This opcode can be used to attach some data to external action opcode.
And unlike to O_EXTERNAL_INSTANCE opcode, this opcode does not require
creating of named instance to pass configuration arguments to external
action handler. The data is coming just next to O_EXTERNAL_ACTION opcode.
The userlevel part currenly supports formatting for opcode with ipfw_insn
size, by default it expects u16 numeric value in the arg1.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Since the state name is an optional argument, it often can conflict
with other options. To avoid ambiguity now the state name must be
prefixed with a colon.
Obtained from: Yandex LLC
MFC after: 2 week
Sponsored by: Yandex LLC
is a 32-bit socklen_t, do_get3() passes the kernel to access the wrong
32-bit half on big-endian LP64 machines when simply casting the 64-bit
size_t optlen to a socklen_t pointer.
While at it and given that the intention of do_get3() apparently is to
hide/wrap the fact that socket options are used for communication with
ipfw(4), change the optlen parameter of do_set3() to be of type size_t
and as such more appropriate than uintptr_t, too.
MFC after: 3 days
The module works together with ipfw(4) and implemented as its external
action module.
Stateless NAT64 registers external action with name nat64stl. This
keyword should be used to create NAT64 instance and to address this
instance in rules. Stateless NAT64 uses two lookup tables with mapped
IPv4->IPv6 and IPv6->IPv4 addresses to perform translation.
A configuration of instance should looks like this:
1. Create lookup tables:
# ipfw table T46 create type addr valtype ipv6
# ipfw table T64 create type addr valtype ipv4
2. Fill T46 and T64 tables.
3. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
4. Create NAT64 instance:
# ipfw nat64stl NAT create table4 T46 table6 T64
5. Add rules that matches the traffic:
# ipfw add nat64stl NAT ip from any to table(T46)
# ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96
6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.
Stateful NAT64 registers external action with name nat64lsn. The only
one option required to create nat64lsn instance - prefix4. It defines
the pool of IPv4 addresses used for translation.
A configuration of instance should looks like this:
1. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
2. Create NAT64 instance:
# ipfw nat64lsn NAT create prefix4 A.B.C.D/28
3. Add rules that matches the traffic:
# ipfw add nat64lsn NAT ip from any to A.B.C.D/28
# ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96
4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6434
Now zero value of arg1 used to specify "tablearg", use the old "tablearg"
value for "nat global". Introduce new macro IP_FW_NAT44_GLOBAL to replace
hardcoded magic number to specify "nat global". Also replace 65535 magic
number with corresponding macro. Fix typo in comments.
PR: 211256
Tested by: Victor Chernov
MFC after: 3 days
Zero fib is correct value and it conflicts with IP_FW_TARG.
Use bprint_uint_arg() only when opcode contains IP_FW_TARG,
otherwise just print numeric value with cleared high-order bit.
MFC after: 3 days
setdscp's argument can have zero value that conflicts with IP_FW_TARG value.
Always set high-order bit if parser doesn't find tablearg keyword.
MFC after: 3 days
The keep-state, limit and check-state now will have additional argument
flowname. This flowname will be assigned to dynamic rule by keep-state
or limit opcode. And then can be matched by check-state opcode or
O_PROBE_STATE internal opcode. To reduce possible breakage and to maximize
compatibility with old rulesets default flowname introduced.
It will be assigned to the rules when user has omitted state name in
keep-state and check-state opcodes. Also if name is ambiguous (can be
evaluated as rule opcode) it will be replaced to default.
Reviewed by: julian
Obtained from: Yandex LLC
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6674
as defined in RFC 6296. The module works together with ipfw(4) and
implemented as its external action module. When it is loaded, it registers
as eaction and can be used in rules. The usage pattern is similar to
ipfw_nat(4). All matched by rule traffic goes to the NPT module.
Reviewed by: hrs
Obtained from: Yandex LLC
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6420
objects with the same name in different sets.
