AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default.
Comments and suggestions by: grehan, dteske, jilles
MFC after: 1 month
3-clause BSD license as specified by Oracle America, Inc. in 2010.
This license change was approved by Wim Coekaerts, Senior Vice
President, Linux and Virtualization at Oracle Corporation.
when there is an invalid character in the output codeset while it is
valid in the input. However, POSIX requires iconv() to perform an
implementation-defined conversion on the character. So, Citrus iconv converts
such a character to a special character which means it is invalid in the
output codeset.
This is not a problem in most cases but some software like libxml2 depends
on GNU's behavior to determine if a character is output as-is or another form
such as a character entity (&#NNN;).
FreeBSD systems usually implemented this as a third party module and
our implementation hasn't played as nicely with the old way as it could
have.
To that end:
* Rename the iconv* symbols in libc.so.7 to have a __bsd_ prefix.
* Provide .symver compatability with existing 10.x+ binaries that
referenced the iconv symbols. All existing binaries should work.
* Like on Linux/glibc systems, add a libc_nonshared.a to the ldscript
at /usr/lib/libc.so.
* Move the "iconv*" wrapper symbols to libc_nonshared.a
This should solve the runtime ambiguity about which symbols resolve
to where. If you compile against the iconv in libc, your runtime
dependencies will be unambiguous.
Old 9.x libraries and binaries will always resolve against their
libiconv.so.3 like they did on 9.x. They won't resolve against libc.
Old 10.x binaries will be satisified by the .symver helpers.
This should allow ports to selectively compile against the libiconv
port if needed and it should behave without ambiguity now.
Discussed with: kib
good. This caused libc to spoof the ports libiconv namespace and
provide a colliding libiconv.so.3 to fool rtld. This should have
been removed some time ago.
in net, to avoid compatibility breakage for no sake.
The future plan is to split most of non-kernel parts of
pfvar.h into pf.h, and then make pfvar.h a kernel only
include breaking compatibility.
Discussed with: bz
newvers.sh. Pass it in from include/Makefile. If it isn't passed in,
fall back to the old logic of using dirname $0.
Using dirname $0 does not yield the path to the script if it was
sourced in from another script in another directory; you end up with
the parent script's path. That was causing newvers.sh to look one
level below the FreeBSD src/ directory when building osreldate.h and it
may find something like a git or svn repo there that has nothing to do
with FreeBSD.
PR: 174422
Approved by: re ()
MFC after: 2 weeks
This would cause detection of old versions of SVN to cause fatal errors
instead of being caught and handled, which would make the build fail if
the tree had been checked out with an older version of SVN (e.g. 1.6).
Discussed with: gjb
Approved by: re (marius)
may come in from the environment and reflect the user's interactive shell.
Using bare "sh" is the dominant pattern in existing makefiles.
MFC this together with r255775.
Approved by: re ()
MFC after: 2 weeks
than launching the script directly and relying on #! to launch the shell.
This avoids problems when the source is mounted with the noexec flag.
MFC this together with r255775.
Approved by: re (kib)
MFC after: 2 weeks
newvers.sh into a temporary subshell with inline make rules.
Using a separate script fixes a variety of problems, including establishing
the correct dependencies in the makefiles. It also eliminates a problem
with the way newvers.sh uses `realpath $0`, because $0 expands differently
within a script sourced into a rule in a makefile depending on the version
of make and of /bin/sh being used. The latter can cause build breakage in a
cross-build environment, and can also make it difficult to compile 10.0 on
older pre-10.0 systems.
PR: 160646 174422
Submitted by: Garrett Cooper <yaneurabeya@gmail.com>
Approved by: re (gjb)
MFC after: 2 weeks
hrs@ provided this verison of the patch and showed me where all the needed
changes were to be made outside of gpioctl.c
Approved by: re (hrs)
MFC after: 2 weeks
function, but returns directory file descriptor instead of closing it.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by: Google Summer of Code 2013
I removed functionality not proposed for POSIX in Austin group issue #411.
A man page (my own) and test cases will follow in later commits.
PR: 176233
Submitted by: Jukka Ukkonen
extensions and also tried to be link time compatible with ports libiconv.
This splits that functionality and enables the parts that shouldn't
interfere with the port by default.
WITH_ICONV (now on by default) - adds iconv.h, iconv_open(3) etc.
