The PV backend will only pick the new options when the interface is detached
and reattached again, so perform a full reset when changing options. This is
very fast, and should not be noticeable by the user.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D6658
Just calling gnttab_end_foreign_access_ref doesn't free the references,
instead call gnttab_end_foreign_access with a NULL page argument in order to
have the grant references freed. The code that maps the ring
(xenbus_map_ring) already uses gnttab_grant_foreign_access which takes care
of allocating a grant reference.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D6608
This patch fixes two issues seen on hot-unplug. The first one is a panic
caused by calling ether_ifdetach after freeing the internal netfront queue
structures. ether_ifdetach will call xn_qflush, and this needs to be done
before freeing the queues. This prevents the following panic:
Fatal trap 9: general protection fault while in kernel mode
cpuid = 2; apic id = 04
instruction pointer = 0x20:0xffffffff80b1687f
stack pointer = 0x28:0xfffffe009239e770
frame pointer = 0x28:0xfffffe009239e780
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (thread taskq)
[ thread pid 0 tid 100015 ]
Stopped at strlen+0x1f: movq (%rcx),%rax
db> bt
Tracing pid 0 tid 100015 td 0xfffff800038a6000
strlen() at strlen+0x1f/frame 0xfffffe009239e780
kvprintf() at kvprintf+0xfa0/frame 0xfffffe009239e890
vsnprintf() at vsnprintf+0x31/frame 0xfffffe009239e8b0
kassert_panic() at kassert_panic+0x5a/frame 0xfffffe009239e920
__mtx_lock_flags() at __mtx_lock_flags+0x164/frame 0xfffffe009239e970
xn_qflush() at xn_qflush+0x59/frame 0xfffffe009239e9b0
if_detach() at if_detach+0x17e/frame 0xfffffe009239ea10
netif_free() at netif_free+0x97/frame 0xfffffe009239ea30
netfront_detach() at netfront_detach+0x11/frame 0xfffffe009239ea40
[...]
Another panic can be triggered by hot-plugging a NIC:
Fatal trap 18: integer divide fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x20:0xffffffff80902203
stack pointer = 0x28:0xfffffe00508d3660
frame pointer = 0x28:0xfffffe00508d36a0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 2960 (ifconfig)
[ thread pid 2960 tid 100088 ]
Stopped at xn_txq_mq_start+0x33: divl %esi,%eax
db> bt
Tracing pid 2960 tid 100088 td 0xfffff8000850aa00
xn_txq_mq_start() at xn_txq_mq_start+0x33/frame 0xfffffe00508d36a0
ether_output() at ether_output+0x570/frame 0xfffffe00508d3720
arprequest() at arprequest+0x433/frame 0xfffffe00508d3820
arp_ifinit() at arp_ifinit+0x49/frame 0xfffffe00508d3850
xn_ioctl() at xn_ioctl+0x1a2/frame 0xfffffe00508d3890
in_control() at in_control+0x882/frame 0xfffffe00508d3910
ifioctl() at ifioctl+0xda1/frame 0xfffffe00508d39a0
kern_ioctl() at kern_ioctl+0x246/frame 0xfffffe00508d3a00
sys_ioctl() at sys_ioctl+0x171/frame 0xfffffe00508d3ae0
amd64_syscall() at amd64_syscall+0x2db/frame 0xfffffe00508d3bf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe00508d3bf0
--- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x8011e185a, rsp =
0x7fffffffe478, rbp = 0x7fffffffe4c0 ---
This is caused by marking the driver as active before it's fully
initialized, and thus calling xn_txq_mq_start with num_queues set to 0.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D6646
In order to use custom taskqueues we would have to mask the interrupt, which
is basically what is already done for an interrupt handler, or else we risk
loosing interrupts. This switches netfront to the same interrupt handling
that was done before multiqueue support was added.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
This is based on Linux commit 1f3c2eba1e2d866ef99bb9b10ade4096e3d7607c from
David Vrabel:
A full Rx ring only requires 1 MiB of memory. This is not enough memory
that it is useful to dynamically scale the number of Rx requests in the ring
based on traffic rates, because:
a) Even the full 1 MiB is a tiny fraction of a typically modern Linux
VM (for example, the AWS micro instance still has 1 GiB of memory).
b) Netfront would have used up to 1 MiB already even with moderate
data rates (there was no adjustment of target based on memory
pressure).
c) Small VMs are going to typically have one VCPU and hence only one
queue.
