transcription during the (pcred,ucred) merge; this was not used for
the kill() system call, so does not affect direct explicit process
signalling.
Pointed out by: fenner
* Use the bootinfo's memory map if present instead of hard-coding SKI's
memory map.
* Record the location of the I/O Port Space if present in the memory map.
This works if /dev exists, or if / is read/write (nfsroot). If it is
too hard, leave it up to init -d (which will probably fail if /dev does
not exist, but there isn't much else we can do short of making a union
mount on /).
This means we get a proper /dev if you boot a 5.x kernel on a 4.x world,
which I happen to do often (the ramdisks on our install netboot servers
have 4.x userland worlds on them).
mandatory "card" identifier string. A logical devices on the ISA PnP
card may optionally have a "device" identifier string. Do not confuse
them.
The "card" identifier string is assigned to a logical device as the
default description string when the device is found. (If the "card"
identifier string has not been found, use the EISA PnP ID string.
Strictly speaking, this is an error.) We will override it when a
"device" identifier string is found later.
- Add workaround for the problematic PnP BIOS which does not assign
irq resource for the PS/2 mouse device node; if there is no irq
assigned for the PS/2 mouse node, refer to device.hints for an
irq number. If we still don't find an irq number in the hints
database, use a hard-coded value.
- Delete unused ivars.
- Bit of clean up in probe/attach.
- Add PnP ID for the PS/2 mouse port on some IBM ThinkPad models.
them if the device arrives.
This should solve the problem where devices that have been disabled eg. in
the BIOS show up with nonsense resources and hang the bootstrap process.
no longer possible to unload the driver module while sound is playing
(which resulted in a panic).
- Fix a similar problem with the sndstat device that I found while looking
at the above.
- Append a newline character to error messages in pcm_unregister()
Reviewed by: cg
MFC after: 10 days
attempts to set buffered mode was printing out "unable to set buffered
mode" no matter what. Oops.
Spotted by: Joerg Wunsch <joerg_wunsch@uriah.heep.sax.de>
MFC after: 3 weeks
macro. The commit log clearly states that the index given to the
macro is one higher than previously used to index the array. This
wasn't represented in the code and resulted in kernel page faults.
Reported by: Andrew Atrens <atrens@nortelnetworks.com>
kse changes
# Note: There are a number of trivial and non-trivial diffs between this and
# sys/dev/syscons/syscons.c that I didn't try to account for.
Reviewed by: julian, bde, jhb
Reviewed by: audit
Add tunables for the sem* and shm* syscontrols for tuning on boottime
until they become dynamic.
SAP R/3 doesn't like the compiled in defaults.
to locore to process the @fptr relocations in the dynamic executable.
* Don't initialise the timer until *after* we install the timecounter to
avoid a race between timecounter initialisation and hardclock.
* Tidy up bootinfo somewhat including adding sanity checks for when the
kernel is loaded without a recognisable bootinfo.
again? That NEVER works!" "This time for sure!"
Minor overhaul of how we do interrupts for the pci interrupt routing
case to cope with card ejection better (read: make it not hand on so
many cards):
o Reintroduce func_intr and func_arg and use the to store the
interrupt handler to call.
o Create a pcic_pci_func_intr to call the real interrupt handler
iff the card hasn't been ejected.
o Remove some checks in pcic_setup_intr now that it is used
exclusively for isa routed interrupts.
o Defer the eject event until later too, but make sure we can't
do any client driver ISR calling in the interrum.
o Add some simple code to make sure that we don't attach more
than one child. This should fix pccardd starting twice
problem (ala single user -> multi-user when you started pccardd
by hand in SU).
MFC: after jkh thinks I've put the crack pipe away.
- Use some simple #define's at the top of the files for proc -> thread
changes instead of having lots of needless #ifdef's in the code.
- Don't try to use struct thread in !FreeBSD code.
- Don't use a few struct lwp's in some of the NetBSD code since it isn't
in their HEAD.
The new diff relative to before KSE is now signficantly smaller and easier
to maintain.
automatically change the code to add
struct proc *p = td->td_proc;
because now 'td' is probably capable of being NULL too.