WITH_LIBICONV_COMPAT (off by default) adds the libiconv_open etc API, linker
symbols and even a stub libiconv.so.3 that are good enough to be able
to 'pkg delete -f libiconv' on a running system and reasonably expect it
to work.
I have tortured many machines over the last few days to try and reduce
the possibilities of foot-shooting as much as I can. I've successfully
recompiled to enable and disable the libiconv_compat modes, ports that use
libiconv alongside system iconv etc. If you don't enable the
WITH_LIBICONV_COMPAT switch, they don't share symbol space.
This is an extension of behavior on other system. iconv(3) is a standard
libc interface and libiconv port expects to be able to run alongside it on
systems that have it.
Bumped osreldate.
but ACM formula we use have internal state (and return value) in the
[1, 0x7ffffffe] range, so our RAND_MAX (0x7fffffff) is never reached
because it is off by one, zero is not reached too.
Correct both RAND_MAX and rand(3) return value, shifting last one
to the 0 by 1 subtracted, resulting POSIXed [0, 0x7ffffffd(=new RAND_MAX)]
range.
2) Add a checks for not overflowing on too big seeds. It may happens on
the machines, where sizeof(unsigned int) > 32 bits.
Reviewed by: bde [1]
MFC after: 2 weeks
a macro with parameters. Remove a __DECONST hack and add consts instead
for gnu libiconv API compatability. This makes it work with things like
devel/boost-libs that expects to use "iconv" as though it were a pointer.
- Reconnect with some minor modifications, in particular now selsocket()
internals are adapted to use sbintime units after recent'ish calloutng
switch.
device names "md" or "md[0-9]*" and a "file" option are specified in
/etc/fstab like this:
md none swap sw,file=/swap.bin 0 0
- Add GBDE/GELI encrypted swap space specification support, which
rc.d/encswap supported. The /etc/fstab lines are like the following:
/dev/ada1p1.bde none swap sw 0 0
/dev/ada1p2.eli none swap sw 0 0
.eli devices accepts aalgo, ealgo, keylen, and sectorsize as options.
swapctl(8) can understand an encrypted device in the command line
like this:
# swapctl -a /dev/ada2p1.bde
- "-L" flag is added to support "late" option to defer swapon until
rc.d/mountlate runs.
- rc.d script change:
rc.d/encswap -> removed
rc.d/addswap -> just display a warning message if $swapfile is defined
rc.d/swap1 -> renamed to rc.d/swap
rc.d/swaplate -> newly added to support "late" option
These changes alleviate a race condition between device creation/removal
and swapon/swapoff.
MFC after: 1 week
Reviewed by: wblock (manual page)
implementations visible for use by applications. The functions $F that
are now weak symbols are:
allocm, calloc, dallocm, free, malloc, malloc_usable_size,
nallocm, posix_memalign, rallocm, realloc, sallocm
The non-weak implementations of $F are exported as __$F.
Submitted by: stevek@juniper.net
Reviewed by: jasone@, kib@
Approved by: jasone@ (jemalloc)
Obtained from: juniper Networks, Inc
It turns out that in C++11, char16_t and char32_t are built-in types;
language keywords. Just fix this by putting traditional _*_T_DECLARED
blocks around the definitions. We'll just predefine these in
<sys/_types.h>.
This also opens up the possibility to define char16_t in other header
files, if ever needed (e.g. if we would gain a <ctype.h> for
char16_t/char32_t).
The <uchar.h> header, part of C11, adds a small number of utility
functions for 16/32-bit "universal" characters, which may or may not be
UTF-16/32. As our wchar_t is already ISO 10646, simply add light-weight
wrappers around wcrtomb() and mbrtowc().
While there, also add (non-yet-standard) _l functions, similar to the
ones we already have for the other locale-dependent functions.
Reviewed by: theraven
The pipe2() function is similar to pipe() but allows setting FD_CLOEXEC and
O_NONBLOCK (on both sides) as part of the function.
If p points to two writable ints, pipe2(p, 0) is equivalent to pipe(p).
If the pointer is not valid, behaviour differs: pipe2() writes into the
array from the kernel like socketpair() does, while pipe() writes into the
array from an architecture-specific assembler wrapper.
Reviewed by: kan, kib
By using __has_extension(c_generic_selections), we can explicitly test
whether we're dealing with a version of Clang that supports _Generic().