Add optional manage_sets() callback to objects rewriting framework.
It is intended to implement handler for moving and swapping named
object's sets. Add ipfw_obj_manage_sets() function that implements
generic sets handler. Use new callback to implement sets support for
lookup tables.
External actions objects are global and they don't support sets.
Modify eaction_findbyname() to reflect this.
ipfw(8) now may fail to move rules or sets, because some named objects
in target set may have conflicting names.
Note that ipfw_obj_ntlv type was changed, but since lookup tables
actually didn't support sets, this change is harmless.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
It allows implementing loadable kernel modules with new actions and
without needing to modify kernel headers and ipfw(8). The module
registers its action handler and keyword string, that will be used
as action name. Using generic syntax user can add rules with this
action. Also ipfw(8) can be easily modified to extend basic syntax
for external actions, that become a part base system.
Sample modules will coming soon.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
directly in the O_FORWARD_IP6 opcode. Use getnameinfo(3) to formatting
the IPv6 addresses of such opcodes.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
we can't easily predict (in current parsing model)
if the keyword is ipfw(8) reserved keyword or port name.
Checking proto database via getprotobyname() consumes a lot of
CPU and leads to tens of seconds for parsing large ruleset.
Use list of reserved keywords and check them as pre-requisite
before doing getprotobyname().
Obtained from: Yandex LLC
This is the last major change in given branch.
Kernel changes:
* Use 64-bytes structures to hold multi-value variables.
* Use shared array to hold values from all tables (assume
each table algo is capable of holding 32-byte variables).
* Add some placeholders to support per-table value arrays in future.
* Use simple eventhandler-style API to ease the process of adding new
table items. Currently table addition may required multiple UH drops/
acquires which is quite tricky due to atomic table modificatio/swap
support, shared array resize, etc. Deal with it by calling special
notifier capable of rolling back state before actually performing
swap/resize operations. Original operation then restarts itself after
acquiring UH lock.
* Bump all objhash users default values to at least 64
* Fix custom hashing inside objhash.
Userland changes:
* Add support for dumping shared value array via "vlist" internal cmd.
* Some small print/fill_flags dixes to support u32 values.
* valtype is now bitmask of
<skipto|pipe|fib|nat|dscp|tag|divert|netgraph|limit|ipv4|ipv6>.
New values can hold distinct values for each of this types.
* Provide special "legacy" type which assumes all values are the same.
* More helpers/docs following..
Some examples:
3:41 [1] zfscurr0# ipfw table mimimi create valtype skipto,limit,ipv4,ipv6
3:41 [1] zfscurr0# ipfw table mimimi info
+++ table(mimimi), set(0) +++
kindex: 2, type: addr
references: 0, valtype: skipto,limit,ipv4,ipv6
algorithm: addr:radix
items: 0, size: 296
3:42 [1] zfscurr0# ipfw table mimimi add 10.0.0.5 3000,10,10.0.0.1,2a02:978:2::1
added: 10.0.0.5/32 3000,10,10.0.0.1,2a02:978:2::1
3:42 [1] zfscurr0# ipfw table mimimi list
+++ table(mimimi), set(0) +++
10.0.0.5/32 3000,0,10.0.0.1,2a02:978:2::1
Most of the tablearg-supported opcodes does not accept 0 as valid value:
O_TAG, O_TAGGED, O_PIPE, O_QUEUE, O_DIVERT, O_TEE, O_SKIPTO, O_CALLRET,
O_NETGRAPH, O_NGTEE, O_NAT treats 0 as invalid input.
The rest are O_SETDSCP and O_SETFIB.
'Fix' them by adding high-order bit (0x8000) set for non-tablearg values.
Do translation in kernel for old clients (import_rule0 / export_rule0),
teach current ipfw(8) binary to add/remove given bit.