I expect to see more of this kind of error during the 'weeding'
process. It's too easy to make. (junior hacker project.. look for these :-)
Submitted by: mark Peek <mp@freebsd.org>
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
dillon in an earlier e-mail.
- We don't need to test the console right before we vfprintf() the panicstr
message. The printing of the panic message is a fine console test by
itself and doesn't make useful messages scroll off the screen or tick
developers off in quite the same.
Requested by: jlemon, imp, bmilekic, chris, gsutter, jake (2)
* Switch to proc0's stack and backing store before calling ia64_init
so that we don't rely on the loader's stack at all.
* Change kernel entry point name from locorestart to __start.
'struct tty' was out of sync in user and kernel due to dev_t/udev_t
mixups. This takes advantage of the fact that dev_t changes type in
userland, so it isn't too pretty.
overflow if uap->nsops (which is already unsigned) is over INT_MAX;
consequently, the bounds check below becomes valid. Previously, if a
value over INT_MAX was passed in uap->nsops, the bounds check wouldn't
catch it, and the value would be used to compute copyin()'s third
argument.
Obtained from: NetBSD
and linux_sendsig functions guarded their debugging output with
ldebug(sigreturn). This has been mistaken for a cut-n-paste bug,
and was replaced by ldebug(rt_sendsig) and ldebug(sendsig) resp.
Since the sendsig functions are not syscalls, this brokei any
build that defines DEBUG.
The fix maps both functions to the unused syscall 0 so that they
can be enabled/disabled independently from sigreturn, but not
independently from each other.
it to the MI area. KSE touched cpu_wait() which had the same change
replicated five ways for each platform. Now it can just do it once.
The only MD parts seemed to be dealing with fpu state cleanup and things
like vm86 cleanup on x86. The rest was identical.
XXX: ia64 and powerpc did not have cpu_throw(), so I've put a functional
stub in place.
Reviewed by: jake, tmm, dillon
correct mode via ancontrol, you can use bpf to sniff raw 802.11 frames.
Who want's to port AirSnort. ;-)
Submitted by: Doug Ambrisko <ambrisko@ambrisko.com> (author)
David Wolfskill <david@catwhisker.org> (port to current)
an array "fs_contigdirs[]" to avoid too many directories getting
created in each cylinder group. The memory required for this and
two other arrays (fs_csp[] and fs_maxcluster[]) is allocated with
a single malloc() call, and divided up afterwards. However, the
'space' pointer is not advanced correctly, so fs_contigdirs and
fs_maxcluster end up pointing to the same address.
Add the missing code to advance the 'space' pointer, and remove
an unnecessary update of the pointer that follows.
This is likely to fix the "ffs_clusteralloc: map mismatch" panics
that have been reported recently.
Submitted by: Luke Mewburn <lukem@wasabisystems.com>
message. Some scsi devices have rather elaberate flags, and it is
hard to know which ones were specified in pccard.conf when debug
information only includes the dmesg.
with the last change to the way the pmap_emulate_reference() works. This
should fix a number of memory corruption problems and also should stop the
mtimes of executables changing all the time.
o Define ELFMAG and SELFMAG as an alternative to test the ELF magic.
ELFMAG is the magic; SELFMAG is the size of the magic. Use with
strncmp() or memcmp().
o Define SHT_NUM as the number of predefined sections.
Note: style(9) deviation for consistency.
me (addition of vn_rdwr_inchunks). The problem Yahoo is solving is that
if you have large process images core dumping, or you have a large number of
forked processes all core dumping at the same time, the original coredump code
would leave the vnode locked throughout. This can cause the directory vnode
to get locked up, which can cause the parent directory vnode to get locked
up, and so on all the way to the root node, locking the entire machine up
for extremely long periods of time.
This patch solves the problem in two ways. First it uses an advisory
non-blocking lock to abort multiple processes trying to core to the same
file. Second (my contribution) it chunks up the writes and uses bwillwrite()
to avoid holding the vnode locked while blocking in the buffer cache.
Submitted by: ps
Reviewed by: dillon
MFC after: 2 weeks