That way we can use the improved <tgmath.h> code, even when not using
-std=c11. This massively reduces the compilation time when invoking
these functions.
This theoretically allows a compiler to optimize (parts of) the array
away if unused.
While there, make the array size implicit and use a _Static_assert() to
ensure that the definition matches up with the number of elements in the
list.
routines provide write-only stdio FILE objects that store their data in a
dynamically allocated buffer. They are a string builder interface somewhat
akin to a completely dynamic sbuf.
Reviewed by: bde, jilles (earlier versions)
MFC after: 1 month
values with those in <sys/time.h>. Otherwise, if a program includes
<time.h> before <sys/time.h>, the CLOCK_PROCESS_CPUTIME_ID macro never
gets defined.
Reviewed by: davidxu
X-MFC-With: 239347
NetBSD's. This output size limited versions of vis and unvis functions
as well as a set of vis variants that allow arbitrary characters to be
specified for encoding.
Finally, MIME Quoted-Printable encoding as described in RFC 2045 is
supported.
This adds two features:
* uid_from_user() and gid_from_group() as the reverse of user_from_uid()
and groups_from_gid().
* pwcache_userdb() and pwcache_groupdb() which allow alternative lookup
functions to be used. For example lookups from passwd and group
databases in a non-standard location.
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.
In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.
This is not targeted for MFC.
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.
In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.
This is not targeted for MFC.
After further discussion, instead of pretending to use
uid_t and gid_t as upstream Solaris and linux try to, we
are better using u_int, which is in fact what the code
can handle and best approaches the range of values used
by uid and gid.
Discussed with: bde
Reviewed by: bde
- Evaluate the memory order argument in atomic_fetch_*_explicit macros.
- Implement atomic_store_explicit using atomic_exchange_explicit instead
of a plain assignment.
Reviewed by: theraven
MFC after: 2 weeks
The attempt to merge changes from the linux libtirpc caused
rpc.lockd to exit after startup under unclear conditions.
After many hours of selective experiments and inconsistent results
the conclusion is that it's better to just revert everything and
restart in a future time with a much smaller subset of the
changes.
____
MFC after: 3 days
Reported by: David Wolfskill
Tested by: David Wolfskill
- Replace do-while statements with void expressions.
- Wrap __asm statements in statement expressions.
- Make the macros function-like:
- Evaluate all arguments exactly once.
- Make sure there's a sequence point between evaluation of the arguments
and the function body. Arguments should be evaluated before any memory
barriers.
- Fix use of __atomic_is_lock_free built-in. It requires the address of
an atomic variable as second argument. Use this built-in on clang as
well because clang's __c11_atomic_is_lock_free only takes the size of the
variable into account.
- In atomic_exchange_explicit put the barrier before instead of after the
__sync_lock_test_and_set call.
Reviewed by: theraven
reside, and move there ipfw(4) and pf(4).
o Move most modified parts of pf out of contrib.
Actual movements:
sys/contrib/pf/net/*.c -> sys/netpfil/pf/
sys/contrib/pf/net/*.h -> sys/net/
contrib/pf/pfctl/*.c -> sbin/pfctl
contrib/pf/pfctl/*.h -> sbin/pfctl
contrib/pf/pfctl/pfctl.8 -> sbin/pfctl
contrib/pf/pfctl/*.4 -> share/man/man4
contrib/pf/pfctl/*.5 -> share/man/man5
sys/netinet/ipfw -> sys/netpfil/ipfw
The arguable movement is pf/net/*.h -> sys/net. There are
future plans to refactor pf includes, so I decided not to
break things twice.
Not modified bits of pf left in contrib: authpf, ftp-proxy,
tftp-proxy, pflogd.
The ipfw(4) movement is planned to be merged to stable/9,
to make head and stable match.
Discussed with: bz, luigi
__BEGIN_DECLS and __END_DECLS in cdefs.h take care of the
__cplusplus mangling issues so most of the definitions
were redundant.
In the few places where they were not redundant we should
use BSD style instead of the guards used upstream.
Reported by: Yuri Pankov
C++ mangling will cause trouble with variables like __rpc_xdr
in xdr.h so rename this to XDR.
While here add proper C++ guards to RPC headers.
PR: 137443
MFC after: 2 weeks
We especifically ignored the glibc compatibility changes
but this should help interaction with Solaris and Linux.