This change does not affect handling SETDSCP values, but limit
O_SETFIB values to 32767 instead of 65k. Since currently we have either
old (16) or new (2^32) max fibs, this should not be a big deal:
we're definitely OK for former and have to add another opcode to deal
with latter, regardless of tablearg value.
* Implement proper checks for switching between global and set-aware tables
* Split IP_FW_DEL mess into the following opcodes:
* IP_FW_XDEL (del rules matching pattern)
* IP_FW_XMOVE (move rules matching pattern to another set)
* IP_FW_SET_SWAP (swap between 2 sets)
* IP_FW_SET_MOVE (move one set to another one)
* IP_FW_SET_ENABLE (enable/disable sets)
* Add IP_FW_XZERO / IP_FW_XRESETLOG to finish IP_FW3 migration.
* Use unified ipfw_range_tlv as range description for all of the above.
* Check dynamic states IFF there was non-zero number of deleted dyn rules,
* Del relevant dynamic states with singe traversal instead of per-rule one.
Userland changes:
* Switch ipfw(8) to use new opcodes.
Kernel changes:
* Add TEI_FLAGS_DONTADD entry flag to indicate that insert is not possible
* Support given flag in all algorithms
* Add "limit" field to ipfw_xtable_info
* Add actual limiting code into add_table_entry()
Userland changes:
* Add "limit" option as "create" table sub-option. Limit modification
is currently impossible.
* Print human-readable errors in table enry addition/deletion code.
* Add "flow:hash" algorithm
Kernel changes:
* Add O_IP_FLOW_LOOKUP opcode to support "flow" lookups
* Add IPFW_TABLE_FLOW table type
* Add "struct tflow_entry" as strage for 6-tuple flows
* Add "flow:hash" algorithm. Basically it is auto-growing chained hash table.
Additionally, we store mask of fields we need to compare in each instance/
* Increase ipfw_obj_tentry size by adding struct tflow_entry
* Add per-algorithm stat (ifpw_ta_tinfo) to ipfw_xtable_info
* Increase algoname length: 32 -> 64 (algo options passed there as string)
* Assume every table type can be customized by flags, use u8 to store "tflags" field.
* Simplify ipfw_find_table_entry() by providing @tentry directly to algo callback.
* Fix bug in cidr:chash resize procedure.
Userland changes:
* add "flow table(NAME)" syntax to support n-tuple checking tables.
* make fill_flags() separate function to ease working with _s_x arrays
* change "table info" output to reflect longer "type" fields
Syntax:
ipfw table fl2 create type flow:[src-ip][,proto][,src-port][,dst-ip][dst-port] [algo flow:hash]
Examples:
0:02 [2] zfscurr0# ipfw table fl2 create type flow:src-ip,proto,dst-port algo flow:hash
0:02 [2] zfscurr0# ipfw table fl2 info
+++ table(fl2), set(0) +++
kindex: 0, type: flow:src-ip,proto,dst-port
valtype: number, references: 0
algorithm: flow:hash
items: 0, size: 280
0:02 [2] zfscurr0# ipfw table fl2 add 2a02:6b8::333,tcp,443 45000
0:02 [2] zfscurr0# ipfw table fl2 add 10.0.0.92,tcp,80 22000
0:02 [2] zfscurr0# ipfw table fl2 list
+++ table(fl2), set(0) +++
2a02:6b8::333,6,443 45000
10.0.0.92,6,80 22000
0:02 [2] zfscurr0# ipfw add 200 count tcp from me to 78.46.89.105 80 flow 'table(fl2)'
00200 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
0:03 [2] zfscurr0# ipfw show
00200 0 0 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
65535 617 59416 allow ip from any to any
0:03 [2] zfscurr0# telnet -s 10.0.0.92 78.46.89.105 80
Trying 78.46.89.105...
..