Keeping the ring full of Rx requests handles bursty traffic better than
trying to converge on an optimal number of requests to keep filled.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Currently FreeBSD is not properly fetching the TSO information from the Xen
PV ring, and thus the received packets didn't have all the necessary
information, like the segment size or even the TSO flag set.
Sponsored by: Citrix Systems R&D
* The "if (!data->valid_tx_ant || !data->valid_rx_ant) {" check was getting
triggered with a 3165 chipset.
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD 3655dfb6fc311fc83e5ce8370dd91b4cd4a37991
Move some declarations to if_iwmreg.h.
Remove iwm_fw_alive(); just call iwm_post_alive() directly.
Simplify iwm_mvm_add_sta().
Return timeout error from iwm_apm_init().
Print a message when init (i.e. boot) firmware fails to load.
Remove some commented-out code which wouldn't compile anyway.
Move iwm_mvm_tx_fifo to if_iwmreg.h to match better where Linux puts it.
Taken-From: OpenBSD (if_iwm.c r1.80 and if_iwmreg.h r1.11)
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD 29fcb331e5620ae145a6ab9cdda830e22fff626a
This is the initial framework to call into the MCI HAL routines and drive
the basic state engine.
The MCI bluetooth coex model uses a command channel between wlan and
bluetooth, rather than a 2-wire or 3-wire signaling protocol to control things.
This means the wlan and bluetooth chip exchange a lot more information and
signaling, even at the per-packet level. The NICs in question can share
the input LNA and output PA on the die, so they absolutely can't stomp
on each other in a silly fashion. It also allows for the bluetooth side
to signal when profiles come and go, so the driver can take appropriate
control. There's also the possibility of dynamic bluetooth/wlan duty cycle
control which I haven't yet really played with.
It configures things up with a static "wlan wins everything" coexistence,
configures up the available 2GHz channel map for bluetooth, sets a static
duty cycle for bluetooth/wifi traffic priority and drives the basics needed to
keep the MCI HAL code happy.
It doesn't do any actual coexistence except to default to "wlan wins everything",
which at least demonstrates that things do indeed work. Bluetooth inquiry frames
still trump wifi (including beacons), so that demonstrates things really do
indeed seem to work.
Tested:
* AR9462 (WB222), STA mode + bt
* QCA9565 (WB335), STA mode + bt
TODO:
* .. the rest of coexistence. yes, bluetooth, not people. That stuff's hard.
* It doesn't do the initial BT side calibration, which requires a WLAN chip
reset. I'll fix up the reset path a bit more first before I enable that.
* The 1-ant and 2-ant configuration bits aren't being set correctly in
if_ath_btcoex.c - I'll dig into that and fix it in a subsequent commit.
* It's not enabled by default for WB222/WB225 even though I believe it now
can be - I'll chase that up in a subsequent commit.
Obtained from: Qualcomm Atheros, Linux ath9k
With r284861, UMA zones use the trash ctor and dtor by default. This is
incompatible with memguard, which frees the backing page when the item
is freed. Modify the UMA debug functions to be no-ops if the item was
allocated from memguard. This also fixes constructors such as
mb_ctor_pack(), which invokes the trash ctor in addition to performing
some initialization.
Reviewed by: glebius
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D6562
sys/cddl/contrib/opensolaris/uts/common/sys/acl.h:
Improve the english in a comment. No functional changes
Submitted by: gibbs
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
otherwise the system will hang.
This is a temporarily least intrusive crutch to get certain panicing systems
dumping. The proper fix should question is g_mirror_destroy() should be called
on a panicing system at all.
Discussed with: mav
This import includes The basic blacklist library and utility programs,
to add a system-wide packet filtering notification mechanism to
FreeBSD.