____
Fixed infinite loop in svc_run()
author Steve Dickson
Tue, 10 Jun 2008 12:35:52 -0500 (13:35 -0400)
Fixed infinite loop in svc_run()
____
__rpc_taddr2uaddr_af() assumes the netbuf to always have a
non-zero data. This is a bad assumption and can lead to a
seg-fault. This patch adds a check for zero length and returns
NULL when found.
author Steve Dickson
Mon, 27 Oct 2008 11:46:54 -0500 (12:46 -0400)
____
Changed clnt_spcreateerror() to return clearer
and more concise error messages.
author Steve Dickson
Thu, 20 Nov 2008 08:55:31 -0500 (08:55 -0500)
____
Converted all uid and gid variables of the type uid_t and gid_t.
author Steve Dickson
Wed, 28 Jan 2009 12:44:46 -0500 (12:44 -0500)
____
libtirpc: set r_netid and r_owner in __rpcb_findaddr_timed
These fields in the rpcbind GETADDR call are being passed uninitialized
to CLNT_CALL. In the case of x86_64 at least, this usually leads to a
segfault. On x86, it sometimes causes segfaults and other times causes
garbage to be sent on the wire.
rpcbind generally ignores the r_owner field for calls that come in over
the wire, so it really doesn't matter what we send in that slot. We just
need to send something. The reference implementation from Sun seems to
send a blank string. Have ours follow suit.
author Jeff Layton
Fri, 13 Mar 2009 11:44:16 -0500 (12:44 -0400)
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.
author Jeff Layton
Fri, 13 Mar 2009 11:47:36 -0500 (12:47 -0400)
Obtained from: Bull GNU/Linux NFSv4 Project
MFC after: 3 weeks
In addition to testing against cxx_atomic, we must check c_atomic. The
former is only set when building C++ code. Also use __has_extension
instead of __has_feature. This allows us to use the atomics outside of
C11.
Reported by: Ariane van der Steldt <ariane stack nl>
PR: threads/170073
This is required for ARM EABI. Section 7.1.1 of the Procedure Call for the
ARM Architecture (AAPCS) defines wchar_t as either an unsigned int or an
unsigned short with the former preferred.
Because of this requirement we need to move the definition of __wchar_t to
a machine dependent header. It also cleans up the macros defining the limits
of wchar_t by defining __WCHAR_MIN and __WCHAR_MAX in the same machine
dependent header then using them to define WCHAR_MIN and WCHAR_MAX
respectively.
Discussed with: bde
thing it was still used for was to set the "global default" password
hash. Since the stock auth.conf contained nothing but comments, the
global default was actually the first algorithm in crypt(3)'s list,
which happens to be DES; I take the fact that nobody noticed as proof
that it was not used outside of crypt(3).
The only other use in our tree was in the Kerberos support code in
in tinyware's passwd(1). I removed that code in an earlier commit;
it would not have compiled anyway, as it only supported Kerberos IV.
The auth_getval() function is now a stub that always returns NULL,
which has the same effect as a functional auth_getval() with an
empty auth.conf.
MFC after: 3 weeks
Introduce dirfd() libc exported symbol replacing macro with same name,
preserve _dirfd() macro for internal use.
Replace dirp->dd_fd with dirfd() call. Avoid using dirfd as variable
name to prevent shadowing global symbol.
Sponsored by: Google Summer Of Code 2011
Since ino_t size is about to change to 64-bits, replace ino_t used in
dump protocol definition with 32-bit dump_ino_t to preserve backward
compatibility. At some point, it may be necessary to use spare fields
in struct in order to fully support 64-bit inode numbers.
Sponsored by: Google Summer of Code 2011
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
a c11 prefix to disambiguate them from the one provided by GCC.
Note: Clang 3.1 also supports the GCC builtins for libstdc++ 4.7 compatibility,
but I don't recommend using them because they are very poorly designed.
MFC after: 2 weeks
prior to 3.0.0 release) as contrib/jemalloc, and integrate it into libc.
The code being imported by this commit diverged from
lib/libc/stdlib/malloc.c in March 2010, which means that a portion of
the jemalloc 1.0.0 ChangeLog entries are relevant, as are the entries
for all subsequent releases.
would not compile anymore, due to plain 'inline' keywords. Fix this by
using __inline instead.
Reported by: Jia-Shiun Li <jiashiun@gmail.com>
Discussed with: theraven
The lang/gcc* ports patch headers where they think something is
non-standard. These patched headers override the system headers which means
you have to rebuild these ports whenever you do installworld to make sure
they contain the latest changes.