0:04 [2] zfscurr0# ipfw show
00200 5 272 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
65535 682 66733 allow ip from any to any
Kernel changes:
* s/IPFW_TABLE_U32/IPFW_TABLE_NUMBER/
* Force "lookup <port|uid|gid|jid>" to be IPFW_TABLE_NUMBER
* Support "lookup" method for number tables
* Add number:array algorihm (i32 as key, auto-growing).
Userland changes:
* Support named tables in "lookup <tag> Table"
* Fix handling of "table(NAME,val)" case
* Support printing "number" table data.
* Rewrite interface tables to use interface indexes
Kernel changes:
* Add generic interface tracking API:
- ipfw_iface_ref (must call unlocked, performs lazy init if needed, allocates
state & bumps ref)
- ipfw_iface_add_ntfy(UH_WLOCK+WLOCK, links comsumer & runs its callback to
update ifindex)
- ipfw_iface_del_ntfy(UH_WLOCK+WLOCK, unlinks consumer)
- ipfw_iface_unref(unlocked, drops reference)
Additionally, consumer callbacks are called in interface withdrawal/departure.
* Rewrite interface tables to use iface tracking API. Currently tables are
implemented the following way:
runtime data is stored as sorted array of {ifidx, val} for existing interfaces
full data is stored inside namedobj instance (chained hashed table).
* Add IP_FW_XIFLIST opcode to dump status of tracked interfaces
* Pass @chain ptr to most non-locked algorithm callbacks:
(prepare_add, prepare_del, flush_entry ..). This may be needed for better
interaction of given algorithm an other ipfw subsystems
* Add optional "change_ti" algorithm handler to permit updating of
cached table_info pointer (happens in case of table_max resize)
* Fix small bug in ipfw_list_tables()
* Add badd (insert into sorted array) and bdel (remove from sorted array) funcs
Userland changes:
* Add "iflist" cmd to print status of currently tracked interface
* Add stringnum_cmp for better interface/table names sorting
* Switch kernel to use per-cpu counters for rules.
* Keep ABI/API.
Kernel changes:
* Each rules is now exported as TLV with optional extenable
counter block (ip_fW_bcounter for base one) and
ip_fw_rule for rule&cmd data.
* Counters needs to be explicitly requested by IPFW_CFG_GET_COUNTERS flag.
* Separate counters from rules in kernel and clean up ip_fw a bit.
* Pack each rule in IPFW_TLV_RULE_ENT tlv to ease parsing.
* Introduce versioning in container TLV (may be needed in future).
* Fix ipfw_cfg_lheader broken u64 alignment.
Userland changes:
* Use set_mask from cfg header when requesting config
* Fix incorrect read accouting in ipfw_show_config()
* Use IPFW_RULE_NOOPT flag instead of playing with _pad
* Fix "ipfw -d list": do not print counters for dynamic states
* Some small fixes
Kernel changes:
* Change dump format for dynamic states:
each state is now stored inside ipfw_obj_dyntlv
last dynamic state is indicated by IPFW_DF_LAST flag
* Do not perform sooptcopyout() for !SOPT_GET requests.
Userland changes:
* Introduce foreach_state() function handler to ease work
with different states passed by ipfw_dump_config().
Kernel changes:
* Introduce ipfw_obj_tentry table entry structure to force u64 alignment.
* Support "update-on-existing-key" "add" bahavior (TEI_FLAGS_UPDATED).
* Use "subtype" field to distingush between IPv4 and IPv6 table records
instead of previous hack.
* Add value type (vtype) field for kernel tables. Current types are
number,ip and dscp
* Fix sets mask retrieval for old binaries
* Fix crash while using interface tables
Userland changes:
* Switch ipfw_table_handler() to use named-only tables.
* Add "table NAME create [type {cidr|iface|u32} [valtype {number|ip|dscp}] ..."
* Switch ipfw_table_handler to match_token()-based parser.
* Switch ipfw_sets_handler to use new ipfw_get_config() for mask retrieval.
* Allow ipfw set X table ... syntax to permit using per-set table namespaces.
