Commit Graph

49 Commits

Author SHA1 Message Date
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Adrian Chadd
81c2214dda Add a missing #include, required for IEEE80211_DEBUG. 2012-06-01 06:20:39 +00:00
Bernhard Schmidt
ada977b103 Use suspend/resume methods provided by net80211. This ensures that the
appropriate state handling takes place, not doing so results in the
device doing nothing until manual intervention.

Reviewed by:	iwasaki
Tested by:	iwasaki (iwi)
MFC after:	4 weeks
2012-03-23 19:32:30 +00:00
Bernhard Schmidt
fcd9500f91 Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
  compiler warnings

Submitted by:	arundel@
2011-12-17 10:23:17 +00:00
Bernhard Schmidt
129145a426 Add module version to iwi/ipw/wpi and iwn.
The version is used to check if a module is already preset, not setting
it results in:

can't re-use a leaf (ipw)!
module_register: module pci/ipw already exists!
Module pci/ipw failed to register: 17

while trying to load the module due to an entry in loader.conf. With this
commit we get the expected:

module ipw already present!

Reported by:	Dru Lavigne, bz
Tested by:	bz
MFC after:	1 week
2011-05-31 19:08:25 +00:00
Bernhard Schmidt
797b914622 No need for htole32(), which is an uint8_t. 2011-05-01 18:41:57 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Bernhard Schmidt
bd56e71b4b Pull ieee80211_ratectl_node_init() calls from drivers into net80211.
This fixes hostap mode for at least ral(4) and run(4), because there is
no sufficient call into drivers which could be used initialize the node
related ratectl variables.

MFC after:	3 days
2011-01-17 20:15:15 +00:00
Bernhard Schmidt
a71ad78761 The RX path is missing a few bus_dmamap_*() calls, this results in
modification of memory which was already free'd and eventually in:
wpi0: could not map mbuf (error 12)
wpi0: wpi_rx_intr: bus_dmamap_load failed, error 12
and an usuable device.

PR:		kern/144898
MFC after:	3 days
2010-12-30 18:29:22 +00:00
Bernhard Schmidt
6a9e69db1b Fix panic trying to use monitor mode. The iwn_cmd() calls issued by
iwn_config() want to msleep() on the mutex.

PR:		kern/138427
Submitted by:	Henry Hu <henry.hu.sh at gmail.com>
MFC after:	3 days
2010-12-19 10:36:06 +00:00
Bernhard Schmidt
f015cb7882 Add 2 missing bus_dmamap_sync() calls. Those fix random 'scan timeout',
'could not set power mode', 'device config failed' and other errors due
reading invalid memory.

Obtained from:	OpenBSD
MFC after:	3 days
2010-12-18 15:45:10 +00:00
Bernhard Schmidt
9624106633 Fix association on 5GHz channels. The device is initially configured using
a 2GHz channel with appropriate flags set to sc->config. Due to not zeroing
sc->config for auth/assoc those flags are still set while trying to connect
on a 5GHz channel.

MFC after:	3 days
2010-12-18 15:35:10 +00:00
Bernhard Schmidt
5f69ca6227 Fix a panic while disabling the RF kill button, caller of the
wpi_rfkill_resume() function will take care of the lock.

PR:		kern/144898
MFC after:	3 days
2010-12-18 15:25:21 +00:00
Bernhard Schmidt
3934c8a53f Fix scanning after loosing a connection. The firmware assumes that as long
as an association ID is set any scan is supposed to be a background scan.
This implies that the firmware will switch back to the associated channel
after a certain threshold, though, we are not notified about that. We
currently catch this case by a timer which will reset the firmware after
a 'scan timeout', though, upper layers are not notified about that and
will simply hang until manual intervention. Fix this by resetting the
firmware's knowledge about any association on RUN -> ASSOC and
!INIT -> SCAN transitions.

Tested by:	Zhihao Yuan <lichray at gmail.com>
MFC after:	1 week
2010-12-06 19:05:44 +00:00
Bernhard Schmidt
a7c6aabdc3 Instead of using the AMRR ratectl algo as default for drivers which have
the IEEE80211_C_RATECTL flag set, default to NONE for all drivers. Only if
a driver calls ieee80211_ratectl_init() check if the NONE algo is still
selected and try to use AMRR in that case. Drivers are still free to use
any other algo by calling ieee80211_ratectl_set() prior to the
ieee80211_ratectl_init() call.

After this change it is now safe to assume that a ratectl algo is always
available and selected, which renders the IEEE80211_C_RATECTL flag pretty
much useless. Therefore revert r211314 and 211546.