- Address performance regressions encountered by das@ by caching per-thread
data in TLS where available.
- Add a __NO_TLS flag to cdefs.h to indicate where not available.
- Reorganise the xlocale.h definitions into xlocale/*.h so that they can be
included from multiple places.
- Export the POSIX2008 subset of xlocale when POSIX2008 says it should be
exported, independently of whether xlocale.h is included.
- Fix the bug where programs using ctype functions always assumed ASCII unless
recompiled.
- Fix some style(9) violations.
Reviewed by: brooks (mentor)
Approved by: dim (mentor)
builtins, rather than the __asm hack. Somehow I missed the existence of this
builtin originally and only noticed that it was there when I went to implement
it...
Note: Trunk clang now has support for (most of) the C[++]11 atomics stuff.
Please test!
Approved by: brooks (mentor)
Plain 'va_list' in this header seems to cause troubles with non-base GCC
which creates and uses "tortured" versions of some sysem header files
including stdio.h (installed in a private 'include-fixed' directory).
Reviewed by: theraven
X-MFC with: r227753
The C11 folks reinvented the wheel by introducing an aligned version of
malloc(3) called aligned_alloc(3), instead of posix_memalign(3). Instead
of returning the allocation by reference, it returns the address, just
like malloc(3).
Reviewed by: jasone@
I was thinking by myself, if the new code doesn't work with GCC 4.2, why
not simply turn it into an efficient version for C11 compilers? By
changing the code to use _Generic() directly in that case, I can build
the tgmath regression test in a matter of milliseconds with Clang,
instead of the 8 seconds it used to take.
So by the time C11 becomes the default, it will pick up the new code
automatically. And now I will refrain from making more changes to
<tgmath.h>.
Instead of using an exponential number of cases with respect to the
number of arguments, this version only uses a linear number.
Unfortunately, it works with Clang, GCC 4.6 and GCC 4.7, but not GCC
4.2. Therefore, leave it commented out.
It turns out our GCC has quite an interesting bug:
typeof(1.0fi) != float _Complex
typeof((float _Complex)1.0fi) != float _Complex
typeof((float _Complex)1.0i) == float _Complex
In other words: if casting to an equal size, GCC seems to take a
shortcut. By casting down from a double to a float, GCC doesn't take
this shortcut, yielding the proper type.
To prevent foot-shooting, add a _Static_assert() to guarantee that
_Complex_I is always a float _Complex. I'm not going to MFC this part of
the diff.
MFC after: 2 weeks
The macro construction used now, is almost identical to the code
provided in C11 proposal N1404. This new version doesn't seem to
introduce any regressions according to the regression test in tools/,
but still seems to malfunction with Clang on certain aspects.
The new code does work successfully with GCC 4.2, 4.6 and 4.7. With 4.7,
it also works when __generic() is implemented on top of _Generic().
Discussed with: stefanf
There is no way one could possibly use this header file in combination
with C++ code. The problem is that in C11 the `noreturn' macro expands
to the `_Noreturn' function specifier, while in C++11 the `noreturn'
keyword is an attribute.
So in C11 you have to write:
noreturn void exit(int status);
While in C++11 you have to write:
[[noreturn]] void exit(int status);
It is impossible to #define noreturn for C++ in such a way that it
allows both conventions.
By intentionally breaking this header this way, we prevent people from
using this header in their C++<11 sources.
The development version of GCC also supports an atomics interface
similar to Clang's. Change the header file to work as follows:
- __CLANG_ATOMICS: Use Clang's new atomics interface,
- __GNUC_ATOMICS: Use GCC's new atomics interface,
- else: fall back to GCC's __sync interface.
Even though _Static_assert() is pretty robust for C code, it cannot work
correctly with C++ code. This is due to the fact that C++ template
parameters may contain commas that are not enclosed in parentheses. For
example:
static_assert(foo<int, int>::bar == baz, "...");
This causes _Static_assert to be called with an excessive number of
parameters. If you want to use static_assert in C++, just use a C++11
compiler.
Reported on: current@, ports@
P_tmpdir [OB XSI] Default directory prefix for tempnam().
This macro is used in a lot of places in legacy applications,
and is why we see a lot of programs written for e.g. Linux
store volatile temporary files in /var/tmp and not /tmp.