Kernel changes:
* change base TLV header to be u64 (so size can be u32).
* Introduce ipfw_obj_ctlv generc container TLV.
* Add IP_FW_XGET opcode which is now used for atomic configuration
retrieval. One can specify needed configuration pieces to retrieve
via flags field. Currently supported are
IPFW_CFG_GET_STATIC (static rules) and
IPFW_CFG_GET_STATES (dynamic states).
Other configuration pieces (tables, pipes, etc..) support is planned.
Userland changes:
* Switch ipfw(8) to use new IP_FW_XGET for rule listing.
* Split rule listing code get and show pieces.
* Make several steps forward towards libipfw:
permit printing states and rules(paritally) to supplied buffer.
do not die on malloc/kernel failure inside given printing functions.
stop assuming cmdline_opts is global symbol.
Kernel changes:
* Add IP_FW_OBJ_FLUSH opcode (flush table based on its name/set)
* Add IP_FW_OBJ_DUMP opcode (dumps table data based on its names/set)
* Add IP_FW_OBJ_LISTSIZE / IP_FW_OBJ_LIST opcodes (get list of kernel tables)
Userland changes:
* move tables code to separate tables.c file
* get rid of tables_max
* switch "all"/list handling to new opcodes
Kernel-side changelog:
* Split general tables code and algorithm-specific table data.
Current algorithms (IPv4/IPv6 radix and interface tables radix) moved to
new ip_fw_table_algo.c file.
Tables code now supports any algorithm implementing the following callbacks:
+struct table_algo {
+ char name[64];
+ int idx;
+ ta_init *init;
+ ta_destroy *destroy;
+ table_lookup_t *lookup;
+ ta_prepare_add *prepare_add;
+ ta_prepare_del *prepare_del;
+ ta_add *add;
+ ta_del *del;
+ ta_flush_entry *flush_entry;
+ ta_foreach *foreach;
+ ta_dump_entry *dump_entry;
+ ta_dump_xentry *dump_xentry;
+};
* Change ->state, ->xstate, ->tabletype fields of ip_fw_chain to
->tablestate pointer (array of 32 bytes structures necessary for
runtime lookups (can be probably shrinked to 16 bytes later):
+struct table_info {
+ table_lookup_t *lookup; /* Lookup function */
+ void *state; /* Lookup radix/other structure */
+ void *xstate; /* eXtended state */
+ u_long data; /* Hints for given func */
+};
* Add count method for namedobj instance to ease size calculations
* Bump ip_fw3 buffer in ipfw_clt 128->256 bytes.
* Improve bitmask resizing on tables_max change.
* Remove table numbers checking from most places.
* Fix wrong nesting in ipfw_rewrite_table_uidx().
* Add IP_FW_OBJ_LIST opcode (list all objects of given type, currently
implemented for IPFW_OBJTYPE_TABLE).
* Add IP_FW_OBJ_LISTSIZE (get buffer size to hold IP_FW_OBJ_LIST data,
currenly implemented for IPFW_OBJTYPE_TABLE).
* Add IP_FW_OBJ_INFO (requests info for one object of given type).
Some name changes:
s/ipfw_xtable_tlv/ipfw_obj_tlv/ (no table specifics)
s/ipfw_xtable_ntlv/ipfw_obj_ntlv/ (no table specifics)
Userland changes:
* Add do_set3() cmd to ipfw2 to ease dealing with op3-embeded opcodes.
* Add/improve support for destroy/info cmds.
* Add namedobject set-aware api capable of searching/allocation objects by their name/idx.
* Switch tables code to use string ids for configuration tasks.
* Change locking model: most configuration changes are protected with UH lock, runtime-visible are protected with both locks.
* Reduce number of arguments passed to ipfw_table_add/del by using separate structure.
