d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
49,696 Commits 72 Branches 135 Tags 3.2 GiB
85a0c81531
Commit Graph

113 Commits

Author SHA1 Message Date
Brian Somers
a54185c7ba Add (another) PnP entry for the ESS ES1869 (Compaq OEM) 
Submitted by:	mdharnois@home.com
PR:		19206
 2000-06-12 09:09:37 +00:00
Peter Wemm
a99bef94ed Untangle some #include between gusc.c/mss.c - gusc.c could create 
an attachment node for something that may not have been compiled in.
 2000-06-10 07:20:54 +00:00
Peter Wemm
cb73359d42 Unused include: #include "sbc.h" 2000-06-10 07:17:29 +00:00
Jun Kuriyama
81c0587fa1 Add more ESS1869 PnP Sound Card PnPid. 
Submitted by:	MIHIRA Yoshiro
PR:		kern/17349
 2000-05-29 07:43:51 +00:00
Cameron Grant
35f9e4a1db handle emulated dma reads 
don't try to get sample size from snd_dbuf
 2000-05-26 21:15:47 +00:00
Yoshihiro Takahashi
7c14268dbd Supported the mss on PC-98 and Sound Blaster 98. 
Submitted by:	"T.Yamaoka" <taka@windows.squares.net>
 2000-05-19 15:41:52 +00:00
Cameron Grant
942aeab734 fix a speed bug that nobody noticed 2000-05-15 02:10:27 +00:00
Cameron Grant
f23598ec2c maybe make cmi8330 work - no feedback yet 
implement bass/treble for yamaha opl-sax chips
 2000-04-23 17:57:35 +00:00
Cameron Grant
674c45bd04 make drivers start at beginning of buffer when triggered - improves mmap. 
not all tested.

not sure about aureal.c or csapcm.c
 2000-04-17 16:57:12 +00:00
Cameron Grant
0a3eb835c2 bump the buffer size from 4k to 16k. should improve performance under load. 2000-04-01 21:28:09 +00:00
Cameron Grant
57376530f0 split up ess and sb code 
rewrite ess mixer to use native registers
rewrite play/rec code to use more accurate timer when available
add code to use audio2 for playback, but disable it as no irqs are generated
 2000-03-28 18:31:01 +00:00
Cameron Grant
87374c3d7a toast warnings on i386 2000-03-20 15:50:08 +00:00
Cameron Grant
3252a47be9 make als120 cards which report dsp version 3.x whilst only supporting 4.x 
and *not* 3.x commands work
 2000-03-20 15:34:27 +00:00
Poul-Henning Kamp
d8b47cbb70 Stop isadma from abusing the B_READ, B_RAW and B_WRITE flags. 
Define ISADMA_{READ,WRITE,RAW} macros with the same numeric
values as the B_{READ,WRITE,RAW} and use them instead throughout.
 2000-03-13 10:19:32 +00:00
Seigo Tanimura
ca6da1de5e Add the logical ID of Avance Logic ALS100. The vendor ID is also 
checked, which was introduced in 1.18.

PR:		kern/16487
Submitted by:	Oliver Fromme <oliver.fromme@heim3.tu-clausthal.de>
Approved by:	jkh
 2000-03-09 02:13:21 +00:00
Cameron Grant
1a7d73a130 Partial fix: the following patch correctly configures the card for dual 
channel DMA. The problem was that the SDC bit (0x04) can only be set in
the MCE state.

PR:		kern/16587
Submitted by:	Matthew Reimer <mreimer@vpop.net>
Approved by:	jkh (in person)
 2000-03-05 15:51:09 +00:00
Cameron Grant
73bd6f4aab fix ess end-of-buffer repeating 
Submitted by:	nhibma
Approved by:	jkh
 2000-02-14 23:37:02 +00:00
Cameron Grant
a05382d9ae differentiate cmi8330 and als100 pnp cards based on their vendor id. this 
is a kludge for 4.0
 2000-01-29 00:18:29 +00:00
Andrew Gallatin
de6d75328e Add support for detection of the ESS 1688 found on my Dell Latitude LM 2000-01-28 04:28:11 +00:00
Peter Wemm
a3a2b1e1b2 Note the PnP id's for the NMX2210 next to the id's where they are used. 
The pnpbios doesn't supply a description in the case we've seen so
supply one.
 2000-01-23 13:17:03 +00:00
Cameron Grant
724efc44ec attach to non-ac97 neomagic chips and hope that ac97 ones do not have the 
same pnpbios id
 2000-01-13 06:11:32 +00:00
Daniel Eischen
d404cb51ee Add support for detection of the ESS 1878 chip. 2000-01-12 11:16:23 +00:00
Cameron Grant
9090c22ce7 general tidyup 2000-01-10 03:22:28 +00:00
Cameron Grant
2abc85f0c0 argh, forgot the bus_dma_tag_creates. 
also, panic if channel init fails instead of derefing null.
 2000-01-05 04:01:34 +00:00
Cameron Grant
9d1671b8c2 allocate isa bounce buffers of the right size for ess/mss cards, fixes 
panics reported
 2000-01-05 00:39:20 +00:00
Cameron Grant
43607766d6 revert buffer size to 64k 2000-01-01 21:50:20 +00:00
Peter Wemm
32ef0d3eb6 Attach the CS4610 PCI / CS4239 setup in isa compatability mode as CSC0100. 
The PCI component is non-AC97 apparently.

