Commit Graph

1735 Commits

Author SHA1 Message Date
Alan Cox
5ec699cdac o If the page returned by vm_page_grab(VM_ALLOC_ZERO) isn't prezeroed,
zero it.

Reviewed by:	dfr, peter
2002-07-21 04:07:26 +00:00
John Baldwin
d6ac80d12f Add PCI IDs for the A, B, and C UHCI controllers in the ICH4.
Sponsored by:	The Weather Channel
2002-07-19 22:17:02 +00:00
John Baldwin
8034890757 - Use more correct values to initialize the AGP controller during setup.
The value we use is still questionable for 440BX chipsets.
- When flushing the TLB just toggle the bit in question instead of writing
  a magic value that could trash other unrelated bits.
2002-07-17 02:52:01 +00:00
Alan Cox
613f5495ed o Lock page queue accesses by vm_page_wire(). 2002-07-14 20:40:32 +00:00
Alan Cox
1f54526952 o Complete the locking of page queue accesses by vm_page_unwire().
o Assert that the page queues lock is held in vm_page_unwire().
 o Make vm_page_lock_queues() and vm_page_unlock_queues() visible
   to kernel loadable modules.
2002-07-13 20:55:21 +00:00
Luigi Rizzo
2e4fb41fa5 Fix if_timer logic to make sure that there is always a timeout
pending if there are packets queued for transmission.

Several drivers still have the same problem.

MFC after: 3 days
2002-06-30 22:16:22 +00:00
Luigi Rizzo
bcb9ef4fe6 Fix if_timer logic to make sure that there is always a timeout
pending if there are packets queued for transmission.

MFC after: 3 days
2002-06-30 22:05:46 +00:00
Luigi Rizzo
4dfae5a5e8 Make sure that if_timer does not get reset if there are packets
still queued for transmission. This should solve the problem of
the device stalling on transmissions if some link event prevents
transmission.

There are other drivers which have the same problem and need to be
fixed in the same way.

MFC after: 3 days
2002-06-30 21:59:08 +00:00
Alfred Perlstein
7c41487d14 catch up with mextfree callback change when TI_PRIVATE_JUMBOS is defined.
Pointed out by: kdm
2002-06-29 11:26:05 +00:00
Peter Wemm
160554fbf4 Remove a couple of __P() stragglers. 2002-06-29 02:32:34 +00:00
Alfred Perlstein
69a3693f3e catch up with mextadd callback taking a void argument instead of a caddr_t. 2002-06-29 01:49:22 +00:00
Alfred Perlstein
64f0b9d749 remove or replace caddr_t with void.
make the mbuf external free function take a void * rather than caddr_t.
2002-06-28 23:48:23 +00:00
Kenneth D. Merry
98cb733c67 At long last, commit the zero copy sockets code.
MAKEDEV:	Add MAKEDEV glue for the ti(4) device nodes.

ti.4:		Update the ti(4) man page to include information on the
		TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
		and also include information about the new character
		device interface and the associated ioctls.

man9/Makefile:	Add jumbo.9 and zero_copy.9 man pages and associated
		links.

jumbo.9:	New man page describing the jumbo buffer allocator
		interface and operation.

zero_copy.9:	New man page describing the general characteristics of
		the zero copy send and receive code, and what an
		application author should do to take advantage of the
		zero copy functionality.

NOTES:		Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
		TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.

conf/files:	Add uipc_jumbo.c and uipc_cow.c.

conf/options:	Add the 5 options mentioned above.

kern_subr.c:	Receive side zero copy implementation.  This takes
		"disposable" pages attached to an mbuf, gives them to
		a user process, and then recycles the user's page.
		This is only active when ZERO_COPY_SOCKETS is turned on
		and the kern.ipc.zero_copy.receive sysctl variable is
		set to 1.

uipc_cow.c:	Send side zero copy functions.  Takes a page written
		by the user and maps it copy on write and assigns it
		kernel virtual address space.  Removes copy on write
		mapping once the buffer has been freed by the network
		stack.

uipc_jumbo.c:	Jumbo disposable page allocator code.  This allocates
		(optionally) disposable pages for network drivers that
		want to give the user the option of doing zero copy
		receive.

uipc_socket.c:	Add kern.ipc.zero_copy.{send,receive} sysctls that are
		enabled if ZERO_COPY_SOCKETS is turned on.