* Add internal V_fw_tables_sets tunable (set to 0) to prepare for set-aware tables (requires opcodes/client support)
* Implement typed table referencing (and tables are implicitly allocated with all state like radix ptrs on reference)
* Add "destroy" ipfw(8) using new IP_FW_DELOBJ opcode
Namedobj more detailed:
* Blackbox api providing methods to add/del/search/enumerate objects
* Statically-sized hashes for names/indexes
* Per-set bitmask to indicate free indexes
* Separate methods for index alloc/delete/resize
Basically, there should not be any user-visible changes except the following:
* reducing table_max is not supported
* flush & add change table type won't work if table is referenced
Sponsored by: Yandex LLC
Add `flags` u16 field to the hole in ipfw_table_xentry structure.
Kernel has been guessing address family for supplied record based
on xent length size.
Userland, however, has been getting fixed-size ipfw_table_xentry structures
guessing address family by checking address by IN6_IS_ADDR_V4COMPAT().
Fix this behavior by providing specific IPFW_TCF_INET flag for IPv4 records.
PR: bin/189471
Submitted by: Dennis Yusupoff <dyr@smartspb.net>
MFC after: 2 weeks
Print warning for IPv4 address strings which are valid in
inet_aton() but not valid in inet_pton(). (1)
Found by: Özkan KIRIK <ozkan.kirik@gmail.com>
Submitted by: Ian Smith <smithi@nimnet.asn.au> (1)
MFC after: 2 weeks
Sponsored by: Yandex LLC
Setting DSCP support is done via O_SETDSCP which works for both
IPv4 and IPv6 packets. Fast checksum recalculation (RFC 1624) is done for IPv4.
Dscp can be specified by name (AFXY, CSX, BE, EF), by value
(0..63) or via tablearg.
Matching DSCP is done via another opcode (O_DSCP) which accepts several
classes at once (af11,af22,be). Classes are stored in bitmask (2 u32 words).
Many people made their variants of this patch, the ones I'm aware of are
(in alphabetic order):
Dmitrii Tejblum
Marcelo Araujo
Roman Bogorodskiy (novel)
Sergey Matveichuk (sem)
Sergey Ryabin
PR: kern/102471, kern/121122
MFC after: 2 weeks
for an uninitialized variable.
unused parameters and variables are annotated with
(void)foo; /* UNUSED */
instead of __unused, because this code needs to build
also on linux and windows.
net.inet.ip.fw.tables_max is now read-write.
- Bump IPFW_TABLES_MAX to 65535
Default number of tables is still 128
- Remove IPFW_TABLES_MAX from ipfw(8) code.
Sponsored by Yandex LLC
Approved by: kib(mentor)
MFC after: 2 weeks
- Add support for IPv6 and interface extended tables
- Make number of tables to be loader tunable in range 0..65534.
- Use IP_FW3 opcode for all new extended table cmds
No ABI changes are introduced. Old userland will see valid tables for
IPv4 tables and no entries otherwise. Flush works for any table.
IP_FW3 socket option is used to encapsulate all new opcodes:
/* IP_FW3 header/opcodes */
typedef struct _ip_fw3_opheader {
uint16_t opcode; /* Operation opcode */
uint16_t reserved[3]; /* Align to 64-bit boundary */
} ip_fw3_opheader;
New opcodes added:
IP_FW_TABLE_XADD, IP_FW_TABLE_XDEL, IP_FW_TABLE_XGETSIZE, IP_FW_TABLE_XLIST
ipfw(8) table argument parsing behavior is changed:
'ipfw table 999 add host' now assumes 'host' to be interface name instead of
hostname.
New tunable:
net.inet.ip.fw.tables_max controls number of table supported by ipfw in given
VNET instance. 128 is still the default value.
New syntax:
ipfw add skipto tablearg ip from any to any via table(42) in
ipfw add skipto tablearg ip from any to any via table(4242) out
This is a bit hackish, special interface name '\1' is used to signal interface
table number is passed in p.glob field.
