negotiated, query the
rows and columns of the one console during the device attach
when the size feature is negotiated.
- Report failure to the device if hot plugging a port fails.
- Acknowledge the console port event with an open event. This
is required by the spec, but QEMU doesn't seem to care.
Submitted by: Juniper [1]
MFC after: 1 month
-Improved VF stability, thanks to changes from Ryan Stone,
and Juniper.
- RSS fixes in the ixlv driver
- link detection in the ixlv driver
- New sysctl's added in ixl and ixlv
- reset timeout increased for ixlv
- stability fixes in detach
- correct media reporting
- Coverity warnings fixed
- Many small bug fixes
- VF Makefile modified - nvm shared code needed
- remove unused sleep channels in ixlv_sc struct
Submitted by: Eric Joyner (committed by jfv)
MFC after: 1 week
Therefore, to set histry size to 2000 lines, add the following line to
your kernel configuration file:
options SC_HISTORY_SIZE=2000
The default history remains at 500 lines.
MFC after: 1 week