Reviewed by:	rpaulo
MFC after:	2 weeks
2010-11-06 18:17:20 +00:00
Bernhard Schmidt
ad8e331bf2 Introduce IEEE80211_C_RATECTL, drivers which use the ratectl framework
should set this capability.

MFC after:	2 weeks
2010-08-14 20:12:10 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
Rui Paulo
c9cacb2d3c Fix recent breakage: wpi_newassoc() wasn't supposed to be removed and
it needs to call ieee80211_ratectl_node_init().

Submitted by:	bschmidt
MFC after:	1 month
2010-04-09 11:47:03 +00:00
Rui Paulo
b6108616ac net80211 rate control framework (net80211 ratectl).
This framework allows drivers to abstract the rate control algorithm and
just feed the framework with the usable parameters. The rate control
framework will now deal with passing the parameters to the selected
algorithm. Right now we have AMRR (the default) and RSSADAPT but there's
no way to select one with ifconfig, yet.
The objective is to have more rate control algorithms in the net80211
stack so all drivers[0] can use it. Ideally, we'll have the well-known
sample rate control algorithm in the net80211 at some point so all
drivers can use it (not just ath).

[0] all drivers that do rate control in software, that is.

Reviewed by:	bschmidt, thompsa, weyongo
MFC after:	1 months
2010-04-07 15:29:13 +00:00
Gavin Atkinson
4e7ebd34ef Don't panic on failure to attach if we fail before or during the
if_alloc() of ifp.  This fixes the panic reported in the PR, but
not the attach failure.

PR:		kern/139079
Tested by:      Steven Noonan <steven uplinklabs.net>
Reviewed by:	thompsa
Approved by:	ed (mentor)
MFC after:	2 weeks`
2009-12-14 19:18:02 +00:00
Doug Barton
afe0ec0027 Properly turn off debugging
LART applied (gently) by:	sam
2009-11-08 02:33:33 +00:00
Doug Barton
5c670c33fc Turn off WPI_DEBUG by default as the driver seems sufficiently stable
at this point.

Reviewed by:	benjsc, thompsa
2009-11-07 18:42:53 +00:00
Rui Paulo
820e6a1f38 For ic_opmode switch cases, provide a default label with a printf saying
this opmode is not supported.

Approved by:	re (kib)
2009-07-10 15:28:33 +00:00
Sam Leffler
5463c4a485 Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
  and remove explicit bpf support from wireless drivers; drivers now
  use ieee80211_radiotap_attach to setup shared data structures that
  hold the radiotap header for each packet tx/rx
o remove rx timestamp from the rx path; it was used only by the tdma support
  for debugging and was mostly useless due to it being 32-bits and mostly
  unavailable
o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and
  per-com state when there are active taps
o track the number of monitor mode vaps
o use bpf tap and monitor mode vap state to decide when to collect radiotap
  state and dispatch frames; drivers no longer explicitly directly check
  bpf state or use bpf calls to tap frames
o handle radiotap state updates on channel change in net80211; drivers
  should not do this (unless they bypass net80211 which is almost always
  a mistake)
o update various drivers to be more consistent/correct in handling radiotap
o update ral to include TSF in radiotap'd frames
o add promisc mode callback to wi

Reviewed by:	cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
Andrew Thompson
e1d2045e3f Abort any scan on a fatal firmware. ic_scan_curchan is overridden to perform
the scan in firmware and this relies on the firmware to wake up the scan task
on completion.
2009-05-10 02:44:19 +00:00
Andrew Thompson
5efea30f03 Create a taskqueue for each wireless interface which provides a serialised
sleepable context for net80211 driver callbacks. This removes the need for USB
and firmware based drivers to roll their own code to defer the chip programming
for state changes, scan requests, channel changes and mcast/promisc updates.
When a driver callback completes the hardware state is now guaranteed to have
been updated and is in sync with net80211 layer.

This nukes around 1300 lines of code from the wireless device drivers making
them more readable and less race prone.

The net80211 layer has been updated as follows
 - all state/channel changes are serialised on the taskqueue.
 - ieee80211_new_state() always queues and can now be called from any context
 - scanning runs from a single taskq function and executes to completion. driver
   callbacks are synchronous so the channel, phy mode and rx filters are
   guaranteed to be set in hardware before probe request frames are
   transmitted.

Help and contributions from Sam Leffler.