Sponsored by Yandex LLC
Reviewed by: ae
Approved by: ae (mentor)
MFC after: 4 weeks
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.
Obtained from: David Dolson at Sandvine Incorporated
(original version for ipfw fwd IPv6 support)
Sponsored by: Sandvine Incorporated
PR: bin/117214
MFC after: 4 weeks
Approved by: re (kib)
possible to organize subroutines with rules.
The "call" action saves the current rule number in the internal
stack and rules processing continues from the first rule with
specified number (similar to skipto action). If later a rule with
"return" action is encountered, the processing returns to the first
rule with number of "call" rule saved in the stack plus one or higher.
Submitted by: Vadim Goncharov
Discussed by: ipfw@, luigi@
"globalport" option for multiple NAT instances.
If ipfw rule contains "global" keyword instead of nat_number, then
for each outgoing packet ipfw_nat looks up translation state in all
configured nat instances. If an entry is found, packet aliased
according to that entry, otherwise packet is passed unchanged.
User can specify "skip_global" option in NAT configuration to exclude
an instance from the lookup in global mode.
PR: kern/157867
Submitted by: Alexander V. Chernikov (previous version)
Tested by: Eugene Grosbein
the "sockarg" ipfw option matches packets associated to
a local socket and with a non-zero so_user_cookie value.
The value is made available as tablearg, so it can be used
as a skipto target or pipe number in ipfw/dummynet rules.
Code by Paul Joe, manpage by me.
Submitted by: Paul Joe
MFC after: 1 week
ipfw add 100 allow ip from { 1.2.3.4 or 5.6.7.8 }
(note that the above example could be better written as
ipfw add 100 allow dst-ip 1.2.3.4,5.6.7.8
Submitted by: Riccardo Panicucci
of ip->ip_tos) in a table. This can be useful to direct traffic to
different pipes/queues according to the DSCP of the packet, as follows:
ipfw add 100 queue tablearg lookup dscp 3 // table 3 maps dscp->queue
This change is a no-op (but harmless) until the two-line kernel
side is committed, which will happen shortly.
and tested over the past two months in the ipfw3-head branch. This
also happens to be the same code available in the Linux and Windows
ports of ipfw and dummynet.
The major enhancement is a completely restructured version of
dummynet, with support for different packet scheduling algorithms
(loadable at runtime), faster queue/pipe lookup, and a much cleaner
internal architecture and kernel/userland ABI which simplifies
future extensions.
In addition to the existing schedulers (FIFO and WF2Q+), we include
a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new,
very fast version of WF2Q+ called QFQ.
Some test code is also present (in sys/netinet/ipfw/test) that
lets you build and test schedulers in userland.
Also, we have added a compatibility layer that understands requests
from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries,
and replies correctly (at least, it does its best; sometimes you
just cannot tell who sent the request and how to answer).
The compatibility layer should make it possible to MFC this code in a
relatively short time.
Some minor glitches (e.g. handling of ipfw set enable/disable,
and a workaround for a bug in RELENG_7's /sbin/ipfw) will be
fixed with separate commits.
CREDITS:
This work has been partly supported by the ONELAB2 project, and
mostly developed by Riccardo Panicucci and myself.
The code for the qfq scheduler is mostly from Fabio Checconi,
and Marta Carbone and Francesco Magno have helped with testing,
debugging and some bug fixes.
lookup {dst-ip|src-ip|dst-port|src-port|uid|jail} N
which searches the specified field in table N and sets tablearg
accordingly.
With dst-ip or src-ip the option replicates two existing options.
When used with other arguments, the option can be useful to
quickly dispatch traffic based on other fields.
Work supported by the Onelab project.
MFC after: 1 week
it seems that now it is necessary for 'forward' to work outside lo0.
The bug (and fix) was reported on 8.0. This patch probably applies
to RELENG_7 as well.
It seems that 'pf' has a similar bug.
Submitted by: Lytochkin Boris
MFC after: 3 days
