Commit Graph

20 Commits

Author SHA1 Message Date
John Baldwin
04584935bc Various fixes to hptrr(4):
- Use the existing vbus locks instead of Giant for the CAM sim lock.
- Use callout(9) instead of timeout(9).
- Mark the interrupt handler MPSAFE.
- Don't attempt to pass data in the softc from probe() to attach().
- Remove compat shims for FreeBSD versions older than 8.0.

Reviewed by:	Steve Chang <ychang@highpoint-tech.com>
2014-08-05 23:47:26 +00:00
Xin LI
7634a04b30 Apply vendor fixes to the High Point drivers:
- Don't call xpt_free_path() in os_query_remove_device() and
   always return TRUE.
 - Update os_buildsgl() to support build logical SG table which
   will be used by lower RAID module.
 - Return CAM_SEL_TIMEOUTstatus for SCSIcommand failed as target
   missing.

Many thanks to HighPoint for providing this driver update.

Submitted by:	Steve Chang
Reviewed by:	mav
MFC after:	3 days
2014-06-11 18:24:51 +00:00
Scott Long
eb8a7632ba Re-do r255853. Along with adding back the API/ABI changes from the
original, this hides the contents of cam_compat.h from ktrace/kdump/truss,
avoiding problems there.  There are no user-servicable parts in there, so
no need for those tools to be groping around in there.

Approved by:    re
2013-09-25 17:16:21 +00:00
Glen Barber
0082e54e9d Revert r255853 pending fixes to build errors in usr.bin/kdump
Approved by:	re (implicit)
2013-09-25 01:48:45 +00:00
Scott Long
185884259b Update the CAM API for FreeBSD 10:
- Remove the timeout_ch field.  It's been deprecated since FreeBSD 7.0;
  MPSAFE drivers should be managing their own timeout storage.  The
  remaining non-MPSAFE drivers have been modified to also manage their own
  storage, and should be considered for updating to MPSAFE (or removal)
  during the FreeBSD 10.x lifecycle.

- Add fields related to soft timeouts and quality of service, to be used
  in upcoming work.

- Add room for more flags in the CCB header and path_inq structures.

- Begin support for extended 64-bit LUNs.

- Bump the CAM version number to 0x18, but add compat shims.  Tested with
  camcontrol and smartctl.

Reviewed by:    nathanw, ken, kib
Approved by:    re
Obtained from:  Netflix
2013-09-24 16:50:53 +00:00
Sean Bruno
afbd1372e7 Silence warning from clang:
/home/sbruno/bsd/head/sys/dev/hptrr/hptrr_osm_bsd.c:178:66: warning: for loop has empty body [-Wempty-body]
                for (order=0, size=PAGE_SIZE; size<f->size; order++, size<<=1) ;
                                                                               ^
/home/sbruno/bsd/head/sys/dev/hptrr/hptrr_osm_bsd.c:178:66: note: put the semicolon on a separate line to silence this warning

Obtained from:	Yahoo! Inc.
MFC after:	2 weeks
2013-04-28 20:55:45 +00:00
Alexander Motin
e5dfa058da MFprojects/camlock r248982:
Stop abusing xpt_periph in random plases that really have no periph related
to CCB, for example, bus scanning.  NULL value is fine in such cases and it
is correctly logged in debug messages as "noperiph".  If at some point we
need some real XPT periphs (alike to pmpX now), quite likely they will be
per-bus, and not a single global instance as xpt_periph now.
2013-04-14 09:55:48 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
Eitan Adler
f181f0e74b attach_generic causes missing devices in /dev when the driver
interacts with some non-highpoint controollers. Change attach_generic to
be off by default.

PR:		kern/168910
Submitted by:	Richard Yao <ryao@gentoo.org>
Approved by:	cperciva
No objections by:	-hackers
Obtained from:	Gentoo FreeBSD
MFC after:	2 weeks
2012-06-17 02:46:27 +00:00
Marius Strobl
f3b080e6ab - Just use cam_calc_geometry(9) on newer version of FreeBSD rather than
duplicating it.
- In hptmv(4) and hptrr(4) use __FBSDID and DEVMETHOD_END.
2011-11-23 21:43:51 +00:00
Rui Paulo
30aa84b727 Pass a format string to make_dev(). 2010-10-13 14:41:52 +00:00
Alexander Motin
83c5d981ac MFp4: Large set of CAM inprovements.
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
Alexander Motin
c43ee88764 Introduce hw.hptrr.attach_generic loader tunable to deny hptrr driver
attach chips with generic Marvell (non-HighPoint) PCI identification.
These chips are also supported by ata(4). Some vendors, like Supermicro,
are using same chips without providing HPT RAID BIOS.

PR:		kern/120842, kern/136750
2009-11-08 11:33:51 +00:00
Ken Smith
eb4d96a268 Fix a boot hang for hptrr(4) caused by changes introduced in r195534.
It is necessary to make sure cpi->transport is set for xpt_scan_bus() to
work properly.

Submitted by: Bernhard Schmidt (scb+freebsd-current <at> techwires
              <dot> net)
Reviewed by:  scottl
Approved by:  re (kib)
2009-08-21 01:00:15 +00:00
Colin Percival
7d845dde8d Remove build timestamps from the following files:
/boot/kernel/hptrr.ko
/etc/mail/*.cf
/lib/libcrypto.so.5
/usr/bin/ntpq
/usr/sbin/amd
/usr/sbin/iasl
/usr/sbin/ntpd
/usr/sbin/ntpdate
/usr/sbin/ntpdc

There does not appear to be any purpose to having these timestamps, and
they have the irritating consequence that the aforementioned files will
be different every time they are rebuilt.

After this commit, the only remaining build timestamps are in the kernel,
the boot loaders, /usr/include/osreldate.h (the year in the copyright
notice), and lib*.a (the timestamps on all of the included .o files).

Reviewed by:	scottl (hptrr), gshapiro (sendmail), simon (openssl),
		roberto (ntp), jkim (acpica)
Approved by:	re (kib)
2009-07-11 22:30:37 +00:00
Scott Long
9d6a74eb84 Fix a mistake made during the import of the driver. Previous versions of
HPT drivers would sometimes test the value of a preprocessor definition but
not always make sure that the definition existed in the first place, leading
to warnings on newer compilers.  I blindly assumed the same with this driver,
and it turned out to be wrong and to enable some code that doesn't work.
2008-03-08 18:06:48 +00:00
Scott Long
b204a4e7a1 Fix a symbol conflict between hptrr and hptmv 2008-02-06 05:33:17 +00:00
Scott Long
4fdb276a88 Update the hptrr driver to version 1.2. This adds port multiplier support
for several cards.  See the Highpoint website for more information.  Again,
many thanks to Highpoint for their continued support of FreeBSD.
2008-02-06 01:02:20 +00:00
Maxim Sobolev
9e2211fd05 Hide common prints under bootverbose.
Obtained from:	src/sys/dev/rr232x/osm_bsd.c, rev.1.2-1.3
MFC after:	2 weeks
2008-01-15 19:21:08 +00:00
Scott Long
b063a42270 Add the 'hptrr' driver for supporting the following Highpoint RocketRAID
cards:

     o   RocketRAID 172x series
     o   RocketRAID 174x series
     o   RocketRAID 2210
     o   RocketRAID 222x series
     o   RocketRAID 2240
     o   RocketRAID 230x series
     o   RocketRAID 231x series
     o   RocketRAID 232x series
     o   RocketRAID 2340
     o   RocketRAID 2522

Many thanks to Highpoint for their continued support of FreeBSD.

Submitted by: Highpoint
2007-12-15 00:56:17 +00:00