Reviewed by:	sam
2009-05-02 15:14:18 +00:00
Sam Leffler
339ccfb391 Hoist 802.11 encapsulation up into net80211:
o call ieee80211_encap in ieee80211_start so frames passed down to drivers
  are already encapsulated
o remove ieee80211_encap calls in drivers
o fixup wi so it recreates the 802.3 head it requires from the 802.11
  header contents
o move fast-frame aggregation from ath to net80211 (conditional on
  IEEE80211_SUPPORT_SUPERG):
  - aggregation is now done in ieee80211_start; it is enabled when the
    packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames
    are held on a staging queue according to ieee80211_ffagemax
    (net.wlan.ffagemax) to wait for a frame to combine with
  - drivers must call back to age/flush the staging queue (ath does this
    on tx done, at swba, and on rx according to the state of the tx queues
    and/or the contents of the staging queue)
  - remove fast-frame-related data structures from ath
  - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle
    per-node fast-frames state (we reuse 11n tx ampdu state)
o change ieee80211_encap calling convention to include an explicit vap
  so frames coming through a WDS vap are recognized w/o setting M_WDS

With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames.

Reviewed by:	thompsa, rpaulo, avatar, imp, sephe
2009-03-30 21:53:27 +00:00
Sam Leffler
29aca94080 Eliminate ic_myaddr so changing the mac address of a device works correctly:
o remove ic_myaddr from ieee80211com
o change ieee80211_ifattach to take the mac address of the physical device
  and use that to setup the lladdr.
o replace all references to ic_myaddr in drivers by IF_LLADDR
o related cleanups (e.g. kill dead code)

PR:		kern/133178
Reviewed by:	thompsa, rpaulo
2009-03-29 17:59:14 +00:00
Juli Mallett
607158eb35 Put the "%d retries" debug message in the transmit path behind WPI_DEBUG_TX
rather than behind a seemingly accidental constant likely left over from one of
the related drivers which uses log levels rather than per-facility debugging
flags.  This should get rid of contextless messages on the console for people
who have not set (or cleared the default) debugging flags.
2009-03-27 05:44:53 +00:00
Juli Mallett
fcec677d3d o) Check that no overrun or CRC errors were encountered in receiving a
packet.  Linux, OpenBSD and our iwn(4) all do this.  It also results in
   a huge performance improvement (and the rejection of a fair number of
   apparently-bad packets on receive) on my hardware.
o) Like the wpi(4) driver in OpenBSD, and like our iwn(4), also drop runt
   packets.
o) Don't bother doing IFQ_POLL and then IFQ_DRV_DEQUEUE, just do
   IFQ_DRV_DEQUEUE outright.  This is more similar to how OpenBSD and our
   iwn(4) work.

Reviewed by:	sam
2009-03-27 03:17:25 +00:00
Sam Leffler
015ebba0c0 remove references to ic_stats
Spotted by:	Lucius Windschuh <lwindschuh@googlemail.com>
2009-02-13 16:17:05 +00:00
Sam Leffler
e66b0905fc o use the new association callback to notify the driver when joining a bss
in sta and adhoc modes; this should've been done forever ago as most all
  drivers use this hook to set per-station transmit parameters such as for
  tx rate control
o adjust drivers to remove explicit calls to the driver newassoc method
2008-10-27 16:46:50 +00:00
Benjamin Close
34f004ce88 Correct detection of particular wpi cards which only support b/g
and fix the output to indicate b/g not a/g

Submitted by:	ischram at telenet.be
Reviewed by:	thompsa
Approved by:	sam (co-mentor)
MFC after:	1 month
2008-08-24 22:42:39 +00:00
Andrew Thompson
6845408d73 - Fix compile if WPI_DEBUG is not defined
- Allow debug.wpi to be set from a tunable
- Put ring reset messages back under debug
- Add more debug output around channel init
2008-06-23 15:40:56 +00:00
Sam Leffler
38c208f876 Change the calling convention for ic_node_alloc to deal with
some longstanding issues:
o pass the vap since it's now the "coin of the realm" and required
  to do things like set initial tx parameters in private node
  state for use prior to association
o pass the mac address as cards that maintain outboard station
  tables require this to create an entry (e.g. in ibss mode)
o remove the node table reference, we only have one node table
  and it's unlikely this will change so this is not needed to
  find the com structure
2008-06-07 18:38:02 +00:00
Andrew Thompson
6d107591b2 The beacon miss notification must run without locks held has it calls back into
wpi_raw_xmit();
2008-05-16 04:15:54 +00:00
Sam Leffler
c43feede8b Minor cleanup of vap create work:
o add IEEE80211_C_STA capability to indicate sta mode is supported
  (was previously assumed) and mark drivers as capable
o add ieee80211_opcap array to map an opmode to the equivalent capability bit
o move IEEE80211_C_OPMODE definition to where capabilities are defined so it's
  clear it should be kept in sync (on future additions)
o check device capabilities in clone create before trying to create a vap;
  this makes driver checks unneeded
o make error codes return on failed clone request unique
o temporarily add console printfs on clone request failures to aid in
  debugging; these will move under DIAGNOSTIC or similar before release
2008-05-12 00:15:30 +00:00
Andrew Thompson
31a8c1edd8 Unify all the wifi *_ioctl routines
- Limit grabbing the lock to SIOCSIFFLAGS.
 - Move ieee80211_start_all() to SIOCSIFFLAGS.
 - Remove SIOCSIFMEDIA as it is not useful.
 - Limit ether_ioctl to only SIOCGIFADDR. SIOCSIFADDR and SIOCSIFMTU have no
   affect as there is no input/output path in the vap parent.  The vap code
   will handle the reinit of the mac address changes.
 - Split off ndis_ioctl_80211 as it was getting too different to wired devices.