MFC after: 2 months
- Make atomic_init() work for GCC, as assigning to structs doesn't work.
- Fix misplaced parenthesis in atomic_is_lock_free() for GCC.
- Make atomic_compare_exchange_strong() for GCC return the proper
boolean value, whether object == expected.
- Fix argument passing in atomic_exchange_explicit() for GCC.
Even though these header files make little sense to me, they are part of
the standard. By including these header files, you can simply use
`alignas', `alignof' and `noreturn' instead of the underscore-prefixed
versions.
tested) with clang and gcc, and more efficiently with clang+a big out-of-tree
diff that I need to commit soon (once it's been tidied and reviewed a bit).
Large portions by: ed
Reviewed by: ed
Approved by: dim (mentor)
Add an API for alerting internal libc routines to the presence of
"unsafe" paths post-chroot, and use it in ftpd. [11:07]
Fix a buffer overflow in telnetd. [11:08]
Make pam_ssh ignore unpassphrased keys unless the "nullok" option is
specified. [11:09]
Add sanity checking of service names in pam_start. [11:10]
Approved by: so (cperciva)
Approved by: re (bz)
Security: FreeBSD-SA-11:06.bind
Security: FreeBSD-SA-11:07.chroot
Security: FreeBSD-SA-11:08.telnetd
Security: FreeBSD-SA-11:09.pam_ssh
Security: FreeBSD-SA-11:10.pam
As C1X is close to being released, there is no need to wrap around a
feature that is already part of C90. Most of these files already use
`const' in different placed as well.
typedef bool. Due to macro expansion it seemed better to use a
typedef for kernel consumers (specifically ofed won't compile
without more changes if a define is used).
- <stdbool.h> should also not re-define bool/true/false if they are
defined by <sys/types.h>. It would probably be a programming error
to define _KERNEL for user-space code, but downstream consumers
like Isilon have already been including <stdbool.h> in kernel
sources, and this protects that usage.
- sizeof(_Bool) is not necessarily the same as sizeof(int), so kernel
modules should be rebuild with this change. Bump __FreeBSD_version.
MFC after: 2 weeks
Sponsored by: Isilon Systems, LLC
identifier reserved for the implementation in C99 and earlier so there is
no sensible reason for introducing yet another reserved identifier when we
could just use the one C1x uses.
Approved by: brooks (mentor)
__noreturn macro and modify the other exiting functions to use it.
The __noreturn macro, unlike __dead2, must be used BEFORE the function.
This is in line with the C and C++ specifications that place _Noreturn (c1x)
and [[noreturn]] (C++11) in front of the functions. As with __dead2, this
macro falls back to using the GCC attribute.
Unfortunately, clang currently sets the same value for the C version macro
in C99 and C1x modes, so these functions are hidden by default. At some
point before 10.0, I need to go through the headers and clean up the C1x /
C++11 visibility.
Reviewed by: brooks (mentor)
load of _l suffixed versions of various standard library functions that use
the global locale, making them take an explicit locale parameter. Also
adds support for per-thread locales. This work was funded by the FreeBSD
Foundation.
Please test any code you have that uses the C standard locale functions!
Reviewed by: das (gdtoa changes)
Approved by: dim (mentor)
implement a deprecated FPU control interface in addition to the
standard one. To make this clearer, further deprecate ieeefp.h
by not declaring the function prototypes except on architectures
that implement them already.
Currently i386 and amd64 implement the ieeefp.h interface for
compatibility, and for fp[gs]etprec(), which doesn't exist on
most other hardware. Powerpc, sparc64, and ia64 partially implement
it and probably shouldn't, and other architectures don't implement it
at all.
{readline,history}.h are in /usr/include/edit so as to not conflict with
the GNU libreadline versions. To use the libedit readline(3) one should
add "-I/usr/include/edit" to their Makefile
(spelled "-I${DESTDIR}/${INCLUDEDIR}/edit" within the FreeBSD source tree).
* Enable its use in the BSD licensed utilities that support readline(3).
* To make it easier to sync libedit development with NetBSD, histedit.h
is moved into libedit's directory as history shows shown we keep merging
it into that location.