		Add zero copy send support to sosend() -- pages get
		mapped into the kernel instead of getting copied if
		they meet size and alignment restrictions.

uipc_syscalls.c:Un-staticize some of the sf* functions so that they
		can be used elsewhere.  (uipc_cow.c)

if_media.c:	In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
		calling malloc() with M_WAITOK.  Return an error if
		the M_NOWAIT malloc fails.

		The ti(4) driver and the wi(4) driver, at least, call
		this with a mutex held.  This causes witness warnings
		for 'ifconfig -a' with a wi(4) or ti(4) board in the
		system.  (I've only verified for ti(4)).

ip_output.c:	Fragment large datagrams so that each segment contains
		a multiple of PAGE_SIZE amount of data plus headers.
		This allows the receiver to potentially do page
		flipping on receives.

if_ti.c:	Add zero copy receive support to the ti(4) driver.  If
		TI_PRIVATE_JUMBOS is not defined, it now uses the
		jumbo(9) buffer allocator for jumbo receive buffers.

		Add a new character device interface for the ti(4)
		driver for the new debugging interface.  This allows
		(a patched version of) gdb to talk to the Tigon board
		and debug the firmware.  There are also a few additional
		debugging ioctls available through this interface.

		Add header splitting support to the ti(4) driver.

		Tweak some of the default interrupt coalescing
		parameters to more useful defaults.

		Add hooks for supporting transmit flow control, but
		leave it turned off with a comment describing why it
		is turned off.

if_tireg.h:	Change the firmware rev to 12.4.11, since we're really
		at 12.4.11 plus fixes from 12.4.13.

		Add defines needed for debugging.

		Remove the ti_stats structure, it is now defined in
		sys/tiio.h.

ti_fw.h:	12.4.11 firmware.

ti_fw2.h:	12.4.11 firmware, plus selected fixes from 12.4.13,
		and my header splitting patches.  Revision 12.4.13
		doesn't handle 10/100 negotiation properly.  (This
		firmware is the same as what was in the tree previously,
		with the addition of header splitting support.)

sys/jumbo.h:	Jumbo buffer allocator interface.

sys/mbuf.h:	Add a new external mbuf type, EXT_DISPOSABLE, to
		indicate that the payload buffer can be thrown away /
		flipped to a userland process.

socketvar.h:	Add prototype for socow_setup.

tiio.h:		ioctl interface to the character portion of the ti(4)
		driver, plus associated structure/type definitions.

uio.h:		Change prototype for uiomoveco() so that we'll know
		whether the source page is disposable.

ufs_readwrite.c:Update for new prototype of uiomoveco().

vm_fault.c:	In vm_fault(), check to see whether we need to do a page
		based copy on write fault.

vm_object.c:	Add a new function, vm_object_allocate_wait().  This
		does the same thing that vm_object allocate does, except
		that it gives the caller the opportunity to specify whether
		it should wait on the uma_zalloc() of the object structre.

		This allows vm objects to be allocated while holding a
		mutex.  (Without generating WITNESS warnings.)

		vm_object_allocate() is implemented as a call to
		vm_object_allocate_wait() with the malloc flag set to
		M_WAITOK.

vm_object.h:	Add prototype for vm_object_allocate_wait().

vm_page.c:	Add page-based copy on write setup, clear and fault
		routines.

vm_page.h:	Add page based COW function prototypes and variable in
		the vm_page structure.

Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
2002-06-26 03:37:47 +00:00
Jens Schweikhardt
21dc7d4f57 Fix typo in the BSD copyright: s/withough/without/
Spotted and suggested by:	des
MFC after:	3 weeks
2002-06-02 20:05:59 +00:00
Mike Silbersack
000c679b3c Enhance the use of the watchdog timer in this driver so that it will
allow recovery from transmission lockups which occur in the middle
of the descriptor list, rather than just at the beginning.

For some unknown reason, Rhine II chips have a tendency to stop
transmitting while under heavy load, possibly due to collisions.
Whether this behavior is due to a hardware bug or a driver glitch
is unknown as of now.

In either case, this change allows the driver to gracefully recover
from such situations.