PR:		15632
Submitted by:	gibbs
 1999-12-30 20:04:11 +00:00
Cameron Grant
69cbc772d9 make ess cards use a 64k buffer again, by implementing esschan_init() 1999-12-30 04:04:43 +00:00
Cameron Grant
a0b57fb738 - latest 2ndbuffer patch 
- make chn_setdir work for rec on isa cards
- note: es1371 does not irq in smp

Submitted by:	tanimura
 1999-12-29 03:46:54 +00:00
Peter Wemm
7c361b70c5 Fix a mistake in the PNP EISA-encoding of the Avance ALS120 id. 
Submitted by:	Bryan Liesner <bleez@netaxs.com>
 1999-12-26 10:51:47 +00:00
Doug Rabson
7e864cbf08 Don't pass u_int32_t pointers to BUS_READ_IVAR since it tends to make 
alphas panic.
 1999-12-24 16:22:45 +00:00
Peter Wemm
2996751a32 Collapse a bunch of unused MD_CS42nn tags into a single one. This saves 
going to a lot of trouble to identify it and set the tag and then not use
it.  Convert the pnp id matching to the preferred table based system.
@@@0001 (CMI8330 ldn 0) is a mss, not a SB.
 1999-12-21 14:09:19 +00:00
Peter Wemm
93111ff410 Tidy up a few loose ends, including adding the pnp tags in comments. 
Remove @@@0001 - it's an MSS, not a SB, at least according to the
original pre-sbc code and according to a pnpinfo report that Cameron has.
 1999-12-21 14:04:14 +00:00
Peter Wemm
e9feccdcb4 Remove #if NISA > 0 - this is best done by the configuration process. 
It had a heap of unreferenced stuff if there was no isa configured in the
system.
 1999-12-21 13:55:46 +00:00
Cameron Grant
9035ec00a0 minor cleanup 
Parts Submitted by:	Ville-Pertti Keinonen <will@ztango.com>
 1999-12-21 08:43:28 +00:00
Cameron Grant
637e117737 don't use the sbpro mic vol register during init on ess cards; it causes 
feedback and we use the native one elsewhere.
 1999-12-21 06:18:03 +00:00
Cameron Grant
a451ce1dad minor cosmetics 1999-12-20 14:57:46 +00:00
Cameron Grant
71f78e06c6 make marcel's onboard ess1888 work 
Submitted by:	marcel
 1999-12-20 14:55:56 +00:00
Cameron Grant
34c18c4fc5 note to self: vibra16c is not vibra16x 1999-12-19 22:28:31 +00:00
Cameron Grant
ff00068cce fix for ess cards to use auto-init dma mode, so they work 1999-12-19 22:25:26 +00:00
Cameron Grant
09eb10434a remove unused mixer stuff 1999-12-19 18:18:55 +00:00
Cameron Grant
5c9abff13d fix a bug in sndstat output, tidy up a few bits 1999-12-19 15:07:56 +00:00
Cameron Grant
df74837fd9 generalise the code a bit, and add an irq handler so that the child devices 
can share the irq
 1999-12-19 14:44:08 +00:00
Cameron Grant
71dde75288 remove the restriction limiting the vibra16x to 8 bit 
Noticed By:	Clive Lin <clive@CirX.ORG>
 1999-12-19 14:21:38 +00:00
Cameron Grant
e53ad03a80 make vibra16x cards announce what they are in /dev/sndstat 1999-12-18 22:47:23 +00:00
Cameron Grant
354398891a make the vibra16x work for playback at least, record is untested 1999-12-18 22:21:47 +00:00
Seigo Tanimura
cf4f3dda81 Correct the logical ID of Avance Asound 110. 
Submitted by:	Bryan Liesner <bleez@netaxs.com>
 1999-12-18 12:17:02 +00:00
Cameron Grant
d4a72b067c make sb dependant on sbc 
add support for non-pnp cards to sbc
move card identification to sbc
channel-swapping code is in sb now instead of dsp
vibra16x support is still broken, but will be fixed soon

note: sbc is now compulsory for sb cards

for pnp cards use:
device sbc0

for non-pnp cards eg:
device sbc0 at isa? port 0x240 irq 5 drq 3 flags 0x15
(hints as oldpcm)

both in addition to:
device pcm0

Reviewed by:	tanimura,dfr
Said he liked it: peter
 1999-12-12 02:30:19 +00:00
Bill Fumerola
953fbebedd Reckognize the 'Avance Asound 100' 
Submitted by:	Oliver Fromme <olli@dorifer.heim3.tu-clausthal.de>
 1999-12-07 01:53:24 +00:00
Peter Wemm
c2af6f650c Update for pnp adjustments regarding NPNP. 
Also, optimize out a mess of #if's that were duplicating work already
done by config(8).  For example, if a file is marked as
"dev/sound/pci/foo.c optional pcm pci" then it's only added if pcm *and*
pci are present, so #if NPCM > 0 and #if NPCI > 0 are totally redundant.
A bit more work is still needed.

Discussed with: cg (a few weeks ago)
 1999-12-06 18:26:33 +00:00