Obtained from: NetBSD
Sponsored by: Juniper Networks
Add new RAID GEOM class, that is going to replace ataraid(4) in supporting
various BIOS-based software RAIDs. Unlike ataraid(4) this implementation
does not depend on legacy ata(4) subsystem and can be used with any disk
drivers, including new CAM-based ones (ahci(4), siis(4), mvs(4), ata(4)
with `options ATA_CAM`). To make code more readable and extensible, this
implementation follows modular design, including core part and two sets
of modules, implementing support for different metadata formats and RAID
levels.
Support for such popular metadata formats is now implemented:
Intel, JMicron, NVIDIA, Promise (also used by AMD/ATI) and SiliconImage.
Such RAID levels are now supported:
RAID0, RAID1, RAID1E, RAID10, SINGLE, CONCAT.
For any all of these RAID levels and metadata formats this class supports
full cycle of volume operations: reading, writing, creation, deletion,
disk removal and insertion, rebuilding, dirty shutdown detection
and resynchronization, bad sector recovery, faulty disks tracking,
hot-spare disks. For Intel and Promise formats there is support multiple
volumes per disk set.
Look graid(8) manual page for additional details.
Co-authored by: imp
Sponsored by: Cisco Systems, Inc. and iXsystems, Inc.
it possible for the kernel to track login class the process is assigned to,
which is required for RCTL. This change also make setusercontext(3) call
setloginclass(2) and makes it possible to retrieve current login class using
id(1).
Reviewed by: kib (as part of a larger patch)
* Some values changed in POSIX.1-2001; provide the former value if a program
requests compliance to an earlier version of POSIX. [1]
* Add missing _POSIX_CLOCKRES_MIN constant. This is a maximum value but
otherwise works the same as the minimum values.
PR: standards/104743
Submitted by: bde [1] (not exact #ifdefs, but the values)
MFC after: 2 weeks
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
calling thread's unique integral ID, which is similar to AIX function of
the same name. Bump __FreeBSD_version to note its introduction.
Reviewed by: kib
__assert() is called when an assertion fails. After printing an error
message, it will call abort(). abort() never returns, hence it has the
__dead2 attribute. Also add this attribute to __assert().
MFC after: 3 weeks
- Provide function prototype for nlm_syscall
- Don't assign a variable from the stack to a global var[1]
- Remove unused vars
Found by: clang static analyser [1]
Reviewed by: dfr
I've noticed various terminal emulators that need to obtain a sane
default termios structure use very complex `hacks'. Even though POSIX
doesn't provide any functionality for this, extend our termios API with
cfmakesane(3), which is similar to the commonly supported cfmakeraw(3),
except that it fills the termios structure with sane defaults.
Change all code in our base system to use this function, instead of
depending on <sys/ttydefaults.h> to provide TTYDEF_*.
to amd64, i386, and pc98. The headers are installed to /usr/include/x86
during an installworld, and an 'x86' symlink is created for kernel builds
similar to 'machine' so that the headers can be included as <x86/foo.h>.
Reviewed by: imp
functions set or get pthread_rwlock type, current supported types are:
PTHREAD_RWLOCK_PREFER_READER_NP,
PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP,
PTHREAD_RWLOCK_PREFER_WRITER_NP,
default is PTHREAD_RWLOCK_PREFER_WRITER_NONCECURSIVE_NP, this maintains
binary compatible with old code.
same null value, the code can not distinguish between them, to
fix the problem, now a destroyed object is assigned to a non-null
value, and it will be rejected by some pthread functions.
PTHREAD_ADAPTIVE_MUTEX_INITIALIZER_NP is changed to number 1, so that
adaptive mutex can be statically initialized correctly.
All the "Minimum Values" (POSIX.1-2008 XBD 13 Headers <limits.h>) are now
correct. These should all be exactly as they are in the specification; the
possibly higher values we support are announced differently.
PR: standards/104743
Submitted by: gcooper
MFC after: 2 weeks
The completer recognizes characters escaped with backslashes as being
literal parts of a word, and adds backslashes to avoid almost all
misinterpretation. In particular, filenames containing spaces can be
completed correctly.
For bug compatibility with the NetBSD version, the improved completion
function has a new name, _el_fn_sh_complete, and _el_fn_complete is
unchanged.
Submitted by: Guy Yur
This will be used to provide filename completion in sh(1).
Changes from the NetBSD code:
* wide character support disabled, as in the rest of libedit
* config.h and related portability stuff reduced/disabled, as in the rest
of libedit
Submitted by: Guy Yur
Obtained from: NetBSD