Special thanks go to The Anarcat <anarcat@anarcat.dyndns.org>, who
bugged me into looking at this and to
Dominic Marks <dominic_marks@btinternet.com>, who performed a great
deal of testing to help characterize this problem.

MFC after:	3 days
2002-05-15 17:05:28 +00:00
John Baldwin
d204693572 Add support for the D-Link DFE-690TXD Cardbus card which has a RealTek 8139
with its own PCI ID.
2002-05-06 13:43:00 +00:00
Mitsuru IWASAKI
e8388e1466 Add suspend/resume code mostly merged from fxp/rl driver.
This is temporary hack, better and generalized solution probably
should be implemented at lower layer(MII or PCI?).
Tested by:	shoko.araki@soliton.co.jp
MFC after:	1 week
2002-05-06 10:55:42 +00:00
Poul-Henning Kamp
9ebe64ca1b Don't grab the lock until somewhat later in attach to avoid a lock
reversal.
2002-05-03 08:44:53 +00:00
Poul-Henning Kamp
45521525a7 Move us yet closer to IFM_* definitions in NetBSD. 2002-04-29 05:32:44 +00:00
Poul-Henning Kamp
b418ad5c2e Follow NetBSD and s/IFM_1000_TX/IFM_1000_T/ 2002-04-28 20:34:20 +00:00
Mike Barcroft
a30d4b3270 Move the new byte order function prototypes from <sys/param.h> to
<sys/endian.h>.  This puts us in line with NetBSD and OpenBSD.
2002-04-26 22:48:23 +00:00
Poul-Henning Kamp
14021ab570 Redo the pps bit to avoid digging into the private bits of the timecounter. 2002-04-26 21:22:02 +00:00
Poul-Henning Kamp
7bf758bff0 Simplify the RFC2783 and PPS_SYNC timestamp collection API. 2002-04-26 20:24:28 +00:00
Semen Ustimenko
9cd64fb3dd Move tx(4) driver to sys/dev/tx. BTW split hardware structures and constants
into if_txreg.h.

MFC after:	1 week
2002-04-19 22:43:57 +00:00
Luigi Rizzo
7632341a30 Add DEVICE_POLLING support to the "rl" driver.
The diffs are very similar to the ones for the "sis" driver.

MFC After: 5 days
2002-04-16 22:03:14 +00:00
Coleman Kane
9264fbc80a Fix some nits in AMD AGP driver. Remove excess malloc and move a bzero
out of the way, so it won't cause trouble.

Submitted by:	Frank Mayher <frank@exit.com>
MFC after: 1 week
2002-04-15 18:57:26 +00:00
Bill Paul
9a29439fb9 Nortel Networks sells a RealTek 8139-based NIC that's basically
the same thing as the SMC 1211, but with their own vendor ID.
Update the device list to support this NIC. (Discovered these
cards lying around the lab at work.)
2002-04-11 06:12:51 +00:00
Bill Paul
a72c060fb0 Teach the rlphy driver how to do parallel link detection. If the link partner
doesn't support NWAY, the RealTek PHY (both the integrated ones on 8139
chips and the RTL8201L 10/100 PHY) will not report the link speed via
the ANLPAR or BMSR registers. For the 8201L, we need to look in magic
vendor-specific PHY register 0x19. For the 8139 MAC+PHY combo, we have
to be able to test the RL_MEDIASTAT register.

The changes to rlphy.c are based largely on the patch from PR 30836,
however I tried to eliminate some magic numbers by creating an entry
for the 8201 PHY in miidevs.

Also updated if_rl.c to allow the rlphy driver to read the RL_MEDIASTAT
register via the rl_miibus_readreg() routine.
2002-04-07 20:55:50 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
Nicolas Souchu
e1e245b7a5 smbus_alloc_bus is not part of the smbus interface anymore 2002-03-23 18:27:16 +00:00
Nicolas Souchu
c17d43407f Major rework of the iicbus/smbus framework:
- VIA chipset SMBus controllers added
	- alpm driver updated
	- Support for dynamic modules added
	- bktr FreeBSD smbus updated but not tested
	- cleanup
2002-03-23 15:49:15 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Peter Wemm
1a8f253b64 Cast pointers to uintptr_t rather than u_int32_t. This doesn't work too
well on machines with 64 bit pointers.
2002-03-19 23:28:35 +00:00
Bruce Evans
eabfc7877d Work around a PLX9050 bug that causes system lockup in certain systems,
depending on the MMIO addresses allocated to the board.