The rational behind the daemon was given by Christos Zoulas in a
presentation at vBSDcon 2015: https://youtu.be/fuuf8G28mjs
Reviewed by: rpaulo
Approved by: rpaulo
Obtained from: NetBSD
Relnotes: YES
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5912
Add text to thr_exit(2) and thr_new(2) discouraging their use in
applications since calling these in a process with libthr loaded will
confuse libthr and is likely to cause hangs or crashes.
The thr_kill2(2) call is not used by libthr and may be useful in special
applications.
The other calls can be used in applications but it should not be necessary.
For FreeBSD 12, I'm considering updating setgrent() to have a function
prototype that conforms to POSIX. FreeBSD seems to be the only operating
system that lets setgrent() return an integer. It's also inconsistent
with setpwent().
It looks like our libcasper depends on setgrent() returning an integer.
Get rid of that.
Reviewed by: oshogbo
Differential Revision: https://reviews.freebsd.org/D6659
for the CONFS issue with dma.conf and ppp.conf.
Thank you very much to Bryan Drewery for looking into the
problem and providing this fix.
Pointyhat: gjb
Sponsored by: The FreeBSD Foundation
acquire the page lock, which recurses. Avoid the recursion by reusing
the code from vm_page_remove() in a new helper
vm_page_xunbusy_maybelocked().
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
The 'CONFS' entries in share/mk/bsd.confs.mk explicitly check
for the 'installconfig', but does not behave properly with the
'distribute' target.
This seems to be related to the previously-reported issues
with files within /etc in the past.
Reported by: Ben Woods
Sponsored by: The FreeBSD Foundation
fractional floating point values with integer divides. This will
eliminate any chance that the compiler will generate code to evaluate
the expression using floating point at runtime.
Suggested by: bde
Submitted by: Rasool Al-Saadi <ralsaadi@swin.edu.au>
MFC after: 8 days (with r300779 and r300949)
ki_flag and ki_tdflag have been 'long', not 'int', since 2000 and 2005,
respectively.
Submitted by: Shawn Wills <swills at isilon dot com>
Sponsored by: EMC / Isilon Storage Division
comp_handler_lock but c4iw_destroy_cq has already freed the CQ memory
(which is where the lock resides).
Submitted by: Krishnamraju Eraparaju @ Chelsio
Sponsored by: Chelsio Communications
Inline version of primitives do an atomic op and if it fails they fallback to
actual primitives, which immediately retry the atomic op.
The obvious optimisation is to check if the lock is free and only then proceed
to do an atomic op.
Reviewed by: jhb, vangyzen
case of \c in the prompt format string is a no-op. We already passed
this test at the top of the loop, and i has not yet been incremented in
this path. Change this test to (i < PROMPTLEN - 2).
Reported by: Coverity
CID: 1008328
Reviewed by: cem
MFC after: 1 week
Files listed in 'CONFS' are not properly included in new
installations (missing from base.txz), for reasons I still
do not fully understand.
This reverts the change excluding /etc/ppp/ppp.conf from
a new installation. /etc/dma/dma.conf is also affected,
but requires a different solution, still being investigated.
Reported by: Ben Woods
Sponsored by: The FreeBSD Foundation
No functional change, although _thread_printf() may be slightly less functional
or render some values differently from libc snprintf(3). No ABI change.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6672
Do not set HWRTSEN bit when CTS-to-self is used; CTS2SELF bit triggers
CTS frame transmission by itself (and it does not work when HWRTSEN bit
is set).
Tested with:
* RTL8188CUS, HOSTAP mode (11g)
* RTL8188EU, STA mode (11g)
If tzsetup UTC is run then it successfully configured the system for UTC
including installing /etc/localtime however if the user ran just tzsetup
for interactive configuration and select UTC no /etc/localtime was installed
which resulted in failures for utilities which require said file.
Change set_zone_utc to call install_zoneinfo("UTC") to ensure that
/etc/localtime is created for interactive UTC selection.
Users who have previously run tzsetup in interactive mode and select UTC
can install the missing /etc/localtime by running tzsetup -r.
Also correct static miss-match for set_zone_utc.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Multiplay