This fixes a copyout while locked and a lock recursion.

Reviewed by:		sam
2008-05-01 04:55:00 +00:00
Sam Leffler
b032f27c36 Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral).  Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by:	Hobnob and Marvell
Reviewed by:	many
Obtained from:	Atheros (some bits)
2008-04-20 20:35:46 +00:00
Sam Leffler
810df80181 fix inverted test that disabled ACK's on xmit 2008-03-12 20:03:31 +00:00
Andrew Thompson
82f1b132a4 Update wpi(4) with stability fixes
- remove second taskqueue
 - busdma 16k alignment workaround
 - use busdma instead of external mbuf storage on Rx
 - locking fixes
 - net80211 state change fixes
 - improve scanning reliability
 - improve radio hw switch interaction
 - consolidate callouts

Parts obtained from:	benjsc, sam
Tested by:		many
2008-03-10 23:16:48 +00:00
Poul-Henning Kamp
cf827063a9 Give MEXTADD() another argument to make both void pointers to the
free function controlable, instead of passing the KVA of the buffer
storage as the first argument.

Fix all conventional users of the API to pass the KVA of the buffer
as the first argument, to make this a no-op commit.

Likely break the only non-convetional user of the API, after informing
the relevant committer.

Update the mbuf(9) manual page, which was already out of sync on
this point.

Bump __FreeBSD_version to 800016 as there is no way to tell how
many arguments a CPP macro needs any other way.

This paves the way for giving sendfile(9) a way to wait for the
passed storage to have been accessed before returning.

This does not affect the memory layout or size of mbufs.

Parental oversight by:	sam and rwatson.

No MFC is anticipated.
2008-02-01 19:36:27 +00:00
Sam Leffler
650bd88c74 rx mbufs must have a pkthdr; use m_gethdr to populate the rx ring
(and while here correct the mbuf type)

Submitted by:	Sam Banks <w0lfie@clear.net.nz>
MFC after:	1 week
2008-01-26 22:35:57 +00:00
John Baldwin
304a4c6fb1 - Retire npe_defrag(), gem_defrag(), msk_defrag(), nfe_defrag(), and
re_defrag() and use m_collapse() instead.
- Replace a reference to ath_defrag() in a comment in if_wpi.c with
  m_collapse().
2008-01-17 23:37:47 +00:00
Benjamin Close
8b92cdc94c Fix up a race condition with the callout_stop method in newstate.
The call should happen with the driver lock held. We don't hold the driver
lock in newstate as it's a separate thread where we can't sleep (and we only
call wpi_cmd in async mode).

Discovered By: Attillo's callout rework
Approved By: mlaier (comentor)
2007-11-27 09:09:09 +00:00
Benjamin Close
a7099588fc Handle missed beacons correctly
Approved by: mlaier (comentor)
2007-11-27 08:58:32 +00:00
Rink Springer
c7fca64fe1 Remove the IEEE80211_C_WEP capability flag - setting it makes net80211 expect
that the driver will handle WEP encryption. However, this does not seem to be
implemented by this driver (or maybe the chipset doesn't support it?)

Removing the flag makes my wpi card work using wpa_supplicant(8) on a
network with 802.1x security (without this change it authenticated fine, but
tcpdump only saw garbage packets)

Reviewed by:	benjsc, imp (mentor)
Approved by:	imp (mentor), sam
2007-11-13 16:12:59 +00:00
Benjamin Close
607b0aec7c Turn off debug output, its been confusing users.
Approved by: mlaier (comentor)
2007-11-08 21:57:08 +00:00
Benjamin Close
6607310b74 Initial Import of wpi driver based on p4 changeset 128641.
This import includes:
   o wpi Wireless driver for the Intel 3945 Wireless Lan Controller (802.11abg) (sys/dev/wpi)
   o Intel firmware revision 2.14.4 & associated LICENSE (sys/dev/contrib/wpi, sys/contrib/dev/wpi/LICENSE)
   o wpifw Firmware driver (sys/modules/wpifw)

Approved by: mlaier, sam (co-mentors)
2007-11-05 11:47:19 +00:00