PR:		30965, 20845 (maybe)
Submitted by:	Daniela Squassoni <daniela@cyclades.com>
Tested by:	Arjan Knepper <arjan@jak.nl>
		Scott Klement <klemscot@klements.com>
2002-03-17 04:10:38 +00:00
Peter Wemm
0574a5a746 Fix warning; amdsmb_abort() is not used. 2002-02-26 01:04:58 +00:00
Josef Karthauser
a10b07e4ec Fix a formatting error. 2002-02-17 12:41:50 +00:00
Josef Karthauser
97e5881fe1 KNF style the code, ready for an MFC. 2002-02-17 12:29:39 +00:00
Josef Karthauser
1b262fd0c5 KNF style the code, ready for an MFC. 2002-02-17 11:58:58 +00:00
Mike Silbersack
27d5f39f68 Remove mbuf exhaustion warning messages; these are handled by the
mbuf system in a rate-limited fashion now.

MFC after:	3 days
2002-02-11 23:38:30 +00:00
Josef Karthauser
d740688b87 Fix some bugs in the ohci driver with respect to irq setup failure.
Submitted by:	nyan
2002-02-11 14:39:57 +00:00
Luigi Rizzo
273b222cdb Use ETHER_CRC_LEN instead of SIS_CRC_SIZE
Suggested-by: Archie, Doug Ambrisko
2002-02-07 08:04:24 +00:00
Luigi Rizzo
254d9d5f73 Fix a bug in the driver -- the chip will always include the CRC
in the received packet size, but the upper level routines want
the length without it.

Reported-by: Doug Ambrisko, ambrisko@freebsd.org
2002-02-07 07:47:00 +00:00
Doug Ambrisko
4c2380660a Fix support for 630ET support. We don't need the Linux part to set the
mii access mode.  Fix the device ID and make it read the mac via sis_read_mac.

Reviewed by: 	imp
MFC after:	1 week
2002-02-06 22:06:47 +00:00
Benno Rice
64eecf3a43 Correctly identify the Intel 82830 AGP bridge. 2002-02-05 23:13:25 +00:00
Bruce Evans
3230a24cb4 Merged cy_pcireg.h into the one file that uses it (cy_pci.c). 2002-02-02 02:22:51 +00:00
Bruce Evans
7e8c3cecdf Fixed breakage of interrupt setup in previous commit. It used an
uninitialized variable in the !CY_PCI_FASTINTR case (*blush*).
2002-02-02 02:05:44 +00:00
Doug Ambrisko
45fe21a0a2 Forgot one part of the VLAN support for the dc(4) driver.
Pointed out by: Shin-ichi YOSHIMOTO <yosimoto@waishi.jp>
2002-01-16 21:34:11 +00:00
Doug Ambrisko
db40c1aef4 Add VLAN for the dc(4) driver (ie long frame). The patch is 2 parts.
One to notify the system that the MTU for VLAN can be 1500 so the vlan
will automatically be configured with a 1500 MTU the other is to ignore
the error case if the received frame is to long.

The frame size notification came from code in the SIS driver, and
the support for long frames derived from the NetBSD Tulip driver.

Tested on:	4 port D-Link adapter DFE-570TX 4 Intel 21143
		Netgear card with 82c169 PNIC 10/100BaseTX

Reviewed by:	ru (manpage), wpaul (not objected to), archie
Approved by:	imp
Obtained from:	NetBSD
2002-01-16 16:33:58 +00:00
Bill Paul
ff6f796866 Fix mind-o: compare sc->sis_rev instead of 'command' when trying to
decide how to read the station address.
2002-01-14 20:52:31 +00:00
Bill Paul
07c006c6fb Add support for newer integrated SiS 900 controllers on the 635 and 735
motherboard chipsets. We need to force the chip to reload its MAC address
into the receive filter, and enable software access mode for the PHY.

PR:		kern/33294
2002-01-12 21:12:17 +00:00